REPAIR AND MAINTENANCE OF STEEL AND WOODEN FURNITURES AT AF STN DINJAN AND MOHANBARI UNDER GE AF MOHANBARI

Amount

WOODEN FURNITURE Repair to Bed Hard Ply top (Drg No. FD-246) and removing/replacement old u/s fittings /Fixtures and supply and fixing of following new items of best quality 1st class teak wood and minor repairing including applying of two coats of French Polish etc. complete all as specified and as directed by concern and as shwon in drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Head board

Foot board

Long Rail

Short Rail

Stiffeners

Plywood 12mm thick ISI Marked BWR Grade

Veneer with beading (Teak wood Shed) for Head Board

Veneer with beading (Teak wood Shed) for foot Board

S & F Triangle HW supportor legs with rails of size 100 x100 mm with screw

Repairs to Bin soiled linen large (Drg No. FD-224) and removing old u/s fittings /Fixtures and supply and fixing of following new parts whereever required all as directed and minor repair as per required including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top made of 18 mm MDF Board Exterior Grade

Bottom

Legs with support

Front & Back side

Side 6 mm plywood 4 No. ply with 5 mm thick wooden beading

S&F Veneer (Teak wood Shed) for Top/ Front / back

S&F Veneer (Teak wood Shed) for side

Repairs to Chair dining / Chair Wooden Bottom w/o arms/ Chair CB w/o arms (Drg No. FD-228/279/225/285 / DB-3972) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing with following new items of best quality 1st class teak wood and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Rear legs

Front legs.

Front /side rails of seat frame .

Back batten

Stiffener

Seat of 6 mm thick BWR grade plywood

PVC Seat 4 mm thick with wooden batten support

Repairs to Chair dining with long back (Drg No.FD-357) including removing old u/s fitting /Fixture without disturbing to the other parts and supply and fixing of following new items of best quality 1st class teak wood and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Rear legs

Front legs.

Front /side rails of seat frame .

Stiffener

Seat made of 50mm thick 32 density foam shall be coverd with leatherised Rexene of best quality fixed over 10 mm plywood made to shape all complete specified shown on drawing and directed.

Back made of 50mm thick 32 density foam shall be coverd with leatherised Rexena of best quality fixed over 10 mm plywood made to shape all complete specified shown on drawing and directed.

S & F Seat cover of leatherised Rexena of best quality

S & F Back cover of leatherised Rexena of best quality

Repairs to Chair Easy (Drg No. FD-229) including removing old u/s fittings/Fixtures without disturbing to the other parts and S&F of following new items of best quality 1st class teak wood and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Front / Rear legs

Front /side rails of seat/back frame .

Arm rest

Repairs to Chair Easy cushioned (Drg No. FD-358) including removing old u/s cover from seat ,back and arm rest and S&F of following new leatherised Rexena of best quality on seat,back and handel etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Arm rest .

Repairs to Chair Writing ( Drg No.FD-280) including removing old u/s fittings/fixtures without disturbing to the other parts and supply and fixing the following new items of best quality 1st class teak wood and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Rear legs

Front legs.

Front /side rails of seat frame .

Back batten

Arm rest

Stiffiners

Repairs to Hat stand with mirror (FD-233) including removing old u/s fittings/fixtures without disturbing to the other parts and supply and fixing of following new items of best quality 1st class teak wood and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Base of 18 mm thick Pre-laminated MDF Board Exterior Grade with one side teak finish fixed with 5mm thick timber beading around the edging.

Chromium plated metal peg 100 mm long

Mirror 5 mm thick electro copper plated

Repairs to Locker bed side (FD-54 / 222) including removing old u/s fittings/Fixtures without disturbing to the other parts and supply and fixing of following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats Synthetic enamel paint etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade/Block Board

Side of 18 mm Pre laminated MDF Board Exterior Grade /Block Board

Back of 6 mm thick plywood BWR Grade

Shutter made of 18mm Pre laminated MDF Board Exterior Grade /Block Board with piano type hinges and CP Handle 100 mm long.

