Construction of Regional Office Building for NAVODAYA VIDYALA SAMITI at Bhopal (MP)

Sr.No Description of Item Amount DSR-2023 (In ₹) Amount NON DSR (In ₹)

1 Cost of Building Works 5,14,44,233.26 37,79,314.53

2 Boundary Wall Work 58,27,150.09 12,532.50

3 Road Work 25,44,635.71

5 Septic Tank 2,05,340.24

6 Landscaping and Horticulture 1,87,990.15

7 Furniture 65,06,001.49

B. ELECTRICAL SYSTEM

2 SUBMAINS 3,69,924.00

3 EARTHING 3,45,823.66

4 MINIATURE CIRCUIT BREAKER 1,64,949.96

5 MISCELLANEOUS ITEMS 82,324.04 87,612.32

6 LUMINAIRES WORKS 8,61,980.38

7 CABLE TRAY WORKS 1,15,741.57 1,04,308.05

9 DISTRIBUTION CABLE WORKS 4,47,625.05 2,34,525.57

1 LV & CCTV SYSTEM 30,96,934.78

2 FIRE ALARM SYSTEM 17,62,643.21

3 CONFERENCE ROOM 9,73,496.41

D. SUB STATION EQUIPMENT

1 11 KV SUB-STATION 32,83,994.00

2 L.T. SWITCH PANEL BOARDS 2,81,739.80

3 EXTERNAL LIGHTING WORK 3,19,915.11

4 DIESEL GENERATOR200 kVA 29,39,748.68

E. HVAC SYSTEM

2 AIR DISTRIBUTION 4,96,255.68

F. INTERNAL PLUMBING 22,25,852.90 6,36,475.17

G. INTERNAL FIRE FIGHTING 8,41,867.90 52,843.70

H. EXTERNAL WATER SUPPLY 5,67,336.60 23,02,197.61

I. EXTERNAL SEWERAGE 2,70,734.83 1,25,780.00

K. RW HARVESTING 5,49,466.35 0.00

M. EXTERNAL FIRE FIGHTING 19,34,630.24 85,322.80

Digitally signed by MAYANK

Bill of Quantities

Construction of Regional Office for Navodaya Vidyalaya Samiti at Bhopal (M.P.)

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas

2 2.6 (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated

earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation

trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and

ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus

excavated soil as directed, within a lead of 50 m.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil,

6 2.10 and then returning the soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated

soil as directed, within a lead of 50 m :

7 2.10.1 All kinds of soil

8 2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not meter 88.70 549.75 48,762.83

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

11 2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, cum 180.00 196 35,280.00

lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with Jamuna sand / river under floors including watering, ramming

consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15

cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.

15 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

16 2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 120.00 234.75 28,170.00

17 2.35.2.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. metre 90.00 53.45 4,810.50

18 CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the cost of centering

and shuttering - All work up to plinth level

20 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 64.32 6812.00 4,38,120.68

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

Extra for providing and mixing water proofing material in cement concrete work in doses by weight Per 50 kg

of cement as per manufacturer’s specification cement

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg

23 4.13 per square metre on damp proof course after cleaning the surface with brushes and finally with a Sqm 22.12 146.15 3,232.44

piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded

24 4.17 stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, Sqm 78.75 749.30 59,007.38

well rammed and consolidated and grouted with fine sand including finishing the top smooth

25 5.9 Centring and shuttering including strutting, propping etc. and removal of form for:

26 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 316.25 392.15 1,24,017.79

27 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. sqm 240.00 842.50 2,02,200.00

28 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 2167.40 927.25 20,09,721.65

29 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 299.13 736.40 2,20,281.23

30 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 1006.55 961.30 9,67,594.59

Extra for additional height in centering, shuttering where ever required with adequate bracing,

31 5.11 propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m,

for every additional height of 1 metre or part thereof (Plan area to be measured).

32 5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) sqm 300.00 384.30 1,15,290.00

33 5.9.19 Weather shade, chajjas, corbels etc. including edges. sqm 41.60 951.10 39,565.76

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all level & height

35 5.22A.6 Thermo-Mechanically Treated bars kg 115000.00 107.85 1,24,02,750.00

36 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. metre 125.00 78.40 9,800.00

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete

work, using cement content as per approved design mix, manufactured in fully automatic batching

plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work, including

pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering

finishing and reinforcement, including cost of admixtures in recommended proportions as per IS :

9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per

design mix is payable/recoverable separately).

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to either re-design the mix or bear

the cost of extra cement

40 5.33.1 All works upto plinth level

41 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 291.65 9504.75 27,72,060.34

42 5.33.2 All works above plinth level upto floor V level

43 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 461.86 9860.4 45,54,113.93

Add for using extra cement in the items of design mix over and above the specified cement content

Brick work with common burnt clay modular bricks of class designation

7.5 in foundation and plinth in:

47 6..2.2 Cement Mortar 1 :6 (1 cement : 6 coarse sand). Cum 15.48 6295.15 97,462.03

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

49 6.4.2 Cement mortar 1: 6(1 cement: 6 coarse sand) cum 170.69 9105.95 15,54,330.65

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

51 6.13.2 Cement mortar 1:4 (1 cement: 4 coarse sand) sqm 370.12 1123.80 4,15,940.86

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non

53 6.44 modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 Mtr 96.16 59.45 5,716.83

Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer

work), backing filled with a grout of average 12 mm thick in cement mortar 1 :3 (1 cement : 3

55 8.1 coarse sand), including pointing with white cement mortar 1 :2 (1 white cement : 2 marble dust)

with an admixture of pigment to match the marble shade (To be secured to the backing by means

of cramps, which shall be paid for separately).

56 8.1.1 White marble - Raj Nagar plain /udaipur green marble /zebra black marble

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished)

machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of

required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4

(1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish

etc. complete at all levels.

59 8.2.2 Granite of any colour and shade

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine

61 8.3 polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops

of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins / kitchen sink in kitchen

65 8.5 platfrom, vanity counters and similar location in marble / Granite / stone work including necessary Each 10.00 978.70 9,787.00

holes for pillar taps etc. Including rubbing and polishing necessary etc. complete.

Providing and fixing dry cladding upto 10 metre height with 30 mm thick Providing and fixing dry

cladding upto 10 metre height with 30 mm thick

gang saw cut stone with machine cut edges of uniform colour and size

upto 1 mx1 m, fixed to structural steel frame work and/ or with the help of

66 8.20 cramps, pins etc. and sealing the joints with approved weather sealant

as per Architectural drawing and direction of Engineer-in-charge. (The

steel frame work, stainless steel cramps and pins etc. shall be paid for

67 8.20.1 Red sand stone - 30 mm thick gang saw cut stone Sqm 60.00 2902.65 1,74,159.00

68 8.22 Providing and fixing adjustable stainless steel cramps of approved Each 300.00 437.00 1,31,100.00

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

70 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (

hold fast lugs or dash fastener shall be paid for separately).

71 9.1.1 Second class teak wood cum 0.149 142949.70 21,259.48

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick

72 9.12 in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding

portion inside rebate shall be measured).

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type,

73 9.20 core of block board construction with frame of 1st class hard wood and well matched teak 3 ply

veneering with vertical grains or cross bands and face veneers on both faces of shutters.

74 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 8.40 3,473.85 29,180.34

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of

flush door shutters (over all area of door shutter to be measured).

76 9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). sqm

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium

77 9.46 plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary

79 9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and a pair of

lever handles with necessary screws etc. complete (Best make of approved quality).

Providing & fixing IS:3564 marked aluminium Die cast body tubular type universal hydraulic door

closer with necessary accessories and screws etc. complete

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than

83 9.96 grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade

AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with necessary screws etc.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC

90 9.100 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not

93 9.101 less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with

necessary screws etc. complete:

94 9.101.2 Twin rubber stopper Each 5.00 72.35 361.75

Providing and fixing fire resistant door frame of section 50 x 60 mm on Providing and fixing

fire resistant door frame of section 50 x 60 mm onhorizontal side & 35 x 60 mm on vertical

sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than

120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The

frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The

frame will have a provision of G.I. anchor fastners 14 nos (5 each on vertical style & 4 on

horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made

template for SSball bearing

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 Providing and

fixing 60 mm thick glazed fire resistant door shutters of 120minutes Fire rating conforming

to IS:3614 (Part 11) or EN1634-1:1999 tested and certified as per laboratory approved by

Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top

rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6

mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled mineral wool

insulation having density minimum 96 kg/ cum and fixing with necessary stainless steel ball

bearing hinges of size 100x89x3 mm of approved make, including applying a coat of

approved fire resistant primer or powder coating not less than 30 micron etc all complete as

per direction of Engineer-in-Charge (panelling to be paid for seperately).

Providing and fixing glazing in fire resistant door shutters, fixed panels Providing and fixing

glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made

out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm

screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c ,

including applying a coat of approved fire resistant primer/ powder coating of not less than

30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all

respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-

97 9.164 Charge with glass of required thickness having 120 minutes of fire resistance both integrity sqm 7.56 43677.65 3,30,203.03

& radiation control (EW120) and minimum 20 minutes of insulation {El20). The

manufacturer have to give test report/certification of fire glass and the glass should have

the stamp showing the value of E, EW & El. The glass shall be tested in approved NABL

or by any other accreditation body which operates in accordance with ISO/IEC 17011 and

accredited labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible.

The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. sqm

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness

of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined

with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame

98 9.119 profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber metre 121.20 492.70 59,715.24

gasket weather seal to be provided through out the frame. The door frame to be fixed to the

wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification

and direction of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of

M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for

top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and

manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30

99 9.120 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in

45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of

which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to

form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and

20 mm shall be tapered on both sides to form lock rail.

100 9.120.2 30 mm thick pre laminated PVC door shutters sqm 37.80 3663.80 1,38,491.64

101 STEEL WORK

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

103 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 168 172.60 28,996.80

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of

the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,

(for payment purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm

dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m

dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per

direction of Engineer-in-charge.

Marble stone flooring with 18mm thick marble stone as per sample of marble approved by

108 11.23 Engineer-in-charge over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with grey cement slurry including rubbing and polishing complete with :

110 11.24 Extra for pre finished nosing to treads of steps of marble/granite stone. metre 342.55 719.90 2,46,601.75

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be

specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados

over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching

112 kota stone flooring

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement

113 11.26 slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete

with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average)

115 11.27 thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with sqm 10.69 2354.7 25,171.74

pigment to match the shade of the slabs, including rubbing and polishing complete

116 Tile flooring

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse

117 11.41 sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

118 11.41A.1 Double charge vitrified tile polished finish of size

120 11.41A.3 Providing and laying glazed Vitrified tiles/anti skid in floor in different sizes (thickness to be

Providing & laying Polished Granite stone flooring in required design & patterns, in linear as well as

curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm

thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand),

122 11.56.1 laid & jointed with cement slurry & pointing with white cement slurry admixed with pigment of sqm

matching shade, including rubbing, curing & polishing etc. all complete as specified & as directed by

the Engineer-in-Charge.

a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Making khurras 45x45 cm with average minimum thickness of 5 cmcement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat

of neat cement, rounding the edges and making and finishing the outlet complete.

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor

level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with

rabbit wire mesh fixed to with 10 mm gap in between and reinforced with rabbit wire mesh fixed to

wooden frame (frame work to be paid separately):

128 12.31 Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling. sqm 50.00 607.45 30,372.50

130 13.1 12 mm cement plaster of mix :

132 13.16 6 mm cement plaster to ceiling of mix :

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5

coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Extra for plastering exterior walls of height more than 10m from ground level for every additional

height of 3m or part thereof.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare

the surface even and smooth complete.

137 13.37 White washing with lime to give an even shade :

138 13.37.1 New work (three or more coats) Sqm. 300.00 39.05 11,715.00

Distempering with oil bound washable distemper of approved brand and manufacture to give an

140 13.41.1 New work (two or more coats) over and including water tinnable priming coat with cement primer Sqm. 2500.00 185.65 4,64,125.00

141 13.44 Finishing walls with water proofing cement paint of required shade : Sqm. -

142 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) Sqm 1587.00 116.90 1,85,520.30

143 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior

primer applied @ 2.20 kg/10 sqm)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/ 10 sqm)

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content

147 13.81 less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats

wherever required, to achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give

an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint of

approved brand and manufacture

Providing and laying in situ seven course water proofing treatment Providing and laying in situ

seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric

memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th &

6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade

85/25 conforming

to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm

151 14.86 thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron Sqm 530.2 730.55 3,87,337.61

HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on

both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of

class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed

with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement

mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm Providing and fixing Heat

Resistant Terrace Tiles (300 mm x 300 mm

x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70

and initial emittance> 0.75 on waterproof and sloped surface of terrace,

152 12.55 laid on 20 mm thick cement sand mortar in the ratio of 1 :4 (1 cement : 4 Sqm 482 1703.95 8,21,303.90

coarse sand) and grouting the joints with mix of white cement & marble

powder in ratio of 1 :1, including rubbing and polishing of the surface upto

3 cuts complete, including providing skirting upto 150 mm height along

the parapet walls in the same manner.

Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I)

IS:14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames,

backing or studding to be paid

Pre-laminated with decorative lamination on both side

154 9.156.1 exterior Grade - I MDF Board 12 mm thick conforming to Sqm 300 1031.5 3,09,450.00

Providing and fixing plywood 4 mm thick, one side decorative veneer

155 8.28 conforming to IS: 1328 (type-1 ), for plain lining / cladding with necessary

screws, including priming coat on unexposed surface with :

156 8.28.1 Decorative veneer facings of approved manufacture Sqm 300 1430.2 4,29,060.00

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

158 21.1.1 For fixed portion

159 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 582.75 530.90 3,09,381.98

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

160 21.1.2 making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

161 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 233.1 634.45 1,47,890.30

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

162 21.3 EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions

of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

163 21.3.2 With float glass panes of 5 mm thickness(wt not less then 12.5 kg/sqm) sqm 349.65 1505.25 5,26,310.66

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing

164 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge complete.

165 21.8.1 Upto 5mm depth and 5 mm width Metre 267.60 96.75 25,890.30

Providing and fixing double action hydraulic floor spring of approved Providing and fixing double

action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having

brand logo embossed on the body / plate with double spring mechanism and door weight upto 125

kg, for doors, including cost of cutting floors, embedding in floors as required and making good the

same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S.

sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge

167 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness Each 35.00 2823.85 98,834.75

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions

of engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

169 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 291.38 1505.25 4,38,592.22

170 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

171 GLASS DOOR

Providing and fixing 12mm thick frameless toughened glass Providing and fixing 12mm

thick frameless toughened glass door shutter of approved brand and manufacture,

including providing and fixing top & bottom pivot & double acting hydraulic floor spring

type fixing arrangement and making necessary holes etc. for fixing required door fittings,

all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to

be paid separately

Providing and fixing Brass 100mm mortice latch and lock with 6 Providing and fixing Brass

100mm mortice latch and lock with 6 levers without pair of handles (best make of

approved quality) for aluminium doors including necessary cutting and making good etc.

174 Gypsum False Ceiling

Providing and fixing false ceiling at all heights including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating

of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x1 0x0.50 mm of required

length with nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in

a direction perpendicular to G.I. intermediate channel with connecting clips made out

175 12.45 of2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25 mm long dry wall screws@ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm

at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges

of the board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer

suitable for board, all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with :

176 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming sqm 365 1355.8 4,94,867.00

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Providing and supplying aluminium extruded tubular and other aluminium sections as per the

architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or

T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA

177 25.1 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost Sqm 315 414.3 1,30,504.50

of material such as cleats, sleeves, screws etc.necessary for fabrication of extruded aluminium

frame work. Nothingextra shall be paid on this account). The weight of aluminium extruded section

shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in positionsemi (grid) unitized system of structural

glazing (with open joints) forlinear as well as curvilinear portions of the building for all heights and alllevels,

including: (a) Structural analysis & design and preparation of shop drawings

for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times

design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing

panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts,

bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals,

microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire

hazard including: (b) Fabricating and supplying

serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles

etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing

system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor

fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel

grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled,

structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant

of required bite size in a clean and controlled factory / work shop environment, including double sided spacer

tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant

design, within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and

profiles, as required as per the site conditions, to seal the gap between the building structure and all its

interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it

watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if

required), making necessary holes of required sizes and of required numbers etc. complete. This item includes

cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed

units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and

services, cranes or cradles etc. as described above and as specified. The item

includes the cost of getting all the structural and functional design including shop drawings checked by a

structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site,

cost of all samples of the individual components for testing in an approved laboratory, field tests on the

assembled working structural glazing as specified, cleaning and protection till the handing over of the building

for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the

performance characteristics etc. all complete as required, as per the Architectural drawings, as per item

description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow

boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof

stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for

the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-

12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and

specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour and

shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat

strengthned clear float glass 6 mm thick, spacer tube 12 mm wide, dessicants, including primary

seal and secondary seal (structural silicone sealant) etc. all complete for the required performances,

as per the Architectural drawings, as per the approved shop drawings, as specified and as directed

by the Engineerin- Charge. The IGUs shall be assembled in the factory/ workshop of the glass

processor. (Payment for fixing of IGU Panels in the curtain glazing is included in

of item No.25.2) For

payment, only the actual area of glass on face # 1 of the glass panels

(excluding the areas of the grooves and weather silicone sealant) provided and fixed in position,

shall be measured in sqm. (i) Coloured tinted float glass

6 mm thick substrate with reflective softcoating on face # 2, + 12 mm Airgap + 6 mm Heat

Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of

25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading

coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance

glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at

site all accessories and hardwares for the openable panels as specified and of the approved make

such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless

steel plates, handles, buffers etc. including necessary stainless

steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as

per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the

spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by

providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick,

conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded

181 25.5 on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal Sqm 180 2159.65 3,88,737.00

thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass

fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum

sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel

Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels

etc. including:

(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen

principle as required, proper drainage of water to make it watertight including checking of all the structural and

functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in

metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3

mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The

aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF Lumiflon based

fluoropolymer resin coating of approved colour and shade on face# 1 and polymer (Service) coating on face# 2

as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 I MS with Hot Dip Galvanised with serrations and serrated

washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316,

Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and

drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all

samples of the individual components for testing in an approved laboratory, field tests on the assembled

working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with

aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for

ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with

aluminium composite panel cladding, having all the performance characteristics all complete , as per the

Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed

by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of

the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm.

up to two decimal places.

