Balance work for Construction of Residential Quarters Barracks External Development for SHQ-Battalion HQ at Gogoland under frontier Headquarter BSF

Bill of Quantity

Name of the Work: Balance work for Construction of Residential Quarters, Barracks, External Development for SHQ/Battalion HQ at Gogoland under

frontier Headquarter BSF,Kashmir

S.No Item code Description Unit Qty. Rate Amount

Part-A Civil Work DSR-2021

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5

2.6 m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-incharge.

Earth work in excavation by mechanical means (Hydraulic excavator)

/manual means in foundation trenches or drains (not exceeding 1.5

2.8 m in width or 10 sqm on plan), including dressing of sides and

ramming of bottoms, lift upto 1.5 m, including getting out the

excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50 m.

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms,

depth upto 1.5 m including getting out the excavated soil, and then

2.10 returning the soil as required, in layers not exceeding 20 cm in depth,

including consolidating each deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as directed, within a lead

2.10.1 All kinds of soil

3 2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. metre 80.00 255.55 20,444.00

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm

Extra for excavating trenches for pipes, cables etc. in all kinds of soil

5 2.11 for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over metre 100.00 127.00 12,700.00

corresponding basic item for depth upto 1.5 metre).

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth:

consolidating each deposited layer by ramming and watering, lead up

to 50m and lift upto 1.5m.

Extra for every additional lift of 1.5 m or part thereof in excavation

/banking excavated or stacked materials.

Supplying and filling in plinth with Jamuna sand under floors,

includingwatering, ramming, consolidating and dressing complete

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Surface dressing of the ground including removing vegetation and

2.28 inequalities not exceeding 15 cm deep and disposal of rubbish, lead up

to 50 m and lift up to 1.5 m.

Providing and laying in position cement concrete of specified grade

4.1 excluding the cost of centering and shuttering - level :All work up to

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural

10 4.1.8 sources : 8 graded stone aggregate 40 mm nominal size derived from Cum 483.35 6326.05 3,057,666.28

natural sources)

Centering and shuttering including strutting, propping etc. and

removal of form work for :

11 4.3.1 Foundations, footings, bases for columns Sqm 706.71 307.95 217,632.73

Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement: 3 coarse sand (zone-III) derived from natural sources : 6

graded stoneaggregate 20 mm nominal size derived from natural

12 4.17 sources) over 75mm thick bed of dry brick ballast 40 mm nominal Sqm 856.03 681.65 583,515.75

size, well rammed and consolidated and grouted with fine sand,

including necessary excavation, levelling & dressing & finishing the top

REINFORCED CEMENT CONCRETE

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

13 5.1.3 sources : 4 graded stone aggregate 20 mm nominal size derived from Cum 7.63 7945.65 60,625.31

natural sources)

Centering and shuttering including strutting, propping etc. and

removal of form for

14 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 789.04 307.95 242,985.79

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

Suspended floors, roofs, landings, balconies and access

17 5.9.4 Shelves (Cast in situ) Sqm 43.85 766.55 33,609.38

18 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 406.75 608.35 247,447.88

19 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 252.60 804.25 203,153.55

20 5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 65.00 657.75 42,753.75

Small lintels not exceeding 1.5 m clear span, moulding as in cornices,

21 5.9.15 window sills, string courses, bands, copings, bed plates, anchor blocks Sqm 80.66 307.95 24,839.46

5.9.16 Edges of slabs and breaks in floors and walls

24 5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 113.46 814.95 92,466.06

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Extra for additional height in centering, shuttering where ever required

with adequate bracing, propping etc., including cost of de-shuttering

5.11 and decentering at all levels, over a height of 3.5 m, for every

additional height of 1 metre or part thereof (Plan area to be

Suspended floors, roofs, landing, beams and balconies (Plan area to

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse

sand(zone-III) : 4 graded stone aggregate 6mm nominal size ),

5.18 reinforced with 1.6 mm dia mild steel wire, including centering and

shuttering, roughening cleaning, fixing and finishing in cement mortar

1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the

jambs, sills and soffits.

Steel reinforcement for R.C.C. work including straightening, cutting,

5.22 bending, placing in position and binding all complete upto plinth level.

27 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 80834.44 83.50 6,749,675.37

Steel reinforcement for R.C.C. work including straightening, cutting,

5.22A bending, placing in position and binding all complete above plinth

28 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 19717.09 89.65 1,767,637.00

Add for plaster drip course/ groove in plastered surface or moulding to

R.C.C. projections.

Providing and laying in position ready mixed or site batched design

mix cement concrete for reinforced cement concrete work; using

coarse aggregate and fine aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland /Portland Slag cement,

5.33 admixtures in recommended proportions as per IS: 9103 to accelerate

/ retard setting of concrete, to improve durability and workability

without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement as per direction

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the cement

content in design mix is more than 110% of the specified minimum

cement content, the contractor shall have discretion to either re-

or bear the cost of extra cement.

30 5.33.1 All works upto plinth level Cum 788.61 8683.80 6,848,154.88

Concrete of M25 grade with minimum cement content of 330 kg /cum

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

31 5.33.2 All works above plinth level upto floor V level Cum 141.24 10306.20 1,455,688.08

Concrete of M25 grade with minimum cement content of 330 kg /cum

Add for using extra cement in the items of design mix over and above

the specified cement content therein.

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

33 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 171.58 6658.25 1,142,422.92

Brick work with common burnt clay F.P.S. (non modular) bricks of

6.4 class designation 7.5 in superstructure above plinth level up to floor V

level in all shapes and sizes in :

34 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 398.12 8288.35 3,299,730.59

Half brick masonry with common burnt clay F.P.S. (non modular)

6.13 bricks of class designation 7.5 in uperstructure above plinth level up to

35 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 1122.56 1018.05 1,142,823.23

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars

at every third course of half brick masonry.

Brick edging 7cm wide 11.4 cm deep to plinth protection with common

burnt clay F.P.S. (non modular) bricks of class designation 7.5

including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

8.2 approved shade, colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black

Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding

41 8.4 basic item, in facia and drops of width upto 150 mm with epoxy resin metre 408.46 475.55 194,243.15

based adhesive, including cleaning etc. complete.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Extra for providing opening of required size & shape for wash basin/

kitchen sink in kitchen platform, vanity counter and similar location in

42 8.5 marble/ Granite/ stone work, including necessary holes for pillar taps each 38.00 808.15 30,709.70

etc. including moulding, rubbing and polishing of cut edges etc.

