Loading…
Loading…
Tender Value
₹15.3 Cr
EMD Value
₹30.6 L
Closing Date
8 Sept 2026, 3:00 pm
Yes (up to 5 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
TENDER SEC
19 conditions · 5 needing a document upload
Financial Eligibility Criteria: The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India. No Technical and Financial credentials are required for tenders having value up to Rs.50 lakh. For tenders costing more than Rs.20 crore, eligibility criteria include bid capacity also as specified in clause 10.3 of IRSGCC- April 2022 - PART I - "Regulations for Tenders and Contracts - For the Guidance of Engineers & Contractors for Works Contracts." The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI. The tenderer will be qualified only if it's available bid capacity is equal to or more than the total bid value of the present tender
A) Technical eligibility criteria for non-composite works costing above Rs.50.00 lakhs As per clause 10.1(a) of IRGCC-2022 ( part-1) :. (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, Or 2.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender or 3.One similar work each costing not less than the amount equal to 60% of advertised value of the tender B ) Technical eligibility for composite tender: 1.Each component of value more than 2 Crs shall be taken for evaluation of technical eligibility as per 10.1(b) of IRSGCC-2022. 2.In case single completion certificate containing more than one component is submitted by the tenderer, value of each component is to be specified in that completion certificate. Separate completed works of minimum required values for each component shall also be considered for fulfilment of technical eligibility criteria 3.In case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility, the certificate shall be treated Incomplete and invalid and shall not be considered for evaluation of technical eligibility. 4.Technical eligibility shall be fulfilled by tenderer as per clause 10.1 of IRSGCC-2022 (Part- I) and 17.15.1(b) of IRSGCC-2022 (Part- I) for the component/components of value of more than 50% of tender value or by Sub- contractor as per clause 7(a)(ii) of GCC (Part-II) for the other component/ components of value less than 50% of tender value. Each other member of JV shall have technical capacity of minimum 10% of advertised value of any component. 5.If the Tenderer proposes to sub- contract any component/components as per item 4 above , which is less than 50% of tender value, then a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the sub- contractor(s) and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility as per clause 7(a)(ii) of Part II of IRSGCC 2022. 6.For component less than Rs 2 Cr, technical Eligibility will not be considered in tender evaluation and the documents of sub-contractor need not be submitted along with tender. 7.The contractor will engage an eligible sub- contractor after award of contract with the approval of Chief Engineer in writing subject to complying clause 7 of Part II of IRSGCC 2022 . Note: Tenderers may see Explanation for Para 10 of the Tender Form (Second Sheet) including Para 10.1 to 10.5 - Eligibility Criteria of IRSGCC-2022.
ATTENTION TO TENDERERS: Tenderers to specifically note that in case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility as laid down in STANDARD TECHNICAL CRITERIA (Point No.1) as above, such certificate shall be treated incomplete and invalid and shall not be considered for evaluation of technical eligibility.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. The work executed by the tenderer for any Govt. /Govt.bodies/PSUs and public listed company shall only be considered for fulfilling of Technical Eligibility Criteria. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause- 27 of SCC 2023.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub- contracting to contractors from such countries as per clause- 27 of SCC 2023.
Components of Works and Value: Component- 1 Building works including Electrical works- Value Rs.101944693/- Component. 2 Track works Value 1.4.1 Rs.31008459/- Component 3. OHE Electrical Works- Value Rs.20062810/- .
Defination of Similar Work :- (1). Any building work including internal electrical wiring and including allied works Tenderer should have valid electrical contractors license in his/their name or he should give an undertaking that he will engage capable agencies for electrical work who has the valid electrical contractors license in his/their own name. AND (2) Any Permanent Way work of Track Linking and/or Rail Renewal and/or Sleeper Renewal and/ or Turnout Renewal and/or Track Maintenance Work. AND (3) Design Supply Erection Testing and Commissioning of 50 Hz Single Phase 25 kV AC OHE System or 25 kV AT Feeding System 2x25 kV.
108 conditions · 1 needing a document upload
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as mentioned in Standard Technical Criteria (as per Pro forma - 1).
