REPAIR TO ROADS AND ROAD FURNITURE AT AF STN SITE P SITE R KANHERI HILLS AFS MUMBAI COTTONGREEN SION SANTACRUZ KALINA AND MADH ISLAND AND MAINTENANCE OF HELIPAD FOR LANDING GROUND OF HEPTORS AT SITE P AND R UNDER GE AF THANE

M&L for Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by applying tack coat at 5 kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per Sqm, blinded with 0.09 Cum of stone chipping 6.3 mm size and again well rammed (including supply of premixed macadam binder and chipping ) depth of pot holes exceeding 30mm , complete all as specified and as directed by Engr-in-charge.

M&L for prepration unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface wth gunny bags to remove all loose, dirt etc and applying evenly a priming / tack coat with bituminous primer at 10 Kg per 10Sqm using paving bitumen (VG-10) Compplete all as specified and directed by Engineer in charge.

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc , complete all as specified and as directed by Engr-in-charge.

M&L for Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 Sqm using paving bitumen VG 30 and laying bituminous premixed carpet asphaltic semi dense concrete 30mm thick consolidated thickness with 5.5% binder content by weight of total mix, rolled with 8 to 10 ton power road roller and compacted using mechanical paver to required camber and gradient , complete all as specified and as directed by Engr-in-charge.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming /tack coat with paving bituminous primer VG-10 grade @ 5kg per 10 Sqm , complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and as directed by Engr-in-charge.

S&F in replacement of CAT EYE (Road Stud) size 100mm x 100mm x 20mm made of Poly carbonate moulded body with electronically welded prismatic retrolange on both sides for maximum retro reflection in wet and dry conditionto be fixed with bituminous adhesive BT-69 complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed complete all as specified and directed.

Supply and fixing in replacement of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed complete all as specified and directed.

S&F in replacement of Plastic speed breaker with reflector 500x350x80mm size including anchor fastner and adhessive , complete all as specified and as directed by Engr-in-charge.