Mirror polishing on marble work/Granite work/stone work where ever

required to give high gloss finish complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to

IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle green,

44 8.31 black of any size as approved by Engineer-in-Charge, in skirting, risers Sqm 1150.92 1063.45 1,223,941.30

of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire

45 9.7.8 and 1.4mm wide aperture with matching wood sqm 129.46 1521.60 196,982.53

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction

9.21 with frame of 1st class hard wood and well matched commercial 3

plyveneering with vertical grains or cross bands and face veneers on

both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

25 mm thick (for cupboard) including ISI marked nickel plated bright

finished M.S. piano hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

48 9.23 minimum depth on all edges of flush door shutters (over all area of Sqm 56.70 401.40 22,759.38

door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of

9.24 flush doors (cost of glass excluded) (overall area of door shutter to be

49 9.24.2 Rectangular or square Sqm 0.12 173.95 20.87

Float glass panes 5.0 mm thick glass panes (weight not less than

Providing and fixing nickel plated M.S. pipe curtain rods with nickel

plated brackets :

Providing and fixing M.S. grills of required pattern in frames of

9.48 windows etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

52 9.48.1 Fixed to steel windows by welding kg 1553.49 181.00 281,181.69

Providing and fixing ISI marked oxidised M.S. sliding door bolts with

nuts and screws etc. complete :

Providing and fixing ISI marked oxidised M.S. tower bolt black finish,

(Barrel type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to

IS:4992 with necessary screws etc. complete :

Providing and fixing oxidised M.S. casement stays (straight peg type)

9.68 with necessary screws etc. complete. (Copper oxidized as per

57 9.68.2 250 mm weighing not less than 280 grams each 143.00 51.90 7,421.70

58 9.68.3 200 mm weighing not less than 240 grams each 100.00 45.20 4,520.00

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and

61 9.76 lock with 6 levers and a pair of lever handles of approved quality with each 1.00 723.80 723.80

necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc.

Providing and fixing bright finished brass hanging type floor door

stopper with necessary screws, etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI

marked, anodised (anodic coating not less than grade AC 10 as per IS

: 1868) transparent or dyed to required colour and shade, with

necessary screws etc. complete.

64 9.101.2 Twin rubber stopper each 20.00 62.25 1,245.00

Structural steel work in single section, fixed with or without

65 10.1 connecting plate, including cutting, hoisting, fixing in position and Kg 2001.23 93.05 186,214.18

applying a priming coat of approved steel primer all complete.

Structural steel work riveted, bolted or welded in built up sections,

trusses and framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer all complete.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6

mm angle iron and 3 mm M.S. gusset plates at the junctions and

corners, all necessary fittings complete, including applying a priming

coat of approved steel primer.

67 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces Sqm 2.52 4781.15 12,048.50

Providing and fixing factory made ISI marked steel glazed doors,

windows and ventilators, side /top /centre hung, with beading and all

members such as F7D,F4B, K11 B and K12 B etc. complete of

standard rolled ions, joints mitred and flash butt welded and sash bars

10.11 tenoned and riveted, including providing and fixing of hinges, pivots,

including priming coat of approved steel primer, but excluding the cost

of other fittings, complete all as per approved design, (sectional

weight of only steel members shall be measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete

68 10.11.1 block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarsesand : 6 graded Kg 2403.96 175.65 422,255.78

stone aggregate 20 mm nominal size)

Providing and fixing pressed steel door frames conforming to IS:

4351, manufactured from commercial mild steel sheet of 1.60 mm

thickness, including hinges, jamb, lock jamb, bead and if required

angle threshold of mild steel angle of section 50x25 mm, or base ties

10.14 of 1.60 mm, pressed mild steel welded or rigidly fixed together by

mechanical means, including M.S. pressed butt hinges 2.5 mm thick

with mortar guards, lock strike-plate and shock absorbers as specified

and applying a coat of approved steel primer after pre-treatment of

the surface as directed by Engineer-in-charge:

10.14.2 Profile C

69 10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb metre 136.20 471.25 64,184.25

10.14.3 Profile E

70 10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb metre 10.00 511.40 5,114.00

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for

ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5

mm thick M.S. sheet with its top surface hacked for proper bonding,

71 10.18 top lid shall be screwed into the cast iron/ M.S. sheet box by means of each 68.00 185.20 12,593.60

3.3 mm dia round headed screws, one lock at the corners. Clamp shall

be made of 12 mm dia M.S. bar bent to shape as per standard

Steel work welded in built up sections/ framed work, including cutting,

10.25 hoisting, fixing in position and applying a priming coat of approved

steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing & fixing glass panes with putty and glazing clips in steel

doors, windows, clerestory windows, all complete with :

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement including

cement slurry, but excluding the cost of nosing of steps etc. complete.

75 11.3.1 40mm thick with 20mm nominal size stone aggregate. Sqm 30.03 545.00 16,366.35

Cement plaster skirting up to 30 cm height, with cement mortar 1:3

76 11.6.1 (1 cement : 3 coarse sand), finished with a floating coat of neat Sqm 2.38 570.75 1,355.53

cement. 18 mm thick.

Chequerred precast cement concrete tiles 22 mm thick in footpath &

courtyard, jointed with neat cement slurry mixed with pigment to

11.20 match the shade of tiles, including rubbing and cleaning etc. complete,

on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

77 11.20.1 Light shade pigment using white cement Sqm 7.20 1233.05 8,877.96

Marble stone flooring with 18 mm thick marble stone, as per sample of

marble approved by Engineer-in-charge, over 20 mm (average) thick

11.23 base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

with grey cement slurry, including rubbing and polishing complete

79 11.23.5 Udaipur green marble Sqm 20.21 2100.40 42,457.49

Kota stone slab flooring over 20 mm (average) thick base laid over

and jointed with grey cement slurry mixed with pigment to match the

shade of the slab, including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3

81 11.27 coarse sand) and jointed with grey cement slurry mixed with pigment Sqm 94.07 2038.55 191,774.14

match the shade of the slabs, including rubbing and polishing

Extra for pre finished nosing in treads of steps of Kota stone/ sand

Extra for Kota stone/ sand stone in treads of steps and risers using

single length up to 1.05 metre.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer),

of 1st quality conforming to IS : 15622, of approved make, in colours

84 11.39 White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement Sqm 316.02 1142.80 361,151.14

mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joints with white cement

and matching pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS: 15622, of approved make, in all colours

11.41 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching

pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 %

and conforming to I.S. 15622, of approved make, in all colours &

11.46 shade, in skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with

6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size

and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm running

at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I.

wire at every junction, including fixing perimeter channels 0.5 mm

12.45 thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs

at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25

mm at 230 mm c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board

87 12.45.1 conforming to IS: 2095- (Part I) :2011 (Board with BIS Sqm 655.60 1145.95 751,286.48

certification marks)

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and fixing precoated galvanised iron profile sheets (size,

shape and pitch of corrugation as approved by Engineer-in-charge)

0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120

grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

microns. Sheet should have protective guard film of 25 microns

88 12.50 minimum to avoid scratches during transportation and should be Sqm 800.49 671.55 537,569.63

supplied in single length upto 12 metre or as desired by Engineerin-

charge. The sheet shall be fixed using self drilling /self tapping screws

of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in

horizontal/ vertical or curved surfaces, excluding the cost of purlins,

rafters and trusses and including cutting to size and shape

wherever required.