183 WATER PROOFING

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm.

This layer will be allowed to air cure for 4 hours.

184 22.5 (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound Sqm 19.50 617.05 12,032.48

@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48

The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat

strengthened monolithic float glass of approved colour and shade with reflective soft

coating on surface # 2 of approved colour and shade so as to match the colour and

shade of the IGUs in the vision panels etc. ,all complete for the required performances

as specified, as per the Architectural drawings, as per the approved shop drawings, as

specified, and as directed by the Engineer- in- Charge.For payment, only the actual

area of glass on face # 1 of the glass panels (but excluding the area of grooves and

186 25.6 weather silicone sealant) provided and fixed in position, shall be measured in sqm. Sqm 185 2450.15 4,53,277.75

(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of

relevant Item*).“(i) Coloured tinted float glass 6 mm thick substrate with reflective soft

coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35

%, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading

coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc . . The properties of

performance glass shall be decided by technical sanctioning authority as per the site

Design supply & installation of suspended Spider Glazing system designed to withstand the

wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of

SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear

toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly

with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be

connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor

bolts and at the bottom using SS channel of 50x25x2 mm using fastener & anchor bolts,

non staining weather sealants of approved make, Teflon/ nylon bushes and separators to

prevent bi-metallic contacts, all complete to perform as per specification and approved

187 25.8 drawings. The complete system to be designed to accommodate thermal expansion & Sqm 300 9502.35 28,50,705.00

seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the

perimeter & in U channel of the assembly to be filled with non staining weather sealant, so

as to make the entire system fully water proof & dust proof. The rate shall include all

design, Engineering and shop drawing including approval from structural designer, labour,

T&P, scaffolding, other incidental charges including wastage, enabling temporary services

all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated

glass etc. all complete. For the purpose of payment, actual elevation area of Glazing

including thickness of joints and the portion of Glass panel inside the SS channel shall be

WPC wall Paneling - Providing & fixing of prefabricated wpc slatted panels in melamine walnut

188 NS-1 finish (25mm thick) on a system of GI support as per support requirements. Provision to be left Sqm 135 2494.44 3,36,749.05

above the false ceiling for HVAC and MEP conduiting as per MEP drawings

Providng and applying Gypsum plaster over brick work confirming to is code 2547 part 1 & part ii

internally to any thickness as per manufacturer instruction at all floor and heights, finish smooth to

correct line and levels , plain and plumb including preparation of the surface as per specification,

designs, drawing. The rates are inclusive of providing G.I / PVC chicken wire mesh of 18 gauge and

300 mm width at the junction of brick, siporex, blockwork and r.c.c. member,scaffolding, complete

as per Architect / Project Manager instruction.

Digitally signed by MAYANK

Rate (DSR-2023) NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty AMOUNT (In ₹) NS AMOUNT (In ₹)

Providing & fixing of Acoustic Panelling (AP-03) made up of 50mm x25mm x 2mm MS frame

fixing with necessary arrangements as required fixing at a distance grid of 600mm c/c in both the

directions fixing to the slab/wall of the building and supported with fasteners, angles etc as per site

requirements and covered with 12mm thick Acoustic panelling finished in line and level with

joints to be cleaned filled and as per details showing in Elevation drawing. The work includes

190 NS-3 provision of any required opening for MEP services etc. Rate is inclusive of cost of materials, sqm 60 4523.57 2,71,413.98

providing patterns, provision of any required opening for MEP services etc all necessary hardware,

cutting, labour, scaffolding all lead and lifts at all levels, loading and unloading, transportation and

all other incidental charges etc. completed in all respect as per drawing, designs and as directed by

the Engineer-in-charge.

WPC false ceiling - Providing & fixing of prefabricated wpc slatted panels in melamine walnut

191 NS-4 finish (25mm thick) on a system of GI support as per support requirements. Provision to be left sqm 100 2494.44 2,49,443.74

above the false ceiling for HVAC and MEP conduiting as per MEP drawings

192 NS-5 Providing & Fixing calcium silicate ceiling & pannelling sqm 72 1851.64 1,33,318.09

Providing & fixing Pre cast concrete Saucer Drain 300 x 300 x 100/75 mm with required slop to

match the connection drain with concrete 1:2:4 finished joint.

194 ANTI TERMITE TREATMENT

Diluting and injecting chemical emulsion for PRE - CONSTRUCTIONAL anti-termite treatment under

floor using chemical emulsion (excluding the cost of chemical emulsion):

Treatment of soil once the excavation is over the entire carpet area shall be chemically treated by

making 12 mm dia holes at 150 c/c and 50-75 mm deep and applying insecticide emulsion under

pressure @5l/sqm of the horizontal surface area (as per IS code 6313 (part 2)) This treatment shalll

be carried out on the top surface of the soil filling and on the backfilling the soil filled along with

retaining wall of the basement shall be treated in layers of 500 mm from the base to ground level ,

with Chloropyriphos /Lindane EC 20% with 1% concentration.

197 NS-8 LIFTS

Design, manufacture, Supply, Installation, Testing & Commissioning of 13 passenger gearless lift

electric traction, (MRL) MACHINE ROOM LESS having contract speed of 1.5 Meter per second

serving different floors as per detailed specifications attached and as under complete with all the

equipment and accessories.

199 Lift shaft size 1900 mm (Width) x 2500 mm (Depth) and 1600 mm pit depth.

201 Stop & Opening - 04 Stop & 04 Opening (all opening be on same side)

202 Controller - V3F (Variable Voltage Variable Frequency)

203 Automatic Rescue Device (ARD) complete with dry maintenance free batteries as required.

204 Operation - Microprocessor based Duplex control

205 Power: 415 Volts ± 10%, 3 Phase 4 wire 50 Hz AC system.

206 Car Enclosure: Stainless steel (Hairline Finish)

207 Car doors: Stainless steel (Hairline Finish)

208 Landing doors: Stainless steel (Hairline Finish)

209 Car entrance door opening arrangement: CO (Center Opening Doors)

210 Handrail on rear wall of car in SS hairline Finish

211 Full length Mirror on rear wall of car

Lifts should be with following: Voice announcement system, Car Arrival Chime, DC alarm bell, Multi

beam sensor, Safety landing operation, Next landing operation, Independent operation, Hand

operation (slow speed maintenance operation), Braille Buttons, Emergency stop button, Emergency

cabin lighting, Emergency interphone system incorporated on cabin operating panel, Re-open with

212 hall call button operation, Automatic door open time adjustment operation, Car call registered

light, Hall call registered light, Emergency Exit, Ventilation Fan, Overload Indicator, Attendant

Service, Emergency Landing Device, flat cable with camera and internal intercom. Car operating

panel and car position indicator face plates finish: LED Indicator Provided in stainless steel hairline

213 TOTAL AMOUNT OF PASSENGERS AS DESCRIBED ABOVE SET 2 1235835.43 2471670.9

213 TOTAL AMOUNT OF PASSENGERS AS DESCRIBED ABOVE SET 2 1235835.43 2471670.9

Providing and fixing 24 gauge- chicken wire mesh at the junction of masonry work and RCC work or

214 NS-9 on any other place as directed to receive plaster including fixing with nails, raw plugs at all heights sqm 230.40 240.09 55315.9

below and above highest plinth level including scaffolding etc complete as directed.

Manufacturing, supplying and fixing signage board .Providing and fixing signages on the wall or

with any other required structure . Each signboard to be fixed strictly as per the Harmonised

215 NS-10 Guidelines & Space Standards for Barrier Free Built Environment for persons with Disability, issued

By MOUD, Govt. of India, and as as per approved drawings and complete as per the directions of

Engineer – In – Charge.

216 a Light board with Tube Light and frame Sqm 5 3318.15 16590.7

217 b Sun board vinyl 3 mm thick Sqm 15 1253.52 18802.8

218 c Sun board vinyl 5 mm thick Sqm 10 1401.00 14010.0

219 d ACP Sheet Board Sqm 5 1401.00 7005.0

220 e Acrylic Sign Board Sqm 5 3465.62 17328.1

Digitally signed by MAYANK

Construction of Regional Office for Navodaya Vidyalaya Samiti at Bhopal (M.P.)

AMOUNT (In NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) NS AMOUNT (In ₹)

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in

2 2.6 width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-

Filling available excavated earth (excluding rock) in trenches, plinth, sides

of foundations etc. in layers not exceeding 20cm in depth, consolidating

4 2.25 each deposited layer by ramming and watering lead upto 50 mtrs. and lift cum 343.49 196 67,325

5 CONCRETE WORK

Providing and laying in plane cement concrete of specified grade

6 4.1 excluding the cost of centering and shuttering - All work up to plinth level

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm

Centring and shuttering including strutting, propping etc. and removal of

9 5.9 form for:

10 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 177.84 392.15 69,740

11 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 192.6 736.4 1,41,831

12 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts sqm 230.64 961.3 2,21,714

Providing and laying in position machine batched, machine mixed and

machine vibrated design mix M-25 cement concrete of specified grade for

reinforced cement concrete work including pumping of concrete to site of

laying but excluding the cost of centring, shuttering, finishing and

reinforcement-including admixture in recommended proportions as per

IS:9103 to accelerate, retard setting of concretre, improve workability

without impairing strength and durability as per direction of Engineer-in-

Note-cement content considered in this item is @330kg/cum. Excess/less

14 cement used as per design mix is payable /recoverable separately ).

15 5.33.2.1 All works above plinth level upto floor five level Cum 83.93 9860.4 8,27,623

Steel reinforcement for R.C.C. work including straightening, cutting,

16 5.22 bending, placing in position and binding all complete upto plinth level

17 5.22.6 Thermo-Mechanically Treated bars Kg. 8393.40 107.85 9,05,228

18 BRICK WORK:

6.4 Brick work with F.P.S. bricks of class designation 7.5 in superstructure

19 above plinth level up to floor V level in all shapes and sizes in:

20 6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 70.84 9105.95 6,45,042

21 STEEL WORK -

10.25 Steel work welded in built up sections/ framed work including cutting,

22 hoisting, fixing in position and applying a priming coat of approved steel -

primer using structural steel etc. as required.

Structural steel work in single section, fixed with or without connecting

23 10.25.2 plate, including cutting, hoisting, fixing in position and applying a priming kg 7577.50 172.6 13,07,877

coat of approved steel primer all complete

Providing corrugated G.S. sheet roofing including vertical/ curved surface

Providing corrugated G.S. sheet roofing including vertical/ curved surface

fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter

with bitumen and G.I. limpet washers or with G.I. limpet washers filled

with white lead, including a coat of approved steel primer and two coats

of approved paint on overlapping of sheets complete (up to any pitch

in horizontal/ vertical or curved surfaces), excluding the cost of purlins,

rafters and trusses and including cutting to size and shape wherever

25 12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m2 Sqm 270.60 1457.15 3,94,305

26 FINISHING WORK -

Finishing with Deluxe Multi surface paint system for interiors and

27 13.48 exteriors

using Primer as per manufacturers specifications :

Digitally signed by MAYANK

AMOUNT (In NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) NS AMOUNT (In ₹)

Two or more coats applied on walls @ 1.25 ltr/10 sqm over

28 13.48.1 and including one coat of Special primer applied @ 0.75 ltr Sqm 1087.50 193.7 2,10,649

Wall painting with premium acrylic emulsion paint of interior grade,

29 13.83 VOC (Volatile Organic Compound ) content less than 50 grams/ litre of

approved brand and manufacture, including applying additional coats

wherever required to achieve even shade and colour.

Finishing walls with Premium Acrylic Smooth exterior paint with

31 13.47 "Silicone additives of required shade

New work (two or more coats applied @1.43 ltr/10 sqm over and

32 13.47.1 including base coat of water proofing cement paint applied Sqm 1087.50 171.1 1,86,071

13.2 15 mm cement plaster on the rough side of single or half brick wall of mix

Providing and fixing 24 gauge- chicken wire mesh at the junction of

masonry work and RCC work or on any other place as directed to receive

plaster including fixing with nails, raw plugs at all heights below and

above highest plinth level including scaffolding etc complete as directed.

36 16.53 Fixing of Cencertina Coil 600 ø Metre 174.00 375.8 65,389

G. TOTAL 58,39,683

Digitally signed by MAYANK

Construction of Regional Office for Navodaya Vidyalaya Samiti at Bhopal (M.P.)

(DSR- AMOUNT (In NS AMOUNT (In

Sr.No Description of Item Unit Total Qty 2023) Rate

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m in

1 width or 10 sqm on plan) including dressing of sides and ramming of

bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil. Cu

3 2.28 Surface dressing of the ground including removing vegetation 235 34.15 8,025

16.1 Preparation and consolidation of sub-grade with power road roller of 8 to

12 tonne capacity after excavating earth to an average of 22.5cm depth,

4 dressing to camber and consolidating with road roller including making sqm 235 218.90 51,442

good the undulations etc. and re-rolling the sub-grade and disposal of

surplus earth lead upto 50 mtr.

Providing and laying in plane cement concrete of specified grade excluding

5 4.1 the cost of centering and shuttering - All work up to plinth level -

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal Cu

Centering and shuttering including strutting, propping etc. and removal

of form work for :

8 4.3.1 Foundations, footings, bases for columns sqm 76.5 392.15 29,999

Providing and laying C.C. pavement of mix M-25 with ready mixed

Providing and laying C.C. pavement of mix M-25 with ready mixed

concrete from batching plant. The ready mixed concrete shall be Cu

laid and finished with screed board vibrator , vacuum dewatering m

process and finally finished by floating, brooming with wire brush

etc. complete as per specifications and directions of Engineer-incharge.

(The panel shuttering work shall be paid for separately).

5.22 A Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

11 5.22A.6 Thermo-Mechanically Treated bars kg 1600 107.85 1,72,560

Providing and laying at or near ground level factory made kerb stone

of M-25 grade cement concrete in position to the required line, level

and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse

sand), including making joints with or without grooves (thickness of

joints except at sharp curve shall not to more than 5mm), including Cu

making drainage opening wherever required complete etc. as per m

direction of Engineer-in-charge (length of finished kerb edging shall

be measured for payment). (Precast C.C. kerb stone shall be approved

by Engineer-in-charge).

Providing and laying 60mm thick faciory made cement concrete

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design

& shape, laid in required colour and pattern over and including 50mm

thick compacted bed of coarse sand, filling the joints with line sand

etc. all complete as per the direction of Engineer-in-charge

6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cu

Providing and fixing 18mm thick gang saw cut mirror polished premoulded

and prepolished) machine cut for kitchen platforms, vanity counters,

window sills , facias and similar locations of required size of approved

shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1

cement : 4 coarse sand) with joints treated with white cement, mixed with

matching pigment, epoxy touch ups, including rubbing, curing, moulding

and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XO) on

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XO) on

150 mm thick sub grade of compacted bed of 20 mm thick nominal size

stone aggregate and base course and filling with 150 mm thick Jamuna

sand, including spreading, well ramming, consolidating and finishing

smooth etc. all complete as per direction of Engineer-in-charge

Total 25,44,636

Digitally signed by MAYANK

Construction of Regional Office for Navodaya Vidyalaya Samiti at Bhopal (M.P.)

AMOUNT (In NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) NS AMOUNT (In ₹)

Earth work in excavation by mechanical means (Hydraulic excavator)

/ manual means over areas (exceeding 30cm in depth. 1.5 m in width

as well as 10 sqm on plan) including disposal of excavated earth,

lead upto 50m and lift upto 1.5m, disposed earth to be levelled and

neatly dressed.

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering lead upto

50 mtrs. and lift upto 1.5 mtr.