Shelve made of 18mm Pre laminated MDF Board Exterior Grade /Block Board with Support

Bottom of 18mm Pre laminated MDF Board Exterior Grade /Block Board

Legs of 1st class teak wood

Hasp & staple 75 mm long

Steel Handle 100 mm long

S&F Veneer (Teak wood Shed) for Top

S&F Veneer (Teak wood Shed) for side

S&F Veneer (Teak wood Shed) for shutter

Material and labour for preparation of new / old surface (inside & outside surface) including legs, providing 1st class glossy finish synthetic enamel paint etc. complete specified shown on drawing and directed.

Material and labour for preparation of new /old surface (only outside surface) including legs, Providing 1st class glossy finish synthetic enamel paint etc. complete specified shown on drawing and directed.

Repairs to Mirror with shelves (Drg No. FD-404) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing of following new items and 5 mm thick wooden beading whereever required and minor repair applying two coats of French Polish etc. complete specified shown on drawing and directed.

Shelve of 18mm Prelaminated MDF Board Exterior Grade

Mirror 5.5 mm thick with 25mmx19mm frame and 6mm thick plywood on back side with key plate

Only Mirror 5.5 mm thick

Repairs to Peg Table (FD-227) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing following new items of best quality 1st class teak wood and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Long rails

Short rail

Stiffiners

Repairs to Stool Dressing CB (Drg No. FD-282) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing of following new items of best quality 1st class teak wood and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Long rails

Short rail

Stiffiners

Repairs to Side board (Drg No. FD-241) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade

Side of 18 mm Pre laminated MDF Board Exterior Grade

Back of 6 mm thick plywood BWR Grade

Shutter made of 18mm Pre laminated MDF Board Exterior Grade with piano type hinges and teakwood shad knob 25mm dia .

Shelve made of 18mm Pre laminated MDF Board Exterior Grade

Drawers made of 18mm Pre laminated MDF Board Exterior Grade with one knob 25 mm

Bottom of 18mm Pre laminated MDF Board Exterior Grade

S&F new teakwood shaded knob 25mm dia

Long rail of Bottom of1st class teak wood

Short rail of Bottom of1st class teak wood

Legs of1st class teak wood

Veneer (Teak wood Shed) for Top

Veneer (Teak wood Shed) for side

Veneer (Teak wood Shed) for shutter

Veneer (Teak wood Shed) for Drawer

Repairs to Sofa Chair (Single Piece) with cushion (Drg No.FD-281/373) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Front/Rear legs

Arms rest.

Front/side Rail of seat Frame

Bearers of Seat/back .

Battens

Bottom and upper rails for back frame

Side Rails for back frame

Complete Seat Plywood 12mm thick

Complete back Plywood 12mm thick

Foam cushion made of 100 mm thick 'U' foam, 40 density, ISI marked of size 560mm x 530mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 350/- per RM) duly wraped with long cloth of existing pattern and as directed. (Foum shall be Sleepwell/Kurlon)

Supply cover for foam cushion of size 560mmx530mmx100mm of best quality tapestry cloth of approved quality and colour (not less than Rs. 350/- per RM) duly wraped with long cloth of existing pattern and cover shall be of removablr type by providing best quality plastic Zip over Tapestry cloth complete all as specified and as directed.

Repairs to Sofa 3 Seater (Single Piece) with cushion (FD-281/373) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Front/Rear legs

Arms rest.

Front Rail of seat Frame

Side Rails of seat Frame

Bearers of Seat/back .

