NIT-50 of 19-20 SPECIAL REPAIR TO BLDG NO T-34 AND P-01 AT RAMBAN AND CERTAIN OTHER SANCTIONED WORKS AT METRA CAMP, CHANDERKOT AND BANIHAL UNDER GE (I) 873 EWS

Amount

B/R Portion

Rough Excavation not exceeding 1.5metre depth and getting out in any type of soil, complete all as specified and directed.

Excavating over areas, not exceeding 1.5metre deep and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Plain Cement concrete type E-2, 1:5:10 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone provided in lieu of Stone bond stone under Serial item No. 09 here-in-after shall be deducted from total cumulative quantity of stone masonry.

Precast cement concrete, type C-1 1:3:6 (using 20mm graded crushed stone aggregates) as in bond stone set in cement mortar 1:6 and finishing exposed surfaces including necessary form work, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm, complete all as specified and as directed.

Raised pointing to random rubble masonry, uncoursed or brought up to courses in cement mortar 1:4, complete all as specified and directed.

Rendering 20mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.

PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints as in weep holes all as specified and as directed.

Hand packing of broken stone or boulders of gauge 80 to 150 mm at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels up to 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing up to 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

Mild steel angle cut to length as required for fencing posts including cutting tops to shape as directed, drilling holes, notching for wire, including all necessary drilling, bolting or riveting, necessary welding if required at site, etc including grouting in concrete, and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for fixing angle and necessary form work complete, all as specified and as directed.

Galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc all as specified and as directed.

Barbed razor tape concertina coil, SG hot dip galvanised spring tensile wire, dia of coil when stretched 600mm having minimum 10 number of circles per running metre, minimum 15 clips per running metre and minimum weight of coil 0.96 Kg/RM, fixed on angle iron posts / struts with 3.15mm dia GI wire complete all as specified and as directed. Note : A Board of Officers shall be ordered by the GE to assess the actual weight per RM of the Concertina Coil.

Demolition of brick work masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

RCC type A-1 1:1½:3 (using 20mm graded crushed stone aggregate) as in slab supported on walls, complete all as specified and as directed.

Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified & directed.

TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Providing cement concrete type 1:2:4, B-1 (using 20mm graded stone aggregate) in roof kerbs at junction of parapet wall and roof or mud stops, rounded or chamfered on edges, complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.

Supply only integral water proofing compound all as specified and as directed.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.

50mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floors etc., finishing surface even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in floor, finished even and fair to receive floor finishes, complete all as specified & directed.

Vitrified coloured tiles, light shade, of size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match the colour of tile all as specified and directed.

Non-skid coloured glazed ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 400mm x 400mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 300mm x 200mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

Glazed ceramic coloured wall tiles laid in pattern as approved (Pattern may consist of combination two or more different colour tiles including Digital Highlighters etc.) in vertical surfaces of size 450mm x 300mm x 7 to 8 mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:3, finished fair to received the tile, complete all as specified and directed.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment as in floors including over 15mm screed bed in CM 1:3, complete all as specified & directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

2nd hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Mild steel works as in clamps, hold fasts and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified & directed.

PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in bed block for hold fast and similar works etc. complete all as specified and directed.

35mm thick 2nd class Hard wood factory made rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

Steel windows with side hung shutter including projecting type hinges, steel handle 02 Nos., steel tower bolts 100mm long and steel peg stays lugs including hold fast complete with glazing bars dovetailed or welded including locking arrangement, complete all as specified and as directed.

Steel windows with side hung shutter including projecting type hinges, steel handle 02 Nos., steel tower bolts 100mm long and steel peg stays lugs including hold fast complete without glazing bars dovetailed or welded including locking arrangement, complete all as specified and as directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

Mild steel framed works such as grills, framed guard bars, etc. and similar work conforming to Fe-410-O or Fe-310-O grade, including bending, cutting and welding as required, complete all as specified and as directed.

PVC Door frame of size 100mmx 45mm with a wall thickness of 5mm, made out of extruded 5mm thick Prelam PVC sheet of density 600 Kgs/cbm manufactured by ISO-9000 certified manufacturer, mitre cut at two corners and joined with 4 Nos of 150mm long brackets of 15mm x 15mm MS tube of 19 guage throughout the frame. The door frame shall be fixed to the wall using 65/100mm long mild steel screws through the frame by using anchor fasteners. A minimum of 04 Nos of screws to be provided for each vertical member and minimum 02 Nos for each horizontal member complete as per the manufacturer's instructions and as directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face and 2mm prelam PVC Sheet on back face complete all as specified and as directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 150mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames or stone, concrete or brick surrounds glazed with putty or fixed with beads.

4mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

4mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square not exceeding 0.5 Sqm each complete all as specified and directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and aperture 1.40mm and fixed with tinned tacks or galvanized wire staple all as specified and directed at site

Stainless steel (best quality) Stair Railing for circular void portion, crescent shaped voids as required, vertical height of railing 1000mm, 38mm dia, vertical ballusters, 50mm dia top rail and 03 Nos 19mm dia horizontal pipe running continuously at regular interval with base plate, cover plate, necessary bolts including all accessories for installation complete all as directed. Note : The stainless steel shall be 304 grade. The ballusters shall be matt finished @ 500mm centre to centre distance.

Wrought Iron Ornamental grill of approved design, joints continuously welded with Wrought Iron flats and bars for windows, railings etc. fitted and fixed with necessary screws, lugs in ground floor all as directed. Note : The weight of the grill shall not be less than 16 Kg/Sqm. The weight of grill shall be determined by taking the physical weight of the fabricated grill taken after final grinding and finishing of the welding joints.

Preparation of roof surfcaes by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and roughening old concrete roof surfaces and applying cement slurry with 3.0 Kg of cement per Sqm and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 10mm thick screed bed with cement mortar 1:3 over concrete surface. (b) Applying 2nd course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (f) Applying two coats of aluminium paint over APP membrane complete all as specified and as directed.

Mild steel rolled work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square / rectangle sections, channel or flat section) including distance pieces, cleats etc. confirming to grade FE 410-0 complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

Gypsum board 9mm thick of size 595mm x 595mm as in ceiling fixed with screws on and including Galvanized iron snap grid section of size 24mm x 38mm x 0.7mm thick ‘T’ section and 25mm x 25mm x 0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick grid of size 600mm x 600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion (combination of two shade / colour / pattern) over a coat of cement primer complete all as specified and as directed including making holes, cutting chases and making good the disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 type B-1 as per the existing finish, complete all as specified and directed.

4mm thick designer PVC ceiling board fixed with screws as per manufacturers instructions as in false ceiling fixed on and including hot dipped galvanised iron imposed grid with 24mm wide ‘T’ section, imposed flanges which shall be under coated white. The frame shall comprise of main runner made from 0.33mm thick galvanised steel sheet and size of 24 x 32 x 300mm and spaced at 12mm centre securely fixed to the structural soffits by approved hangers at 1200mm maximum centres hangers of GI wire 4mm dia to be fixed by the approved rawl plug, level adjusters and screws etc.

The last hanger at the end of each runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross Tee with double stiching to be inter locked between main runners at 600 mm centre to from 1200 x 600 mm modules cross Tee longer than 600mm modules to be formed by fitting 600 mm long cross Tee. The Tee perimeter wall angle shall be of 0.45mm thick galvanised steel of size 19 x 19mm and 300 mm long of white colour all as per the manufacturers instructions complete all as specified and directed.

Excavating in any type of soil for post holes (or similar holes) each not exceeding 0.5 cum and getting out and removing surplus soil to a distance not exceeding 50 metre complete all as specified and as directed.

Mild steel framed works such as framework of water tanks and similar work conforming to Fe- 410- O or Fe- 310-O grade, including bending, cutting and welding as required, complete all as specified and as directed.

Plain Cement concrete type B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Dismantling PVC water tanks exceeding 500 ltr capacity but not exceeding 1000ltrs, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms), complete all as specified and directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 15mm dia bore iron pipe complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Bib tap with wall flange cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

Bib tap with wall flange cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop cock / Angle valve with adjustable wall flange CP cast copper alloy, fancy type, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Stop cock / Angle valve with adjustable wall flange CP cast copper alloy, fancy type, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.

Stop cock / Angle valve CP cast copper alloy, fancy type, concealed type, with long shank and cup, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Stop cock / Angle valve CP cast copper alloy, fancy type, concealed type, with long shank and cup, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.