Uploading of Scanned copy of work experience certificate issued by public listed company, copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company etc. as per Note for clause 10.1 of IRSGCC- April 2022.
Uploading of Scanned copy/copies of proof(s) of Technically Eligibility Criteria as per clause 7 of IRSGCC-2020, in case the main tenderer proposes execution of any of components mentioned in tender through subcontractor in a composite work as specified in clause 10.1 (b)(iii) of IRSGCC- April 2022.
Uploading of Scanned copy of Bid capacity (as per Pro forma - 2.) and in terms of clause 10.3 & 10.5 of IRSGCC-April 2022.
Uploading of Scanned copy of Statement of payment received in the Last three financial years and the current financial year (as per Pro forma- 2A) along with copies of relevant supporting documents as stipulated.
Uploading of Form 16A/26AS generated through TRACES of Income Tax Department of India, if Client certificate is from other than Govt. Organization.
Uploading of Scanned copy of List of Machinery, Tools & Plants and Staff to be Deployed on this work (as per Pro forma - 3).
Uploading of Scanned copy of Statement of Bank details, PAN & GST (as per Pro forma - 5).
Uploading of Scanned copy of the declaration regarding employment of Retired Engineer / Retired Railway Officer (as per Pro forma - 6).
Uploading a scanned copy of the Memorandum of Understanding in the case of a JV firm (as per Pro forma - 7).
Uploading of request for grant of Mobilization Advance (if applicable) in Proforma-8.
Uploading of Required documents in case of Individual OR Proprietary Firm / Concern OR Partnership Firm OR Company OR J o i n t Venture Firm /HUF/Society, etc., as mentioned in Commercial Compliance (whichever is applicable).
Uploading of Test report of ballast (if applicable).
Uploading of Method Statement (if applicable).
Uploading of Proforma (Proforma-9) attached with Tender Document for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores.
Uploading of (Proforma-10 ) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause- 27 of SCC 2023.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India .
Uploading a scanned copy of Registration Certificate by Startup firms issued by appropriate authority and recognized by Department of Industrial Policy and Promotion (DIPP) towards exemption of full BID Security and Registration Certificate with registration number by Labour Co-operative Society issued by appropriate authority for payment of 50% BID Security.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii)All other documents in terms of explanatory notes in clause 10 of IRSGCC - April-2022-Part-I. (iii)All other documents as per Clause 14 of IRSGCC - April-2022- Part-1.
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of partnership deed or a copy of partnership deed registered with registar . (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract (iv)Other documents as mentioned in terms of para 10 tender form (2nd sheet) of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 and Clause 18 of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v)All other documents in terms of para 10 of tender form (2nd Sheet) of IRSGCC-2022 (vi) All other documents as per Clause 14of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: In case one or more of the members of the JV is/are (A)Partnership firm(s), following documents shall be submitted: (i)A notarized copy of the Partnership Deed or Copy of partnership deed registered with registar , (ii)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (iii)A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (iv) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. In case one or more members is/are (B) HUF, the following documents shall be enclosed: (i) A copy of notarized affidavit on Stamp Paper declaring that his concern is a proprietary concern and he is sole proprietor of the concern or he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. In case one or more members of the JV is/are (C)Companies, the following documents shall be submitted: (i)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (ii)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (iii)A copy of Certificate of Incorporation (iv)A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation of LLP(iii) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement.(iv) A copy of Authorization /copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (v) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In case one or more members of the JV is/are Society/s or Trust/s, the following documents shall be submitted: (E)A copy of Certificate of Registration
i)A copy of Memorandum of Association of Society/Trust Deed A copy of Rules & Regulations of the Society (ii) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust. (F)Other documents as mentioned in terms of para 10 of Tender form(2nd sheet) of IRSGCC-April-2022 Part-I. (G)All other documents as per Clause 14 , 17 & 18 of IRSGCC-April 2022 -Part 1 are to be submitted.
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii)All other documents in terms of Para 10 of Tender form(2nd sheet) of IRS GCC April 2022. (iv) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv). An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (vi) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i)A copy of the Certificate of Registration (ii)A copy of Memorandum of Association of Society / Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Copy of rules and regulations of the society (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (v) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
Any other document required for evaluation of his/ their bid as deemed fit by the tenderer.