Battens

Bottom and upper rails for back frame

Side Rails for back frame

Complete Seat Plywood 12mm thick

Complete back Plywood 12mm thick

Repairs to Table Centre (Drg No. FD-274) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Long rails

Side rail

Stiffiners

S&F Triangle HW supportor legs with rails of size 50x50mm with screw

Repairs toTeapoy (FD-278/382) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18 mm Pre laminated MDF Board Exterior Grade alongwith 5mm Beading

Long rails

Side rail

S&F Triangle HW supportor legs with rails of size 50x50mm with screw

Repairs to Table Bed side (Drg No.FD-248/276) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing of following new items and 5 mm thick wooden beading whereever required and minor repair applying two coats of French Polish etc. complete specified and as directed by concern and asshown on drawing.

Top/bottom of 18 mm Pre laminated MDF Board Exterior Grade

Side of 18 mm Pre laminated MDF Board Exterior Grade

Back of 6 mm plywood

Shelve of 12 mm Pre laminated MDF Board

Veneer (Teak wood Shed) for Top

Veneer (Teak wood Shed) for side

Repairs to Table dining 6 person (Drg No.FD-239/273) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Long rails

Side rail

Stiffiners

S & F Triangle HW supportor legs with rails of size 100 x100mm with screw

Repairs to Table dining 8 person (FD-239/273) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Long rails

Side rail

Stiffiners

S & F Triangle HW supportor legs with rails of size 100 x100mm with screw

Repairs toTable Conference 6'x3' (Drg No.FD-239/273) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Long rails

Side rail

Stiffiners

S & F Triangle HW supportor legs with rails of size 100 x100mm with screw

Repairs to Table Plain (1520x860x760mm)/Table 5'x2'-10" (Drg No.FD-289) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Long rails

Side rail

Stiffiners

S & F Triangle HW supportor legs with rails of size 100 x100mm with screw

Repairs to Table 900x600x760 (Table 3'x2') with and without Drawer (Drg No. FD-283/284) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Complete Drawer with 25 mm knob

Long rails

Side rail

Stiffiners

Repairs to Table 900x900x760 (Table 3'x3') (Drg No.FD-291) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18mm Pre laminated MDF Board Exterior Grade alongwith 5mm beading

Side rails

Stiffiners

S & F Triangle HW supportor legs with rails of size 50 x500mm with screw

Repairs to Table 600x600x760 (Table 2'x2') (Drg No.FD-293) including removing old u/s fittings /fixtures without disturbing to the other parts and supply and fixing following new items and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18 MM Pre laminated MDF Board Exterior Grade alongwith 5mm Beading

Side rails

S & F Triangle HW supportor legs with rails of size 50 x50 mm with screw

Repairs to Table Office Clerk wooden (Drg No.FD-84) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing of following new items of best quality 1st class teak wood and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18 MM Pre laminated MDF Board Exterior Grade

Long rails

Side rail

Stiffiners

Drawer with 25 mm knob and brass lock with duplicate keys

S & F Triangle HW supportor legs with rails of size 100 x100 mm with screw

Repairs to Table Writing (Drg No.FD-275) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing of following new items of best quality 1st class teak wood and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18 mm Pre laminated MDF Board Exterior Grade

Long rails

Side rail

Stiffiners

Side of Box of 18 MM Pre laminated MDF Board Exterior Grade

Bottom of box of 18 MM Pre laminated MDF Board Exterior Grade

Shelve of box of 18 MM Pre laminated MDF Board Exterior Grade

Shutter made of 18mm Pre laminated MDF Board Exterior Grade with piano type hinges and teakwood shad knob 25mm dia .

Drawer with 25 mm knob

Back of box of 6mm plywood

Brass Lock for drawer with duplicate keys

Knob 25mm Teakwood sheded

Veneer (Teak wood Shed) for shutter of Box

Veneer (Teak wood Shed) for side of Box

Repairs to Table Dressing Gents (Drg No.FD-230) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing of following new items of best quality 1st class teak wood and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 12 mm Pre laminated MDF Board Exterior Grade

