UPGRADATION OF PUMPHOUSE IN FACTORY AREA

Demolishing the existing cement plastered brick masonry/CRS made in Cement mortar of any thickness/concrete as directed and sorting / stacking the useful materials from site a lead of 1.00km including cost of tools, labour, transportation etc., all as directed by EIC.

Demolishing the existing RCC of any grade of any thickness/concrete as directed and sorting / stacking the useful materials from site a lead of 1.00km including cost of tools, labour, transportation etc., all as directed by EIC.

Demolishing the existing structural steel in built up sections in angles.tees.flats and channels including all gusset plates,bolts,nuts,cutting rivets,welding etc. including dismembering and stacking the useful materials from sitewith a lead of 1.00km including cost of tools, labour, transportation etc., all as directed by EIC.

Removing the existing MS fully glazed/wooden windows having approx. size 1.50m x 1.20m from plastered brick wall by cutting the holdfasts and handing over the useful material to stores within a lead of 200m (approx.) including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.

Earth work excavation for laying pipes in trenches,retaining walls,columns,etc., depth not exceeding 1.50 m in hard dense soil other than rock including dewatering if required, getting out and stacking the earth including cost of tools, labour, transportation etc,with a lead of upto 1000mts including cost of tools, labour, transportation etc., all as directed by EIC.

Excavation for foundation of retaining walls,columns, etc. in hard rock at depth from 1.50m to 3.00m and getting out by chiselling etc. without blasting including stacking for taking measurements and disposing the fragments of rocks from site and removal of debris from site with a lead of 1000mts including cost of tools, labour, transportation etc., all as directed by EIC.

Refilling back the excavated earth within the premises after foundation work in layers of thickness not exceeding 150 mm each, ramming watering etc., including cost of tools, transportation from a distance of 500mts etc., all as specified and directed by the EIC.

Supplying,stacking and spreading approved quality morrum in layers not exc. 200mm thick including watering,ramming,levelling and proper compacting attain uniform & levelled surface by spraying water and keeping wheels wet during operation or plate vibrator whereever roller is not accessible, including hire charges of roller / vibrator,labour,cost of fuel,all other incidental charges,etc all as specified and directed by EIC.

Providing and laying plain cement concrete (PCC) 1:3:6 using 20mm down graded hard granite with recycled aggregate for foundation, flooring, approach flooring etc., wherever required, at all depths including mixing, placing in position, proper compacting,formwork, curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC

Providing and laying in position Concrete of M25 grade with minimum cement content of 330 kg /cum, ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement like foundation,columns,beams, chajas, stair case, etc including mechanical vibration, watering, curing, etc. complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. (Steel reinforcement & form work shall be measured and paid separately.)

Providing and laying in position Concrete of M25 grade with minimum cement content of 330 kg /cum, ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement like slabs, etc including mechanical vibration, watering, curing, etc. complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. (Steel reinforcement & form work shall be measured and paid separately.)

Supplying and Fabricating TMT (Fe 500 grade) reinforcement bars of all diameter, conforming to IS, for reinforcement in RCC works as per drawings, including cutting, bending, lapping, hooking, welding wherever required and placing in position with binding wires at all levels and position. Binding wire shall be of approved quality and of 16 SWG, complete with rates including cost of all material, labour, wastages, transportation charges etc., all as directed and approved by EIC.

Providing and removing centering / form work to RCC works for footing,foundations, bases of columns, etc. for mass concrete etc. by providing timber / MS shuttering plates with all required supports, struts, wedges, scafolder, bracings, ladder gangways, dressing with shuttering oil including MS bolts, nuts and washers, temporary openings for filtering for stop, chamfered edges, internal / external splayed, rounded edges or grooves for forming threading etc.for fair finished surface at any height/level complete with rates including cost of material,tools, labour, transportation etc., all as directed and specified by EIC.

Providing and removing centering / form work to RCC works for columns, beams etc. by providing timber / MS shuttering plates with all required supports, struts, wedges, scafolder, bracings, ladder gangways, dressing with shuttering oil including MS bolts, nuts and washers, temporary openings for filtering for stop, chamfered edges, internal / external splayed, rounded edges or grooves for forming threading etc.for fair finished surface at any height/level complete with rates including cost of material,tools, labour, transportation etc., all as directed and specified by EIC.

Providing and removing centering / form work to RCC works for roof slab by providing MS shuttering plates over with MS Jack coupling supports with all required supports, struts, wedges, scafolder, bracings, ladder gangways, dressing with shuttering oil including MS bolts, nuts and washers, temporary openings for filtering for stop, chamfered edges, internal / external splayed, rounded edges or grooves for forming threading etc. for fair finished surface at any height/level complete with rates including cost of material,tools, labour, transportation etc., all as directed and specified by EIC.

