PROVN OF DEFICIENT TOILETS IN MCPOS BUNGALOWS AT SAILORS MARRIED QUARTERS AND PROVN OF TILLING WORK AT P 22 1 AT INS SHIVAJI LONAVLA

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding and backing coat all as specified and directed.

Demolition of brick work/stone masonry built in cement mortar including all quoins arches, pillars all as directed.

Taking down steel/aluminium windows/ventilator complete with all fittings of any size or any description all as specified and as directed.

Dismantling of roof sheet plain or corrugated any gauge , thickness sheets in roof/chajja etc complete all as specified and directed

Dismantling steel work including doors, gates , structural steel work in roof work and any other specification etc.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Taking up or down 20mm dia bore tubing and connection including cleaning for refixing or removal to store complete all as specified.

Taking up or down 25mm dia bore tubing and connection including cleaning for refixing or removal to store complete all as specified.

S&F in repairs brass chromium plated shower rose with or without swivel joints 75mm size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs 15mm Stop valves cast copper alloy, chromium plated fancy type long shank and cup screwed down, screwed for iron/CPVC pipes high pressure, with crutch or butterfly handle, screwed both ends suitable for pipes.

S&F as in repair CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed , fancy type, 15mm bore.

S&F fancy type Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixedin repair

S&F Vitreous china white flat back of size 580x450mm wash basins, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairs.

S&F in repairs Angle cock, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F stainless steel soap tray fancy type fixed in repair.

S&F 20mm dia towel rail brass chromium plated D type 60cm long between flanges including bracket fixed with stainless screws fixed in repair complete all as specified.

M&L PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and as directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil

M&L for Cement concrete in foundations, filling and mass-concrete Type D2 1:4:8 (40 mm graded aggre-gate)

M&L For Brick work with Sub class "B" bricks,straight or curved on plan not excceding 6m mean raidus built in CM 1:4.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point

Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface

M&L for 75 mm thick cement concrete type B-1, 1:3:6 (20mm graded stone aggregate) as in sub base flooring of pathway complete all as specifed and directed

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in subbase for floor tiles complete all as specified and directed.

Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with water proofing compound @ 3% by weight of cement and applying evenly a coat of blown type bitumen at the rate of 1.5 kg/sqm and blinding with clean dry sand @ 0.05 cum /sqm

M&L for RCC (Nominal Mix) type B0 1:2:4 (12.5 mm graded aggregate ) for lintel band ,floor/roof beam supported on walls, beams and lintel above 1.5 m clear span complete all as specified

Formwork to sides and soffits of lintel band, floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate ) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips on slab, MH cover etc. complete all as specified and directed by Engineer-in-charge.

All as per item above but bars of 8 mm dia

M/L for rendering 15mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment

M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- (a) Apply one coat of bituminous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 4mm thick with non woven polyster reniforcement weighing not less than 4.00 Kg/Sqm applied by torch application method. (d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (e) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm.

M&L for making the grooves 25mm wide and 50mm deep to 'V' section in existing walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves, inserting chajja of PPGI sheet and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed.

M&L for rendering 20mm thick cement plaster in CM 1:4 (12mm as 1st coat and 8mm in finishing coat using water proofing compound on brick/ stone surfaces finished fair and even without using extra cement etc complete all as specified and directed.Note : Water proofing compound and will be measured and paid separately.

Supply only integral water proofing compound.

M&L for rendering 10 mm thick cement plaster in CM 1:6 on brick work/concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified.

M&L for Screed bed or bedding layer of mortar 15mm thick for laying floor finished in cm 1:4.

M&L for rendering 10mm thick in CM 1:3 as in backing coat of as in skirting and glazed tiles in walls.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement ,complete all as specifed and as directed.

S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surfaces such as skirting dados and risers steps etc set and jointed in neat cement slurry and pointed in white cement. Incl cutting the tiles to the required size whereven required incl mitring the corners etc, complete all as specified and directed.

M&L for Rendering 5 mm thick in CM1:3 faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement) for ceilings,

M&L for Preparing newely plastered surface and applying 3 coats of white wash on ceiling

Preparing newly plastered surfaces of walls & applying two coats of 100% premium antifugal acrylic base exterior weather proof paint having VOC less than 50gm /lit and UV resistance , dirt resistance paint of required shade with silicon additives @1.43 lit/10sqm over a coat of exterior primer applied @.90 ltr/10 sqm on external surfaces of wall all as specified and directed .

S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified.

S&F Aluminium bow handles, cast type, anodised 125mm long.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F powder coated aluminium ventilator partly fixed and partly louvered type without sash bar section as per minimum 15 micross anodised including necessary jointing, clip, rubber packing, anodised snap beading crews and 4mm thick pin headed glass etc complete.

S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165.

S&F Vitreous china wash down water closet (Padestal pattern) pan white including bolts and flush pipe, pedestal pan and trap including connections to drain (or outgoing pipe) and flushing pipe etc including seat cover closed type complete all as specified and directed.

S&F 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S&F PVC connection low density polythene pipe 15mm dia, 450mm long, heavy duty with PTMT nuts.