Providing and fixing precoated galvanised steel sheet roofing

accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating

12.51 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the sheet and polyester top coat

15-18 microns using self drilling/ self tapping screws complete :

90 12.51.2 Flashings/ Aprons.( Upto 600 mm) metre 726.91 412.85 300,104.79

91 12.51.6 Gutter (600 mm over all girth) metre 236.00 1110.60 262,101.60

13.4 12 mm cement plaster of mix :

15 mm cement plaster on rough side of single or half brick wall of

13.16 6 mm cement plaster of mix :

95 13.18 Neat cement punning sqm 435.53 67.80 29,528.60

Extra for providing and mixing water proofing material in cement per bag

plaster work in proportion recommended by the manufacturers. of 50KG

Extra for plastering exterior walls of height more than 10 m from

ground level for every additional height of 3 m or part thereof.

Distempering with 1st quality acrylic distemper (ready mixed) having

VOC content less than 50 gms/litre, of approved manufacturer, of

required shade and colour complete, as per manufacturer's

98 13.42.1 Two or more coats on new work Sqm 5607.06 92.75 520,055.21

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Applying one coat of water thinnable cement primer of approved brand

and manufacture on wall surface :

99 13.43.1 Water thinnable cement primer Sqm 1818.35 64.45 117,192.95

Finishing walls with water proofing cement paint of required shade :

100 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) Sqm 500.00 97.60 48,800.00

13.46 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and

101 13.45.1 including priming coat of exterior primer applied @ 2.20kg/10 sqm Sqm 1818.35 245.00 445,496.85

13.50 Applying priming coat:

With ready mixed pink or Grey primer of approved brand and

manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate primer of approved brand

and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

104 13.61.1 Two or more coats on new work Sqm 12208.45 131.45 1,604,800.80

Preparation and consolidation of sub grade with power road roller of 8

to 12 tonne capacity after excavating earth to an average of 22.5 cm

105 16.1 depth, dressing to camber and consolidating with road roller including Sqm 2237.00 180.50 403,778.50

making good the undulations etc. and re-rolling the sub grade and

disposal of surplus earthwith lead upto 50 metres.

Extra for compaction of earth work in embankment under optimum

106 16.2 moisture conditions to give at least 95% of the maximum dry density Cum 4325.00 20.55 88,878.75

(proctor density).

16.3 Supplying and stacking at site.

107 16.3.1 90 mm to 45 mm size stone aggregate Cum 166.40 1937.60 322,416.64

108 16.3.2 63 mm to 45 mm size stone aggregate. Cum 124.80 1624.50 202,737.60

109 16.3.6 Stone screening 13.2 mm nominal size (Type A). Cum 124.80 1865.00 232,752.00

110 16.3.7 Stone screening 11.2 mm nominal size (Type B). Cum 83.20 2065.70 171,866.24

Laying, spreading and compacting stone aggregate of specified sizes

to WBM specifications in uniform thickness, hand picking, rolling with

3 wheeled road/vibratory roller 8-10 tonne capacity in stages toproper

112 16.4 grade and camber, applying and brooming requisite type of screening Cum 499.20 865.80 432,207.36

/ binding material to fill up interstices of coarse aggregate, watering

and compacting to the required density .

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and applying tack coat using hot straight run bitumen of

grade VG - 10, including heating the bitumen, spraying the bitumen

16.30 with mechanically operated spray unit fitted on bitumen boiler,

cleaning and preparing the existing road surface as per specifications :

114 16.30.2 On bituminous surface @ 0.50 Kg / sqm Sqm 1664.00 36.60 60,902.40

2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone

chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and

52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2

16.33 mm and 11.2 mm size respectively, including a tack coat with hot

straight run bitumen, including consolidation with road roller of 6 to 9

tonne capacity etc. complete (tack coat to be paid for

With paving Asphalt grade VG - 10 heated and then mixed with

solvent at the rate of 70 grams per kg of asphalt

Providing and laying seal coat of premixed fine aggregate ( passing

2.36 mm and retained on 180 micron sieve) with bitumen using 128

116 16.40 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and Sqm 1664.00 79.85 132,870.40

0.60 cum of fine aggregate per 100 sqm of road surface, including

rolling and finishing with road roller all complete.

Painting runway/taxi track/apron marking with adequate nos of coats

to give uniform finish with road marking paint of superior make as

16.47 approved by the Engineer-in-charge, i/c cleaning the surface of all

dirt, scales, oil, grease and other foreign material etc. and lining out

117 16.47.1 New work (Two or more coats) Sqm 409.00 158.50 64,826.50

Providing, laying and making kerb channel 30 cm wide and 50 mm

thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded

stone aggregate 20 mm nominal size) over 75mm bed of dry brick

118 16.63 ballast 40 mm nominal size, well rammed and consolidated and Sqm 150.00 529.80 79,470.00

grouted with fine sand, including finishing the top smooth etc.

complete and as per direction of Engineer-in-charge.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and laying at or near ground level factory made kerb stone

of M-25 grade cement concrete in position to the required line, level

and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse

sand), including making joints with or without grooves (thickness of

119 16.69 joints except at sharp curve shall not to more than 5mm), including Cum 61.00 8613.55 525,426.55

making drainage opening wherever required complete etc. as per

direction of Engineer-in-charge (length of finished kerb edging shall be

measured for payment). (Precast C.C. kerb stone shall be approved by

Engineer-in-charge).

Providing and laying factory made chamfered edge Cement Concrete

paver blocks in footpath, parks, lawns, drive ways or light traffic

parking etc, of required strength, thickness & size/ shape, made by

table vibratory method using PU mould, laid in required colour &

pattern over 50mm thick compacted bed of sand, compacting and

120 16.91.1 proper embedding/laying of inter locking paver blocks into the sand Sqm 573.68 932.35 534,870.55

bedding layer through vibratory compaction by using plate vibrator,

filling the joints with sand and cutting of paver blocks as per required

size and pattern, finishing and sweeping extra sand. complete all as

per direction of Engineer-in-Charge. 60mm thick cement concrete

paver block of M-35 grade with approved colour, design & pattern.

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and

chisel dressed on top, for paving in floors, drains etc. laid over 20mm

121 16.92 thick base mortar 1:4 (1cement:4 coarse sand) with joints 10mm wide Sqm 25.00 1871.80 46,795.00

filled with same mortar including ruled pointing etc. complete as per

direction of engineer-in charge.

Providing and placing in position 100 mm thick factory made machine

batched & machine mixed Precast RCC Rectangular Covers on drains

of footpath of various sizes, of M-25 grade cement concrete for RCC

work, including cost of centering, shuttering, reinforcement of 8 mm

dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways ,

122 16.93 neat cement punning on finished surface, properly encased on all Sqm 705.48 2617.15 1,846,340.44

edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over

priming coat , reinforcement to be welded at edges with MS sheet and

providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all

leads & lift, handling at site etc. all complete as per direction of

Engineer-in-Charge.