Bottom of 12 mm Pre laminated MDF Board Exterior Grade

Side of 12 mm Pre laminated MDF Board Exterior Grade

Back of 12 mm Pre laminated MDF Board Exterior Grade

Drawer with 25 mm knob

S&F new teakwood shaded knob 25 mm dia

Mirror 5 mm thick with 6mm thick plywood back side with key plate

S & F Mirror 5 mm thick

Veneer (Teak wood Shed) for Top of Box

Veneer (Teak wood Shed) for side of Box

Veneer (Teak wood Shed) for Front side of Drawer

Repairs to Table Dressing Ladies (Drg No.FD-251) including removing old u/s fittings /Fixtures without disturbing to the other parts and supply and fixing of following new items of best quality 1st class teak wood and 5mm thick wooden beading whereever required and minor repair including applying two coats of French Polish etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 12 mm Pre laminated MDF Board Exterior Grade

Side of 12mm Pre laminated MDF Board Exterior Grade

Back of 6 mm thick plyboard

Bottom of 12 mm Pre laminated MDF Board Exterior Grade

Drawer with 25 mm knob

Mirror 5 mm thick with 6mm thick frame and 6mm thick plywood on back side with key plate

Sliding glass 5 mm thick

Legs with support

Aluminum channel for sliding glass

S&F new teakwood shaded knob 25 mm dia

S&F Mirror 5mm thik

Veneer (Teak wood Shed) for Top of Box

Veneer (Teak wood Shed) for side of Box

Veneer (Teak wood Shed) for Front side of Drawer

Removing of old PVC shoe from various Type of Tables such as Table Writing, table 3'x2' with /witout drawer,Table 3'x3' , table 2'x2' Table office Clerk, table dining 6/8 person, Sofa etc. and replacing the same with new 25mm dia and 20 mm high be screwed to bottom of legs all as specified and as directed.

Removing of old PVC shoe from various Type of Chairs such as Chair dining, Chair Writing, Chair Easy, Chair WB,Chaier CB etc. and replacing the same with new 20 mm dia and 10 mm high be screwed to bottom of legs all as specified an das directed.

Removing of old cane from various chairs such as Chair dining, chair writing, chair easy,chair CB office , chair Tubular Steel,stool dressing CB etc.and replacing the same with new 2mm wide for main caning and border with 3.5 mm wide cane all as specified.

M&L preparing & polishing of new or old wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved All as specified in particular specifications and as shown on drawing and as directed by EIC for the following wooden furniture:-

Almirah mess utencial (FD-93M)

Bed Hard / Bed ply top (FD-246)

Board Notice 3'x2' (FD-366)

Board Notice 5'x3' (FD-99M)

Board Notice 8'x4' (FD-99M)

Board Notice 6'x4' (FD-99M)

Board Notice 4'x3' (FD-99M)

Bin Soiled Lenin Large (FD-244)

Chair Writing (FD-280)

Chair Dining (FD-279)

Chair Dining long back (FD-357)

Chair CB (FD-228)

Chair WB (FD-285)

Chair Easy (FD-229)

Chair Easy with det cushioned (FD-358)

Hat stand with Mirror (FD-233)

Peg Table (FD-277)

Sofa Chair 3 Seater only (FD-281)

Sofa set Single Seater only (FD-281)

Stool dressing CB (FD-282)

Side Board (FD-241)

Table 3'x2' with drawer (FD-283)

Table 3'x2' without drawer (FD-284)

Table 3'x3' (FD-291)

Table 2'x2' (FD-293)

Table Serving 4'x3'(FD-139)

Teapoy (FD-278/382)

Table dressing ladies with mirror (FD-251)

Table dressing gents (FD-230)

Table bed side (FD-276)

Table Centre (FD-274)

Table Dining 6 Person (FD-239/273)

Table Dining 8 Person (FD-239/273)

Table Plain(FD-289)

Table Office Clerk Wooden (FD-84)

Table Writing(FD-275)

STEEL FURNITURE Repair of Almirah large Steel with shelves (Drg No.FD-1031) including removing of existing u/s fittings/fixtures and S&F of following new items and minor repair including applying two coats of Synthetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Welding of shelf with Almirah