Brass chromium plated centre hole basin mixer, fancy type, for mixing hot & cold water, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions and fixed complete, all as specified. Make : Cera Cat Part No F2005461 or equivalent in Jaquar / MARC / Ess Ess

CP Brass Wall mixer Three-in-One system with provision for both telephone shower and overhead shower complete with adjustable wall flange with bend pipe with or without lettering “Hot or cold” water screwed down for iron pipe complete all as specified and directed. Make : Cera Cat Part No F2005403 or equivalent in Jaquar / MARC / Ess Ess

Stop valve CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Stop valve CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 20mm bore iron pipe or for unions, complete all as specified and directed.

Telephonic hand shower, fancy type, 120mm dia with 150mm lomg arm complete all as specified and directed. Make : Cera Cat Part No F7030502 or equivalent in Jaquar / MARC / Ess Ess

Overhead shower, fancy type, 130mm dia with 3 flow, complete all as specified and directed. Make : Cera Cat Part No F7020502 or equivalent in Jaquar / MARC / Ess Ess

Chromium plated Health Faucet including CP flexible pipe for EWC fixed all as specified and completed. Make : JAQUAR Cat Part No ALD-CHR-585 or equivalent in Cera / MARC / Ess Ess

Toilet Paper Holder, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1151N or equivalent in Cera / MARC / Ess Ess

Corner Glass Shelf assembly (with bracket), fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1173 or equivalent in Hindware / Parryware / Cera

Vitreous china wash down water closet pan (pedestal pattern) size 655mm x 365mm x 745mm with flushing cistern, snow white colour, including ‘P’ trap and soft close seat cover, complete all as specified and directed. Make : Cera 'Cruse' - WC Cat Part No S1031134, Cistern Cat Part No S1060106, Seat Cover Cat part No B1520110 or equivalent in Hindware / Parryware / Neycer

Vitreous china wash down water closet pan (pedestal pattern) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe, fixed in repairs, complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous china wash hand basin 550 x 450mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete all as specified and as directed.

Vitreous china wash hand basin, counter type size 520mm x 450mm, coloured, oval shape, flat back including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side and fitting in granite slab with proper moulding etc., complete all as specified and as directed. Make : Cera 'Clair' Cat Part No S2030101 or equivalent in Cera / MARC / Ess Ess Note : The granite stone slab shall be mesaured and paid seperately.

20mm thick Granite stone (table rubbed and polished) in steps, risers, jambs, pillars, window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in cement mortar 1:4 finished fair to received the granite including rounding the exposed edges, complete all as specified and directed.

Vitreous China urinal with integerated EFS complete with all accessories including CP spreader, PVC connection etc. all as approved complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and union for discharge pipe and waste pipe, complete all as specified and directed. Make : CERA 'Calcia EFS' Cat Part No 54010101 or equivalent in Neycer Kermag / Parryware / HR Jhonson / Hindware

PVC connection 45cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

PVC flexible waste pipe of bore 32mm suitable for fixing to Wash Hand Basin / Kitchen Sink complete all as specified and directed.

Tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges, including pair of brackets, fixed in repair, complete all as specified and directed.

Dismantling of PVC drain pipes of 100 mm bore, jointed in cement mortar and taking out of trenches, if required, complete all as specified & directed.

Dismantling of PVC drain pipes of 75 mm bore, jointed in cement mortar and taking out of trenches, if required, complete all as specified & directed.

PVC pipes, single socketed, in any length of 110mm bore with rubber ring joints, laid in fixed to walls, complete all as specified and directed.

PVC pipes, single socketed, in any length of 75mm bore with rubber ring joints, laid in fixed to walls, complete all as specified and directed.

PVC (SWR) bends, 110mm bore, complete all as specified and as directed.

PVC (SWR) bends, 75mm bore, complete all as specified and as directed.

PVC (SWR) junction (single T) equal or unequal, 100mm bore, complete all as specified and as directed.

PVC (SWR) junction (single T) equal or unequal, 75mm bore, complete all as specified and as directed.

PVC (SWR) Floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified & directed.

PVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement with grating including jointing complete all as specified and directed.

Grating square 150 mm size of PTMT (Minimum weight 100gms), complete all as specified & directed.

Salt glazed stone ware (SGSW) drain pipes of grade 'A' 150mm bore laid in trenches and jointed on concrete bed complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore of pipe plain cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregates) complete all as specified and directed.