Supplying and stacking at site dump manure from approved source,

2.4 including carriage upto 5 km complete (manure measured in stacks

will be reduced by 8% for payment) :

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

123 2.4.2 Screened through sieve of I.S. designation 16 mm Cu.Mt. 216.25 290.70 62,863.88

124 2.4.3 Screened through sieve of I.S. designation 4.75 mm Cu.Mt. 216.25 319.90 69,178.38

125 2.7 Fine dressing of the ground. Sq.Mt. 4970.00 3.70 18,389.00

Mixing earth and sludge or manure in the required proportion specified

or directed by the Officer-in-charge

Grassing with selection No. 1 grass including watering and

maintenance of the lawn for 60 days or more till the grass forms a

2.10 thick lawn, free from weeds and fit for mowing including supplying

good earth, if needed (the grass and earth shall be paid for

Providing & laying Selection no. 1 doob grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

128 2.34 ramming with required tools wooden and than rolling the surface with Sq.Mt. 4970.00 87.50 434,875.00

light roller make the surface smoothen and light watering the same

maintenance for 30 days or more till the grass establish properly,as

per direction of officer in charge

Providing and laying water proofing treatment to vertical and

22.3 horizontal surfaces of depressed portions of W.C., kitchen and the like

Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal

IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)

mixed with water proofing compound in recommended proportion

including rounding off junction of vertical and horizontal surface.

IIIrd course of applying blown or residual bitumen applied hot at 1.7

kg. per sqm of area.

IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC

129 (iv) sheet should be 100 mm wide and pasted to each other with bitumen Sqm 192.24 774.25 148,841.82

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black

finished reinforced with non-woven polyester matt consisting of a coat

of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the

same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre

and viscocity 70-160 cps. Over the primer coat the layer of membrane

shall be laid using Butane Torch and sealing all joints etc, and

130 14.91.1 preparing the surface complete. The vital physical and chemical Sqm 20.00 563.50 11,270.00

parameters of the membrane shall be as under : Joint strength in

longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear

strength in longitudinal and transverse direction as 300/250N.

Softening point of membrane not less than 150°C. Cold flexibility shall

be upto -2°C when tested in accordance with ASTM, D - 5147. The

laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane : 3 mm thick

Extra for covering top of membrane with Geotextile, 120 gsm non

woven, 100% polyester of thickness 1 to 1.25 mm bonded to the

membrane with intermittent touch by heating the membrane by

Butane Torch as per manufactures recommendation.

Providing and applying integral crystalline slurry of hydrophilic in

nature for waterproofing treatment to the RCC structures like retaining

walls of the basement, water tanks, roof slabs, podiums, reservior,

sewage & water treatment plant, tunnels / subway and bridge deck

etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral

crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3

parts integral crystalline slurry : 1 part water) for horizontal surfaces

and applying the same from negative (internal) side with the help of

22.23 synthetic fiber brush. The material shall meet the requirements as

specified in ACI-212-3R-2010 i.e by reducing permeability of concrete

by more than 90% compared with control concrete as per DIN 1048

and resistant to 16 bar hydrostatic pressure on negative side. The

crystalline slurry shall be capable of self-healing of cracks up to a

width of 0.50mm. The work shall be carried out all complete as per

specification and the direction of the engineerin-charge. The product

performance shall carry guarantee for 10 years against anyleakage.

132 22.23.1 For vertical surface two coats @0.70 kg per sqm Sqm 566.14 406.25 229,995.59

133 22.23.2 For horizontal surface one coat @1.10 kg per sqm. Sqm 282.38 311.50 87,962.62

Providing and Placing in position suitable PVC water stops conforming

to IS:12200 for construction/ expansion joints between two RCC

members and fixed to the reinforcement with binding wire before

pouring concrete etc. complete :

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

134 22.4.1 Serrated with central bulb (225 mm wide, 8-11 mm thick) Rmt 183.40 285.60 52,379.04

Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter

8.10 and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer-in-charge

and finished smooth.

135 8.10.1 White Agaria Marble Stone Sqm 5.40 3061.20 16,530.48

Providing M.S. foot rests including fixing in manholes with 20x20x10

cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) as per standard design :

Providing and fixing in position pre-cast R.C.C. manhole cover and

19.19 frame of required shape and approved quality 19.19.1 L D- 2.5 H D -

137 19.19.3.1 Circular shape 560 mm internal diameter Each 21.00 1494.20 31,378.20

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

139 Total Civil work (DSR-2021 Items)= 63,934,073.79

Civil Work NDSR

NS-1 Rrubbing and polishing in Kota stone slab flooring

Reduction for not done rubbing and polishingi Kota stone in risers of

steps, skirting, dado and pillars

Providing & Laying cement concrete using broken brick/brickbats 25

mm to100 mm size with 50% of cement mortar 1:5 ( 1cement : 5

coarse sand )admixed with proprietary water proofing compound

conforming to is :2645 in sunken and like complete.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Storage to be formed of 19mm commercial board at the back with

fixed shelves made of 19mm thick commercial board with all exposed

edges finished with 2mm thick PVC edge band (factory finished) as per

details & architect approval. Shutters of cabinet to be formed of 19mm

thick commercial board finished with 1mm thk laminate on outer

surfaces and enamel painted whitefrom inside as er specifications..

Rear backing of cabinet to be formed with 12mm commercial plywood

complete in all respect including 100mm high laminate finished

skirting as per approval/details.The cupboard shall have 2 nos drawer

running on 12mm drawer channelof best quality of approved makes.

one drawer shall be lockable. the brass lcok shall be used for the

same. the drawer shall have 100mm Long SS handles fixed by cutting

a chase in the front of the drawer. Storage to be complete with

hardware installed as per the appoved model/make & as directed to

consist of the following: Each Shutter to have 3 nos of automatic

spring loaded hinge of approved make installed strictly a per

manufacturers guidelines with requisite tools/jigs. Each set of shutters

to be provided with 1no. multi purpose lock as specified, SS handles

size 600mm long as per approval, auto bolt, etc. (as per approved

make) Basic price of Laminate @ Rs.550/ Sqmt (front area to be

measured from bottom i/c height of leg/skirting to top of cabinet). the

depth of cupborad shall be 600mm depth including the thickness of

the backing ply.Hardware: All hardware shall be as per the appoved

model/make all complete.

Providing and laying cement concrete brick wall cladding (size and

thickness to be specified by the manufacturer), water absorption 3%

to 6% conforming to IS: 1237:2001, of approved brand &

manufacturer, in brick colours and shade as approved by the architect,

on walls laid with cement based high polymer modified quick set

144 NS-5 tileadhesive (water based) conforming to IS: 15477, in average 6 mm Sqm 95.44 1228.68 117,260.70

thickness, including grouting of joints of 3mm wide using epoxy grout

mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of

hardener and 0.20 kg of resin per kg), including filling / grouting and

finishing complete as per direction of Engineer-in-charge.