Mild steel Legs of size 450x80x100 mm

Mild Steel Shelve

Locking Mild steel rod with locking device

CP Handle with bolts

Mild Steel Butt Hinges 50mm

Complete MS Shutter

Lock 6 lever with duplicate key

Repair of Almirah large steel 1/2 Hanging 1/2 Shelve (Drg No.FD-1033) including removing of existing u/s fittings /fixtures and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Welding of shelf with Almirah

Mild steel Legs of size 450x80x100 mm

Mild Steel Shelve

Locking Mild Steel rod with locking device

Chromium Plated Handle with bolts

Mild Steel Butt Hinges 50mm

Cpmplete MS Shutter

Lock 6 lever with duplicate Keys

CP Hanging Rod ( conduct pipe) 20 mm dia 1.6 mm thick

Socket of CP for Hanging rod 20 mm dia

Repair of Almirah Med steel with shelves ( Steel cupboard with shelve 50"x30"x17") (Drg No. FD-1032) including removing of existing u/s fittings/fixtures and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide,etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Welding of shelf with Almirah

Mild steel Legs of size 450x80x100 mm

Mild Steel Shelve

Locking Mild Steel rod with locking device

CP Handle with bolts

Mild Steel Butt Hinges 50mm

Complete MS Shutter

Lock 6 lever with duplicate Keys

Repair of Almirah Large steel glass door (Drg No.FD-104M) including removing of existing u/s fittings/fixtures and S&F of following new items and minor repair including applying two coats of Synhtetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Welding of shelf with Almirah

Mild steel Legs of size 450x80x100 mm

Mild Steel Shelve

Locking Mild Steel rod with locking device and cover

Chromium Plated Handle with bolts

Mild Steel Butt Hinges 50mm

Shutter glass 5mm thick

Lock 6 lever with duplicate Keys

Repair of Cup board steel large with double door seprate locking arrengment for each door (Drg No.JOR/AF/02/96) including removing of existing u/s fitting/fixtures for each door and refixing / welding with S&F of following new items and minor repair including applying two coats of Synthetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Welding of shelf with Almirah

Mild steel Legs of size 450x80x100 mm

Mild Steel Shelve

Locking Mild steel rod with locking device

CP Handle with bolts

Mild Steel Butt Hinges 50mm

Complete MS Shutter

Lock 6 lever with duplicate key

Repair of Book shelves open large steel ( 1905x915x305 mm) (Drg No.FD-69M) including removing of existing u/s fittings/ fixtures and refixing following new items with nut and bolts and minor repair including applying two coats of Synthetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Shelf of Mild steel sheet

Compelete Slotted angle of 25mm x25mm x 3mm thick Mild Steel Sheet

Corner of 75mm x75 mm x 3 mm thick Mild Steel Sheet

Side of Mild Steel Sheet

Cutting u/s portion of slotted angle and Supply and weld Slotted angle of 25mm x25mm x 3mm thick 100 mm long with existing angle in base

Repair of Book shelves open small steel ( 990x915x305 mm) (FD-69M) including removing of existing u/s fitting/fixtures and refixing following new items with nut and bolts and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Shelf of Mild steel sheet

Complete Slotted angle of 25mm x25mm x 3mm thick Mild Steel Sheet

Corner of 75mm x75 mm x 3 mm thick Mild Steel Sheet

Side of Mild Steel Sheet

Cutting u/s portion of slotted angle and Supply and weld Slotted angle of 25mm x25mm x 3mm thick 100 mm long with existing angle in base

Repair of Book case steel (FD-1028) as appended below : Removing of existing u/s fitting / fixtures of Book case steel and refixing / welding with new items and minor repair applying two coatss of Synthetic enamel paint over a coat of red oxide,etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Shelf MS sheet 1 mm thick

Glass pane 5 mm thick of shutter

Lock 6 lever with duplicate keys

Steel Handle 100 mm long

Complete base of Mild steel sheet

Adjustment of shutter to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.