Scanned copy of Statement of Bank details, PAN & GST (as per Pro forma - 5).
Request for Mobilization Advance if applicable (as per Proforma- 8).
Proforma-9 for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per Special Conditions of Contract) OR Proforma-10 of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per Special Conditions of Contract)
Uploading of Scanned copy/copies of formal agreement duly executed and notarised by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
The tenderer whether sole proprietor/Company or a partnership firm/JV venture (JV) / Registered Society / Registered Trust/HUF etc., if they want to act through agent or individual(s), should submit along with tender, a copy of Power of attorney duly stamped and authenticated by a notary public or by magistrate in favour of specific persion whether he/they be partner(s) of the firm or any other person agreement, receive money, co-ordinate measurement through contractors authorized engineer, witnessed measurement, sign measurements books, compromise, settle, relinquish any claim(s) preferred by the firm and sign " No Claim Certificate" and refer all or any disputes to arbitiration the above power of attorney shall be submitted even if such specific person is authorized for above purpose through partnership deed/memorandum of understanding/Article of Association or such other document, failing which, tender is liable to be rejected.
YPR-CSDR Doubling (PH-15) - Channasandra Station Yard Remodelling Work: (1) Earthwork in cutting/embankment, yard drains, P-Way works for stabling lines, including Electrical works and other miscellaneous works(Balance Composite work) (2). Upgradation of Channasandra Railway Station under Amrit Bharat Station Scheme (ABSS) under Passenger Amenities (PH-53 Works). (3). CSDR Yard - Construction of 2 Nos. of Spur Lines at CSDR Yard as a part of Traffic Facilities (PH16 Works).- COMPOSITE WORK.
YNK-CSDR-REMODELLING-ABSS~SWR
YNK-CSDR-REMODELLING-ABSS
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹30.6 L
13 Aug 2026
13 Aug 2026
25 Aug 2026
406 items across 12 schedules · ₹14,90,69,831.07 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 5001 | 177.5 | 8,87,677.5 |
| 2 | All kinds of soil. | cum | 2120 | 260.3 | 5,51,836 |
| 3 | Ordinary rock | cum | 100 | 632.95 | 63,295 |
| 4 | Hard rock (blasting prohibited) | cum | 50 | 1,523.05 | 76,152.5 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. | Metre | 50 | 215.6 | 10,780 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Metre | 1000 | 352.15 | 3,52,150 |
| 7 | Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia | Metre | 50 | 998.65 | 49,932.5 |
| 8 | Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia | Metre | 60 | 1,493.6 | 89,616 |
| 9 | Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia | Metre | 300 | 729.8 | 2,18,940 |
| 10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 2805 | 196 | 5,49,780 |
| 11 | All kinds of soil | cum | 40 | 126.8 | 5,072 |
| 12 | 1:2:4 (1 Cement : 2 coarse sand (zone- III) derived from natural sources: 4 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 80 | 7,780.3 | 6,22,424 |
| 13 | 1:3:6 (1 Cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 373 | 7,294.7 | 27,20,923.1 |
| 14 | 1:3:6 (1 Cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 192 | 7,178.75 | 13,78,320 |
| 15 | Foundations, footings, bases for columns | Sqm | 220 | 392.15 | 86,273 |
| 16 | Concrete of M25 grade with minimum cement content of 300 kg /cum | cum | 110 | 9,439.05 | 10,38,295.5 |
| 17 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 13 | 9,045.75 | 1,17,594.75 |
| 18 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 6278.98 | 392.15 | 24,62,302.01 |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 60 | 961.3 | 57,678 |