Septic tank for 25 users, Brick construction with top of slab at ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CEPZ/C-TD-013/13 Sheet 1/5 & 5/5

Soakage well 1.20m internal dia and 3.00m depth including excavation in any type of soil, PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in footing stone honey comb / solid masonry in cement 1:4 RCC (M-25 design mix) cover slab filled with brick bats including intercepting chamber screen chamber and disposal of soil complete all as specified and shown on CE Pathankot Zone TD Drawing No CEPZ/C-TD-013/13 Sheet 1/5 & 5/5 Note for Serial Item No 124 & 125 : 1. During excavation if unexpected water is encountered, the same shall be bailed out / de-watered by the contractor mechanically or manually without any extra cost. 2. The excavated surplus soil shall be removed to a distance exceeding 500mtr and not exceeding 1500mtr and deposited where directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of cement primer complete all as specified and directed.

Preparation new / old plastered surfaces of wall and applying two coats of oil emulsion distemper roller finish over a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm complete all as specified and as directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

E/M Portion

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box and inner and outer plate for mounting of Modular Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 131 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 131 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 131 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing capping 20/30mm size or as required at site including its fittings and fixtures such as ties, bends, elbows and junction boxesetc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box and inner and outer plate for mounting of Modular Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 135 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 135 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 135 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

Modular switch 1 way 6A, 1 module, complete all as specified and as directed.

Modular switch 1 way 16A, 1 module, complete all as specified and as directed.

Modular Socket, 6A, 2/3 pin combined 2 module, complete all as specified and as directed.

Modular Socket 6A/16A, 2/3 pin combined 2 module, complete all as specified and as directed.

Modular Bell Push, complete all as specified and as directed.

Bell / Buzzer, Ding Dong AC. 230 volts, single pole all as specified and directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Modular Fan step regulator, 120W - 2 module including taking out the unserviceable, complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

LED Lamp 230 volt 10 watts complete all as specified and as directed. Make : Havells / Crompton Greaves / Philips / Wipro

Tube light fitting box type suitable for and including LED 20 tube Rod 4' long with decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. Make : Havells 'E-Lite LED Curve' Cat Part No LHEXBXPNIN1W020 or equivalent in Philips / Wipro / Crompton / Syska

Tube light fitting box type suitable for and including LED 10 tube Rod 2' long with decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. Make : Havells 'E-Lite LED Triyca' Cat Part No LHEXBYPNIN1W010 or equivalent in Philips / Wipro / Crompton / Syska

Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 / Crompton Cat Part No LBHE-10-CDL

Recess mounted LED Downlighter with aluminium housing 12 Watts with all accessories prewired, including any cutting / alteration to false ceiling as required for housing the downlighter complete all as specified and as directed. Make : Crompton 'CROM SQUARE' Cat Part No LSDN-12-CDL/TL/WW or equivalent in Havells / Wipro / Philips / Syska

Ceiling Fan 1200mm sweep, five star energy saving BEE rating, and making connection with three core 23/0.0076 size twisted flexible copper conductor cable upto ceiling rose complete all as specified and directed. Make : Havells / Bajaj / Usha / Crompton / Khaitan.

Exhaust fan, AC, SP 230/240V, 300mm sweep with louver, 1400 RPM complete with accessories complete provisioning of three core flexible copper cord of size 23/0.0076 of required length from connector to fan for connection, complete all as specified & directed. Make : Havells / Bajaj / Usha / Crompton / Khaitan.

Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA, complete all as specified and as directed.

MCB DP 6 to 32 Amp 10 KA, complete all as specified and as directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 2 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

Sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed Note : Punned thickness of 18cms shall be measured for payment.

Supply and laying brick covering with width equal to length of bricks as mechanical protection to underground cable using old size sub class 'B' bricks, laid flat size 230mm x 115mm x 75 mm with width of brick perpendicular to length of cable, all as specified and as directed.

Steel pipe galvanised light grade, 40 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

M/s Ashok Kumar

KOHLI CONSTRUCTION CO

M/S Bilal Ahmad Wani

KUMAR CONSTRUCTION CO

RAJINDRA ENGINEERS & CONTRACTORS

VEER TRADERS

RAMESHWAR ENGINEERS AND BUILDERS

Bidder Name

RAMESHWAR ENGINEERS AND BUILDERS

KUMAR CONSTRUCTION CO

M S BANSI LAL CONSTRUCTION CO

VEER TRADERS

RAJINDRA ENGINEERS & CONTRACTORS

KOHLI CONSTRUCTION CO

M/s Ashok Kumar

M/S Bilal Ahmad Wani