145 Total Civil work (NDSR Items)= 803,147.82

146 Total Civil work= 64,737,221.60

Part-B PHE Work Based on DSR-2021

SUBHEAD-I Sanitary

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter

8.10 and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer-in-charge

and finished smooth.

147 8.10.1 White Agaria Marble Stone Sqm 32.00 3061.20 97,958.40

Providing and fixing water closet squatting pan (Indian type W.C. pan

) with 100 mm sand cast Iron P or S trap, 10 litre low level white

17.1 P.V.C. flushing cistern, including flush pipe, with manually controlled

device (handle lever) conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and

floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous

china flushing cistern & C.P. flush bend with fittings & C.I. brackets,

17.30 40 mm flush bend, overflow arrangement with specials of standard

make and mosquito proof coupling of approved municipal design

complete, including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

149 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 3.00 6941.30 20,823.90

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with standard flush

17.4 pipe and C.P. brass spreaders with brass unions and G.I clamps

complete, including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

150 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 15.00 5268.85 79,032.75

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15

mm C.P. brass pillar taps

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS:13983 with C.I. brackets and stainless steel plug 40 mm,

including painting of fittings and brackets, cutting and making good

the walls wherever required :

17.10.1 Kitchen sink with drain board

17.10.2 Kitchen sink without drain board

Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

Providing and fixing PTMT liquid soap container 109 mm wide, 125

mm high and 112 mm distance from wall of standard shape with

bracket of the same materials with snap fittings of approved quality

and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to

17.73 wooden cleats with CP brass screws with concealed fittings

arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing uplasticised PVC connection pipe with brass

18.21.2 45 cm length

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking

159 18.48 arrangement and making necessary holes for inlet, outlet and overflow per litre 12000.00 9.70 116,400.00

pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 :

Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS:8931.

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and fixing PTMT soap Dish Holder having length of 138mm,

163 18.65 breadth 102mm, height of 75mm with concealed fitting arrangements, each 160.00 96.75 15,480.00

weighing not less than 106 gms.

SUBHEAD-II(A): SOIL, WASTE & VENT PIPE

18.58 Providing and fixing PTMT grating of approved quality and colour.

164 18.58.1.2 125 mm nominal dia with 25 mm waste hole each 65.00 45.25 2,941.25

SUBHEAD-III(A) : RAINWATER PIPES (ROOFING) (DSR

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal

12.41 ring conforming to IS : 5382, leaving 10 mm gap for thermal

(i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to

IS : 13592 Type A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

12.42.4 Single tee without door

12.42.6 Shoe (Plain)

Providing and fixing to the inlet mouth of rain water pipe cast iron

grating 15 cm diameter and weighing not less than 440 grams.

SUBHEAD-IV (A) : WATER SUPPLY- INTERNAL WORK (DSR -

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,

i/c cutting and making good the walls etc.

Internal work - Exposed on wall

170 18.10.1 15mm dia nominal bore Meter 4.00 304.15 1,216.60

171 18.10.2 20mm dia nominal bore Meter 3.00 373.35 1,120.05

172 18.10.3 25mm dia nominal bore Metre 6.00 491.20 2,947.20

173 18.10.4 32mm dia nominal bore Metre 5.00 563.60 2,818.00

174 18.10.5 40mm dia nominal bore Metre 5.00 725.15 3,625.75

175 18.10.6 50mm dia nominal bore Metre 5.00 893.20 4,466.00

Painting GI pipes and fittings with enamel paint over a ready mixed

priming coat, both of approved quality for new work.

176 18.38.1 15mm dia nominal bore Metre 4.00 16.40 65.60

177 18.38.2 20mm dia nominal bore Metre 3.00 19.65 58.95

178 18.38.3 25mm dia nominal bore Metre 6.00 25.60 153.60

179 18.38.4 32mm dia nominal bore Metre 5.00 30.70 153.50

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

180 18.38.5 40mm dia nominal bore Metre 5.00 36.05 180.25

181 18.38.6 50mm dia nominal bore Metre 5.00 43.05 215.25

Providing and fixing G.I. Union in G.I. pipe including cutting and

18.46 threading the pipe and making long screws etc. complete (New work)

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

18.16 Providing and fixing brass stop cock of approved quality :

Providing and fixing gun metal gate valve with C.I. wheel of approved

18.17 quality (screwed end) :

Providing orange colour safety foot rest of minimum 6 mm thick

fixing, including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design. plastic

encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to

IS: 1786, having minimum cross section as 23 mmx25 mm and over

199 19.16 all minimum length 263 mm and width as 165 mm with minimum 112 each 150.00 487.10 73,065.00

mm space between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate anchoring

projections on tail length on 138 mm as per standard drawing and

suitable to with stand the bend test and chemical resistance test as

per specifications and having manufacture's permanent identification

mark to be visible even after

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

18.70 plain & brass threaded fittings, including fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Internal work - Exposed on wall

200 18.7.3 25 mm nominal outer dia pipes Metre 5.00 408.55 2,042.75

201 18.7.4 32 mm nominal outer dia pipes Metre 12.00 500.95 6,011.40

202 18.7.5 40 mm nominal outer dia pipes Metre 12.00 674.35 8,092.20

203 18.9.6 50 mm nominal outer dia pipes Metre 12.00 811.85 9,742.20

204 18.9.7 65 mm nominal outer dia pipes Metre 4.00 1576.90 6,307.60

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00

18.80 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good

the same including testing of joints complete as per direction of

Engineer in Charge.

Concealed work, including cutting chases and making good the walls

205 18.8.1 15 mm nominal outer dia pipes Metre 80.00 441.15 35,292.00

206 18.8.2 20 mm nominal outer dia pipes Metre 135.00 513.75 69,356.25

207 18.8.3 25 mm nominal outer dia pipes Metre 165.00 626.05 103,298.25

208 18.8.4 32 mm nominal outer dia pipes Metre 85.00 712.75 60,583.75

EXTERNAL PLUMBING WORKS

Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc.

