JJM 2020-2021- Bodinayakkanr Block - Package No. JJM/BOD-36

Amount

Rasingapuram Panchayat

Construction of infiltration well

Earthwork excavation above water level in light or sandy or clay soils for infiltraton well of 4.50m dia (Internal) including leveling the site and as directed by the departmental officers open well excavation for infiltration well for first depth of 1.00m

Rainforced cement concrete 1:1.5:3 using 20mm Machine crushed HBG Stone jelly excluding cost of reinforcement, centering, shuttering strutting, but including cost of mixing concrete, placing, vibrating with mechanical vibrator, finishing, curing etc. complete as directed by Departmental officers

Sinking of infiltration well of 4.50m internal dia and 5.50m external dia below water level including all incidental charges in light (or) sandy soil.

First depth of 2.0m

Second depth of 2.0m

Third depth of 2.0m

Fourth depth of 2.0m

Fifth depth of 2.0m

Porous concrete in CC 1:4(One cement and four hard broken granite jelly of size 20mm) for steining of infiltration well excluding cost of centerin g but including curing etc, complete and as directed by the Deportment officers.,

Providing steel centering using MS plates of size 90cmx60cm - 13G to 10G thick welded with 25mm x 3mm MS angles supported with country wood scantling of size 10cm x 6.5cm at 50cm C/C strutting with casurina props of 10cm to 13cm dia as directed by Deportment officers.,

For Plane surface

For Curved surface

Supply and delivery of Fabarication and placing in position of RTS Rods for reinforcement for binding ring, pilasters, roof slab and well curb including cost of binding wire and as directed by Deportment officers.,

Plastering in CM 1:4 (one cement and four sand) 12mm thick including curing etc., complete as directed by Departmental officers

Plastering in CM 1:5 (one cement and four sand) 20mm thick including curing etc., complete as directed by Departmental officers

Supply , Delivery and fixing in position 50mm thick RCC (1:1.5:3) manhole cover slab of size :0.60x0.60m with necessary Reinforcement and MS angle of size 50mmx50mmx6mm thick fixed alround the edges of the slab complete and as as directed by Departmental officers ( TWAD SOR other Construction material item No 192)

Supply , Delivery and fixing in CI steps in position at 30cm center to center in staggered manner and as directed by Departmental officers.,( TWAD SOR other Construction material item No 198)

Providing ventilating arragement by fixing in position 160mm OD PVC 6Kse pipe with PVC cowl and as directed by Departmental officers.,

Providing Confirmatory bores to ascertain sand depth and locating well site before commencing the work.

Providing for cutting edge using 12g MS sheets including the cost of fabarication welding and placing in position in the curb including supply of the MS sheet

Colour washing the outside of well plastered surfaces and side of roof slab.

Plugging the bottom of the well with coarse sand of approved sizes and grade as directed by the Departmental officers.,

Construction of 1.00 Lakhs Lit Sump

Earthwork excavation in hard stiff clay,black cotton, hard red earth, shales,murrams, ordinary gravel stoney earthmixed with 50% fair sized boulders etc.,with an initial lead of 10m and lift of 2m. and as directed

For HSC HRE

For SDR

2nd depth of 2m to 3m

Cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials, mixing,placing, ramming, curing, finishing etc., complete and as directed by Departmental Officers.

Reinforced Cement Concrete with M30 Design Mix for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete.and as directed .

Beyond 1.50 m & upto 4.50 m below GL

Up to1.50 m below GL

Up to 4.50 m above GL

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X

For 0.00 to 3.30 M (Plane Surface)

For 0.00 to 3.30 M (Curved Surface)

For 0.00 to 3.30 M (FOR ROUND COLUMN)

For 3.30 M- 4.3 M (Plane Surface)

For 3.30 M TO 4.30M (Curved Surface)

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

Providing and fixing of cut stone (Roughdressed) set in CM 1:3 of size 0.45 X0.45 X 0.15M at site including cost of all materials, labour charges, curing etc., complete and as directed etc., complete

Providing RCC Ventilator of 0.15 m dia using 20mm HBG stone including cost of all materials, centering, shuttering, stutting, reinforcement, placing of concrete, finishing, curing, and fixing in position on the roof slab with mosquito proof net arrangement and etc., complete and as directed

Supply, delivery and fixing of CI manhole frame with cover of following size including cost of all materials , fixing of MS clamps, bolt, and nuts etc., complete and as directed

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Supplying and fixing in position of RCC in side access ladder of following size using 20mm size HBS jelly including cost of all materials, centering, shuttering, strutting, fabrication and placing in position of reinforcement,finishing, curing etc., complete and as directed

Provision for supply and fixing of MS Ladder including painting etc., complete

Pump room

Earthwork excavation for foundation and depositing on bank within an initial lead of 10m and an initial lift of 2m for the following classification of soil including shoring, strutting,bailing out water wherever necessary and all other incidental charges .