4 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 2.89 392.15 1134.88

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

6 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 51.27 843.5 43249.62

Providing and laying in position ready mixed M-25 grade concrete for

reinforced cement concrete work, using cement content as per approved

design mix, manufactured in fully automatic batching plant and

transported to site of work in transit mixer for all leads, having

continuous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work, including pumping of

R.M.C. from transit mixer to site of laying , excluding the cost of

7 5.33 centering, shuttering finishing and reinforcement, including cost of

admixtures in recommended proportions as per IS : 9103 to accelerate/

retard setting of concrete, improve workability without impairing

strength and durability as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/recoverable

8 5.33.1.1 All works below plinth level Cum 59.82 9504.75 568603.61

Steel work welded in built up sections/ framed work including cutting,

9 10.25 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

Steel reinforcement for R.C.C. work including straightening, cutting,

10 5.22 bending, placing in position and binding all complete upto plinth level

11 5.22.6 Thermo-Mechanically Treated bars Kg. 4785.85 107.85 5,16,154

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS:10910 on 12mm dia steel bar comforming to

IS:1786 having minimum cross section as 23mm x 25mm and over all

minimum length 263 mm and width as 165mm with minimum 112mm

space between protruded legs having 2mm tread on top surface by

ribbing or chequiring besides necessary & adequate anchoring

projections on tail length on 138mm as per standard drawing and

suitabbe to with stend the bend test and chemical resistance test as per

specifications and having manufacture's permanent identification mark

to be visible even after fixing, including fixing in manholes with

30x20x15cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6

graded stone aggregate 20mm nominal size) complete as per design.

14 Water Proofing Work

Providing and laying water proofing treatment in sunken portion of

bathroom etc., by applying cement slurry mixed with water proofing

cement compound consisting of applying :(a) First layer of slurry of

cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed

to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water

proofing cement compound @ 0.126 kg/sqm. This layer will be allowed

air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed

Total 15,38,632

Digitally signed by MAYANK

Construction of Regional Office for Navodaya Vidyalaya Samiti at Bhopal (M.P.)

Rate (DSR-2023) AMOUNT (In NS Rate

Sr.No (DSR-2023) Description of Item Unit Total Qty NS AMOUNT (In ₹)

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth,

1 2.6 1.5 m in width as well as 10 sqm on plan) including getting out

and disposal of excavated earth lead upto 50 m and for all lift, as

directed by Engineer-in-charge.

2 2.6.1 All kinds of soil Cum 21.546 177.5 3,824

Providing and laying in plane cement concrete of specified grade

3 4.1 excluding the cost of centering and shuttering - All work up to

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm

Centering and shuttering including strutting, propping etc.

and removal of form work for :

6 4.3.1 Foundations, footings, bases for columns sqm 1.64 392.15 643

6.4 Brick work with common burnt clay F.P.S ( non modular ) bricks

7 of class designation 7.5 in superstructure above plinth level up to

floor V level in all shapes and sizes in:

8 6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 6.5 9105.95 58,818

Cement plaster skirting up to 30 cm height, with cement mortar

9 1:3 (1 cement : 3 coarse sand), finished with a floating coat of

11.6 neat cement

10 11.6.1 18 mm Cement plaster sqm 36.2 662.05 23,989

Providing and laying in position ready mixed M-25 grade

concrete for reinforced cement concrete work, using cement

content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit

mixer for all leads, having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced

cement concrete work, including pumping of R.M.C. from transit

mixer to site of laying , excluding the cost of centering, shuttering

finishing and reinforcement, including cost of admixtures in

recommended proportions as per IS : 9103 to accelerate/ retard

setting of concrete, improve workability without impairing

strength and durability as per direction of the Engineer - in -

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/recoverable

12 5.33.1.1 All works upto plinth level. Cum 1.7955 9504.75 17,066

Steel reinforcement for R.C.C. work including straightening,

13 5.22 A cutting, bending, placing in position and binding all complete

above plinth level.

14 5.22A.6 Thermo-Mechanically Treated bars Kg 359.1 107.85 38,729

10.25 Steel work welded in built up sections/ framed work including

15 cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 100 172.6 17,260

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS:10910 on 12mm dia steel bar

comforming to IS:1786 having minimum cross section as 23mm

x 25mm and over all minimum length 263 mm and width as

165mm with minimum 112mm space between protruded legs

having 2mm tread on top surface by ribbing or chequiring

17 19.16 besides necessary & adequate anchoring projections on tail length Each 6 553.7 3,322

on 138mm as per standard drawing and suitabbe to with stend

the bend test and chemical resistance test as per specifications and

having manufacture's permanent identification mark to be visible

even after fixing, including fixing in manholes with 30x20x15cm

cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded

stone aggregate 20mm nominal size) complete as per design.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm

18 19.32 dry brick honey comb shaft with bricks and S.W. drain pipe 100

mm diameter, 1.8 m long complete as per standard design.

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

Centrifugally cast (spun) iron socketed pipe as per IS:3989.S&S

22 17.56 Providing and fixing terminal guard

23 17.56.1.2 Sand Cast iron S&S as per IS-3989

Total 2,05,340

Digitally signed by MAYANK

Landscaping & Horticulture

Construction of Regional Office for Navodaya Vidyalaya Samiti at Bhopal (M.P.)

Horticulture NS Rate

Sr.No Description of Item Unit Total Qty 2023) AMOUNT (In ₹) NS AMOUNT (In ₹)

Trenching in ordinary soil up to a depth of 60 cm including removal and

Trenching in ordinary soil up to a depth of 60 cm including removal and

stacking of serviceable materials and then disposing of surplus soil, by

1 2.1 spreading and neatly levelling within a lead of 50 m and making up the Cum 80 78.1 6248

trenched area to proper levels by filling with earth or earth mixed with sludge

or / and manure before and after flooding trench with water (excluding cost of

imported earth, sludge or manure).

Supplying and stacking at site dump manure from approved source, Supplying

and stacking at site dump manure from approved source, including carriage

upto 5 km lead complete (manure measured in stacks will be reduced by 8%

3 2.4.2 Screened through sieve of I.S. designation 16 mm Cum 40 290.7 11628

Digging holes in ordinary soil and refilling the same with the excavated

Digging holes in ordinary soil and refilling the same with the excavated earth

mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked

4 2.14 volume of earth after reduction by 20% : 1 part of stacked volume of manure

after reduction by 8%) flooding with water, dressing including removal of

rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge

or extra good earth if needed to be paid for separately)

5 2.14.1 Holes 1.2 m dia and 1.2 m deep Each 335.50 Each 25 335.5 8387.5

6 2.14.2 Holes 90 cm dia, and 90 cm deep Each 143.10 Each 3 143.1 429.3

7 2.14.3 Holes 60 cm dia, and 60 cm deep Each 43.75 Each 3 43.75 131.25

8 2.14.4 Holes 45 cm dia, and 45 cm deep. Each 3 18.7 56.1

Grassing with selection No. 1 Doob grass including watering and Grassing

with selection No. 1 Doob grass including watering and maintenance of the

9 2.10 lawn for 30 days or more till the grass forms a thick lawn, free from weeds and

fit for mowing including supplying good earth, if needed (the grass and good

earth shall be paid for separately).

10 2.10.2 With grass Turf Sqm 400 13.3 5320

Filling mixture of earth and sludge or manure in the desired proportion in

Filling mixture of earth and sludge or manure in the desired proportion in

trenches, flooding with water and leveling (cost of supplying earth and sludge

or manure and mixing excluded).

Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20

Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre

above ground level and 0.40 metre below ground level. The vertical members

shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at

each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical

mambers shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally

around the vertical member of the cage. One name plate of 1 mm thick M.S.

sheet of size 250x100 mm shall be welded to the tree guard near the middle

height and lettered CPWD/ PWD/ any other approved name. The tree guard

shall be fixed to the ground by making suitable holes and by embedding four

corners leg in the ground, including refilling the earth, compaction etc.

complete. The tree guard shall be painted with two or more coats of synthetic

enamel paint of approved brand and manufacture over a coat of primer,

complete in all respect.

13 2.7 Fine dressing of the ground. Sqm 140 3.7 518

Mixing earth and sludge or manure in the required proportion specified or

14 2.9 Mixing earth and sludge or manure in the required proportion specified or Cum 25 36.55 913.75

directed by the Officer-in-charge

Providing Circular Cement Concrete pots of specified size, cast with cement

Providing Circular Cement Concrete pots of specified size, cast with cement

concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone

aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4

nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including

required form work, finishing with cement punning on exposed surface, curing

for specified period and stacking in required rows & height, all complete as per

direction of Officer-in-charge.

Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall

thickness of 25.4 mm

Providing Circular Cement Concrete pots of specified size, cast with cement

Providing Circular Cement Concrete pots of specified size, cast with cement

concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone

aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4

17 2.3 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including 0

required form work, finishing with cement punning on exposed surface, curing

for specified period and stacking in required rows & height, all complete as per

direction of Officer-in-charge.

Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall

thickness of 25.4 mm

Anti termite treatment of lawn area through premise 30.50% I P. one liter Anti

termite treatment of lawn area through premise 30.50% I P. one liter premise

diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm

lawn or bed area.(two application) i/c cost of chemical)and as per direction of

officer-in-charge.and as per direction of officer-in-charge. Per sqm 7.55

Digitally signed by MAYANK

Horticulture NS Rate

Sr.No Description of Item Unit Total Qty 2023) AMOUNT (In ₹) NS AMOUNT (In ₹)

Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30

cm and above Providing and Displaying Budded Rose (H.T. variety) 3 to 4

healthy branch 30 cm and above ht. well developed with one and above flower

plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.

Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm

and above ht. well Providing and Displaying Creeper Rose variety 3 to 4

healthy branch 60 cm and above ht. welldeveloped with one and above flowers

in 25 cm Earthen Pot, as per direction of the officer-incharge.

Providing and Displaying of Standard Rose (H.T. variety) 3 to 4 healthy branch

22 4.93 90 cm and Providing and Displaying of Standard Rose (H.T. variety) 3 to 4 Each 29 150.7 4370.3

healthy branch 90 cm and above ht. well developed with one and above flowers

in 25 cm Earthen Pot, as per direction of the officer-in-charge

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry

palmar, Cherry Providing and Displaying Bougainvillea named variety, Sobhra,

Thima, Marry palmar, Cherry Blossom etc. well developed with fresh &

healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per

direction of the officer-in-charge.Providing and Displaying Bougainvillea

named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well

developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40

cm Cement Pot as per direction of the officer-in-charge.Providing and

Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry

Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75

to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant,

having 30 to 40 with Providing and Displaying Cycus revoluta in 35 cm challi,

24 5.14 specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to Each 8 1183.9 9471.2

30cm circumfrance of base stem well developed as per direction of the officer-

Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht.,

with fresh and Providing and Displaying Cyprus Golden Conical Shape 150 to

165 cm ht., with fresh andhealthy Golden colour foliage in 35cm Cement Pot as

per direction of the officer-in-charge

Providing and Displaying Ficus Long Island Topiary well developed with fresh

27 5.21 & healthy 5 to Providing and Displaying Ficus Long Island Topiary well Each 10 1230 12300

developed with fresh & healthy 5 to 6 ball specific size and shape 120 to 150

cm ht in 40 cm Cement Pot as per direction of the officer-in-charge

Providing and Displaying Foxtail palm well developed with fresh & healthy

foliage of ht. 210 Providing and Displaying Foxtail palm well developed with

fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per

direction of the officer-in-charge.

Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm

multi branched in Providing and stacking of Clerodendrum inerme having ht.

25 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as

per direction of the officer-in-charge.

Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape

with fresh and 6.12 Providing and stacking of Duranta Golden, having ht.15 to

20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot /

Plastic Pot & as per direction of the officer-incharge

Providing and stacking of Iresine herbstii, of height 20-30 cm., full of branches

well developed Providing and stacking of Iresine herbstii, of height 20-30 cm.,

full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot & as

per direction of the officer-in-charge..

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in

big polybag of Providing and stacking of Azadirachta indica ( Neem ) of height

120-130cm in big polybag of size 25 cm as per direction of the officer-in-

Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm

well developed Providing and stacking of Bottle palm of ht. 270-300 cm

bottom girth 40-50 cm well developed in big HDPE bags as per direction of the

officer-in-charge

Providing and stacking of Callistemon lanceolatus of height 150-165 cm. in big

34 7.14 poly bags of Providing and stacking of Callistemon lanceolatus of height 150- Each 10 65 650

165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in

big poly bags of Providing and stacking of Delonix regia (Gulmohar) of height

150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-

Providing and stacking of Ficus nuda of height 150-165 cm., bushy with

healthy branches Providing and stacking of Ficus nuda of height 150-165 cm.,

bushy with healthy branches and lush green foliage in big size HDPE bags as

per direction of the officer-in-charge.

Grassing with selection No. 1 Doob grass including watering and Grassing

with selection No. 1 Doob grass including watering and maintenance of the

2.1 lawn for 30 days or more till the grass forms a thick lawn, free from weeds

and fit for mowing including supplying good earth, ifneeded (the grass and

good earth shall be paid for separately).

2.10.2 With grass Turf Sqm 300 13.3 3990

Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly

7.9 Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly Each 1 70 70

bags of size 25 cm as per direction of the officer-in-charge

Digitally signed by MAYANK

Horticulture NS Rate

Sr.No Description of Item Unit Total Qty 2023) AMOUNT (In ₹) NS AMOUNT (In ₹)

Total 1,87,990

Digitally signed by MAYANK

Furniture Items

S No Description Qty Unit Rate

Location Image

Providing and placing in position of double bed of Dimension: 1910mm(L) x

2082mm(D) x 1050mm(H). Complete structure ( headboard frame, tail board frame and side frame)

1 NS-12 DOUBLE BED OF SIZE - 1 Nos 33551.55 33,552 BEDROOM

made out of 18mm thk Pre-Lam MDF Board and bottom made out of 12mm thk Pre-Lam MDF

Board with Matching PVC lipping. ( ± 5% Varaition allowed).

Providing and placing in position of Bed Side Table of Dimension: 450 (L) x 40mm(D) x

450mm(H). Complete structure (Top Bottom and side frame) made out of 18 mm thk Pre-Lam

2 NS-13 BED SIDE TABLE - 2 Nos 2368.34 4,737 BEDROOM

MDF Board and Back made out of 9mm thk Pre-Lam MDF Board with Matching PVC lipping.

( ± 5% Varaition allowed).

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm. Supplying, and placing in position of sofa

as per Image.A supple Camel Brown premium Leatherette upholstery adds class to the soft cushioned

backrest and seating. The rate of high quality Leatherette used shall be approx Rs. 350/ mt. Sitting

proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material &

subtype:Premium Leatherette, Colour & Colour Family:Brown-Camel Brown, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid RECEPTION

3 NS-14 2 SEATER SOFA 4 Nos 13420.62 53,682

wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of AREA

density 35-38 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The unit

should be complete as per image, and specification under the guidance of Engineer in charge. ( ± 5%

Varaition allowed)

1 seater Dimension(L) 960mm X (D)750mm X (H) 710mm. Supplying, and placing in position of sofa

as per Image.A supple Camel Brown premium Leatherette upholstery adds class to the soft cushioned

backrest and seating. The rate of high quality Leatherette used shall be approx Rs. 350/ mt. Sitting

proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material &

subtype:Premium Leatherette, Colour & Colour Family:Brown-Camel Brown, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid RECEPTION

4 NS-15 SINGLE SEATER SOFA 2 Nos 0.00 0

wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of AREA

density 35-38 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The unit

should be complete as per image, and specification under the guidance of Engineer in charge. ( ± 5%

Varaition allowed)

Providing and placing in position wooden side table of size 600mm x 600mm 450mm made up of teak

wood frame work. The top having 12mm thick float glass with decorative edge moulding, the unit RECEPTION

5 NS-16 SIDE TABLE 3 Nos 5591.93 16,776

having ornamental legs including melamine polishing, all complete as per approved sample and as per AREA

direction of Engineer-in- charge. ( ± 5% Varaition allowed)

Providing and placing in position wooden centre table of size 1200mm x 600mm 450mm made up of

teak wood frame work. The top having 12mm thick float glass with decorative edge moulding, the unit RECEPTION

6 NS-17 CENTER TABLE 2 Nos 9539.17 19,078

having ornamental legs including melamine polishing, all complete as per approved sample and as per AREA

direction of Engineer-in- charge. ( ± 5% Varaition allowed)

Providing, and placing in position of reception Table Size 2100 X 750 X 1100mm.The Table top

made up of 25 mm thick BWR plywood (IS:303 grade) with 0.8mm thk post lamination with

COREAN TOP and understructure shall be made out of 25mm thick BWR plywood with

0.8mm post lamination. Modesty & side panel shall be 25mm thk BWR plywood with 0.8mm thk

post lamination . Table top height will be 750mm with 600mm width from the floor level for inner side

& one additional top height 1100 mm with width 300mm from the floor level in front modesty .