Repairs to Charpoy GI Pipe/ Square Tublar Hard Top/ Newar for the following (FD-220/ 220(R) etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.) :-

Taking out broken/ u/s long rails from Charpoy GI pipe and Supply and fixing new long rails 1940 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified and directed.

Taking out u/s short rails from Charpoy GI pipe and making short rails for GI charpoy made out of from broken long rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed.

Taking out u/s legs from Charpoy GI pipe and making legs for GI charpoy made out of from broken short rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed.

Taking out u/s check nut from long rails and S&F new check nuts of 6 mm wide,32 mm dia all as spacified and directed.

Removing of old existing u/s plytop from charpoy GI/ MS squre pipe , tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed.

Supply and fixing Stiffener 02 Nos in each charpoy of 40 mm wide and 6mm thick MS flat iron welded to GI Charpoy frame perpendicular to long rail of approprate size on equal distance duly applying two coatss of black paint over a coat of red oxide,and 4 Nos of MS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as spacified and directed.

Welding to frames wherever required at cracked/broken portion all as directed

Repairs to Chair Computer with arm for the following :- Removing old u/s fitting /Fixture of Chair Computer w/arms and supply and fixing new items All complete specified shown on drawing and directed (Godrej PCH-7002)

Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Complete Back 50 mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Arms rest complete.

PVC Base five stare alongwith wheels

Revolving wheels

Hydraulic System with assasarry (Air soft)

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair Computer w/o arm (Odessey FM-4001) for the following :- Removing old u/s fitting /Fixture of Chair Computer w/arms and supply and fixing new items etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Complete Back 50 mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

PVC Base Five stare alongwith wheels

Revolving wheels

Hydraulic System with assasarry (Air soft)

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair with writing pad with cushion seat & back (Vision) for the following :- Removing old u/s fitting /Fixture of Chair with writing pad and supply and fixing new items etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Arms rest complete.

Complete Writing Pad made of 18mm thick Pre laminated MDF Board Exterior Grade alongwith 5mm thick wooden beading and fixing with chair handle with suitable hinges.

Welding to frames wherever required at cracked/broken portion all as directed

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair Revolving Med back (Odessey DR-2003) the following :- Removing old u/s fitting /Fixture of Chair Revolving w/arms and supply and fixing new items etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Arms rest complete.

Base 5 star alongwith wheels

Wheels

Hydraulic System with assessary (Air soft)

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair Revolving High Back (Make-Odessey, Model AT-3001) the following :- Removing old u/s fitting / Fixture of Chair Revolving executive and supply and fixing new items etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Arms rest of black integral skin polyurethane reinforced with MS insert complete.

Base 5 star alongwith wheels

Wheels

Hydraulic System with assessories (Air soft)

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair with cushion seat & back (Godrej PCH-7004) for the following :- Removing old u/s fitting /Fixture of Chair with cushion seat and back and supply and fixing new items etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Welding to frames wherever required at cracked/broken portion

Seat support mild steel strip 450mm x 20 mm x 03 mm with screw applying two coats of Synthetic enamel paint over a coat of red oxide.

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair Tip up with cushioned seat back and arm rest for the following :- Removing old u/s fitting /Fixture of Chair Tip up with cushioned and supply and fixing new items all complete specified and directed (TP)

Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F Arm rest cover for Arm rest and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair Steel Executive Visitor (Chair Writing Steel) ( FD/ E6/ MAP/ 12) for the following :- Removing old u/s fitting /Fixture of Chair Executive visitor (Chair Writing Steel) such as seat,back etc and supply and fixing new items etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.

Seat support mild steel strip 450mm x 20 mm x 03 mm with screw applying two coats of Synthetic enamel paint over a coat of red oxide.

Arms rest complete.