209 18.12.4 32mm dia nominal bore Metre 300.00 457.70 137,310.00

210 18.12.5 40mm dia nominal bore Metre 100.00 558.35 55,835.00

211 18.12.6 50mm dia nominal bore Metre 50.00 654.20 32,710.00

212 18.12.7 65mm dia nominal bore Metre 50.00 768.60 38,430.00

213 18.12.8 80mm dia nominal bore Metre 400.00 919.10 367,640.00

Constructing masonry Chamber 30x30x50 cm inside, in brick work in

cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged cover fixed in

cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

18.32 stone aggregate 20 mm nominal size), i/c necessary excavation,

foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone

aggregate 40mm nominal size ) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with

C.I. surface box 100mm top diameter, 160 mm bottom diameter and

180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal

18.33 size ) , i/c necessary excavation, foundation concrete 1:5:10 (1

cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal

size) and inside plastering with cement mortar 1:3 (1 cement : 3

coarse sand) 12 mm thick, finished with a floating coat of neat cement

complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

Painting G.I. pipes and fittings with two coats of anti-corrosive

bitumastic paint of approved quality :

SUBHEAD-II(A):SEWERAGE EXTERNAL WORK (SCHEDULED

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes

with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

Constructing brick masonry circular type manhole 0.91 m internal dia

at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4

coarse sand), inside cement plaster 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat

19.90 cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6

graded stone aggregate 40 mm nominal size), and making necessary

channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement, all complete as per standard design :

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade

designation) 560 mm internal diameter conforming to I.S. 12592, total

weight of cover and frame to be not less than 182 kg., fixed in cement

19.9.1 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12mm thick cement plaster at the external

surface shall be paid for separately) :

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Extra depth for circular type manhole 0.91m internal dia (at bottom)

beyond 0.91 m to 1.67 m

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Constructing brick masonry circular manhole 1.22 m internal dia at

bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4

coarse sand) inside cement plaster 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat

19.11 cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 40 mm nominal size) and making necessary

channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement, all complete as per standard design :

1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade

designation) 560 mm internal diameter conforming to I.S. 12592, total

weight of cover and frame to be not less than 182 kg. fixed in cement

19.11.1 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) including centering, shuttering all

complete.(Excavation, foot rests and 12 mm thick cement plaster at

the external surface shall be paid for separately) :

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Extra depth for circular type manhole 1.22 m internal dia (at bottom)

beyond 1.68 m to 2.29 m :

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Constructing brick masonry circular manhole 1.52 m internal dia at

bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4

coarse sand) inside cement plaster 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat

19.13 cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 40 mm nominal size) and making necessary

channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement, all complete as per standard design :

2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade

designation) 560 mm internal diameter conforming to I.S. 12592, total

weight of cover and frame to be not less than 182 kg. fixed in cement

19.13.1 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) including centering, shuttering all

complete.(Excavation, foot rests and 12 mm thick cement plaster at

the external surface shall be paid for separately) :

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Extra depth for circular type manhole 1.52 m internal dia (at bottom)

beyond 2.30 m :

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement

: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :

1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal

size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-

III) : 8 graded stone aggregate 40 mm nominal size), inside plastering

19.7 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of neat

cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame

(light duty) 455x610 mm internal dimensions, total weight of cover

and frame to be not less than 38 kg (weight of cover 23 kg and weight

of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame

(medium duty) 500 mm internal diameter, total weight of cover and

frame to be not less than 116 kg (weight of cover 58 kg and weight of

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry

19.32 brick honey comb shaft with bricks and S.W. drain pipe 100 mm

diameter, 1.8 m long complete as per standard design.

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

231 Total PHE DSR Items 5,295,098.21

SUBHEAD-II(B) : SOIL, WASTE & VENT PIPES(NON -SCHEDULE

Providing and Fixing 15mm C.P brass mixing fitting for kitchen sink

NSP-1 with swinging spout complete. Including cutting and making good the

walls wherever required .

232 C.P. brass mixing fitting (Jaquar cat no. CON-319 with aerator) Each 2.00 1172.83 2,345.67

Supply, Installation, Testing & Commissioning stainless steel cockroch

trap consisting of 0.45 mm thick inner and outer cup and 1.00 mm

thick top grating (Jali) with ring to be fixed inside ‘P’ traps with

cement concrete.

Providing and Fixing PVC pipes type -B conforming to IS: 13592 for

soil, waste and vent pipes including all fittings rubber ring type (plain

NSP-3 or with access door) e.g. bends, junctions, cowls, offsets, access

pieces, jointing with rubber ring joints with lubricant etc. fixed with

clamps to walls with cement concrete 1:2:4 blocks complete in all

For soil, waste and vent pipes

Providing, fixing, jointing and testing in position the following uPVC

pipes conforming to IS 4985 of 6 kg/sqcm pressure rating including all

NSP-4 fittings, solvent weld joints, testing complete for drainage system cut

to required length to be laid under floor including covering all around

with cement concrete and making good the same complete as

For waste pipes

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing and Fixing uPVC cleanout plug with openable cap for uPVC

Providing and Fixing 110x110 mm uPVC 'P' trap/ U Trap with 2-3

inlets required size ftting with seal 50 mm of self cleansing design

NSP-6 floor/urinal trap without vent suspended with supporting clamp or in

sunken portion including cutting and making good the walls and floors

wherever required complete in all respects.

Providing and Fixing uPVC floor drain of following size inlet and

NSP-7 outlet including cutting and making good the walls and floors

wherever required complete in all respects.

SUBHEAD-IV (B) : WATER SUPPLY- INTERNAL WORK (NON-

SCHEDULED ITEMS)

Supply, installation, testing & commissioning of G.I. Pipes Class 'B'

(Medium grade) conforming to I.S. 1239 with G.I. Fittings conforming

to IS : 1879 (Part I to X) such as tees, crosses, plug, socket, elbows,

NSP-8 reducers, flange, check nut, flanges & clamps, hanger, structural steel

supports as required/directed at Site including painting with enamel

paint two or more coats, cutting and making good the walls etc.

complete in all respect as per direction of engineer-in-charge.

241 a 65mm nomial bore Metre 90.25 563.71 50,874.41

242 b 80mm nominal bore Metre 90.25 736.47 66,466.04

SUBHEAD-I(B): WATER SUPPLY - EXTERNAL WORK( NON

SCHEDULED ITEMS)

Providing and fixing 50mm dia GI pipes to IS:1239 medium class with

fittings and screwed cap on top for gravel feeding.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Providing, installing, testing and commissining of variable speed

(VSPS) hydropneumatic system mounted on a common base plate

comprising of vertical centrifugal pumping set with S.S body, stainless

steel impeller and mechanical seal, shaft directly coupled to a TEFC

induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC

supply with 150 mm dia pressure gauge with gunmetal isolation cock,

vibration eliminating pads under foundation, one No. microprocessor

based controller, dedicated variable frequency drive for each pump,

NSP-10 one No.remote sensors, pressure transducers, sequence running

cotroller, dry running Protection,motor control centre, necessary

power and control cabling from MCC to pumps including required

rating of MCB, one No. 60 litre capacity M.S diaphragam tank with

interchangeable butyl rubber membrane,complete in all respects

including stainless steel grade 316 pipe suction and delivery headers

and isolation/ control valves( ball valves/butterfly valves/ Nan return

valves/ vibration eliminators etc as required) , power box, equipped

with fuses/ isolators/circuit breakers as required.