Providing and constructing brick work with best locally available frogged flyash bricks in CM 1:6 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, chipping of existing brick walls / concrete surfaces where ever new walls are meeting in order to arrest cracks, applying cement slurry before constructing wall to have proper bond, necessary scaffolding, curing etc., complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Plastering external/internal brickwalls / concrete surfaces with C.M 1:4, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding, at all heights,etc. at heights mentioned below including material,scafolding etc as directed by EIC.

Plastering external/internal brickwalls / concrete surfaces with C.M 1:3, 6 mm thick trowelled to even and smooth finish with floating coat of neat cement including cost of all materials, labour, curing, scaffolding, at all heights,etc. at heights mentioned below including material,scafolding etc as directed by EIC.

Providing impervious coat plastering by rendering Cement mortar 1:3 (one part Cement :three parts coarse sand) over concrete / brick surfaces like ceiling, walls,terrace etc.by mixing with watreproofing chemical from Dr.Fixit/Fosroc/Sika as per manufactures specification finishing smooth and even, using trowel with all necessary scaffolding at all heights, etc., complete with rates including cost of all material, tools, labour, etc., all as directed and approved by EIC.(The cost of watreproofing compund will be paid seperately.)

Providing and laying squared coursed rubble stone (CRS) masonry of approved size in CM 1:6 proportion for foundations and basement with splays and cutting built in proper bond, properly hearted, interstices filled with mortar and bond stones placed at every spacing of 1.5m in each course including leads, lifts, scaffolding, curing, and all other incidental and royalties operational charges etc. complete as directed by the EIC

Providing and applying on old surface of walls / ceilings, beams, columns, parapet walls, etc., including cornices, pilasters by sand papering, dustsing, brooming, scrapping, wahsing, rubbing down wherever required and applying Two coats of APEX ULTIMA exterior emulsion paint of Asian paints (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) or equivalent make of approved shade or as approved by EIC,with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.

Preparatory work on old distempered surface of walls/ceilings, etc. including cornices, pilasters by sand papering, dusting, brooming, rubbing down,scrapping wherever necessary and applying Two coats of Acryllic distemper having VOC (Volatile Organic Compound ) content less than 50 gram/ litre in Asian Paints or equivalent product in Berger make of approved shade including priming coat of interior primer of Asian/Berger or equivalent make of approved shade with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC.Contractor should ensure all safety measures if work is carried out at heights at his own cost.

Disposing the all types of debris, dismantled material, excess earth , heaps ,etc.from factor area to outside to a lead of 1000m approx. including vehicle,labour,fuel charges,driver etc complete all as specified and as directed by EIC.

Supplying, fabricating by welding and erecting M.S rolled structural members like I-Beams,channels , angles,M.S pipes, MS square pipes,pipes,MS hinges,MS aldrop,MS towebolt, chequered plate,plain flats etc for door, windows, ralling, staircase, in position as per the drawing by mechanical means of TATA, SAIL, RINL or equivalent make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and providing a coat of Zinc Chromate primer of ASIAN paints, ICI, BERGER or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.

Painting with synthetic enamel paint with two coats of Synthetic Enamel of ASIAN paints, ICI, BERGER or equivalent make of required colour to give an even shade preferably in alternate black and white colour with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC.

Supplyiing and fixing of Dewatering Submersible pump-7/7.5Hp for draining water/sewage water from houses,commercial buildings and pumping sewage water from sewerage systems of make-Kirloskar/CRI make ,Motor phase-3 Phase,Head-Min. 10mts,Warranty-minimum of 12 months,Discharge range-Flow(LPM)-Min.500 Upto 4800 LPM,Pump shaft:SS410/Carbon Steel,Impellars:Cast Iron/SS,Casing-Cast Iron/SS,Max speed-Minimum 2000 RPM, Voltage range:380 to 440V,.Power cable - Power cable length should be of minimum of 5mts length,Protection--IP 68,Insulation-Class B with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC.

Supplying and fixing of PVC corrugated Heavy duty suction pipe for submerssible pump of desireable green colour-3 inches dia including cost of all materials, labour,tools,fixtures wastage, etc complete all as approved, specified and directed by EIC.

Supplying and fixing of 4 core 2.5 sq mm copper flexible cable for motor power supply connections Make:Polycab/Finolex/Gloster/Finecab No. of core-4,Nominal cross sectional area of the conductor-2.5sq.mm,Conductor material-Plain Copper including cost of all materials, labour,tools,fixtures wastage, etc complete all as approved, specified and directed by EIC.