| 20 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressummers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 1 | 13,899.2 | 13,899.2 |
| 21 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressummers including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but excluding the cost of reinforcement with, 1:1.5:3 (1 cement : 1.5 coarse sand including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 20%). | cum | 108.45 | 13,728.4 | 14,88,844.98 |
| 22 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 1044.6 | 9,504.75 | 99,28,661.85 |
| 23 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 16 | 9,655.7 | 1,54,491.2 |
| 24 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 5 | 10,011.35 | 50,056.75 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 6 | 7,311.25 | 43,867.5 |
| 26 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi- metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 1402 | 5,015.05 | 70,31,100.1 |
| 27 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 2950 | 117.35 | 3,46,182.5 |
| 28 | Hot finished welded type tubes | Kg | 90000 | 194.4 | 1,74,96,000 |
| 29 | Hot finished seamless type tubes | Kg | 3805 | 206.35 | 7,85,161.75 |
| 30 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 1600 | 97.2 | 1,55,520 |
| 31 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 45 | 8,595.15 | 3,86,781.75 |
| 32 | Dark shade pigment using ordinary cement | Sqm | 950 | 1,119.5 | 10,63,525 |
| 33 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 65 | 4,481.3 | 2,91,284.5 |
| 34 | 110 mm diameter | Metre | 153 | 377.4 | 57,742.2 |
| 35 | 110 mm bend | Each | 27 | 150.35 | 4,059.45 |
| 36 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 2904 | 738.65 | 21,45,039.6 |
| 37 | Gutter (600 mm over all girth) | Metre | 414 | 1,313.7 | 5,43,871.8 |
| 38 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 3348 | 170.7 | 5,71,503.6 |
| 39 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 60 | 3,551.25 | 2,13,075 |
| 40 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. | Kg | 2000 | 9.05 | 18,100 |
| 41 | In cement mortar | cum | 162 | 2,060.2 | 3,33,752.4 |
| 42 | Of area 3 sq. metres and below | Each | 27 | 367.2 | 9,914.4 |
| 43 | Of area 3 sq. metres and below | Each | 27 | 143.5 | 3,874.5 |
| 44 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. | Kg | 150 | 3.85 | 577.5 |
| 45 | Thickness above 40 mm up to 75 mm | Sqm | 40 | 433.55 | 17,342 |
| 46 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 200 | 263.95 | 52,790 |
| 47 | On W.B.M. @ 0.75 Kg / sqm | Sqm | 3350 | 60.5 | 2,02,675 |
| 48 | On bituminous surface @ 0.50 Kg / sqm | Sqm | 3350 | 48.2 | 1,61,470 |
| 49 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. | Sqm | 3450 | 88.55 | 3,05,497.5 |
| 50 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 325 | 7,993.8 | 25,97,985 |
| 51 | 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. | cum | 240.68 | 8,505.65 | 20,47,139.84 |
| 52 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | Sqm | 218 | 747.8 | 1,63,020.4 |
| 53 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). | cum | 41 | 10,117.6 | 4,14,821.6 |
| 54 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | cum | 804 | 2,914.3 | 23,43,097.2 |
| 55 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 520 | 2,017.6 | 10,49,152 |
| 56 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Sqm | 1000 | 1,045.65 | 10,45,650 |
| 57 | 20 mm nominal dia Pipes | Metre | 100 | 335 | 33,500 |
| 58 | 25 mm nominal dia Pipes | Metre | 100 | 401.55 | 40,155 |
| 59 | 50 mm nominal dia Pipes | Metre | 100 | 934.15 | 93,415 |
| 60 | 50 mm nominal dia Pipes | Metre | 300 | 794.25 | 2,38,275 |