In hard stiff clay, stiff block cotton, gravel, stoney earth, shales, murram, and earth mixed with small size boulders and hard gravelly soil.

PCC 1:4:8, using 40mm size HBG stone for foundation including mixing, placing, ramming, curing and finishing etc. complete .

R.R. masonry in CM 1:5 mix for foundation and basement as per specification .

Filling the sides of the foundation and basement with excavated earth (other than sand) in layers not more than 15 cm thick, well rammed watered and consolidated complying with standard specification.

Supplying and filling the basement with sand in layers not more than 15 cm thick well rammed, watered and consolidated etc. complete.

Brick work in CM 1:5 mix using country bricks of size 22cm x 11cm x 7cm for the following works including curing etc., complete .

Upto basement:

Above basement:

RCC 1:1.5:3 mix using 20mm HBG stone for the following works excluding centering, strutting and cost of reinforcement, grills in position including mixing, laying, curing and finishing, fixing fan clamps in RCC works wherever necessary complying with standard srecification.

Centering for sides and soffits for RCC members (plane surface) for the following works including shuttering, strutting to the centering and providing supports etc. complete using M.S. sheets of size 90mm x60mm and BG 10 gauge stiffened with MS angles of size 25mm x25mm x3mm laid over country wood joists of size 10cm x63mm spaced at about 90cm c/c and supported by casurina props of size 10cm to 13cm dia. spacing at 75cm c/c. The centering materials should be supplied by the contractor and centering removal after the specified stripping time of the concrete as per IS 456-1978

Supplying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire in all heights etc. complete complying with standard specification.

Plastering with CM 1:5 ,12mm thick for outside walls complying with standard specification.

Front steps - Top & Front

Inside room

Special ceiling plastering with CM 1:3 mix 10mm thick complying with standard specification .

Flooring with C.C. 1:4:8 mix using 40mm size hard broken stone including mixing, placing, ramming, curing etc., complete in accordance with the specification.and

Floor finishing with ellis pattern flooring 20 mm thick etc., complete in accordance with the specification.

Weathering course with concrete broken brick jelly of 20mm size in pure slaked lime (No sand to be used) over roof slab the proportion of brick jelly to lime being 32:12.5 for required depth of 80mm for giving required slope and thickness to roof as required will beaten with wooden beaters etc., complete complying with standard specification and as directed by the TWAD Board Officers.

Finishing the top of roof (weathering course) with one course of pressed tiles of size 20cm x 20cm x 2cm using CM 1:3 mixed with crude oil 10% by weight of cement painted with same oiled mortar complying with standard specification.

Supply, delivery and fixing in position of MS steel door including all fixtures and appliances complying with standard specification.

Supply, delivery and fixing in position MS windows with 10 mm MS bar horizontally at 15 cm C/c and welded MS shutters and working arrangements including all fixtures and appliances complying with standard specification.

Supply, delivery and fixing in position of MS Ventilator `N' type with 2 Nos of 16 mm MS bar horizontally fixed and glazed shutters including all fixtures and appliances complying with standard specification.

White washing two coats for walls inside with fine screened shell lime complying with standard specification.

Supplying and fixing in position of 110 mm OD PVC rain water pipe from top of roof slab to G.L. with specials etc. complete.

Pipe line

Supply and cost of 75mm dia 6KSC PVC pipe with ISI mark etc complete

Labour for cutting Concrete Roads for laying water mains or sewer.including all cost etc..,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification. SS20B

Laying and jointig of 75mm dia 6ksc PVC Pipe and G.I pipe into the trench with proper grading and alignment and all labour charges etc,,complete

Refilling the Pipe line trench with excavated earth other than sand complying the Standard specification etc,,complete

Supply and delivery and fixing charges of Woltman model with removal mechanism Water meters with filters and with confirming to ISO 4064 Part I,II,III class B specification, production box of size 20cm x 30cm for fixing of water meter, the box should be rectangular base the rate including required fittings for fixing and with all tools & tackles etc., complete

FHTC Connection

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers. - 15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Providing Water Supply arrangements at Maniyampatty Panchayat

Providing New Borewell with Motor and Watr Supply Arrangements from Bore Well to Maniyampatty OHT's

Drilling of 150 mm dia vertical bore well in hard rock area including labour charges for inserting of casing pipe etc

overburden soil

hard rock areas

Supply and delivery of 200mm dia PVC Casing pipes confirming to IS including All charges for Labour etc..,.