RECEPTION TABLE - RECEPTION

7 NS-18 The working edges shall be provided with machine pressed 2mm thick PVC edging using special 1 Nos 361830.48 3,61,830

2100X750X1100 MM AREA

hot melt glue at hot temperature. Provision of BWR Plywood with post laminate Mobile

pedestal of size 400mm(L) x 450mm(D)x600mm(HT) (2 drawer + 1filling). Pedestal Top

made out of 18mm thick BWR plywood with post laminate and rest all storage to be made out of 18

mm thick BWR plywood with post lamainate . All exposed edges shall be provided with machine

pressed 2 mm thick PVC lipping glued with hot melt EVA glue. All exposed surface shall be cover with

COREAN.(± 5% Varaition allowed)

High back chair with ergonomic design. The seat shall be made of 15mm thick hot pressed commercial

plywood upholstered with high resilience molded polyurethane foam 50mm thick having density

40kg/m³ with fabric tapestry and the back shall be made of two piece injection molded polypropylene

net cover upholstered with breathable mesh tapestry. The base of the seat shall be supplied with PP

cover and the backrest shall be made by keeping the natural curvature of the spine and cushion base

adjustable lumbar support which helps to provide full back support as well as head support. The chair

shall be supplied with black integral 3D adjustable polyurethane arm having sliding, up-down, to & fro

8 NS-19 HIGH BACK CHAIR motion. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with 1 Nos 7105.03 7,105

upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 120mm with class-3 gas-lift to suit them using the lever under

the seat. The pedestal should have five legged injection molded in 30% glass filled nylon having pitch

circle dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection

molded in black 30% glass filled nylon. The seat length shall be 750±10 mm and depth shall be 750±10

mm. Overall height shall be = 1100±20 mm to 1220±20 mm, with adjustable seat height 500-620mm.

(± 5% Varaition allowed)

(Providind and Supplying round table of size 1000mm dia . The Worktop shall be made of 25mm

ROUND TABLE - DIA- Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the

9 NS-20 1200MM X 750MM exposed edges are finished with 2mm thick PVC lipping machine pressed. Understructure is made of 6 Nos 7236.61 43,420 CANTEEN

ROUND TABLE-1 18mm Prelaminated Particle Board and fixing is through Minifix / Dowels. The above furniture should

be as per specification and sample approved by client.( ± 5% Varaition allowed)

Digitally signed by MAYANK

S No Description Qty Unit Rate

Location Image

Providing and supplying Stool / Chair for table . The stool has Wooden Coloured base with foot

support . It has plastic seat shell with Cushioned Seat wrapped in Leatherite / Fabric . Seat dimensions

10 NS-21 CANTEEN CHAIR 24 Nos 6249.80 1,49,995 CANTEEN

are 380 - 420 mm W x 365 - 400 mm D , Back dimensions are 245 - 350 mm Ht - 350 . 420 mm W .(

± 5% Varaition allowed)

Supplying, and placing in position of Compactors as per layout plan, with knock down construction

mechanical driven mechanism made of 20 GUAGE thick CRCA steel, Under carriage shall have a

welded frame made of HR Sheet. The steel parts shall be pre-treated epoxy powder coated with

approved colour with a dry film thickness of

minimum 40 microns. The compactor shall be divided into 4 compartments with four shelves in each

cabinet, shelves of 18 GUAGE thickness with stiffeners at centre for taking more load of the material. It

should have provision for guide channels which consists of J section minimum 2 mm thick HR sheet &

COMPACTOR 25 mm square bar. It shall have steel inserted round PU handle, label holder of dimensions 155x106 mm

and other fittings nuts & bolts and with all product hardware. The compactor height from ground shall

be minimum 2000 mm. Compactors have a locking knob near the Drive Wheel for manual locking of

individual units when a person is using those units.Complete as per image, and specification under the

guidance of Engineer in charge. (± 5% Varaition allowed).

Supplying, and placing in position of Compactors as per layout plan, with knock down construction

mechanical driven mechanism made of 20 GUAGE thick CRCA steel, Under carriage shall have a

welded frame made of HR Sheet. The steel parts shall be pre-treated epoxy powder coated with

approved colour with a dry film thickness of

minimum 40 microns. The compactor shall be divided into 4 compartments with four shelves in each

COMPACTOR cabinet, shelves of 18 GUAGE thickness with stiffeners at centre for taking more load of the material. It OLD RECORD

915 X 450 X 2000 should have provision for guide channels which consists of J section minimum 2 mm thick HR sheet & ROOM

25 mm square bar. It shall have steel inserted round PU handle, label holder of dimensions 155x106 mm

and other fittings nuts & bolts and with all product hardware. The compactor height from ground shall

be minimum 2000 mm. Compactors have a locking knob near the Drive Wheel for manual locking of

individual units when a person is using those units.Complete as per image, and specification under the

guidance of Engineer in charge. (± 5% Varaition allowed).

Providing and placing wooden storage of size 900 x 450mm and height 2100mm openable storage.

Finishes and Material: The storage unit is made from 18mm prelaminated board. All the exposed edges

are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.Side Storage

WOODEN STORAGE is a combination of open shelves and hinged door unit and is made of 18mm thick pre laminated partical

900 X 450 X 2100 Board. . The back of the unit is made from 18mm prelaminated board. All the exposed edges are with

2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding.

The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. Back The units are

assembled by knock down fittings such as Minifix & Dowels.Warranty 5 years ( ± 5% Varaition

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm. Supplying, and placing in position of sofa

as per Image.A supple Camel Brown premium Leatherette upholstery adds class to the soft cushioned

backrest and seating. The rate of high quality Leatherette used shall be approx Rs. 350/ mt. Sitting

proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material &

subtype:Premium Leatherette, Colour & Colour Family:Brown-Camel Brown, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid DRIVER'S

14 NS-25 SOFA 2 SEATER 3 Nos 16775.78 50,327

wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of LOUNGE

density 35-38 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The unit

should be complete as per image, and specification under the guidance of Engineer in charge. ( ± 5%

Varaition allowed)

Providing and placing in position wooden centre table of size 900mm x 600mm 450mm made up of

CENTER TABLE 900 X teak wood frame work. The top having 12mm thick float glass with decorative edge moulding, the unit DRIVER'S

600 X 450 having ornamental legs including melamine polishing, all complete as per approved sample and as per LOUNGE

direction of Engineer-in- charge. ( ± 5% Varaition allowed)

Providing and placing in position wooden side table of size 450mm x 450mm x 450mm made up of

SIDE TABLE teak wood frame work. The top having 12mm thick float glass with decorative edge moulding, the unit DRIVER'S

450 X 450 X 450 having ornamental legs including melamine polishing, all complete as per approved sample and as per LOUNGE

direction of Engineer-in- charge. ( ± 5% Varaition allowed)

Providing & Supplying Rack of size 900mm L x 310mm D x 1890mm Ht. The top Panel is Made of

CRCA Sheet and side panel is made up of 18mm thick pre laminated particle board of interior grade

with laminate on both sides of approved make and shade. The working and non – working edges shall

BOOK RACK be provided with machine pressed 2mm thick PVC edging using special hot melt glue at high

900 X 310 X 1890 temperature. the back panel is made up of CRCA Metal Sheet Duly Powder Coated. Brackets holding

the shelf are made up of 2mm thick CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder

coated finish as per the directions of Engineer in Charge. The above furniture should be as per

specification and sample approved by client. (± 5% Varaition allowed)

Providing & Supplying Rack of size 900mm L x 610mm D x 1890mm Ht. The top Panel is Made of

CRCA Sheet and side panel is made up of 18mm thick pre laminated particle board of interior grade

with laminate on both sides of approved make and shade. The working and non – working edges shall

BOOK RACK be provided with machine pressed 2mm thick PVC edging using special hot melt glue at high

900 X 610 X 1890 temperature. the back panel is made up of CRCA Metal Sheet Duly Powder Coated. Brackets holding

the shelf are made up of 2mm thick CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder

coated finish as per the directions of Engineer in Charge. The above furniture should be as per

specification and sample approved by client. (± 5% Varaition allowed)

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm. Supplying, and placing in position of sofa

as per Image.A supple Camel Brown premium Leatherette upholstery adds class to the soft cushioned

backrest and seating. The rate of high quality Leatherette used shall be approx Rs. 350/ mt. Sitting

proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material &

subtype:Premium Leatherette, Colour & Colour Family:Brown-Camel Brown, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid

19 NS-30 SOFA 2 SEATER 2 Nos 16775.78 33,552 LIBRARY

wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of

density 35-38 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The unit

should be complete as per image, and specification under the guidance of Engineer in charge. ( ± 5%

Varaition allowed)

Digitally signed by MAYANK

S No Description Qty Unit Rate

Location Image

Providing and placing in position wooden centre table of size 900mm x 600mm 450mm made up of

teak wood frame work. The top having 12mm thick float glass with decorative edge moulding, the unit

20 NS-31 CENTER TABLE 1 Nos 8881.29 8,881 LIBRARY

having ornamental legs including melamine polishing, all complete as per approved sample and as per

direction of Engineer-in- charge. ( ± 5% Varaition allowed)

Providing and placing in position wooden side table of size 450mm x 450mm x 450mm made up of

teak wood frame work. The top having 12mm thick float glass with decorative edge moulding, the unit

21 NS-32 SIDE TABLE 1 Nos 5262.99 5,263 LIBRARY

having ornamental legs including melamine polishing, all complete as per approved sample and as per

direction of Engineer-in- charge. ( ± 5% Varaition allowed)

Office Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be made from 25 mm

thick pre- laminated Particle board . All the edges are sealed with 2 mm thick PVC edge band all around

. Side panels shall be made from 25 mm thick pre- laminated Particle board . All the edges are sealed

with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side

panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm t

22 NS-33 LIBRARIAN TABLE 1 Nos 16446.84 16,447 LIBRARY

pre- laminated Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around.

Freestanding Pedestal shall be made from 18 mm pre- laminated Particle board with a combination of 2

mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are

provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a

single key. (± 5% Varaition allowed)

High back chair with ergonomic design. The seat shall be made of 15mm thick hot pressed commercial

plywood upholstered with high resilience molded polyurethane foam 50mm thick having density

40kg/m³ with fabric tapestry and the back shall be made of two piece injection molded polypropylene

net cover upholstered with breathable mesh tapestry. The base of the seat shall be supplied with PP

cover and the backrest shall be made by keeping the natural curvature of the spine and cushion base

adjustable lumbar support which helps to provide full back support as well as head support. The chair

shall be supplied with black integral 3D adjustable polyurethane arm having sliding, up-down, to & fro

23 NS-34 HIGH BACK CHAIR motion. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with 1 Nos 7105.03 7,105 LIBRARY

upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 120mm with class-3 gas-lift to suit them using the lever under

the seat. The pedestal should have five legged injection molded in 30% glass filled nylon having pitch

circle dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection

molded in black 30% glass filled nylon. The seat length shall be 550±10 mm and depth shall be 550±10

mm. Overall height shall be = 1100±20 mm to 1220±20 mm, with adjustable seat height 500-620mm.

(± 5% Varaition allowed)

Visitor Chair Providing and placing in position of medim mesh back chair. The chair with 2 way

adjustable armrests. Material & Subtype: Mesh, Colour & Colour Family: Black,

Dimension(W)590mm X (D)508mm X (H)990mm, Back Type: Medium Back, Base:. nylon

24 NS-35 VISITOR CHAIR structure with nylon net on back, Base Type: cantilever, SS Pipe 30 MM Dia 16 Guage, Maximum 1 Nos 5591.93 5,592 LIBRARY

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is made up of moulded foam of

density 35-38 kg/m3 with inner & outer cover and upholstered with fire retardant fabric of 250

GSM. (± 5% Varaition allowed)

Office Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be made from 25 mm

thick pre- laminated Particle board . All the edges are sealed with 2 mm thick PVC edge band all around

. Side panels shall be made from 25 mm thick pre- laminated Particle board . All the edges are sealed

OFFICE TABLE - with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side

1600X750X750MM panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm t SEC OFFICER

SIDE RACK - pre- laminated Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. EXE ENGINEER

1200X400X750MM Freestanding Pedestal shall be made from 18 mm pre- laminated Particle board with a combination of 2

mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are

provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a

single key. (± 5% Varaition allowed)

High back chair with ergonomic design. The seat shall be made of 15mm thick hot pressed commercial

plywood upholstered with high resilience molded polyurethane foam 50mm thick having density

40kg/m³ with fabric tapestry and the back shall be made of two piece injection molded polypropylene

net cover upholstered with breathable mesh tapestry. The base of the seat shall be supplied with PP

cover and the backrest shall be made by keeping the natural curvature of the spine and cushion base

adjustable lumbar support which helps to provide full back support as well as head support. The chair

shall be supplied with black integral 3D adjustable polyurethane arm having sliding, up-down, to & fro

26 NS-37 HIGH BACK CHAIR motion. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with 3 Nos 7105.03 21,315

upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 120mm with class-3 gas-lift to suit them using the lever under

the seat. The pedestal should have five legged injection molded in 30% glass filled nylon having pitch

circle dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection

molded in black 30% glass filled nylon. The seat length shall be 550±10 mm and depth shall be 550±10

mm. Overall height shall be = 1100±20 mm to 1220±20 mm, with adjustable seat height 500-620mm.

(± 5% Varaition allowed)

Visitor Chair Providing and placing in position of medim mesh back chair. The chair with 2 way

adjustable armrests. Material & Subtype: Mesh, Colour & Colour Family: Black,

Dimension(W)590mm X (D)508mm X (H)990mm, Back Type: Medium Back, Base:. nylon

27 NS-38 VISITOR CHAIR structure with nylon net on back, Base Type: cantilever, SS Pipe 30 MM Dia 16 Guage, Maximum 3 Nos 5591.93 16,776

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is made up of moulded foam of

density 35-38 kg/m3 with inner & outer cover and upholstered with fire retardant fabric of 250

GSM. (± 5% Varaition allowed)

Workstation 1200mm x 600mm + pedestal : Providing and placing panel & tile based modular

workstation, with partition thickness as 58 mm thk. and height of 1200mm including powder coated

(DFT 60 microns) Aluminium trims. Tiles: Top tiles are fabric tackable and prelam.

Bottom tiles- Plain metal. INTERMEDIATE BLOCKS: Intermediate blocks are given in Laminate

finish. Wire Management- Wires shall be taken into the system through cable ducts from the junction

WORKSTATION boxes and it is carried up to the panels through concealed conduits inside the blocks. Side panels or legs-

28 NS-39 TABLE - out of 25mm thk. prelaminated particle board with flat 2mm thk. PVC lipping edge banding considered 20 Nos 19736.21 3,94,724 CIVIL STAFF

1200X600X750MM only on the open end conditions or metal powder coated legs at the end and shared condition. System

shall also have 120mm high powder coated standalone panel legs to give the system an elevated look.

Worksurface- out of 25mm thk. prelaminated particle board with flat 2mm thk. PVC lipping edge

banding of size 1200mm width x 600mm depth. Free standing pedestal with flat metal front, full height

free standing central locking of size 390mm width x 435mm depth x 646mm height, 3 drawer = 2box +

1file. (± 5% Varaition allowed)

Medium Back Chair Providing and fixing Mesh Chair with Lumber Support, Seat Size 510mm W x

510mm D, Back Size 480m W x 520mm Ht . The chair comes with PP arms , Nylon base with 50mm

29 NS-40 WORKSTATION CHAIR castors . The chair has Push Back Mechanism .The chair comes with Pneumatic Gas Lift of Stroke=95 20 Nos 6249.80 1,24,996 CIVIL STAFF

mm . Seat Height Minimum 480mm from Ground and Maximum 570mm. Overall size of the chair is

620 mm W x 680 mm D x (950 mm- 1050mm) H. (± 5% Varaition allowed)

Providing & fixing in positionConferenceTableas per architectural drawing of size 4000X1500mm in

plan750mm (ht.) in single unit,Top, sides, front to be made out of double layer of 19mm thk. board +

CONFERENCE TABLE - 3.5mm thk. Veneer on exposed surfaces. All other surfaces to be pasted with 3.5mm to 4mm

30 NS-41 1 Nos 427617.84 4,27,618 CONFERENCE

4000X1500X750MM veneer,necessary moulding and lipping of teakwood etc. of approved make , finishing with melamine

polish (matt finish) on all surfaces etc. complete in all respect as per specification and direction of

Engineer-in-charge (Premium category Veneer base rice 300 Rs/ Sqft) (± 5% Varaition allowed)

Digitally signed by MAYANK

S No Description Qty Unit Rate

Location Image

Chair Medium Back- Providing, supplying/ fabricating and placing/ Installation in position Medium

back chair is slim and highly comfortable conferencing seating solution for thinktanks. The seat and

backrest of this revolving chair build in chrome platted oval shape tubular section with intigrated lumber

31 NS-42 CONFERENCE CHAIR 23 Nos 7894.48 1,81,573 CONFERENCE

support maintained in design. The Seat and Backrest is one piece construction upholstered with quality

leatherite stitched on PU foam. The seat and backrest assembly fixed on center tilt mechanism having

two point tilt locking provision. (± 5% Varaition allowed)

Providing & fixing in position Office table in single unit,Top to be made out of double layer of 19mm

thk. board + 3.5mm to 4mm thk. Premium category Veneer on exposed surfaces. All other surfaces to

OFFICE TABLE - be pasted with veneer on inner surface only,Drawers to be made out of 19mm thk. board + 3.5mm thk.