| 61 | 100 mm nominal dia Pipes | Metre | 639 | 3,271.7 | 20,90,616.3 |
| 62 | 50 mm dia nominal bore | Metre | 500 | 762.15 | 3,81,075 |
| 63 | 25 mm nominal bore | Each | 10 | 622.4 | 6,224 |
| 64 | 20 mm nominal bore | Each | 10 | 539.95 | 5,399.5 |
| 65 | 50 mm nominal bore | Each | 10 | 1,026.65 | 10,266.5 |
| 66 | Horizontal | Each | 2 | 1,371.2 | 2,742.4 |
| 67 | Vertical | Each | 2 | 1,445.15 | 2,890.3 |
| 68 | Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. | Metre | 300 | 960.3 | 2,88,090 |
| 69 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support including fittings & fixtures for tank shall be paid separately. | Per Litre | 10000 | 11 | 1,10,000 |
| 70 | 15 mm nominal bore | Each | 10 | 506.8 | 5,068 |
| 71 | 100 mm dia | Each | 6 | 8,893 | 53,358 |
| 72 | 150 mm diameter | Metre | 150 | 695.8 | 1,04,370 |
| 73 | 250 mm diameter | Metre | 150 | 1,505.6 | 2,25,840 |
| 74 | 250 mm dia. R.C.C. pipe | Metre | 1060 | 899.8 | 9,53,788 |
| 75 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 4 | 12,770.55 | 51,082.2 |
| 76 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 2 | 8,825.4 | 17,650.8 |
| 77 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 6 | 12,725 | 76,350 |
| 78 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 3 | 7,591.8 | 22,775.4 |
| 79 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 8 | 24,702.75 | 1,97,622 |
| 80 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 2 | 9,861.45 | 19,722.9 |
| 81 | With 20x20 mm square bar | Each | 40 | 544.7 | 21,788 |
| 82 | Circular shape 560 mm internal diameter | Each | 30 | 1,675.7 | 50,271 |
| 83 | For pipes 250 to 300 mm diameter | Each | 30 | 922.4 | 27,672 |
| 84 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 4 | 5,957.9 | 23,831.6 |
| 85 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 4 | 8,150.5 | 32,602 |
| 86 | 600 mm dia RCC pipes. | Metre | 118 | 3,401.25 | 4,01,347.5 |
| 87 | 900 mm dia RCC pipes. | Metre | 150 | 5,377.25 | 8,06,587.5 |
| 88 | 1200 mm dia RCC pipes. (Laying by manual/ mechanical means) | Metre | 15 | 9,126.2 | 1,36,893 |
| 89 | 600 mm dia RCC pipes. | Metre | 30 | 3,934.75 | 1,18,042.5 |
| 90 | 200 mm nominal size dia | Metre | 50 | 1,113.35 | 55,667.5 |
| 91 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer- in-charge. | cum | 5 | 1,509.8 | 7,549 |
| 92 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 5 | 1,538.25 | 7,691.25 |
| 93 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. | cum | 13 | 1,538.25 | 19,997.25 |
| 94 | 200 mm dia | Each | 1 | 321.15 | 321.15 |
| Schedule total | ₹7,16,17,107.48 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ReverseAuctionguidelines.pdf
ATTACHMENT
ACS-1toIRSGCC2022.pdf
ATTACHMENT
Proforma-092025.pdf
ATTACHMENT
ACS-8toIRSGCC-2022dated.20.12.2024.pdf
ATTACHMENT
Splattentiontobidder_1.pdf
ATTACHMENT
ACS-5toIRSGCC2022dt.20.10.2023.pdf
ATTACHMENT
ACS-6toIRSGCC-2022.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_4ACS-4toIRSGCC-2022.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.2022.pdf
ATTACHMENT
GCC2022ACS-3_20230426_114140_1.pdf
ATTACHMENT
IRSGCC-APRIL-2022_1.pdf
ATTACHMENT
ACS10toIRSGCC2022.pdf
ATTACHMENT
ASC-7-dt25.09.2024toIRSGCC-2022.pdf
ATTACHMENT
ACS-9toIRSGCC-2022.pdf
ATTACHMENT
SCC112025.pdf
ATTACHMENT
TS-CEMENT-2020REV.pdf
ATTACHMENT
Steel2024.pdf
ATTACHMENT
TSforTrack-2022.pdf
ATTACHMENT
TSTRANS1.pdf
ATTACHMENT
BALLAST2023_1.pdf
ATTACHMENT
ProgramechartYNKCSDR1.pdf
ATTACHMENT
WeblinkaddressforTechSpecificationforDSRUSSORitems.pdf
ATTACHMENT
ACS11toIRSGCC_1.pdf
ATTACHMENT
COMPOSITETENDERDOC31072026.pdf
ATTACHMENT
SpecialConditionofContractorYNK-CSDR.pdf
ATTACHMENT
TechnicalSpecificationYNK-CSDR.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].