13/2024-25/EUDC-I/GZB

Amount

Carriage of PCC Pole /ST Pole 8.5/9/11/13 Mtr. Long from Central store GZB/Sahibabad/JE store (Dist.) to site of work including loading unloading of both ends .

Carriage of other line material (Other than pole) as conductor, pin & Disc insulator , MS Channel, angle, Iron stay Rod & Wire Etc from Central store GZB/Sahibabad/JE store (Dist.) to site of work including loading unloading of both ends.

Excavation of foundation pit in mix soil/ Normal Soil/Soft and Hard Rock and its back filling and leveling etc. Erection of Single support and Double Pole with PCC Pole/ST Pole 8.5/9/11 Mtr. Long Including fixing of all accessories and fabrication as required after digging of a suitable size pit for each pole. Work shall be done as per RESPO specification.

Single PCC Pole 8.5 Mtr. Long/ ST Pole /9/11/13 Mtr. Long.

Double Pole of PCC poles 8.5 Mtr. Long/ ST Pole /9/11/13 Mtr. Long.

Grouting about PCC Pole /ST Pole 8.5/ 9/11/13 Mtr. Long of support up to ground level including back filling and proper dressing shall be done as per RESPO specification.

Erection, Fixing of stay rod 16 x 1800 mm after digging of a suitable size pit shall be done as per RESPO specification including fixing of stay wire clamp and nuzzling etc.

Fabrication of M S Top Channel, M S Dropper Channel, T-off Channel & M S Base angle etc including cutting & holes as per RESPO drawing and norms.

Earthing of supports with M.S. Earth Rod 20x2500 mm long including excavation of pit and driving of M.S. Rod 1 Mtr. apart from support 0.5 Mtr. Below ground level and connecting with support with the help G.I wire No.6 SWG.

Binding, Sagging and Jumpering etc. of ACSR conductor on the pole as per RESPO specification and as per direction of engineer in charge it includes cost of labor, T&P carrier etc. prepared for proper completion of work.

Weasel/Rabbit Conductor

Dog/Raccon Conductor

ABC Cable

Construction of plinth of around pole of size 45 mm dia 300mm high above ground level in cc 1:3:6 Complete with all material & shuttering etc. shall be done as per RESPO specification.

Providing & Fixing of Danger Board including clamp etc. as per norms of Safety Department.

Carriage of 11KV 25/63/100 KVA Transformer from Central store GZB/Sahibabad/JE store (Dist.) to site of work including loading unloading of both ends with the help of Crane (Distance up to 0- 50 Km.)

Carriage of 11KV 250 KVA Transformer from Central store GZB/Sahibabad/JE store (Dist.) to site of work including loading unloading of both ends with the help of Crane (Distance up to 0- 50 Km.)

Making of Plinth (Chair) for 250 KVA 11/0.433 KV Transformers with providing all Channels, Angle, Nutt-Bolts & other required materials. Its included the cost of all Channels, Angle, Nutt-Bolts & other required materials etc./Construction of T/F Plinth with cement, concrete, sand and bricks dully plaster around the plinth. Complete work in all respect as per RESPO norms.

Febrication & Fixing of Wire mesh fancing for 250KVA 11/0.433 KV Transformers with providing all Angle, Nutt-Bolts. Its included the cost of all Angle, Nutt-Bolts & other required materials etc. Complete work in all respect as per RESPO norms.

Providing & Making Chamical Earthing and connecting T/F body to G.I strip of size 25x6 mm with the help of nut & bolt. Its include the cost of material, labour, T&P, Carriage etc Doing all necessary work for proper Completion of work.

Mounting, placing & connecting on LT/HT side of 11 KV 25/63/100 KVA Transformer with help of crane.

Mounting, placing & connecting on LT/HT side of 11 KV 250 KVA Transformer with help of crane.

Carriage of 11KV 11 KV metering Cubical/ 11 KV CT/PT Unit from Central store GZB/Sahibabad/JE store (Dist.) to site of work including loading unloading of both ends .

Carriage of 11KV old and used 25/63 KVA Transformer/ 11 KV metering Cubical/ 11 KV CT/PT Unit from site of work to JE store (Dist.)including loading unloading of both ends with the help of Crane (Distance up to 0- 50 Km.)

Dismounting & disconnecting From LT/HT side of 11 KV 25/63 KVA Transformer.

Erection of guarding angle cross arm and other requisite material with guarding by GI wire and providing loops at suitable distance as per RESPO drawing and norms.

Dismounting & disconnecting of 11 KV metering cubica/ 11 KV CT/PT Unit l with dismantling & removing of 11 KV old cable.

Laying of 3 core 35 to 70 Sq. mm. 11 KV XLPE Cable

Laying of 3 core 120 to185 Sq. mm. 11 KV XLPE Cable

Excavation in soft soil for cable trench and refilling the same the cable protected with local sand cushioning and bricks protection along the cable while buried directly in ground in 2.5 feet depth.

Filling, Fixing & Mounting of Cable Box on 3 core 35 to 70 mm Sq.(O/D & I/D)

Filling, Fixing & Mounting of Cable Box on 3 core 120 to185 mm Sq.(O/D & I/D)

Installation 11 KV CT/PT Unit complete. Work shall be done as per RESPO specification.

Installation 11 KV metering cubical complete. Work shall be done as per RESPO specification.

Providing & Fixing of MS holding clamps, LT pin clamps, Stay clamps for ST Pole/Pcc Pole made from 50 X 6 mm MS flat.

Providing & Fixing of all Type ABC clamps, PG clamps, ABC Holding clamps for ST Pole/Pcc Pole.

Supply of GI Pipe 4'' dia of best quality.

Supply of Different sizes of nuts and bolts for different type of clamps with washers of best quality as per requirement.

Divy Electrical Engineering