2400X750X750MM Premium category Veneer on exposed and horizontal surfaces. All other surfaces to be pasted with

SIDE RACK - 3.5mm to 4mm veneer,Shutter to be made out of 19mm thk. board +3.5mm thk. Premium category

1200X400X750MM Veneer on exposed surfaces. All other surfaces to be pasted with3.5mm to 4mm veneer,necessary

BACK UNIT - moulding and lipping of teakwood etc. finishing with melamine polish (matt finish) on all surfaces

2400X400X750/ MM etc.,8mm toughened glass on top of table complete in all respect as per specification and direction of

Engineer-in-charge (Premium category Veneer base price 600 Rs/ Sqft).

(± 5% Varaition allowed)

Providing and placing a High back chair with ergonomic design, comfortable &

aesthetically appealing of size 1250mm(height)X 500m X600mm. The seat shall be made of 15mm

thick hot pressed commercial plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm

thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine ASTT. COMM.

33 NS-44 HIGH BACK CHAIR which helps to provide full back support as well as head support. seat & Back. For seating 1 Nos 9868.10 9,868 ACAD

durability the chair shall have torsion Bar 360 degree revolving mechanism and tilt tension

adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 100mm with class-4 gas- lift to suit them using the lever under

the seat. The Pedestal should have five legged made of crome Base having pitch circle dia. 700mm

fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in

black 30% glass filled nylon. (± 5% Varaition allowed)

Providing and placing a medium back chair of size 990mm X 500mm X600mm with

ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick

hot pressed commercial plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm

thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine ASTT. COMM.

34 NS-45 VISITOR CHAIR which helps to provide full back support as well as head support. seat & Back. For seating 3 Nos 9539.17 28,618 ACAD

durability the chair shall have torsion Bar 360 degree revolving mechanism and tilt tension

adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 100mm with class-4 gas- lift to suit them using the lever under

the seat. The Pedestal should have five legged made of crome Base having pitch circle dia. 700mm

fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in

black 30% glass filled nylon. (± 5% Varaition allowed)

Supplying, and placing in 2 seater sofa Dimension (L)1410mm X (D)890mm X (H)870mm.Classic

Contemporary design and slender curves. The Sofa of stands Firm on solid PVC legs with thick

armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which

provides for people to be seated comfortably. Finished in a Brown Nappa Aire Leather (Market rate

upto Rs. 800.00 per meter length + 10% variation) the sofa makes a fantastic first impression. The ASTT. COMM.

35 NS-46 2 SEATER SOFA Cushioning is molded such that it flows along the partition for a clean unified look. steam beech solid 1 Nos 21051.96 21,052 ACAD

wood have used for framing construction of sofa The seat cushion is made of multi layered foam of

density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. (± 5%

Varaition allowed)

Supplying and placing in position of centre table as per photograph Dimension (L)1200mm X

(D)600mm X (H)450mm. The Side table made of solid wood (steam beech) in pu matt polish.The plain

glass placed the top of the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the ASTT. COMM.

36 NS-47 CENTER TABLE table with its support. The wood work below the glass provides the glass with a focal point and some 1 Nos 9539.17 9,539 ACAD

support. Add volumes of style to your living room with the center table. Material & subtype: Solid

Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/ Base:Solid Wood, Finish:Glossy, Style: Contemporary. (± 5% Varaition allowed)

Supplying and placing in position of side table as per photograph Dimension (L)600mm X (D)600mm

X (H)450mm. The Side table made of solid wood (steam beech) in pu matt polish.The plain glass

placed the top of the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the table ASTT. COMM.

37 NS-48 SIDE TABLE with its support. The wood work below the glass provides the glass with a focal point and some 1 Nos 5591.93 5,592 ACAD

support. Add volumes of style to your living room with the side table. Material & subtype: Solid Wood -

Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular Legs/

Base:Solid Wood, Finish:Glossy, Style: Contemporary. (± 5% Varaition allowed)

Providing and placing in position of Main Table Dimension : 2700mm(L) X 1000mm(d) x 750mm(h).

Side Rack Dimension : 1050mm(L) X 400mm(d) x 750mm(h). Providing & fixing in position Office

table in single unit,Top to be made out of double layer of 19mm thk. board + 3.5mm to 4mm thk.

Premium category Veneer on exposed surfaces. All other surfaces to be pasted with veneer on inner

OFFICE TABLE - surface only,Drawers to be made out of 19mm thk. board + 3.5mm thk. Premium category Veneer on

2700X1000X750MM exposed and horizontal surfaces. All other surfaces to be pasted with 3.5mm to 4mm veneer,Shutter to DEPUTY

SIDE RACK - be made out of 19mm thk. board +3.5mm thk. Premium category Veneer on exposed surfaces. All other COMMISSIONER

1050X400MM surfaces to be pasted with3.5mm to 4mm veneer,necessary moulding and lipping of teakwood etc.

finishing with melamine polish (matt finish) on all surfaces etc.,8mm toughened glass on top of table

complete in all respect as per specification and direction of Engineer-in-charge (Premium category

Veneer base price 600 Rs/ Sqft). (± 5% Varaition

Providing and placing a High back chair with ergonomic design, comfortable &

aesthetically appealing of size 1250mm(height)X 500m X600mm. The seat shall be made of 15mm

thick hot pressed commercial plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm

thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine

39 NS-50 HIGH BACK CHAIR which helps to provide full back support as well as head support.completely joint with seat & 1 Nos 9868.10 9,868

Back. For seating durability the chair shall have torsion Bar 360 degree revolving mechanism

and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height

adjustment for healthy seating, user can adjust seat height up to 100mm with class-4 gas- lift to suit

them using the lever under the seat. The Pedestal should have five legged made of crome Base having

pitch circle dia. 700mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon. (± 5% Varaition allowed)

Providing and placing a medium back chair of size 990mm X 500mm X600mm with

ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick

hot pressed commercial plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm

thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine

40 NS-51 VISITOR CHAIR which helps to provide full back support as well as head support. seat & Back. For seating 4 Nos 9539.17 38,157

durability the chair shall have torsion Bar 360 degree revolving mechanism and tilt tension

adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 100mm with class-4 gas- lift to suit them using the lever under

the seat. The Pedestal should have five legged made of crome Base having pitch circle dia. 700mm

fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in

black 30% glass filled nylon. (± 5% Varaition allowed)

Digitally signed by MAYANK

S No Description Qty Unit Rate

Location Image

Providing and placing,Table is completely made up of particle board conforming to IS : 12823 Interior

Grade with PVC edge banding. Top are with 25mm thk boards. Table top is supported on 18mm thick

Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed

TABLE - edges are in 0.8mm thk PVC edge banding. Pedestal unit of size 400mm L x 450mm D x 680mm

1100X750X750MM made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2

Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng

Unit.Table Prelaminated particle Board 18mm thick with Matching PVC lipping.

( ± 5% Varaition allowed)

Providing and placing, Back unit completely made up of particle board conforming to IS : 12823

Interior Grade with PVC edge banding. Top are with 18mm thk boards. Back unit top is supported on

43 NS-54 18mm thick Side panel and 9 mm thkback panel. Back Unit is hinged door unit and is made of 1 Nos 8223.42 8,223 P.A.

Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles are provided in

storages. ( ± 5% Varaition allowed)

Providing and placing,Table is completely made up of particle board conforming to IS : 12823 Interior

Grade with PVC edge banding. Top are with 25mm thk boards. Table top is supported on 18mm thick

Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed

TABLE- edges are in 0.8mm thk PVC edge banding. Pedestal unit of size 400mm L x 450mm D x 680mm

1750X550X750MM made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2

Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng

Unit.Table Prelaminated particle Board 18mm thick with Matching PVC lipping.

( ± 5% Varaition allowed)

Providing and placing, Back unit completely made up of particle board conforming to IS : 12823

Interior Grade with PVC edge banding. Top are with 18mm thk boards. Back unit top is supported on

45 NS-56 18mm thick Side panel and 9 mm thkback panel. Back Unit is hinged door unit and is made of 1 Nos 5591.93 5,592 P.A.

Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles are provided in

storages. ( ± 5% Varaition allowed)

Medium Back Chair Providing and fixing Mesh Chair with Lumber Support, Seat Size 510mm W x

510mm D, Back Size 480m W x 520mm Ht . The chair comes with PP arms , Nylon base with 50mm

46 NS-57 MEDIUM BACK CHAIR castors . The chair has Push Back Mechanism .The chair comes with Pneumatic Gas Lift of Stroke=95 4 Nos 6249.80 24,999 P.A.

mm . Seat Height Minimum 480mm from Ground and Maximum 570mm. Overall size of the chair is

620 mm W x 680 mm D x (950 mm- 1050mm) H. ( ± 5% Varaition allowed)

2 seater Dimension(L)1390mm X (D)750mm X (H)710mm. Supplying, and placing in position of sofa

as per Image.A supple Camel Brown premium Leatherette upholstery adds class to the soft cushioned

backrest and seating. The rate of high quality Leatherette used shall be approx Rs. 350/ mt. Sitting

proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material &

subtype:Premium Leatherette, Colour & Colour Family:Brown-Camel Brown, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid

47 NS-58 2 SEATER SOFA 1 Nos 16775.78 16,776 P.A.

wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of

density 35-38 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The unit

should be complete as per image, and specification under the guidance of Engineer in charge. ( ± 5%

Varaition allowed)

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be made from 25 mm thick pre-

laminated Particle board . All the edges are sealed with 2 mm thick PVC edge band all around . Side

panels shall be made from 25 mm thick pre- laminated Particle board . All the edges are sealed with 2 ASTT

TABLE - mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have COMM. ADMIN

1600X750X750MM 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm t pre- laminated ACOUNTS

SIDE RACK - Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding OFFICER

1200X400X750MM Pedestal shall be made from 18 mm pre- laminated Particle board with a combination of 2 mm and 0.8

mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key.

( ± 5% Varaition allowed)

High back chair with ergonomic design. The seat shall be made of 15mm thick hot pressed commercial

plywood upholstered with high resilience molded polyurethane foam 50mm thick having density

40kg/m³ with fabric tapestry and the back shall be made of two piece injection molded polypropylene

net cover upholstered with breathable mesh tapestry. The base of the seat shall be supplied with PP

cover and the backrest shall be made by keeping the natural curvature of the spine and cushion base

adjustable lumbar support which helps to provide full back support as well as head support. The chair

shall be supplied with black integral 3D adjustable polyurethane arm having sliding, up-down, to & fro

49 NS-60 HIGH BACK CHAIR motion. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with 3 Nos 7105.03 21,315

upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 120mm with class-3 gas-lift to suit them using the lever under

the seat. The pedestal should have five legged injection molded in 30% glass filled nylon having pitch

circle dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection

molded in black 30% glass filled nylon. The seat length shall be 550±10 mm and depth shall be 550±10

mm. Overall height shall be = 1100±20 mm to 1220±20 mm, with adjustable seat height 500-620mm. (

± 5% Varaition allowed)

Visitor Chair Providing and placing in position of medim mesh back chair. The chair with 2 way

adjustable armrests. Material & Subtype: Mesh, Colour & Colour Family: Black,

Dimension(W)590mm X (D)508mm X (H)990mm, Back Type: Medium Back, Base:. nylon

50 NS-61 VISITOR CHAIR structure with nylon net on back, Base Type: cantilever, SS Pipe 30 MM Dia 16 Guage, Maximum 4 Nos 5591.93 22,368

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is made up of moulded foam of

density 35-38 kg/m3 with inner & outer cover and upholstered with fire retardant fabric of 250

GSM. ( ± 5% Varaition allowed)

Workstation 1200mm x 600mm + pedestal : Providing and placing panel & tile based modular

workstation, with partition thickness as 52.4 mm thk. and height of 1200mm including powder coated

(DFT 60 microns) Aluminium trims. Tiles: Top tiles are fabric tackable and prelam.

Bottom tiles- Plain metal. INTERMEDIATE BLOCKS: Intermediate blocks are given in Laminate

finish. Wire Management- Wires shall be taken into the system through cable ducts from the junction

WORKSTATION boxes and it is carried up to the panels through concealed conduits inside the blocks. Side panels or legs-

51 NS-62 TABLE- out of 25mm thk. prelaminated particle board with flat 2mm thk. PVC lipping edge banding considered 24 Nos 19736.21 4,73,669 CIVIL STAFF

1200X600X750MM only on the open end conditions or metal powder coated legs at the end and shared condition. System

shall also have 120mm high powder coated standalone panel legs to give the system an elevated look.

Worksurface- out of 25mm thk. prelaminated particle board with flat 2mm thk. PVC lipping edge

banding of size 1200mm width x 600mm depth. Free standing pedestal with flat metal front, full height

free standing central locking of size 390mm width x 435mm depth x 646mm height, 3 drawer = 2box +

1file. ( ± 5% Varaition allowed)

Digitally signed by MAYANK

S No Description Qty Unit Rate

Location Image

Medium Back Chair Providing and fixing Mesh Chair with Lumber Support, Seat Size 510mm W x

510mm D, Back Size 480m W x 520mm Ht . The chair comes with PP arms , Nylon base with 50mm

52 NS-63 WORKSTATION CHAIR castors . The chair has Push Back Mechanism .The chair comes with Pneumatic Gas Lift of Stroke=95 24 Nos 6249.80 1,49,995 CIVIL STAFF

mm . Seat Height Minimum 480mm from Ground and Maximum 570mm. Overall size of the chair is

620 mm W x 680 mm D x (950 mm- 1050mm) H. ( ± 5% Varaition allowed)

Providing and placing in position of Main Table Dimension : 2400mm(L) X 750mm(d) x 750mm(h).

Side Rack Dimension : 1200mm(L) X 400mm(d) x 750mm(h). Providing &

fixing in position Office table in single unit,Top to be made out of double layer of 19mm thk. board +

OFFICE TABLE - 3.5mm to 4mm thk. Premium category Veneer on exposed surfaces. All other surfaces to be pasted with

2400X750X750MM veneer on inner surface only,Drawers to be made out of 19mm thk. board + 3.5mm thk. Premium

SIDE RACK- category Veneer on exposed and horizontal surfaces. All other surfaces to be pasted with 3.5mm to ASTT. COMM.

1200X400X750MM 4mm veneer,Shutter to be made out of 19mm thk. board +3.5mm thk. Premium category Veneer on ACAD

BACK UNIT - exposed surfaces. All other surfaces to be pasted with3.5mm to 4mm veneer,necessary moulding and

2400X400X750MM lipping of teakwood etc. finishing with melamine polish (matt finish) on all surfaces etc.,8mm

toughened glass on top of table complete in all respect as per specification and direction of Engineer-in-

charge (Premium category Veneer base price 600 Rs/ Sqft).

(± 5% Varaition allowed)

R Providing and placing a High back chair with ergonomic design, comfortable &

aesthetically appealing of size 1250mm(height)X 500m X600mm. The seat shall be made of 15mm

thick hot pressed commercial plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm

thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine

which helps to provide full back support as well as head support.completely joint with seat & ASTT. COMM.

54 NS-65 HIGH BACK CHAIR 4 Nos 9868.10 39,472

Back. For seating durability the chair shall have torsion Bar 360 degree revolving mechanism ACAD

and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height

adjustment for healthy seating, user can adjust seat height up to 100mm with class-4 gas- lift to suit

them using the lever under the seat. The Pedestal should have five legged made of crome Base having

pitch circle dia. 700mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon. (± 5%

Varaition allowed)

Providing and placing a medium back chair of size 990mm X 500mm X600mm with

ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick

hot pressed commercial plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm

thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine

which helps to provide full back support as well as head support. seat & Back. For seating ASTT. COMM.

55 NS-66 VISITOR CHAIR 12 Nos 9539.17 1,14,470

durability the chair shall have torsion Bar 360 degree revolving mechanism and tilt tension ACAD

adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 100mm with class-4 gas- lift to suit them using the lever under

the seat. The Pedestal should have five legged made of crome Base having pitch circle dia. 700mm

fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in

black 30% glass filled nylon. (± 5%

Varaition allowed)

Supplying, and placing in 2 seater sofa Dimension (L)1410mm X (D)890mm X (H)870mm.Classic

Contemporary design and slender curves. The Sofa of stands Firm on solid PVC legs with thick

armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which

provides for people to be seated comfortably. Finished in a Brown Nappa Aire Leathertte (Market rate

upto Rs. 800.00 per meter length + 10% variation) the sofa makes a fantastic first impression. The

56 NS-67 2 SEATER SOFA Cushioning is molded such that it flows along the partition for a clean unified look. steam beech solid 4 Nos 21051.96 84,208

wood have used for framing construction of sofa The seat cushion is made of multi layered foam of

density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. (± 5%

Varaition allowed)

Supplying and placing in position of centre table as per photograph Dimension (L)1200mm X

(D)600mm X (H)450mm. The Side table made of solid wood (steam beech) in pu matt polish.The plain

glass placed the top of the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the

57 NS-68 CENTER TABLE table with its support. The wood work below the glass provides the glass with a focal point and some 4 Nos 9539.17 38,157

support. Add volumes of style to your living room with the center table. Material & subtype: Solid

Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/ Base:Solid Wood, Finish:Glossy, Style: Contemporary. (± 5% Varaition allowed)

Supplying and placing in position of side table as per photograph Dimension (L)600mm X (D)600mm

X (H)450mm. The Side table made of solid wood (steam beech) in pu matt polish.The plain glass

placed the top of the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the table

58 NS-69 SIDE TABLE with its support. The wood work below the glass provides the glass with a focal point and some 4 Nos 5591.93 22,368

support. Add volumes of style to your living room with the side table. Material & subtype: Solid Wood -

Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular Legs/

Base:Solid Wood, Finish:Glossy, Style: Contemporary. (± 5% Varaition allowed)

Providing and placing in position of double bed of Dimension: 1910mm(L) x

2082mm(D) x 1050mm(H). Complete structure ( headboard frame, tail board frame and side frame) GUEST ROOM

made out of 18mm thk Pre-Lam MDF Board and bottom made out of 12mm thk Pre-Lam MDF

Board with Matching PVC lipping. ( ± 5% Varaition allowed).