Welding to frames wherever required at cracked/broken portion

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality

Repairs to Chair Tubular Steel with arms (Chair CBA) (FD-75M) for the following :- Removing old u/s fitting /Fixture of Chair CBA steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat of 6 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, texture and quality.

Complete Back 50 mm thick synthetic foam of 32 density made to shape for back of 6 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, texture and quality.

Wooden Handles with 10 mm thick synthetic foam of 32 density made to shape for wooden handle and shall be stitched with superior quality rexine cloth of approved colour, texture and quality.

PVC cap

PVC Stud

Flat iron support of 25/20x5mmand 50 mm long

Welding to frames wherever required at cracked/broken portion

Repairs to Chair Varandah for the following (FD-359) complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.) :-

Removing of old usnsv cane/ Newar from seat & back and prepare the conduit structure for painting by scrapping the old surface and painting with white synthetic enamal paint over a coat of white primer complete as directed.

Weaving the seat and back of Chair Varandah in Godrej pattern with 4 mm wide approved quality cane on steel surface of chair complete all as specified and as directed.

Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed.

Supply and fixing 20 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed

Welding to frames wherever required at cracked/broken portion

Repairs to Locker bed side steel (FD-1029) for the following :- Removing of existing u/s fitting/fixtures of Locker bed side steel and refixing/ welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

CP Hasp and staple 75 mmx20mmx3mm

MS Legs of size 450x80x100 mm

Mild Steel Shelves

Mild Steel Butt Hinges 50mm

Complete Shutter

CP Hanging Rod ( conduct pipe) 20 mm dia 1.6mm thick

Socket of CP for Hanging rod 20 mm dia

Chromium plated Handle 100mm with bolts

Repairs to Locker steel four unit (TP) for the following :- Removing of existing u/s fitting/fixtures of Locker steel four unit and refixing/ welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Mild steel Legs of size 450x80x100 mm

Mild Steel Shelves

Complete Shutter

Chromium plated Handle 100mm with bolts

Lock 6 lever with duplicate Keys

Repairs to Rack shoe steel (FD-MAP/02) for the following:-Taking down existing U/S fitting/fixtures of Shoe Rack and refixing/ welding and minor repair applying two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Net Shelve

Welding to frame wherever required complete all as directed.

Repairs to Rack adjustable 6 tier steel (FD-1038) for the following :- Taking down existing U/S fitting/fixtures of Rack adjustable steel andc refixing/welding with new items and minor repair applying two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Shelves made out of 1 mm thick MS sheet

Vertical angle iron of size 40mmx40mmx4mm

Cutting u/s portion of angle iron and Supply and weld angle iron of40mmx40mmx4mm thick 100mm long with existing angle in base

Repairs to Teapoy Varandah for the following (FD-255) complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.) :-

Taking down old decayed top and supply and fixing new top 18 mm thick pre-laminated MDF Board Exterior Grade exterior grade with 5mm thick timber beading all around the edging complete all as directed.

Removing of rusted MS conduit pipe and Supply and fixing 18mm dia 16 gauge MS conduit pipe including welding/smoothe -ning of joints and painted surface applying one or more coat of synthetic enamel paint white all as specified and directed

Welding to frame wherever required complete all as directed.

S & F new rubber shoes in place of crecked and decayed shoes of leg complete all as directed.

Repairs to Table dining ORs Steel for the following (FD-165M) complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.) :-

Taking down decayed top and S&F new top 18 mm thick pre-laminated MDF Board Exterior Grade exterior grade ISI mark with 5mm thick timber beading all around the edging complete all as directed.

Removing of unserviceable MS Squre tube and Supply and fixing 25mm x 25mm 16 gauge MS Squre tube including welding /smoothening of joints and painted surface applying one or more coat of 1st class synthetic enamel paint white all as specified and directed

Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed.

Welding to frame wherever required complete all as directed.