S&F Angle cock, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed , fancy type, 15mm bore.

S&F brass chromium plated toilet paper holder

S&F PVC (SWR) pipes of dia 110mm bore double socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipe of 75mm bore in double socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends of 75mm bore in radius.

S&F PVC (SWR) bends of 110mm bore in radius.

S&F CPVC pipes, SDR 11, 20 mm outer dia conforming to IS-15778 with all fittings such as Tee, bends, elbows, unions sockets and end oieces etc to receive the fittings and fixed with solvent on walls/ceiling or laying in floors complete all as specified.

M&L for health fouset with 1mtr flexible stainless steel pipe complete all as specified and directed.

Steel water tubing medium grade 25mm bore galvanized with all fittings and fixed to walls or through walls / ceiling or laid in floors including cutting, chasing, pining in for concealed portion complete all as specified and directed.

S&F Steel work in tubular roof trusses as in main post, vertical member etc including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grade St-240 & steel painted one shop workshop before fabrication complete all as specified.

S&F Roof trusses (framed), sunshade frames, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W(Gde-E-250) all as specified and directed

Plates (plain or chequered ) channels , square cut or notched (ordinary and counter sunk) forming holes, without any attachement.

S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for Pre- Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L For concrete bed to 150mm dia. Pipe,PCC 1:4:8, type D2( using 40mm graded aggregate. ) Including packing under , and hancuching against the sides of pipes after they are laid and tested.

M& L for 200 mm dia. Reinforced concrete pipe, class NP -2,laid and jointed compete with collars.

Dismantling stone slabs and tiles of any descritpion or thickness in floors/vertical surface etc.

M&L for Vitrified ceramic tiles of any shades 10mm thick (square/rectangular) polished, area of each tile n.exc 0.36 sqm, in floors, skirtings etc set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specifed and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each.

S&F factory made PVC double door frame of size 50 mm x 95 mm made out of 5 mm single side prelaminted PVC sheet reinforced with MS Square tube all as specified and as directed .

S&F for 30 mm Factory made Moulded door shutter - Wood free consisting of frame made out of M.S. tube of 19 gauge thickness and size of 25 mm X 25 mm for stiles, top and bottom rails M.S. frame shall have a coat of steel primer. The inner panel shall consist of 25 mm thick High density EPSconforming to IS 4671-1984 bondedwith 2 mm termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side of the EPS. The edge of the panel is to be sealed with lipping of 10mm wide PVC sheet baton (made by sticking 2 nos , PVC sheets of 5 mmt thickness using PVC solvent cement ) and stile sides 25 mm (5mm x 5)thick and 30mm wide PVC sheet fitted along M.S tube for lock provision & for lock height 5 mm thick PVC sheet of 150 mm x 100 mm fixed with upper & lower face of inner side of EPS panel and manufacturer's specification & drawing etc, complete all as specified and directed.

S&F for 35 mm Factory made Moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness,lipped with 15 mm (5mm x 3) thick x30 mm width on the other stiles & bottom rails & 10mm (5mm x 2) thick x 30 mm width on other stiles & bottom rails , The inner panel laminated with 2 mm thick termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC Lipping and manufacturer's specification & drawing etc, complete all as specified and directed.

S&F for 30 mm thick Factory made fully glazed solid PVC Door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for stile and 15 mm x 15 mm for top, lock and bottom rail MS frame shall have a coat of steel primer of approved make and manufature MS frame shall be covered with 5 mm thick heat moulded PVC C channel of size 75 mm x 30 mm x 50 mm out of which 10 mm shall be bent at 90 degree towards inner side on front face of the door forming stile, for Top and Bottom rail MS frame shall be covered with 5 mm thick, 100 mm wide PVC sheet out of which 10 mm shall be bent at 90 degree towards inner side on front face of the door. MS frame at Lock rail shall be coverved with 125 mm wide PVC sheet out of which 10 mm both the adjust shall be bent at 90 degree on front face of the door and 75 mm wide PVC sheet shall covered the MS frame at top lock and bottom rail on back side of the door 5mm thick 20 mm croos PVC sheet as gap insert for Top and Bottom rail. PVC sheet beading of 10 mm thickness (5 mm x2), 25 mm wide to be stuck internally in the front face of the stiles and rails of the doors and 10 mm thick ( 5mm x 2), 15 mm wide and PVC sheet beading to be stuck internally in the back side of the stiles and rails of door with solvent cement adhesive,stainless steel wire mess will be fitted exteranlly in the clear face availabe between the stile and rails and fixed between PVC sheet of stiles and rails bent at 90 degree on front face 15 mm x 10 mm, 'L' shape outer beading nailed on stiles and rails at the back side so that the 'L' shape PVC beading can be removed when required for replacement of broken wire mess etc and manufacturer's specification & drawing etc, complete all as specified and dir

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding of extruded sections or cast-aluminium alloy and fixed.

S&F 150mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F Aluminium bow handles, cast type, anodised 150mm long.

S&F Harrison curtain rails, anodised aluminium with fixing brackets, stops, rollers etc fixed in repair incl brakets complete all as specified and directed.

M&L in repairs machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

S&F machine cut and machine polished, green marble, 18-20mm thick in single piece as in double stepping on horizontal or vertical surface,as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including backing coat of rendering 10 mm thick in CM 1:3 all as specified and directed.

Machine cut cudappa stone slab 18-20mm thick over cement screed/backing coat15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece for cill, soffit and jambs of windows & ventilators including rubbing and polishing complete all as specified and directed

M&L for 18mm thick both side laminated Medium density fibre board, exterior grade, fixed to timber frame-work with screws fixed in repairs.

M&L for second class clean sawn hardwood in scantling fixed in timber framed work for cupboardframe complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 .

S&F Powder coated aluminium three track, three shutter (equal width) type window miniumum 15 micron anodised with frame made of aluminium sections of size 91.80 x 31.75 x 1.2mm and shutters made out of aluminium sections 39.4 x17.7 x 1.2mm without sash bars including necessary jointing cleats, glazing clips, rubber packing, anodised snap beadings, screws aluminium fittings lockings arragngements etc including 4.00mm thick sheet glass for glazed shutters and stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire gauge shutter all as specified and as directed, before.

Taking down 15mm dia bore GI steel tubing and connection including cleaning and making good dismantaled surface complete all as specified.

Taking down 20mm dia bore GI steel tubing and connection including cleaning and making good dismantaled surface complete all as specified.

Dismantling /taking down PVC/Cast iron soil/waste pipes 100mm/75mm bore including all fitting like bends etc.

S&F Vitreous china white flat back of size 580x450mm wash basins, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairs.

S&F in repairs 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S&F Flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level cistern.

S&F CPVC pipes, SDR 11, 15mm outer dia conforming to IS-15778 with all fittings such as Tee, bends, elbows, unions sockets and end oieces etc to receive the fittings and fixed with solvent on walls/ceiling or laying in floors complete all as specified.

M&L for PVC Bottle trap having miniumum water seal of 25mm. (Miniumum weight 32mm-260gms/40mm-270gms) of 32mm dia.

S&F fancy type Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixedin repair

S&F in repairs Stop valves cast copper alloy, chromium plated fancy type long shank and cup screwed down, screwed for iron/CPVC pipes high pressure, with crutch or butterfly handle, screwed both ends suitable for 15mm pipes.

S&F stainless steel soap tray fancy type fixed in repair.

S&F 20mm dia towel rail chromium plated 60cm long including bracket fixed with stainless screws complete all as specified.

S&F PVC (SWR) branch piece , single (single Y ) equal or unequal of 75mm bore in radius.

S&F PVC (SWR) branch piece , single (single Y ) equal or unequal of 110mm bore in radius.

S&F in repairs acrylic cabinet mirror of size 450mm X600mm fixed with wooden plugs with cromium plated screw and cup washers, complete all as specified and directed, Make shall be of M/s Commander , M/s Jasmine or equivalent.

S&F in repairs brass chromium plated shower rose with or without swivel joints 75mm size, including fixing to steel pipe or union complete all as specified and as directed.

S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Bule star ISI marked.

S&F in repairs stainless steel kitchen plate rack of size 90cm X120cm X 1mm thick (18 gauge)conforming to the sample kept in the office of the AGE B/R , complete all as specified and directed.

Taking down carefully unserviceable aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed. (a) One light point or one fan point or bell point controlled by one switch

All as per item No.115 here in before but wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both (FR) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed. (Note : cutting chases & making good of disturbed surfaces shall be measured and paid separately).

S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed.

S & F Switch socket combination, 5 in 1, 5/15 Amps, 240 volts, flush type complete all as specified and directed.

S & F Ceiling rose, 3 way PVC insulated body complete all as specified and directed by engineer in charge.

M&L lamp holder, PVC/ poly carbonate type with black plate suitable for batten fittings.

Supply and fix Replace/Additiona adore LED lamp 9 Watt confirming to Cat No LHLDEUECNL8R009 of Havell's or euivalent in Philips / Bajaj

Supply and fixing Replace/Additiona LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Crompton or equivlent Bajaj/Philips/Havells

Supply and fixing Replace/Additional LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make: Crompton or equivlent Bajaj/Philips/Havells

Taking down the unserviceable/Repairable geysers (water heater) of any type and size, disconnecting the pipe line connection inlet and outlet connections, dismantling, cleaning geyser tank body properly and removal of scaling etc, refixing the geyser after repair and connecting electric supply and testing of geyser for proper working complete all as specified and as directed.

S &F Replace/Additiona single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 A SP. Make : Standard/Havells/L&T

M&L sub main wiring of PVC FRLS insulated unsheathed two single core 4 sqmm copper multi stranded conductor including one run of single core copper conductor of size 2.5 sqmm as earth wire drawing into PVC conduit complete all as specified and directed.

seema enterprises

SAI SAMARTH ENTERPRISES

DWARKESH STRUCT-CON

RK AND SONS CREATION

M/s S.D Construction Co

MANISH VEDPRAKASH ARORA