SITC SUB, Pump sets, earthing, column pipe and lighting work for Rural Water supply scheme Tetul Bagan Galudih Pumping plant

Supply of submersible pump set suitable for 6" dia bore well running with 3 phase 415 ± 10% volts 50 C/S 2900 RPM having discharging capacity 2100 GPH against total head of 60 meters with Noryl / G.M Impeller consists of following accessories - (a) 2" dia G.I Column pipe 200' ( 10' long both end threaded one end fitted socket and other end covered by plastic ) (b) 3 Core Flat Copper Cable 4 mm² - 1 Coil (c) M.S Clamp 2" dia - 2 Pairs (d) C.I.D.F Sluice Valve 2" dia - 1 No. (e) ) C.I.D.F Reflex Valve 2" dia - 1 No.

Chemical earthing 3 meters and 80 mm hole size with electrode and chemical compound etc. with watering pipe and locking arrangement including soldering, riveting, jointing G.I flat 50 mm x 6 mm to all equipments.

Supplying triple spur gear type 2 Tonne Capacity chain pulley block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark.

Cost towards renovation of light wiring out side pump Chamber & inside & out side Switch room by doing short point light wiring 4 point long point light wiring 4 points, 150 watt Street light complete set - 36 watt CFL - 4 Nos. etc. all including labour Charges all Complete

Supplying and fixing 100 Amp. 415± 15% voltage change over switch, Havell's / L & T make

Supplying, installation, testing & Commissioning of Outdoor type 63 KVA 11/0.433 KVA Copper wound distribution transformer with off load tap Changer 12.5% to 2.5% in step of 2.5%, continuously rated for three Phase, 50 HZ, full load and temperature rise not exceeding 45 degree centigrade by thermometer in oil and 50 degree centigrade by the resistance in winding after continuous, run at full load rating, the transformer should have oil immersed winding having vector group of 0.4/11, HT side connected in delta & LT side connected in Star with neutral brought out connected. The transformer should have power terminal bushing arrangement on HT side & Cable box in LT side with Standard fitting for mounting of transformer with first filling of transformer oil including all accessories etc. all complete with all materials Make –Synergy for Rural W/S scheme Galudih

Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark 25 mm² x 3½ core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved. from transformer to P/ House Via Gangway.

Transformer Oil for the above stabilizer of best make up to mark.

Supply and construction of DP Structure by supplying erecting, installation and commissioning PCC Pole, top bracket channel, back clamp, 11 KV disc insulator with hardware earthing set complete, M.S angle, top channel, DO fuse AB switch 3 sets of horn gape fuse and 11 KV lightning arrestor, GI wire, Stay set complete nut bolt providing earthing of transformer - Two Nos. ( One No. for neural and one No. for body ) with all required material labour, PCC foudation work for transformer, fabrication work required for the job, all complete.

M/S Anna Traders and Construction