Providing and placing in position of Bed Side Table of Dimension: 450 (L) x 40mm(D) x

450mm(H). Complete structure (Top Bottom and side frame) made out of 18 mm thk Pre-Lam MDF GUEST ROOM

60 NS-71 BED SIDE TABLE - 6 Nos 2960.43 17,763

Board and Back made out of 9mm thk Pre-Lam MDF Board with Matching PVC lipping. ( ± 5%

Varaition allowed).

Supplying, and placing in 3 seater Dimension (L)1905mm X (D)890mm X (H)870mm.Classic

Contemporary design and slender curves. The Sofa of stands Firm on solid PVC legs with thick

armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which

provides for people to be seated comfortably. Finished in a Brown Nappa Aire Leatherette (Market rate

upto Rs. 800.00 per meter length + 10% variation) , the sofa makes a fantastic first impression. The

61 NS-72 3 SEATER SOFA Cushioning is molded such that it flows along the partition for a clean unified look. steam beech solid 1 Nos 25657.07 25,657

wood have used for framing construction of sofa The seat cushion is made of multi layered foam of

density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used

is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. ( ± 5%

Varaition allowed).

Supplying, and placing in 1 seater Dimension (L)960mm X (D)890mm X (H)870mm.Classic

Contemporary design and slender curves.The Sofa of stands Firm on solid PVC legs with thick armrests

that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides

for people to be seated comfortably. Finished in a Brown Nappa Aire Leatherette (Market rate upto Rs.

800.00 per meter length + 10% variation) , the sofa makes a fantastic first impression. The Cushioning

62 NS-73 SINGLE SEATER SOFA is molded such that it flows along the partition for a clean unified look. steam beech solid wood have 1 Nos 11183.85 11,184 GUEST ROOM

used for framing construction of sofa The seat cushion is made of multi layered foam of density 32-

35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon

bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill

outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. ( ± 5% Varaition

Digitally signed by MAYANK

S No Description Qty Unit Rate

Location Image

Supplying and placing in position of centre table as per photograph Dimension (L)1200mm X

(D)600mm X (H)450mm. The Side table made of solid wood (steam beech) in pu matt polish.The plain

glass placed the top of the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the

63 NS-74 CENTER TABLE table with its support. The wood work below the glass provides the glass with a focal point and some 2 Nos 9539.17 19,078 GUEST ROOM

support. Add volumes of style to your living room with the center table. Material & subtype: Solid

Wood -Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular

Legs/ Base:Solid Wood, Finish:Glossy, Style: Contemporary. (± 5% Varaition allowed)

1. Providing and Placing computer table size shall be 1200 Width mm ±20 mm x 600 Depth mm±10

mm x 750 Height mm ±10 mm. 2. Table top shall be 18 mm PLPB with 35 KGS, shelf shall be 12.5

KGS drawer shall be 506 KGS. The table top shall be 18 mm prelam particle board, 3 mm PLPB board.

3. Metal parts shall be BM Slide For Keyboard Hardware shall be Screw , KD fitting , Wooden Dowel

64 NS-75 COMPUTER TABLE 1 Nos 4934.05 4,934 GUEST ROOM

, PVC ibserts. 4. Construction shall be KD fitting, Wooden dowel & Angle Clit. 5. Provision of side

understorage and CPU storage KBPT in build of wooden material along with the side drawer should be

there. 6. Shall have foot rest and modesty panel made of particle board or wood. (± 5% Varaition

Medium Back Chair Providing and fixing Mesh Chair with Lumber Support, Seat Size 510mm W x

510mm D, Back Size 480m W x 520mm Ht . The chair comes with PP arms , Nylon base with 50mm

65 NS-76 CHAIR castors . The chair has Push Back Mechanism .The chair comes with Pneumatic Gas Lift of Stroke=95 1 Nos 6249.80 6,250 GUEST ROOM

mm . Seat Height Minimum 480mm from Ground and Maximum 570mm. Overall size of the chair is

620 mm W x 680 mm D x (950 mm- 1050mm) H. (± 5% Varaition allowed)

Supplying, and placing in position of full height storage as per photograph/drawing. storage unit having

Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-

WARDROBE - laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm

2100X600X2400 MM thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board.

All edges to be provided with 2 mm thick PVC lipping. Each unit to have openable shutters with

locking provision. (± 5% Varaition allowed)

Supplying, and placing in position of full height storage as per photograph/drawing. storage unit having

Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-

WARDROBE - laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm

800X600X2400MM thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board.

All edges to be provided with 2 mm thick PVC lipping. Each unit to have openable shutters with

locking provision. (± 5% Varaition allowed)

Curtain -Supply of Main curtain fabric for curtains for all heights/locations with required width should

comprise of suitable fabric of approved shade, make and sample. Fabric width to be considered 1.37mt

68 NS-79 Curtain (54") or as per the available opening. Maximum fabric considerd for folding at Top & bottom to be 0.4 200 Rmt 427.62 85,524

Rmt, all complete as per approved design and drawings and direction of Engineer-in-Charge.

(± 5% Varaition allowed)

Black out and Track - Providing and installation of American pleate powder coated aluminium hand

operated Curtain tracks with all required accessories (i.e. tracks, nylon runners, tape, hooks etc.) at all

heights/locations with required width. Curtain will be hung on Ceiling or wall mounted aluminum track

Black out and with matching splices; carriers or slides; cordless hand traverse operations. American pleat (3 pleat)

drapery header styles will create an even look from top to bottom. This header style traverses the track 124 Sqmt 828.92 1,02,786

Track or hardware frictionlessly, creating a floating aesthetic appearence. American Pleat or 3 pleat headers

are hung below the track or hardware on snap and can be hand drawn. All Curtains to be fabricated with

3 pass 100% polyester blackout lining having GSM 270 and considered width to be 54" (inches). The

lining to be sewn to each drapery. (± 5% Varaition allowed)

Shers - Supply of Main curtain fabric for curtains for all heights/locations with required width should

comprise of suitable fabric of approved shade, mak and sample. Fabric width to be considered 1.37mt

70 NS-81 Shers (54"). Maximum fabric considerd for folding at Top & bottom to be 0.4 Rmt, all complete as per

approved design and drawings and direction of Engineer-in- Charge (Basic Rate: Rs. 250 / Rmt) (± 5%

Varaition allowed)

Total 65,06,001

Digitally signed by MAYANK

REGIONAL OFFICE BUILDING FOR NAVODAYA VIDALAYA AT BHOPAL

BILL OF QUANTITY (Electrical)

Rate(inclusive AMOUNT

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY

GST@18%) NSR DSR

1.0 DSR SUB HEAD-I :-WIRING POINTS

(A) Wiring Points in Surface Conduit with PVC insulated 1100 V

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated

multistrand single core copper conductor cable in heavy guage

rigid steel conduit pipe on surface, complete with 14 SWG copper

earth continuity wire, GP Box ,modular type switch and ceiling

rose/angle/ batten holder on 3 mm. thick phenolic laminated

backelite sheet etc. complete in all respect, as directed.

Wiring points for two ways light with 1.5 sq. mm.FRLSH

PVC insulated multistrand single core copper conductor

cable in heavy guage rigid steel conduit pipe on surface,

1.2 1.4 complete with 14 SWG copper earth continuity wire, GP Each 5 2105.80 10529.02

Box , two ways 2 nos. modular type switches & ceiling rose/

angle/ batten holder on 3mm. thick phenolic laminated

backelite sheet etc., complete in all respect, as directed.

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5

sq.mm.FRLSH PVC insulated multistrand single core copper

conductor cable in heavy guage rigid steel conduit pipe on surface

1.3 1.8 complete with 14 SWG copper earth continuity wire, piano type

switch & ceiling rose on

3 mm. thick phenolic laminated backelite sheet etc,

complete in all respect.

Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated

multistrand single core copper conductor cable in

heavy guage rigid steel conduit pipe on surface, complete

with 14 SWG copper earth continuity wire ,GP Box , and

piano type bell push or 2 pin socket etc. complete in all

Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated

multistrand single core copper conductor cable in heavy guage

rigid steel conduit pipe on surface complete with14 SWG copper

earth continuity wire, 15 A piano type switch & ceiling rose on 3

mm.thick phenolic laminated backelite sheet etc, complete in all

(B) Laying of conduit pipes in wall for total concealed light fan,

plug points and for concealed sub mains

Supply and fixing of 6 SWG GI wire on surface or in recessed for

loop earthing as required

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed steel

conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

Supplying and drawing 2 pair 0.5 mm dia FRLS PVC insulated

1.8 1.18 annealed copper conductor, unarmored telephone cable in the 0.00 0.00

existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the existing surface/

recessed steel/ PVC conduit as required.

WIRING SUB HEAD TOTAL 0.00 917974.91

2.0 SUB HEAD-II :-SUB MAINS

Wiring of Submains with copper cable in existing steel conduit

SUB MAINS SUB HEAD TOTAL 0.00 369924.00

3.0 SUB HEAD-III :-EARTHING SYSTEM

Earthing with copper earth plate 600mm x 600mm x 3mm at least

3.1 5.6 2.7 metres below ground level complete charcoal/coke and salt at Set 6 14709.79 88258.76

least 150mm thick alround etc. complete in all respect.

Earthing with GI earth plate 600mm x 600mm x 6mm at least 2.7

3.2 5.4 metres below ground level complete charcoal/coke and salt at Set 10 7942.74 79427.36

least 150mm thick alround etc. complete in all respect.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on

surface for connections etc. as required.

Supply and laying of 25mm x 5 mm G.I. strip from earth electrode

directly in the ground as required complete in all respect.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for

3.6 5.18 loop earthing along with existing surface/ recessed conduit/ Meter 100 44.65 4464.60

submain wiring/ cable as required.

EARTHING AND LIGHTNING CONDUCTOR SUB HEAD TOTAL 0.00 345823.66

4.0 SUB HEAD-IV :-MINIATURE CIRCUIT BREAKER

Digitally signed by MAYANK

BILL OF QUANTITY (Electrical)

Rate(inclusive AMOUNT

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY

GST@18%) NSR DSR

S&F and making connection of 40A 2 pole 30mA ELCB/RCCB of Din

4.1 2.14.2 Rail Mounting complete in all respect as per direction and Each 22 2808.45 61785.81

satisfaction to the Engineer in charge.

4.2 2.10.1 S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve

Single Pole Each 170 272.13 46261.76

4.3 2.13.1 S&F of 40 Amp. 4 pole Isolator (10 KA) C Curve 0.00 0.00

S & F surface/Flush mounting 8 ways SPN distribution board with

4.4 2.3 additional metal door without MCB complete in all respect, as

Direct by Engineer in Charge.

2.3.2 8 Way double door Each 4 2735.10 10940.40

S & F surface/Flush mounting 8ways TPN distribution board with

4.5 2.4 additional metal door without MCB complete in all respect, as

directed at site by Engineer in charge.

supplying and fiing folloing rating,double pole,240v,isolator in the

2.12 exiting MCB DB complete with connectoin testing and

commissioning etc.as required.

supplying and fiing folloing rating,double pole,240v,residual

current circuit breaker (RCCB),having a enitivity currrent 30ma in

the eiting MCB DB completed with connection ,teting

commisoining etc.as required.

MINIATURE CIRCUIT BREAKER SUB HEAD TOTAL 0.00 164949.96

5.0 SUB HEAD-V :-MISCELLANEOUS ITEMS

Supply, Installation, Testing and Commissioning of 1200 mm

sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current

(BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down

5.1 19.1 rod, 2nos. canopies, shackle kit, safety rope, copper winding, Each 15 2901.99 43529.85

Power Factornot less than 0.9, Service Value (CM/M/W) minimum

6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as

per IS : 374-2019),THD less than 10%, remote or electronic

Supply and fixing of shock treatment chart (prescribed under I.E.

rules)(50 x 70 cm)

Supply and laying of 2000mm x 1000mm x 3mm thick chequered

rubber matting of tested quality.

Supply and fixing of power plug with 15A/16A, 250 volt flush type

Supply and fixing of power plug with 6A, 250 volt flush type switch

Supply and fixing of LED TV Screen ultra HD smart with latest

technology in market (55 inch ) of samsung make or equivalent

MISCELLANEOUS ITEMS SUB HEAD TOTAL 87612.32 82324.04

6.0 SUB HEAD-VI :-LUMINAIRES WORK

Supply of following sizes of heavy duty exhaust fan for single

6.1 NS-85 phase 230 volt, 50HZ AC supply complete with motor, blades,

frame, bracket, louver/ shutter etc as required.

a 250 mm Exhaust Fan (1200 RPM) Nos 8 1865.88 14927.00

Supply, Installation, Testing & Commissioning of recessed type

down lighter complete with lamps & accessories 18 W LED

Supply, Installation, Testing & Commissioning of surface mounted

type down lighter complete with lamps & accessories 18W LED

Supply, Installation, Testing & Commissioning of recess type 2x2,

24 watt LED Light Fixtures complete with lamps & accessories.

Supply, installation, testing & commisioning of Recess Linear

Connected/Standalone luminaire. Well designed extruded

aluminium housing linear profile with flushed diuser for perfect

optic controls 20W LED

LUMINAIRES SUB HEAD TOTAL 861980.38 0.00

7.0 SUB HEAD-VII :-CABLE TRAY WORKS

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray (Galvanisation thickness not less than

7.1 4.6 50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

b 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 30 761.11 22833.24

c 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 10 1023.67 10236.69

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "bends" (galvanisation not less than 50

7.2 4.7 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

b 4.7.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 8 1350.01 10800.08

c 4.7.4 300 mm width X 50 mm depth X 1.6 mm thickness Meter 8 1968.68 15749.41

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Tee" (galvanisation not less than 50

7.30 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

b 4.8.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 8 1470.13 11761.03

Digitally signed by MAYANK

BILL OF QUANTITY (Electrical)

Rate(inclusive AMOUNT

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY

GST@18%) NSR DSR

c 4.8.4 300 mm width X 50 mm depth X 1.6 mm thickness Meter 8 2291.83 18334.62

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Cross member"(galvanisation not less

than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the

ceiling with G.I. suspenders including G.I. bolts & nuts, etc as

b 4.9.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 4 1470.13 5880.52

c 4.9.4 300 mm width X 50 mm depth X 1.6 mm thickness Meter 4 2515.06 10060.23

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Reducer" (galvanisation not less than

7.5 4.10 50 microns) with perforation not more than17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc as required.

b 4.10.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 2 2042.02 4084.05

c 4.10.4 300 mm width X 50 mm depth X 1.6 mm thickness Meter 2 3000.85 6001.70

Supply & fixing of following size (GP RACEWAY- Fabricated

from GP Sheet) race ways for electrical & LV wiring including

neoprene gasket in joints, cutting the floor & jaming the race

7.6 way / hanging in ceiling, supporting arrangement as approved

by consultant / architect with all necssary hard ware (including

civil work) as per site requirement. The thickness of raceway &

cover shall be as per technical specification.

Supply & fixing of following size of Raceway Junction Box made out

of GP Sheet for electrical & LV wiring including, cutting the floor &

jaming the junction box / hanging in ceiling, supporting

arrangement as approved by consultant / architect with all

necssary hard ware (including civil work).(Junction box to be

provided as per drawing/ as per site requirement & as per

specification). The thickness of junction box shall be a as per

thechnical specification.

a NS-93 150 mm wide x 50 mm deep. Set 10 345.38 3453.84

b NS-94 200 mm wide x 50 mm deep. Set 8 547.82 4382.53

b NS-95 300 mm wide x 50 mm deep. Set 8 829.88 6639.04

CABLE TRAY WORK SUB HEAD TOTAL 104308.05 115741.57

8.0 SUB HEAD-VIII :- UPS

Supply, installation, testing & commissioing of 15 KVA UPS at 0.99

input power factor with SNMP card, compatible for BMS

a. NS-96 connectivity on backnet/MODBUS, inbuilt / external isolation

transformer as per specification given in the document with

following broad features.

THD(i) shall be less than 3% in the entire loading range.

Input power factor shall be more than 0.95. from 25% to 100%

UPS shall carry design output at 40 deg.

Shall have soft start and hold of for incoming supply.

Invertor capability to supply 150% load for 5 sec.

Three Phase Input and Three Phase Output. ( Input - 340V - 470V,

Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.)

Shall not allow deep discharge of the battery and shall not go to

10.5 volts in case of 12 volt cells.

Battery shall be external type with rack and suitable for 30 minute

backup on 100% load.