Hyd. System for Domestic Water Supply Pump

Set of Two Pumps ( 1 Working+ 1 Standby)

Capacity 3.0 LPS

245 Total PHE NS Items 694,216.99

246 Total PHE work= 5,989,315.20

Part-C Electric Work Work Based on DSR-2022

SUBHEAD- I: DISTRIBUTION BOARD

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess complete with

2.3 tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/

2.4 recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/ Isolator)

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Supplying and fixing following rating, double pole, 240 volts, isolator

2.12 in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in

2.13 the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"

curve, miniature circuit breaker suitable for inductive load of following

poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, double pole, single phase and

neutral, 240 volts, residual current circuit breaker ( RCCB), having a

2.14 sensitivity current upto 30 milliamperes in the existing MCB DB

complete with connections, testing and commissioning etc as required.

255 Total carried over to Summary 1,255,634.00

SUB-HEAD - II : INTERNAL WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

1.10 surface / recessed medium class PVC conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FR PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan

point/ call bell point (without independent switch etc.) with1.5 sq. mm

1.55 FRLS PVC insulated copper conductor single core cable in surface/

recessed PVC conduit, and earthing the pointwith 1.5 sq. mm FRLS

PVC insulated copper conductor single core cable etc. as required.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit as required

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 3 pin

268 1.31 5/6 amps modular socket outlet and 5/6 amps modular switch, Each 648.00 477.00 309,096.00

connection etc. as required. (For light plugs to be used in residential

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 6 pin

5/6 & 15/16 amps modular socket outlet and 15/16 amps modular

switch, connection etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket

outlet, with 2 pole and earth, metal enclosed plug top along with 20

270 2.18 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in Each 100.00 1,621.00 162,100.00

recess, with chained metal cover for the socket out let and complete

with connections, testing and commissioning etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium class

271 1.12 PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper Metre 2580.00 334 861,720.00

conductor single core cable for loop earthing as

required.Make:KEI,Worldcab,RR Kable,Bonton

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium class

272 1.13 PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper Metre 2250.00 537 1,208,250.00

conductor single core cable for loop earthing as

required.Make:KEI,Worldcab,RR Kable,Bonton

Supplying and fixing of call bell / buzzer suitable for single phase,230

volt complete as required.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

SUB HEAD - IV : SERVER, DATA & NETWORKING

Supplying and fixing following modular switch/ socket on the

1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

275 1.24.6 Telephone socket outlet Each 4.00 148.00 592.00

276 1.24.7 TV antenna socket outlet Each 102.00 148.00 15,096.00

Supplying and fixing following size/ modules, GI box alongwith

1.27 modular base & cover plate for modular switches in recess etc as

C CABLING AND CONDUITING

Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated

annealed copper conductor, unarmored telephone cable in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper braid

and protected with PVC sheath in the existing surface/ recessed steel/

PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface

1.2 conduit, or cutting the wall and making good the same in case of

recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit

1.21 along with accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

SUB HEAD - VI : LIGHTNING PROTECTION SYSTEM

Providing and fixing of lightning conductor finial, made of 25mm dia

300mm long, copper tube, having single prong at top, with 85mm dia

6 mm thick copper base plate including holes etc. complete as

Jointing copper / G.I. tape (with another copper/ G I tape, base of the

287 6.4 finial or any other metallic object) by riveting / nut bolting/ sweating Each 1290.00 113.00 145,770.00

and soldering etc as required.

Providing and fixing GI tape 20mm x 3mm thick on parapet or surface

288 6.7 of wall for lightning conductor as required. (for horizontal run). Metre 2580.00 126.00 325,080.00

289 6.8 Providing and fixing G.I. tape 20mm x 3mm thick on parapet or Metre 1900.00 197.00 374,300.00

surface of wall for lightning conductor as required. (For vertical run.)

Providing and fixing testing joint, made of 20mm x 3mm thick G.I.

290 6.12 strip, 125mm long with 4 Nos. of G.I. bolts, nuts, check nuts and Each 950.00 121.00 114,950.00

spring washers etc. complete as required.

Providing and laying G.I. tape, 32mm x 6mm thick, from earth

electrode directly in ground as required.

Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including

accessories, and providing masonry enclosure with cover plate having

292 5.2 locking arrangement etc. with charcoal or coke and salt complete as Set 108.00 6,855.00 740,340.00

293 Total of Sub-Head - VI 2,142,484.00

SUB HEAD-VII : CABLE & END TERMINATIONS

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size direct in ground including

excavation, sand cushioning, protective covering and refilling the

trench etc as required.

295 7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 150.00 405 60,750.00

296 7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 80.00 422 33,760.00

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

7.5 Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size in the existing RCC/ HUME/

METAL pipe as required.

298 7.5.2 Above 35 sq. mm and upto 95 sq. mm Metre 150.00 57 8,550.00

299 7.5.3 Above 95 sq. mm and upto 185 sq. mm Metre 165.00 77 12,705.00

7.6 Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size in the existing masonry open

duct as required.

300 7.6.2 Above 35 sq. mm and upto 95 sq. mm Metre 70.00 45 3,150.00

301 7.6.3 Above 95 sq. mm and upto 185 sq. mm Metre 50.00 63 3,150.00

7.8 Laying and fixing of one number PVC insulated and PVC sheathed /

XLPE power cable of 1.1 KV grade of following size on cable tray as

302 7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 830.00 45 37,350.00

7.10 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm

thick G.I. plate with inscription there on, bolted /welded to 35 mm X

35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground

9.1 Supplying and making end termination with brass compression gland

and aluminium lugs for following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable of 1.1 KV grade as

310 Total of Sub-Head - VII carried to summary sheet 227,745.00

SUB HEAD-VIII : EXTERNAL LIGHTING

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size direct in ground including

excavation, sand cushioning, protective covering and refilling the

trench etc as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power

7.5 cable of 1.1 KV grade of following size in the existing RCC/ HUME/

METAL pipe as required.

1.17 Supply, laying and termination of the following sizes of 650/1100 volts

grade PVC insulated copper conductor wires in existing conduits

including end terminations with copper lugs.

3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires

Providing, laying and fixing following dia RCC pipe NP2 class (light

duty) in ground complete with RCC collars, jointing with cement

mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep)

and refilling etc as required.

315 Total of Sub-Head - VIII carried to summary sheet 210,220.00

SUB HEAD- IX : EARTHING

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe etc. with charcoal/ coke and

salt as required.

5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground

319 level for conductor earth electrode, including connection/ termination Metre 70.00 51 3,570.00

with GI thimble etc. as required.

5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.

320 pipe FRLSom earth electrode including connection with brass nut, bolt, Metre 70.00 1551 108,570.00

spring, washer excavation and re-filling etc. as required.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe

321 from earth electrode including connection with G.I. nut, bolt, spring, Metre 70.00 706 49,420.00

washer excavation and re-filling etc. as required.

5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in

recess for connections etc. as required.

325 Total of Sub-Head - IX carried to summary sheet 388,650.00

SUB-HEAD III - FANS & LIGHT FIXTURES:

Supply, Installation, Testing and Commissioning of 1200 mm sweep,

BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery

324 DSR-19.1 minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), Each 425.00 2730 1,160,250.00

THD less than 10%, remote or electronic regulator unit for speed

control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.), insulation resistance

more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as r

325 TOTAL RS. Sub-head 1,160,250.00

326 Total Electrical Work- DSR Items 17,582,901.00

SUB-HEAD III - FANS & LIGHT FIXTURES:

SITC of recess mounted LED luminaire (2X2) min

36W(CEILING/WALL) Mounted made CRCA housing having powder

327 NDSR-1.4 coating with high efficiency PET/Prismatic diffuser for homogeneous Each 494.00 2,970.28 1,467,318.84

light distribution. Fixture should have minimum efficacy at System

level (Not Chip Level) ≥100 lumens/watt and a minimum system

lumen output of >3600 lumens.

Supply, Installation, Testing & Commissioning of recess mounted

round LED luminaire 18 watt wall monted, made of die cast aluminium

alloy body having white powder coating with high Translucent Frosted

328 NDSR-1.5 PS/PMMA diffuser for homogeneous light distribution. Fixture should Each 436.00 1,805.21 787,070.36

have minimum efficacy at System level (Not Chip Level) ≥100

lumens/watt and a minimum system lumen output of >1800lumens

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

SITC of pre-wired 600mm, 11Watt LED Light fitting (Application as

Mirror Light) complete with all accessories, housing made of Extruded

329 NDSR-1.6 Aluminium, System Efficacy ->100 LPW or above and a minimum Each 125.00 553.55 69,193.17

system lumen output of >1100 lumens with CRI >80, 6500K ANSI

BIN. suitable for 220 V.

Supply, Installation, Testing & Commissioning of 15W Decorative

WALL BRACKET LIGHT, Housing Material Cast Aluminium with B22

Holder Tye, Diffuser Material PPR with TIN Coated Powder Coated

Finish, Suitable of used with 15W LED Lamp

SUB HEAD - IV : SERVER, DATA & NETWORKING

Supplying and fixing of RJ-11/RJ 45 (Both Twin socket)I/O Telephone

outlet with shutters along with suitable base plate,key stone and

surface/concealed back boxes of adequate module size, etc comple in

333 TOTAL RS. 896.81

SUB HEAD - V : ELECTRICAL PANEL

NDSR-4.1 BUILDING PANEL

1 No. 160amps 4P MCCB(16KA) with thermal Magnetic release (PRTM)

with Class-C transient voltage surge suppression device suitable for 3

phases as per specifications.

1 No.160 amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency,

PF, kWh, kVA, harmonics upto 15th order & %THD) with RS-485 Port.

Sets of 160/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

5 Nos. 63 Amp TPN MCB

5 Nos. 40 Amp tpn MCB

334 Building panel as described above Set 1.00 178,717.70 178,717.70

NDSR-4.2 BUILDING PANEL

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

1 No. 100amps 4P MCCB(16KA) with thermal Magnetic release (PRTM)

with Class-C transient voltage surge suppression device suitable for 3

phases as per specifications.

1 No.100amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency,

PF, kWh, kVA, harmonics upto 15th order & %THD) with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

6 Nos. 63 Amp DP MCB

335 Building panel as described above Set 12.00 96,638.50 1,159,662.05

NDSR-4.3 BUILDING PANEL

1 No. 100amps 4P MCCB(16KA) with thermal Magnetic release (PRTM)

with Class-C transient voltage surge suppression device suitable for 3

phases as per specifications.

1 No.100amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency,

PF, kWh, kVA, harmonics upto 15th order & %THD) with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

6 Nos. 63 Amp DP MCB

336 Building panel as described above Set 5.00 96,638.50 483,192.52

337 TOTAL SUB-Head Building Pannel 1,821,572.27

SUB HEAD-VII : CABLE & END TERMINATIONS

NDSR-5 Supply of MV cable

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

Supply, following sizes of PVC sheathed PVC/XLPE insulated

Aluminium conductor/copper conductor power/ multicore control

armoured cable of 1.1 KV grade.

338 NDSR-5.5 3 ½ C - 120 sq mm Aluminium Metre 250.00 884 220,998.13

339 NDSR-5.7 3 C - 70 sq mm Aluminium Metre 400.00 570 227,936.23

340 NDSR-5.10 4C- 25 sq mm Aluminium Metre 80.00 285 22,765.45

341 NDSR-5.11 4C- 16 sq mm Aluminium Metre 460.00 215 98,824.02

342 NDSR-5.12 4C- 10 sq mm Aluminium Metre 530.00 189 100,049.64

343 Total of Sub-Head - VII carried to summary sheet 670,573.47

SUB HEAD-VIII : EXTERNAL LIGHTING

Supply of following sizes XLPE insulated (Heavy duty) Aluminium or

Copper conductor armoured cables suitable for working voltage upto

and including 1100 Volts complete as required and as per

specifications.

Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size direct in ground including

excavation, sand cushioning, protective covering and refilling the

trench etc as required.

Termination of the following sizes of XLPE insulated Aluminium/

Copper conductor cable including providing terminal lugs,double

compression gland , crimping the joints ,providing insulation

tape,effecting terminal connections to the equipment complete as

345 NDSR-6.2 2 x 6 sq,mm, Al conductor cable Nos. 190.00 610.46 115,987.33

Supply,fixing and laying of Heavy duty PVC pipes complete buried in

floor with joints and other accessories as required.

NDSR-6.4A Supply, erection, testing and commissioning of 4 M high Tubular pole

as per Technical specifications and with following components :-

Including supply and installation of 6 ways-20A connector & 6A MCB

mounted on 6mm thick painted M.S/GI plate, insulated, and fixed

inside the pole suitable for termination of armoured aluminium cable

as required and wiring to Luminaries from the 6A MCB, with 3x2.5

sq.mm. PVC insulated copper, stranded conductor (P+N+PE) double

sheathed wire including terminations.

4 meters high tubular pole with single arm of length 1 meter,

347 smoothly curved making an angle of 10 deg to 15 deg with the Nos. 15.00 19,458.40 291,876.01

horizontal plane complete as required.

Digitally signed by Om

Prakash 16:42:00 IST

S.No Item code Description Unit Qty. Rate Amount

NDSR-6.5A Supply,Receiving and fixing in position, effecting proper connections,

testing and commissioning of 40W Luminaire on existing 4 Mtr pole

as per specifications,complete in all repects including nipple for fixing

of Light fixture on pole.

349 NDSR-6.6 Supply, installation, testing & commissioning of 120W FLOOD Light Nos 4.00 15,746.34 62,985.35

Total of Sub-Head - VIII carried to summary sheet 632,746.10

Total Electrical Work-NDSR 6,572,851.61

Total Electrical Work-DSR+NDSR 24,155,752.61

Grand Total BOQ (Civil + PHE + Electrical) 94,882,289.00

Grand Total BOQ (Civil + PHE + Electrical) 94,882,289.00

Digitally signed by Om

Prakash 16:42:00 IST