Supply and delivery of THREE PHASE 7.5 HP SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD 50 x 250 head 1 unit including cost and conveyance of all materials to site etc…

Supply and delivery of THREE PHASE 7.5 HP PANEL BOARD-STAR DELTA WITH TWO LEVEL GUARD AND AUTO START including cost and conveyance of all materials to site etc…

Supply and Cost Of 6 sq.mm PVC insulated and sheated 3 core flat type copper cable with ISI mark

Supply and Cost Of 50 mm G.I pipe ( Medium ) " C " class Pipe with Standard Specification

Supply and Delivery Of 5 H.P Open Well Pump SET 100MX 60M Head with ISI mark

Supply and Delivery Of 5 H.P Pannel Board With Standard specification

Supply and Cost Of 6 sq.mm PVC insulated and sheated 3 core flat type copper cable with ISI mark

Supply and Cost Of 80 mm G.I pipe (medium) " B" class Pipe with Standard Specification

Supply and Delivery of 110 mm Dia HDPE pipes PE 80 PN 6 with ISI mark as per IS 4984/2016

Supply and Cost Of 100 mm G.I pipe (medium) " B" class Pipe with Standard Specification

Laying and jointing of 110 mm HDPE pipes PE 80 PN 6 in to trench with proper grade and alignment and alignment and required power supply for welding and with all tools & tackles etc., and as complete.

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed For pipe line Trench work

Labour Charge for refilling of pipe line trench with excavated Earth

Labour charges for the erection of (THREE PHASE 7.5 HP SUBMERSIBLE PUMPSET) submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Labour charges for erection and commissioning of 5 HP openwell pumpset and pipes into the well

Supplying and fixing of 50 mm Double Air valve and specials including earthwork excavation and for construction of 230mm brick work masonry chamber (valve pit Outer size 1.20mx1.20mx1.20m) with Precast cover slabs etc., complete. (4193for Air Valve +18000 for Brick Chamber = 22193)

Double Air valveas per IS 14845/2000 ( item No :- 12.20)

Supply and fixing of 6way SP DB 16A DPIC switch of 500 V ( slide lendle) with F & N on suitable TW board with PWD earthing

Pipe line

Supply and cost of 75mm dia 6KSC PVC pipe with ISI mark etc complete

Labour for cutting Concrete Roads for laying water mains or sewer.including all cost etc..,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification. SS20B

Laying and jointig of 75mm dia 6ksc PVC Pipe and G.I pipe into the trench with proper grading and alignment and all labour charges etc,,complete

Refilling the Pipe line trench with excavated earth other than sand complying the Standard specification etc,,complete

Supply and delivery and fixing charges of Woltman model with removal mechanism Water meters with filters and with confirming to ISO 4064 Part I,II,III class B specification, production box of size 20cm x 30cm for fixing of water meter, the box should be rectangular base the rate including required fittings for fixing and with all tools & tackles etc., complete

FHTC Connection

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers. - 15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Construction of 1.00 Lakhs Lit Sump

Earthwork excavation in hard stiff clay,black cotton, hard red earth, shales,murrams, ordinary gravel stoney earthmixed with 50% fair sized boulders etc.,with an initial lead of 10m and lift of 2m. and as directed

For HSC HRE

For SDR

2nd depth of 2m to 3m

Cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials, mixing,placing, ramming, curing, finishing etc., complete and as directed by Departmental Officers.

Reinforced Cement Concrete with M30 Design Mix for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete.and as directed .

Beyond 1.50 m & upto 4.50 m below GL

Up to1.50 m below GL

Up to 4.50 m above GL

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X

For 0.00 to 3.30 M (Plane Surface)

For 0.00 to 3.30 M (Curved Surface)

For 0.00 to 3.30 M (FOR ROUND COLUMN)

For 3.30 M- 4.3 M (Plane Surface)

For 3.30 M TO 4.30M (Curved Surface)

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

Providing and fixing of cut stone (Roughdressed) set in CM 1:3 of size 0.45 X0.45 X 0.15M at site including cost of all materials, labour charges, curing etc., complete and as directed etc., complete

Providing RCC Ventilator of 0.15 m dia using 20mm HBG stone including cost of all materials, centering, shuttering, stutting, reinforcement, placing of concrete, finishing, curing, and fixing in position on the roof slab with mosquito proof net arrangement and etc., complete and as directed

Supply, delivery and fixing of CI manhole frame with cover of following size including cost of all materials , fixing of MS clamps, bolt, and nuts etc., complete and as directed

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Supplying and fixing in position of RCC in side access ladder of following size using 20mm size HBS jelly including cost of all materials, centering, shuttering, strutting, fabrication and placing in position of reinforcement,finishing, curing etc., complete and as directed

Provision for supply and fixing of MS Ladder including painting etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

KMC Associates, Theni