Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹10.8 L+₹1.5 L (16.0%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
30 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) NAYA RAIPUR
AGE (I) NAYA RAIPUR C/O HQ COSA, NEAR INTERNATIONAL CRICKET STADIUM ATAL NAGAR RAIPUR-492101
As per BOQ
2023_MES_621168_2
8400/360/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) NAYA RAIPUR
As per NIT
8 documents required · 8 mandatory
₹500
AGE (I) NAYA RAIPUR
₹18,000
19 Jan 2024
4 Nov 2023
2 Dec 2023
4 Nov 2023
30 Nov 2023
11 Nov 2023
Amount
Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.
M&L rendering 10mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.
M&L rendering 5mm thick in cement plaster 1:3 on concrete surfaces of ceilling as specified and directed.
M&L for two coats of cement base paint incl preparation of new surface of wall over and incl a coat of primer complete all as specified and as directed.
M& L for two coat of oil bound distemper incl preparation of new surface of wall over and incl a coat of primer complete all as specified and as directed.
M&L for 1 mm thick averaging Wall care putty on wall all as specified and directed
M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified
Demolition of Unreinforced cement concrete in ground floors and pavings n.exc 15cm thickness below or above ground level.
M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and fair incl filling of expansion joints with sealing compound complete all as specified and as directed.
M&L PCC 25mm thick 1:2:4 of type B0 using 12.5mm graded stone aggregate as in base of floors complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqmeach complete all as specified and directed.
Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.
Refixing of shutter in the same of opening after minor repair as directed by Engr -in-Charge
S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer . (g) Making good of wall surface to match with existing surface complete.
S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids. Making good of wall surfaces to match with existing surfaces complete all as specified and directed.
S&F aluminium anodised windows, ventilators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below :- (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel ventilator with top hang shutter including hinges steel pag stay.complete all as specified and directed.
M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes framed guard bars iron doors.ladders framed balusters, walk ways, Railings, frame work of of water tanks and ssimilar work conforming to Fe410.complete all as specified and directed.
S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .
S&F 125 x 60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates,hinges etc. complete size /profile of frame as per IS complete all as specified and directed.
S&F 0.63 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts,urinal trough and funnels etc , cut to size, edge beaded if directed, holes punched, including round headed screws,clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up,mitred angles, stopped ends, outlets etc as required
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides complete all as specified and directed.
S & F 250 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.
S&F haps and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws complete all as specified and directed.
S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed complete all as specified and directed.
M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.
Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed .
Hacking out old broken glass of (any thickness,size,quality or description) from old wooden frame or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.
S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification and drawing.
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification and drawing.
S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.
S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21
S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.
Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.
M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:4 complete all as specified and as directed.
M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc including 15 mm thick screed bed in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.
M&L providing non- skid glazed joint free ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in dado/skirting etc including 10 mm thick plaster in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.
M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 20mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick plaster in CM 1:4 complete all as specified and as directed.
S&F in repair vitreous china squatting pan "Orissa" pattern size 580mm x 440mm white with integral foot rests excluding flushing cictern and flush pipe incl provision of lime concrete complete all as specified and directed
S & F in Repair 10 ltrs capacity PVC valveless symphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.
Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed.
Ditto all as above items No 52 but 20 mm dia all as specified and directed.
S&F, GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.
Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and directed
S&F, GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.
Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair kitchen sink coupling of any size and any pattern including waste pipe complete all as specified and directed.
S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms) complete all as specified and directed.
S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..
S&F (in repairs)two way angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.
S&F in repair for CP Health Faucet with 1 meter Flexible tube & Hook complete all as specified and directed.
S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.
S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.
S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified and directed.
Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed.
Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed.
S&F rotational moulded polethylene water tank of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.(water tank shall be ISI marked having min three layers).
S&F rotational moulded polyethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.(water tank shall be ISI marked having min three layers).
S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.
S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.
S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.
S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed.
S&F 15mm bore pillar tap cast copper allloy with capstan head Chromium plated screwed down with or without letter Hot or Cold with long shank and fly nuts screwed for iron pipe and fixed as specified and directed.
S&F in repair only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed.
S&F PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified and directed.
S&F in repair CP towel rail(tubular type) 20mm dia, 600 mm long between flanges all as specified and directed.
M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.
Supply only glass dividing strip 3mm thick and 22mm wide in flooring complete all as specified and direcetd.
M&L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channels and base of drains complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and directed.
M&L for machine cut mirror polish kota stone slab flooring18-20mm thich over 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shad of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.
M&L for machine cut mirror polish kota stone slab 18-20mm thich in riser of step, skirting, dado and pillers over and including 10mm thick rendering in CM 1:4 including rubbing and polishing .complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed.
M&L brick work with modular fly ash bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.
Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified & directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed
Supply & fixing 'E' board 605 x 605 x 4 mm thick white prelaminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white,.the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stiching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and directed
S&F in repair fancy type curtain rails harisson rails, mild steel , chromium plated with fixing bracket,stops,rollers etc for hangging curtain rod complete all as specified and directed
S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.
S&F in repair Aluminium Mortiese lock 4 lever , size 75mm as all specified and directed
S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.complete all as specified and directed.
Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 28210.00
FIRST SOLAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .