REPAIR AND MAINT TO VARIOUS B R NATURE COMPLAINT LIKE TILING FALSE CEILING LEAKAGES ETC IN FMU VAJRABAHU FLEET SPORTS COMPLEX AND ASSOCIATED AREAS AT ND MBI UNDER AGE BR I UNDER GE NW KUNJALI COLABA MUMBAI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material and Labour for (450mm x300mm x 7mm or 600x300x7mm) thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of surface, minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using smart care RP or epoxy mortar and applying high performance hybrid polyurea elastomeric waterproofing spray applied anti rood smart care hypertron pure liquid membrane with an elongation of 300% and tensile strength of more than 22 N/mm2 as per DIN 53504, shore A hardness of min 53 as per DIN 53505, CRACK BRIDGING ABILITY of 305 mm as per ASTM C1305. The system includesfinal base preparation, epoxy primer application and applying smartcare hyperton pure or approved equivalent in two with a minimum consumption of 2 Kg/Sqmt etc. Complete as per manufacturer spections etc including removing of existing waterproofing treatment complete all as specified and directed by Engineer-in-Charge.

Material and Labour for providing water proofing treatment with five layered 4mm thick APP (Atactic Poly propylene) modified bituminous membrane re-inforced with no woven polyester mat of weight 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provide a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric provide 22 mm thick hydraullically pressed PCC tiles as per IS laid over cement screed bed in CM 1:4, 20 mm thick jointed and pointed. (An overlap of 100mm & 150mm shall be provided on sides ends respectively) etc including removing of existing waterproofing treatment complete all as specified and directed by Engineer-in-Charge.

Treatment of sunken floor slab comprising of the following specifications and all as specified :- (i) Material & labour for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely 40 mm thick avg PCC (1:2:4) type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost of cutting holes and pipes shall be measured and paid separately) (ii) Rendering of uneven surfaces with 6mm thick CM (1:4) mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting to be carried out. (WPC shall be measured & paid separately) (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy putty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) Material & labour for applying two coats of polymer modified cementious water proof coating as per manufacturers instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be measured and paid separately) (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM (1:4) mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately) Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and shall be tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing shall be deemed to be included in the rates complete all as specified and directed by Engineer-in-Charge.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore. complete all as specified and directed by Engineer-in-Charge.

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down existing GI water tubing complete with all fittings of 25 to 32 mm bore. complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 25 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Dismantling of water tank capacity 375 Ltr, 1000 ltrs, 2000 ltrs 5000 Ltrs removing to store all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs rotational moulded polythene water storage tank of 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs rotational moulded polythene water storage tank of 2000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing rotational moulded polythene water storage tank of 5000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing rotational moulded polythylene water storage loft tank tank of 375 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed specified in SSR Part I. (minimum weight 210 grms ) complete all as specified and directed by Engineer-in-Charge

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness complete all as specified and directed by Engineer-in-Charge.

Material and Labour Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. (colour of granite will be decided by the GE/Engr-in-Charge).

Material and Labour for 20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge. (colour of granite will be decided by the GE/Engr-in-Charge).

Material and Labour for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and Labour for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) in opening as per specifiecation and drawings complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 30 mm thick Rajshri brand factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottoMaterial and Labourock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for decorated IInd class hard wood (berma teak wood)plain, solid, straight, chowkats and frame, arc, wrought, framed, decorated wooden panelling rebated on the solid, rounded or chemfered or arc, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including fixing clips, bends, elbows, shoes etc complete all as specified and directed by Engineer-in-Charge.

S &F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for PVC (SWR) bends any radius 160mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for PVC (SWR) bends any radius 75mm bore complete all as specified and directed by Engineer-in-Charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Material and Labour for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.

Material and Labour for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Medium density fibre board, 12 mm thick exterior grade, fixed to timber/Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floor finished even and fair complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and Fixing vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap .complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed by Engineer-in-Charge.

Material and Labour in repairs for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

Supply and Fixing aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick, stone or concrete surfaces of walls including raking out joints, hacking for key, scrubbing down with water upto G Plus 9th floor of bldg incl scaffolding complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rendering 20mm thick on fair faces of brick work or concrete surface with two coats i.e. (15mm thick back coat in CM (1:6 and 5 mm thick finish coat in cement mortar 1:4 ) finished even and smooth without using extra cement including all safety measure and scaffolding upto any height complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and Labour for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+9 storey of bldg complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of old plaster surface and necessary scaffolding upto G plus 9th floor of bldg complete all as specified and directed by Engineer-in-Charge.

Material and Labour for New plastering wall/ceiling preparation and applying two coat of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair 3 mm thick Aluminium Composite panel cladding plain metallic of approved colour/shade to beam/column/slab in circular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

Material and Labour 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 8 to 12mm thick, toughened glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed by Engr-in-Charge complete all as specified and directed by Engineer-in-Charge.

Supply and Fixingof in repairs vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing PVC connection on pipe 450mm long with brass nut bolt complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing PVC waste pipe 32mm dia 800mm long with socket sutable for WHB/Sink/urinal complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirms to Fe 410-W-250) quality A complete all as specified and directed by Engineer-in-Charge.

All as per Item No 88 above but MS Plate (Plain or Chequred) complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc complete all as specified and directed by Engineer-in-Charge.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base complete all as specified and directed by Engineer-in-Charge..

Material and Labour 100 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in hardstanding laid in alternate panel complete all as specified and directed by Engineer-in-Charge.

Material and Labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of New painted steel surfaces of any description over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs for 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type c-21 etc complete all as specified and directed by Engineer-in-Charge.

All aser item No 96.00 above but 75 mm in size complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy a complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 150 mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Demolition of brick/stone masonry built in CM. complete all as specified and directed by Engineer-in-Charge.

Material and Labour Pre-cast cement concrete block masonry typeC1:3:6 (20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar, complete built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

MADHU ENTERPRIZES

ROHIT CONSTRUCTION

Shree Ayyappa Engineering

jalandhara construction

PRABHU ASSOCIATES

Nilesh Construction