UPS described as above Set 1 369128.77 369128.77

UPS SUB HEAD TOTAL 369128.77 0.00

9.0 SUB HEAD-XI :-DISTRIBUTION CABLE WORKS

Supply and drawing of following size of FRLS PVC insulated copper

9.1 1.17 conductor, single core cable in the existing surface / recessed steel

/ PVC conduit as required-

NS-cable-01 95 sq. mm 3-1/2 core RM 50 34099.44

NS-cable-02 120 sq. mm 3-1/2 core RM 70 59797.42

NS-cable-03 300 sq. mm 3-1/2 core RM 10 19804.87

Supply and making end termination with brass compression gland

9.2 9.1 and aluminium lugs for following size of PVC Insulated & PVC

sheath /XLPE Al conductor cable of 1.1 kv grade as required-

Supplying and fixing cable route marker with 10 cm X 10 cm X 5

mm thick G.I. plate with inscription there on, bolted /welded to 35

mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in

ground as required.

Digitally signed by MAYANK

BILL OF QUANTITY (Electrical)

Rate(inclusive AMOUNT

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY

GST@18%) NSR DSR

Laying of one number PVC/XLPE insulated and PVC sheathed

10.1 8.3 power cable of 11 KV grade of following

sizes in the existing RCC/Hume / Metal pipe as required.

i) 8.3.2 Above 120 Sqmm. and upto 400 sqmm Metre 60 142.44 8546.52

supplying and making indoor cable end termination with heat

shrinkable jointing kit complete with all accessories including

lugs suitable for following size of 3 core, XLPE aluminium

conductor cable of 11 kV grade as required.

Supply of following sizes of 11KV XLPE grade multicore

stranded aluminium conductor (Earthed), XLPE insulated & PVC

10.3 NS-97 Quotation taken from online

sheathed armoured cable conforming to IS: 7098 (Part-I)

1988 complete as required and as per specification encolsed.

CABLE WORK SUB HEAD TOTAL 234525.57 447625.05

11 NS-98 11 KV SUB-STATION

11.1 11KV, H.T. METERING PANEL- (INDOOR TYPE)

Supply, erection, testing and commissioning of Metring cubicle

with 11 KV PTs 11kV/110V, 11 KV CTs 150/5 5A with trivector

meter indoor type as per local Electricity board, getting approval

and calibration as required by the Department. complete etc.

11.2 NS-99 11 KV COMPACT SUB STATION

Supply, installation, testing and commissioning of 11 / 0.433 KV

compact package sub station comprising 2 No. 11 KV 630 A Load

break switch breaker as incomer & 1 No. 200 Amps electrically

operated trip free type SF6 breaker at 47 deg. C ambient as outgoing

with metering & protection for 200 KVA 11 / 0.433 KV Oil filled

transformer & LT section consisting of 2 no.400 Amp 4 P MCCB

with 400 amp contactor as incomings of minimum 36 KA breaking

capacity and 1 No. 250 amps TPN MCCB & 5 No. 40 amps 4 P

MCB as outgoing and arrangement for 65 kVAR capacitor bank

including APFC Relay . All MCCB above 250 amp shall have

Microprocessor based release unit. Package sub-station shall be

complete as per specification. Both the incomers of LT sections shall

be electrical & mechanical interlocked & all outgoing feeders of LT

sections will have dual source energy meter.

11 KV HT SYSTEM SUB HEAD TOTAL 3283994.00

12.0 L.T. SWITCH PANEL BOARDS

12.1 NS-100 MAIN DISTRIBUTION BOARD ( MDB-01)

Supply, installation, testing & commissioning of cubical type LT

panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system

having front surface area as per G.A Drawing, fabricated in

compartmentalized (preferably) design from CRCA sheet steel of 2

mm thick for frame work and covers, 3 mm thick for gland, plates

i/c cleaning & finishing complete with 9 tank process for powder

coating in approved shade, having 400 Amp capacity extensible

type 4P Aluminium alloy bus bars of high conductivity, DMC / SMC

bus bar supports, with short circuit withstand capacity of 31 MVA

for 1 Sec., bottom base channel of MS section not less than 100

mm X 50 mm x 5 mm thick, fabrication shall be done in

transportable sections entire panel shall have a common copper

earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud,

solid connections from main bus bar to switch gears with required

size of Al. bus bars and control wiring with sq. mm. PVC insulated

copper conductor S/C cable, cable alleys, cable gland plates in two

half, i/c providing following switch gears :-

1 No. 250Amp Four Pole Moulded Case Circuit Breaker of 35 KA

250/5A class 1, 5VA CTS 1NO Digital multifunction meter

1 Set of phase indicating lamps with single pole MCB.

1 Set of Breaker 'ON' & 'OFF' / TRIP indicating lamps.

300 Amp 4P Aluminium busbar with coloured heat shrinkable

Providing and fixting of 1 Nos. 160 Amp 4P MCCB of 25KA (Ics

value) with T/M OL&SC Protection.

ii) Providing and fixting of 8 Nos. 40 Amp 4P MCB of 10KA (Ics value)

Panel described as above Set 1 127814.40 127814.40 Dicount @10%

12.2 NS-101 HVAC panel

Digitally signed by MAYANK

BILL OF QUANTITY (Electrical)

Rate(inclusive AMOUNT

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY

GST@18%) NSR DSR

Supply, installation, testing & commissioning of cubical type LT

panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system

having front surface area as per G.A Drawing, fabricated in

compartmentalized (preferably) design from CRCA sheet steel of 2

mm thick for frame work and covers, 3 mm thick for gland, plates

i/c cleaning & finishing complete with 9 tank process for powder

coating in approved shade, having 400 Amp capacity extensible

type 4P Aluminium alloy bus bars of high conductivity, DMC / SMC

bus bar supports, with short circuit withstand capacity of 31 MVA

for 1 Sec., bottom base channel of MS section not less than 100

mm X 50 mm x 5 mm thick, fabrication shall be done in

transportable sections entire panel shall have a common copper

earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud,

solid connections from main bus bar to switch gears with required

size of Al. bus bars and control wiring with sq. mm. PVC insulated

copper conductor S/C cable, cable alleys, cable gland plates in two

half, i/c providing following switch gears :-

1 No. 160Amp Four Pole Moulded Case Circuit Breaker of 25 KA

160/5A class 1, 5VA CTS 1NO Digital multifunction meter

1 Set of phase indicating lamps with single pole MCB.

1 Set of Breaker 'ON' & 'OFF' / TRIP indicating lamps.

200 Amp 4P Aluminium busbar with coloured heat shrinkable

i) Providing and fixting of 6 Nos. 63 Amp 4P MCB of 10KA (Ics value)

Panel described as above Set 1 82690.02 82690.02 Dicount @10%

12.3 NS-102 UPS PANEL (SDB-01)

Supply, installation, testing & commissioning of cubical type LT

panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system

having front surface area as per G.A Drawing, fabricated in

compartmentalized (preferably) design from CRCA sheet steel of 2

mm thick for frame work and covers, 3 mm thick for gland, plates

i/c cleaning & finishing complete with 9 tank process for powder

coating in approved shade, having 400 Amp capacity extensible

type 4P Aluminium alloy bus bars of high conductivity, DMC / SMC

bus bar supports, with short circuit withstand capacity of 31 MVA

for 1 Sec., bottom base channel of MS section not less than 100

mm X 50 mm x 5 mm thick, fabrication shall be done in

transportable sections entire panel shall have a common copper

earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud,

solid connections from main bus bar to switch gears with required

size of Al. bus bars and control wiring with sq. mm. PVC insulated

copper conductor S/C cable, cable alleys, cable gland plates in two

half, i/c providing following switch gears :-

1 No. 40Amp Four Pole MCCB of 25 KA (Ics Value) with Thermal

Magnetic release for O/L & S/C Protection.

1NO Multi function meter.

1 Set of phase indicating lamps with single pole MCB.

1 Set of Breaker 'ON' & 'OFF/TRIP indicating lamps.

50 Amp 4P Aluminium busbar with coloured heat shrinkable

Providing and fixting of 6 Nos.32 Amp DP MCB of 10KA (Ics value)

with Protection.

Panel described as above Set 1 45331.60 45331.60

12.4 NS-103 LIFT PANEL

Supply, installation, testing & commissioning of cubical type LT

panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system

having front surface area as per G.A Drawing, fabricated in

compartmentalized (preferably) design from CRCA sheet steel of 2

mm thick for frame work and covers, 3 mm thick for gland, plates

i/c cleaning & finishing complete with 9 tank process for powder

coating in approved shade, having 125Amp capacity extensible

type 4P Aluminium alloy bus bars of high conductivity, DMC / SMC

bus bar supports, with short circuit withstand capacity of 31 MVA

for 1 Sec., bottom base channel of MS section not less than 100

mm X 50 mm x 5 mm thick, fabrication shall be done in

transportable sections entire panel shall have a common copper

earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud,

solid connections from main bus bar to switch gears with required

size of Al. bus bars and control wiring with sq. mm. PVC insulated

copper conductor S/C cable, cable alleys, cable gland plates in two

half, i/c providing following switch gears :-

1 No. 40 Amp 4P MCB with following accessories-

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

50 Amp 4P Aluminium busbar with coloured heat shrinkable

Digitally signed by MAYANK

BILL OF QUANTITY (Electrical)

Rate(inclusive AMOUNT

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY

GST@18%) NSR DSR

i) 4 Nos. 25 Amp 4P Miniature Circuit Breaker.

iii) 1 Nos. 25 Amp DP Miniature Circuit Breaker.

Panel described as above Set 1 25903.77 25903.77

L.T. SWITCH PANEL BOARDS TOTAL 281739.80

13.0 NS-104 SUB HEAD-XVIII :-EXTERNAL LIGHTING WORK

Supplying,installation,testing and commissioning of 7.5 meter

Height hot dip galvanised continously tapered (bolt fixing type)

octagonal Pole including 90 watt LED Fixture, colour cool white ,

integral driver, protection IP 65, CLASS I with top 70 mm dia and

bottom 130 mm dia made of 3 mm thick H T sheet Steel

conforming to grade S 355 complete with G I base plate of size

220 mm (L) X 220 mm (B) X 16 mm thickness welded at bottom

of pole complete with 4 Nos 20 mm dia 750 mm long foundation

bolts confroming to EN 8 grade, inbuilt / Vandal resistance,

weathproof electrical junction box having terminal block, MCB

etc mounted on bakelite sheet for looping in /looping out of

cables, with flush door having locking arrangement, earthing

arrangement (at atleast 0.5 m height) and mounted on RCC

foundation of size 450 mm x 450 mm x 1000 mm in ground and

200 mm above ground level with foundation bolt duly embeded

before casting and supply and embedding of suitable size HDPE

pipe sleeve for cable entry. complete including erection of Pole

complete in all respect as required.

LIGHTING FIXTURE

Supply, Installation, testing and commissioning of 1000mm

long Double arm bracket of approved design and shape

13.2 NS-105 made up of MS metal with hot dip galvanised suitable for Each 4 4345.52 17382.07

pole top of 70mm dia complete with fixing arrangement as

Supply, Installation, testing and commissioning of 1000mm

long Single arm bracket of approved design and shape

13.3 NS-106 made up of MS metal with hot dip galvanised suitable for Each 6 1969.06 11814.38

pole top of 70mm dia complete with fixing arrangement as

Supply of LED flood light fixture suitable for Surface / Wall type

mounting with Epoxy powder coated die -cast aluminium housing

13.4 NS-107 with heat Sink, toughened glass, complete with inbuilt electronics Each 10 8826.83 88268.34

driver, mounting bracket, 90 Lumen /watt efficacy, min 7000

Lumen output, THD<10%, P.F. >0.95, IP 65 rated as required

Supply, Installation Testing & Commissioning of Flexible LED

Strip Light (IP-65) with double tape on backside suitable for

Mounting in cove with all accessories including connections etc as

required. Wattage 14.4 Watt / Meter.

Supply, Installation Testing & Commissioning of 78 Watt (IP-

65) external LED driver in suitable weather proof enclosure for

flexible LED Strip light complete including connection etc as

EXTERNAL LIGHTING WORK SUB HEAD TOTAL 319915.11

14.0 SUB HEAD-XIX :-DIESEL GENERATOR SET

14.1 NS-110 DG SET (200 KVA)

Providing, Installing, Testing and Commissioning of 'Standard

Type' Diesel Generating set alongwith having Prime Power

Rating of 200 KVA (BD-IV), 415 volts at 1500 RPM, 0.8 lagging Set. 1 2874039.44 2874039.44

power factor at 415V suitable for 50 Hz, 3 phase system and

consisting of the followings: (Total of a to h).

a) Diesel Engine:

Diesel engine 4 stroke water cooled, Radiator type electric start, of

suitable BHP at 1500 RPM suitable for above output of alternator

at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to

BS 5514, BS 649, IS 10000, capable of taking 10% over

loading for one hour after 12 hours of continuous operation.

The engine will be fitted complete with all required accessories.

Digitally signed by MAYANK

BILL OF QUANTITY (Electrical)

Rate(inclusive AMOUNT

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY

GST@18%) NSR DSR

Engine mounted Instrument Panel fitted with and having

digital display for following:

i) Start-stop switch with key.

ii) Water temperature indication.

iii) Lubrication oil pressure indication.

iv) Lubrication oil temperature indication.

v) Battery charging indication.

vi) RPM indication.

vii) Over speed indication.

viii) Low lub. Oil trip indication.

ix) Engine Hours indication.

c) Alternator:

Synchronous alternator rated at 200 KVA, 415 volts at 1500 RPM, 3

phase 50 Hz, AC Supply with 0.8 lagging power factor at 40 Degree

C, 50% RH & AT 1000 Meter MSL. The alternator shall be having

SPDP enclosure, brushless, continuous duty, self-excited and self -

regulated through AVR conforming to IS: 4722/BS 2613 Suitable

for tropical conditions and with class - H insulation.

d) Base Frame & Foundation:

Both the engine and alternator shall be mounted on suitable

base frame made of MS channel with necessary reinforcement

which shall be installed on suitable cement concrete foundation

and vibration isolation arrangement as per recommendations of

Daily service fuel tank of 990 litres capacity fabricated out of 3 mm

thick M.S. Sheet complete with all standard accessories and fuel

i) piping between fuel tank and diesel engine with MS class 'C'

pipes of suitable dia. Complete with valves, level indications &

accessories as required as per specifications.

f) Exhaust System:

Dry exhaust mainfold with hospital exhaust silencer.

g) Starting System:

24V DC starting system comprising of starter motors: voltage

regulator and arrangement for initial excitation complete with 2

nos. of batteries (180 Amp. Hour capacity lead acid type) as

required as per specifications.

Accoustic and weather proof enclosure with arrangement for fresh

h) air intake for cooling of the engine & alternator, extraction,

discharging hot air in to the atmosphere as per specifications.

14.2 NS-111 EXHAUST PIPING

i) 125 mm dia MS pipe (6mm thick) Metre 10 6570.92 65709.24

DIESEL GENERATOR SUB HEAD TOTAL TOTAL 2939748.68

Digitally signed by MAYANK

BILL OF QUANTITY (LV)

Sl.No. REF.NO. DESCRIPTION OF ITEM Unit QTY AMOUNT

SECTION - I- STRUCTURED CABLING SYSTEM PASSIVE

Supply, installation, testing & commissioning of armoured 6 core Singlemode OS2

(9/125 Micro), Corrugated ECCS Armor, HDPE (UV) Sheathing, Theoxtropic gel filled

1 NS -112 OFC cable with 2 Nos steel music wire embedded in side sheathing as stregth Mtr 300 98.68 29,604.31

member for switch connectivity. Cable should be ROHS compliant and as per

IEC60749-1 with product warranty of 30 years.

Supply, installation, testing & commissioning of 6F SM loaded LIU with LC adaptor

plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable entry exist point with

rubber gurment along with the LIU, Powder Coaded 1.2mm steel sheet metal, 1U etc

2 NS -113 complete as required. LIU should be in accordance with YD/T 778-2006 Optical Nos. 2 11,512.79 23,025.58

Distribution Frame & YD/T 1272.1-2003 Optical Fiber Connector Part 1: Type LC and

should have 30 years of product warranty.

Supply, installation, testing & commissioning of 24F SM loaded LIU with LC adaptor

plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable entry exist point with

rubber gurment along with the LIU, Powder Coaded 1.2mm steel sheet metal, 1U etc

3 NS -114 complete as required. LIU should be in accordance with YD/T 778-2006 Optical Nos. 1 14,802.16 14,802.16

Distribution Frame & YD/T 1272.1-2003 Optical Fiber Connector Part 1: Type LC and

should have 30 years of product warranty.

Supply, installation, testing & commissioning of LC-LC singlemode OS2 (9/125)

duplex, LSZH fiber patch cord for LIU to switch connectivity. Patch Cord should have

aramid yarn as strenght member with 1000 time mating cycle.

Supply, installation, testing & commissioning of CAT 6A UTP LSZH Cable, 23 AWG

solid copper conductors in accordance to TIA/EIA 568 C.2 (Category 6a) & ISO/IEC

11801 2nd ed(Class Ea), UL Approved, tested @500 Mhz, with HDPE insulation of

individual conductor and over all Dia of 7.2 mm for Connectivity of Hub room to End

Point. Grey Color

Supply, installation, testing & commissioning of CAT 6A UTP Universal (both tool &

toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4

2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have

minimum 750 mating cycle and 200 insertion cycle and UL approved,for Data, Voice,

& Wi-Fi at user end.