Repair of Table 900x600x760 with and without Drawer steel (FD-1008/1009) as appended below : Taking down existing U/S fitting/ fixtures of Table 900x600mm with and w/o drawer Steel and refixing /welding with new items and minor repair complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top of 18 MM Pre laminated MDF Board Exterior Grade alongwith 5mm Beading

Drawer made of 1 mm thick MS Sheet

Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.

Brass lock for drawer with duplicate key

Replacement of Rubber shoes with new one

Repair of Table office clerk steel (FD-1004) as appended below : Taking down existing u/s fitting/fixtures of Table office clk Steel and refixing/welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top 18 mm thick pre-laminated MDF Board Exterior Grade exterior grade ISI mark with 5 mm thick timber beading all around the edging and appling two coatss of French Polish to match with existing portion all specified shown on drawing and directed.

Drawer with channel made of 1 mm thick MS Sheet

Adjustment of drawer to easy functioning withnecessary denting / Welding to frame wherever required complete all as directed.

Brass lock for drawer with duplicate key

Replacement of Rubber shoes with new one

Welding to frame wherever required complete all as directed.

Repair of Table office officer steel FD-1003) as appended below : Taking down existing U/S fitting/fixtures of Table office officer Steel and fixing/welding with new items and minor repair dully applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.)

Top 18 mm thick pre-laminated MDF Board Exterior Grade exterior grade ISI mark with 5 mm thick timber beading all around the edging and appling two coatss of French Polish to match with existing portion all specified shown on drawing and directed.

Drawer with channel made of 1 mm thick MS Sheet

Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.

Brass lock for drawer with duplicate key

Replacement of Rubber shoe with new one

Welding to frame wherever required complete all as directed.

Removing dents, bends welding to broken portion rectifying all minor defects and repairs. Material and labour for preparation of new and old steel surface (inside & outside surface) including doors shelves and legs. Providing 1st class glossy finish synthetic enamel paint over a coat of red oxide primer wherever required. complete all as specified and as directed by concern and as as shown on drawing. (Note:-Rate of collecting of furniture from store, if required, and retured back to store after complete repairing is deemed to include in quoted rate.) for following:-

Almirah Large Steel with Shelves (FD-1031)

Almirah Large Steel with shelve (Outside olny) (FD-1031)

Almirah Large Steel 1/2 H 1/2 S (FD-1033)

Almirah Large Steel 1/2 H 1/2 S (outer side only ) (FD-1033)

Almirah Large Steel glass door (FD-104M)

Almirah Large Steel glass door (Outside only)(FD-104M)

Almirah Med Steel with Shelves (FD-1032)

Almirah Med Steel (Outside olny) (FD-1032)

Almirah MAP Steel (FD-1030)

Book shelve open small steel (FD-69M)

Book shelve open Large steel (FD-69M)

Book case steel (FD-1028)

Book case steel (Outside only) (FD-1028)

Copboard steel large with door (JOR/F/02/96)

Copboard steel large with door (Outside Only) (JOR/F/02/96)

Chair cushion seat & back (Godrej PCH-7004)

Chair cushioned with arms (DB-4125)

Chair executive visitor/ Writing steel ( FD/ E6/ MAP/ 12)

Chair tubler steel /CBA Steel with arms (FD-75M)

Form without back (FD-77M/1027)

Form with back (FD-78M)

Locker bed side steel (FD-1029)

Locker bed side steel (outside Only) (FD-1029)

Locker four unit steel (TP)

Locker four unit steel (outside only) (TP)

Ledder for Loft (FD-238)

Rack Adjestable 6 tier steel (FD-1038)

Rack shoe steel (FD/MAP/02)

Stool steel 2' High (305 x 305 x 510 mm )(FD-409)

Table office clerk steel (FD-1004)

Table office officer steel (FD-1003)

Trustle srore room iron (FD-1043)

Teapoy Varandah (FD-255)

Table dining ORs steel (FD-165M)

M/s Sashi Enterprise

M/S N K SAI TRADING

M/S BORAH BROTHERS

M/S P R SINGH AND SONS