Supplying,laying fixing,pressure testing and commisioning of Cast Iron Double flanged(screwed or welded) 250 mm dia water pressure pipe make Truform/Hitech pipes or equivalent of class 'B' centrifugally(spun) cast conforming to IS 1536 of approved length , quality make etc, including cost of all materials conveynace lilfiting , laying , fixing with screews , labours charges , plants , tools , wastages all incidental charges taxes, duties, levies etc. complete as directed and approved by EIC.

Suppling laying and fixing flanged cast iron fittings / specials such as tees/bends/collars etc up to 300 mm dia. suitable for flanged jointing by fixing to new pipe line, confirming to IS:1538 with ISI mark of apporved make for the pressure pipe line with necessory rubber /neoprine gaskets , bolts , nuts, washers etc.of approved quality and makeincluding cost of all incidental , operational , labour charges , hire charges of tools & plants etc. completed as siredted by EIC.

Supplying & fixing to water lines 10" dia Ductile Iron sluice values of (non raising spindle type) confirming to relevat IS with inner SS & Gun metal working parts with ISI mark of PN 1.6 test pressure of KARTAR make or equivalant for CI pressure pipe line along withfixing the pipeline with necessory bolts, nuts, CAF gaskets, etc. with rate including cost all materials,transportation, etc complete all as specified /approved and directed by EIC.

Supplying & fixing to water lines 10" dia Ductile Iron non return valves with gunmetal seat with flanged ends in swing type design as per IS:5312 Part-1 with ISI mark of PN 1.6 test pressure of KARTAR/SANT make or equivalant for CI pressure pipe line along with fixing with to pipeline necessory bolts, nuts, CAF gaskets, etc. with rate including cost all materials,transportation, etc complete all as specified /approved and directed by EIC.

Supplying & fixing to water lines 10" dia Ductile Iron foot valves flanges ends swing type operation with double metal seat design as per IS:4038 with ISI mark of KARTAR/SANT make or equivalant for CI pressure pipe line along with fixing to pipeline necessory with bolts, nuts, CAF gaskets, etc. with rate including cost all materials,transportation, etc complete all as specified /approved and directed by EIC.

Sub-total Rs.

(A) Quoted percentage (Excess or below)

(B) Sub-Total Amount excluding GST Rs. [after considering percentage at (A)]

(C)Add 18% GST on Value on (B) in Rs.

(D) Grand Total : [ B+C] in Rs.

GST SAC Code No

Example: 1. If the contractor wish to quote 5% below estimated amount, then they need to enter "- 5 %" in Green colour Column against Quoted percentage (Excess or below) 2. If the contractor wish to quote 2% excess over estimated amount, then they need to enter "2 % " in Green colour Column against Quoted percentage (Excess or below)

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION

HYDERABAD - 500 042.

Pre-Qualification Profile (To Be uploaded along with Part A)

Tender Notice No.:

Estimated Amount in Rs.

Tender Notice Date:

Tender Submission Date:

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Contact person name

Designation

Mobile No.

Ph. No. with STD code

FAX No. with STD code

Email Id :

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

2022-23 (Ending on 31-03-2023) Rs.

2023-24 (Ending on 31-03-2024) Rs.

2024-25 (Ending on 31-03-2025) Rs.

Average annual Financial turn over

Avg Annual Turnover criteria is not met

ESI & PF Nos with proof (If any)

ESI Registration No/. with proof if any

PF Registration No. with proof if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

Branch, Place

Bank Code No.

MICR No.

ECS No.

IFS Code No.

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Name of Bank & Branch

Date of Issue [MM/DD/YYYY]:

#VALUE!

Value in Rs.

Solvency value is NOT as per NIT. Submit required value Solvency

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Completed similar works during last 7 years

Work NoI

Brief Description of Work:

Completed value of Work in Rs. :

Date of Commencement of Work [MM/DD/YYYY]:

Date of Actual Completion of Work [MM/DD/YYYY]:

#VALUE!

Work No II

Brief Description of Work:

Completed value of Work in Rs. :

Date of Commencement of Work [MM/DD/YYYY]:

Date of Actual Completion of Work [MM/DD/YYYY]:

#VALUE!

Work No III

Brief Description of Work:

Completed value of Work in Rs. :

Date of Commencement of Work [MM/DD/YYYY]:

Date of Actual Completion of Work [MM/DD/YYYY]:

#VALUE!

Details of person holding the power of Attorney (If different from contact person)

Position

Mobile No.

Ph. No. with STD code

FAX No. with STD code

DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and award of work.

DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5. I/We have not imposed any condition in price bid, I/We have not modified any part of tender documents issued by HAL.