Supply, installation, testing & commissioning of loaded 24 port CAT 6A UTP,

Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar,

7 NS -118 clear label marks and earthing plug for CAT6A cable termination at rack end. Nos. 7 10,964.56 76,751.92

Supply, installation, testing & commissioning of CAT 6A UTP, LSZH Patch Cord as per

ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side

switch to jack panel connectivity.

Supply, installation, testing & commissioning of CAT 6A UTP, LSZH Patch Cord as per

ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side

switch to end user connectivity.

Supply, installation, testing & commissioning of 1, 2 and 4 port face plate, British

Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-

V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC

11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 white for I/O fixing

Supply, installation, testing & commissioning of 36 U (600W/1000D) floor mount

rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.

12 SECTION - II- IP-PBX SYSTEM

Supply, installation, testing & commissioning of Pure IP at core server Based voice

solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch)

Circuit with CLIP Facility ,50 IP users License ,01 Nos. IP Operator Console, 100 Party

Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call

Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant

server in active-Active mode.

Supply, installation, testing & commissioning of Type 1 IP Phone 1 VoIP account , Full

14 NS -124 duplex speaker phone, IPV6, 2xLAN, PoE . Nos. 20 7,565.55 1,51,310.93

15 SECTION - III- LOCAL AREA NETWORK ( LAN )

Digitally signed by MAYANK

Supply, Installation, Testing & Commissioning of 24 Port POE+ Access Switches with

switching capaticy of 128 Gbps, forwarding performance 95 Mpps, minimum PoE

budget of 350W, with 2x 10G SFP+ uplink ports. Should support for Stacking/VC with

stacking bandwidth of maximum 40 Gbps as and when required. Should support min

2GB internal DRAM, 2GB internal Flash memory, 16K MAC address. Should have

16 NS -125 Static Routing , Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Nos. 2 1,53,777.95 3,07,555.91

Time Protocol (NTP), Domain Name System (DNS) and IPv6 features from day 1 and

should support OSPF, VRRP, OSPFv3 and PIM with 1 year support.

Supply, installation, testing & commissioning of fiber Modules 10G BASE

Supply, installation, testing & commissioning of Appliance based customised ITAM

for asset inventory management with ability to map physical locations and exact rack

elevations for audit and support control. Appliance shall be Intel x86 based device

with secure intranet server with Linux Based operating system and relational

databases for long term storage. Appliance includes license for 100 units under

SITC of WirelessIndoor Access Point support Data rate support 1.8 Gbps , 2.5 Ghz -

2x2 : 2 802.11b/g/n/ac up to 400 Mbps data rate; 2x2 : 2 802.11ax up to 575 Mbps, 5

Ghz - 2x2 : 2 802.11ax up to 1,200 Mbps, Transmit Beamforming and Maximal Ratio

Combining the WLAN Access Point solution should have integrated dynamic packet

capture, WIPS, detection of rougue and honeypot Access Point detection, able to

create WxLAN policies . AP indoor 2x2 with 802.11 a/b/g/n/ac support. The solution

should be artificial intelligence based self healing solution. should also support Asset

Tracking if required in future without any change in Hardware. Should support upto

16 SSIDs per AP. Must be able to limit per SSID or per user based uplink or downlink

20 NS -129 SUB-HEAD -IV- IP CCTV SYSTEM

Supply, installation, testing and commissioning of 5 MP Dome camera ,ONVIF profile

S,G & T. UL , CE , FCC,BIS Certified ,OEM defined MAC address.1/2.7” Progressive

Scan CMOS ,3.6 mm fixed lens , Quad stream Each stram support H.265 compression

simultaneously ,min illumination : Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR

ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s , WDR , Compression :

H.265/H.265+/H.264/H.264+ .SD card support upto 256GB , frame rate : Main

stream should support 25/30 fps@5MP, Built in Mic, Edge analytics : Customer Flow

staistics, Heat Map, Human & Vehicle Detection, Pedestrian Intrusion Detection &

Line cross Detection. Queue length detection Regional population statistics, SOD-

Stationaary Object Detection, Motion Detection, Tempring Detection, Rare Sound

Detection, License Plate Detection. Defog. Protocols:- TCP/IP, HTTP, DHCP, DNS,

DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, P2P, UDP,PPPoE, Bonjour. In

built IR LED , IR Distance upto 30 meters , IP 66 , POE.

Supply, installation, testing and commissioning of 5 MP Bullet camera ,ONVIF profile

S,G & T. UL , CE , FCC,BIS Certified,OEM defined MAC address,1/2.7” Progressive

Scan CMOS ,3.6 mm fixed lens , Quad stream Each stram support H.265 compression

simultaneously ,min illumination : Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR

ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s , WDR , Compression :

H.265/H.265+/H.264/H.264+ .SD card support upto 256GB , frame rate : Main

stream should support 25/30 fps@5MP, Built in Mic, Edge analytics : Customer Flow

22 NS -131 staistics, Heat Map, Human & Vehicle Detection, Pedestrian Intrusion Detection & Nos. 3 16,309.78 48,929.35

Line cross Detection. Queue length detection Regional population statistics, SOD-

Stationaary Object Detection, Motion Detection, Tempring Detection, Rare Sound

Detection, License Plate Detection. Defog. Protocols:- TCP/IP, HTTP, DHCP, DNS,

DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, P2P, UDP,PPPoE, Bonjour. In

built IR LED , IR Distance upto 30 meters , IP 66 , POE.

Supply, installation, testing and commissioning of 32 channel NVR , ONVIF compliant

, Certification CE,FCC,UL,BIS,OEM defined MAC address. recording bandwidth 320

Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out ,

1 X RJ-45 port (1000M) , Bit Rate 16kbps-20mbps per channel, Sync Playback

4/8/10/16 ch playback, iOS smartphone support , 8 HDD support , each HDD slot

support upto 8 TB HDD , , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse, 1 E-

Sata Port, Cloud Storage, Net HDD, Edge analytics : Customer Flow staistics, Face

23 NS -132 Attendence, Face Detection and Recognition, Heat Map, Human & Vehicle Detection, Nos. 1 1,15,127.88 1,15,127.88

Pedestrian Intrusion Detection & Line cross Detection, Queue length detection,

Regional population statistics, SOD-Stationaary Object Detection, Deterrence, PIR,

Video tampering, AI Registerd Qty- 10000 & AI Captured Qty- 200000. Protocol

support:- HTTp, TCP/IP, IPv4, UPNP, RTSP,UDP,SMTP,NTP,DHCP,DNS,IP

filter,PPPOE,DDNS,FTP,IP search, P2P, NFS/SMB/CIFS, ONVIF.

Supply, installation, testing & commissioning of 8TB Surviellance Hard Disk.

Supply, installation, testing & commissioning of Full HD 55" LED Professional Display

Supply, installation, testing & commissioning of Workstation PC: Intel(R) Core(TM) i7-

3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3

1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X

Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card:

Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB,

7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64

Digitally signed by MAYANK

27 Total Amount 30,96,934.78

27 Total Amount 30,96,934.78

28 SUB-HEAD -V- FIRE DETECTION SYSTEM

Supplying, installation, testing & commissioning of intelligent analog addressable

29 17.2.4 photothermal detector complete with mounting base complete as required (Below Nos. 48 3038.05 1,45,826.59

Supplying, installation, testing & commissioning of intelligent analog addressable

30 17.2.4 photothermal detector complete with mounting base complete as required (Above Nos. 42 3038.05 1,27,598.27

Supplying, installation, testing & commissioning of response indicator on

31 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with Nos. 46 293.39 13,495.85

all connections etc as required.

32 MANUAL CALL POINT

Supplying, installation, testing & commissioning of addressable manual

call point complete as required.

34 CONTROL MODULES

Supplying, installation, testing & commissioning of addressable fire control

module complete as required.

Supplying, installation, testing & commissioning of addressable beam

detector with short circuit isolator (inbuilt or separate) complete with

emitter and receiver including connections with remote test features etc

complete as required.

37 Hooter cum strobe

Supplying, installation, testing & commissioning of addressable horn cum

strobe complete as required

39 FIRE ALARM CONTROL PANEL

Supplying, installation, testing and commissioning of micro processor

based intelligent addressable main fire alarm panel, central processing

unit with the following loop modules and capable of supporting not less

than 240 devices (including detectors) and minimum 120 detectors per

loop and loop length up to 2 km, network communication card, minimum

320 character graphics/ LCD display with touch screen or other keypad

and minimum 4000 events history log in the non volatile memory

(EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24

volt sealed maintenance free batteries with automatic charger. The panel

shall have facility to connect printer to printout log and facility to have

seamless integration with analog/digital voice evacuation system (which is

part of the schedule of work under SH: PA System) and shall be complete

with all accessories . The panel shall be compatible for IBMS system with

open protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of fire fighter phone jack

complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone

handset complete as required.

Supplying & laying of 2x1 .5 sqmm fire alarm armoured cable, 600/1 000V

44 17.5.2 rated with annealed copper conductor having XLPE insulation, steel wire RM 1100 183.90 2,02,288.90

armouring & FRLS outer sheath complete as required.

Supply, installation, testing & commissioning of 6W Ceiling Speaker with max

46 SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160

deg. The speaker should have tappings at 6W/3W/1.5W

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling

speaker complete as required

48 PA CONTROLLER

Supplying, installation, testing & commissioning of 6 zone, voice alarm

controller with USB, MP3 player (including 6 zone button paging station)

with seamless integration facility with main fire alarm panel for voice

evacuation complete as required.

50 DIGITAL AMPLIFIERS

Supplying, installation, testing & commissioning of digital audio amplifier

75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.

61 PAGING STATION

Supplying, installation, testing & commissioning of Voice command

keypad 6 zone, with microphone assembly complete as required.

Supplying & laying of 2x1 .5 sqmm fire alarm armoured cable, 600/1 000V

63 17.5.2 rated with annealed copper conductor having XLPE insulation, steel wire RM 630 183.90 1,15,856.37

armouring & FRLS outer sheath complete as required.

Digitally signed by MAYANK

BILL OF QUANTITY (Conference Room)

Sl.No. REF.NO. DESCRIPTION OF ITEM QTY RATE

Supply, Installation, Testing & Commissioning of 4x4 HDMI 18G Matrix Switch with

Audio. Connect eight 4K UHD source devices to

eight 4K UHD screens. Switch between 8 HDMI source devices and 8 HDMI displays

connected simultaneously, Supports resolutions up to 4K 60Hz, with additional

support for HDR, individual Coax and 3.5mm ports allow for a separate

connection of digital speaker systems and amplifiers, features a downscale

function for each output port from 4K to Full HD, making installations with

1 NS-136 olde displays. AV Interface: HDMI, Interface Standard: HDMI 2.0, Supported 1 86,346 86,346

Bandwidth: 18Gbps Maximum Resolution: 4096x2160@60H* 4:4:4 8bit, HDCP

Support: 2.2, Supported Audio: HDMI Audio Pass-through up to 7.1CH, IR

Support: 38kHz, CEC Support, Serial interface: RS232; OLED Display; Control: Push

Buttons, IR, RS232, IP. Special Features: ARC, 4K to 1080p Output Downscale,

Dolby\ Vision, Dolby Atmos, HDR 10. Connectors: Input: 8 x HDMI (Female),

Output: 8 x HDMI (Female), 8 x 3.5mm (Female), 8 x Coax (Female); Control:

RS232 (Female), RJ45 (Female), 3.5mm (Female), Power: 5.5/2.5mm DC socket.

Supply, Installation, Testing and Commissioning of Cable cubby enclosure should

2 NS-137 have minimum 1 no. universal type power socket. 1x USB C, 1x USB A for charging of 2 17,269 34,538

mobile device. Three or more pass through holes for the cables, Metal enclosure

Supply, Installation, Testing & Commissioning of Conferencing Discussion System

With Dante Network Interface, Conference discusion system with OLED display

,which can display the microphone status, operating mode,centralcontroler

status,thenumber of speakers, etc. 4 kinds of conference mode selection: FIFO,

Automatic, Request and Sound activated. The central controler can select the

number of speakers, and active 2/3/4 microphones simultaneously. Supports camera

tracking through RS 232, It is easy to expand and change the configuration.The

central controler connects upto 110 microphone units.

Supply, Installation, Testing & Commissioning of Desktop Base Discussion

Microphone used as a Chairman Microphone for the central control unit,

Engineered in high-quality copper-zinc alloys die cast. The chairman microphone

connects to the central control unit via network category 5 cable. Gooseneck

4 NS-139 microphone with cardioid unidirectional pickup capsule. Speaking status indicator: 1 38,326 38,326

red when mute, green when speaking. Chairman unit has the priority to override all

delegate units. Cardioid Condenser Microphone with Freq response of 50Hz - 20 Khz,

Sensitivity of -20db+/-3db, Max SPL of 110dB, Chairman unit having Mute/Unmute

button with Priority switch for Muting all the delegates.

Supply, Installation, Testing & Commissioning of Desktop Base Discussion

Microphone used as a Delegate Microphone for the central control unit. A desktop

discussion microphone unit engineered in high-quality copper-zinc alloys die cast.

The Delegate microphone connects to the central control unit via network category 5

cable. The microphone with illuminating ring indicates the active status. The Delegate

unit has a mute switch button to control the meeting atmosphere. Cardioid

Condenser Microphone with Freq response of 50Hz - 20 Khz, Sensitivity of -20db+/-

3db,Max SPL of 110dB Deleghate unit having Mute/Unmute button.

Supply, Installation, Testing & Commissioning of Digital Signal Processor with min.

08 AEC enabled Mic/Line inputs, 08 Line outputs, Input channel processings should

include Pre amplifier, Signal generator, Expander, Compressor, 10 band Parametric

EQ or better, Output Channel processing should include 31 band Graphic equilizer,

Delay, Crossover, limiter or better, Other features should include Automatic mixing

console, Ducker, Feedback elimination, Noise elimination, echo elimination or better,

Should have built-in Bi directional USB for Software based VC as well as for playing

digital audio, Should have built in Camera tracking Module, 8 Port GPIO with

Analog/Digital dynamic range of 114dB or better, Sampling rate of 48Khz or better,

per channel phantom power module or better.

Ceiling Speaker of Two-Way 5- Inch Coaxial Ceiling Loudspeaker with Frequency

Range 101 Hz – 20 kHz,Continuous Program Power 20 Watts or better, Transformer

7 NS-142 Taps 20 W, 10 W @ 70V or 100V, Maximum SPL 100 dB or better , Opening angle: 2 8,082 16,164

150° x 150° @ 1KHz or better,Nominal Sensitivity 88 dB or better, With Backcan for

protection or better etc. complete as reqd

Audio Amplifier with Class D Amplifer - Output Power (100V/70V line) 2x 120W Input

sensitivity of 1V (±0.1V) or better, with Input Impedance 20kOhm (balanced)

8 NS-143 10kOhm (unbalanced) or better, Frequency response of 100 Hz - 15 kHz or better 1 77,299 77,299

with Voltage gain (100V) of 40 dB, THD+N <0.1% or better, S/N rate >95 dB or better,

Crosstalk >70dB or better, Damping factor >200 or better.

Supply, Installation, Testing & Commissioning of Speaker Cable conductor having

1.5 Sqmm, copper conductor PVC insulated.

Supply, Installation, Testing & Commissioning of Microphone Cable 20 AWG x 2

core ATC copper conductor, PE insulated, core twisted in circular

form, Inner sheathed with moisture Proof Polymer, braid shielded (80%) with ATC

copper,outer Jacketed with Matt finish Rugged Flexible PVC.

11 NS-146 SITC of Speaker,Microphone, HDMI,USB and any other accessories 2 86,346 1,72,692

12 NS-147 SITC of Rack with Wheels, Front Glasss door, PDU and other accessories 1 27,343 27,343

Total 9,73,496

Digitally signed by MAYANK

BILL OF QUANTITY (HVAC)

S. No. Description of Item Unit Qty. NS RATE DSR Rate

SUB HEAD 'A' - HVAC EQUIPMENTS

2 1 Outdoor Unit

Supply Installation,Testing & Commissioning of modular type Variable Refrigerant Flow / Variable Refrigerant

Volume air cooled Outdoor unit ssuitable for cooling and heating ,having all hermetically seale dinverter type

Scroll Compressor (s) ,minimum two compressors for above 14HP modules, microprocessor based Controller

,top discharge type condensing unit (s) ,with R410A Refrigerant, vibrationisolators, with suitable foundation

etc.complete as required. The unit shall deliver the rated capacity at AHRI Condition sandwork evenat 50°C

ambient temperature with outtripping. The unit shall be suitable to work on 400V+/-10%,3 Phase ,50 Hz AC

power supply.The unit shall be filled with first charge of the refrigerantand ready for use as required.The COP

at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

6 2 Indoor VRF Units (Nominal Capacity) - Ceiling Mounted Round/4way flow cassette type Unit

Supply,installation ,testing and commissioning of following minimum capacity4-way flow VRV