Drilling of borewell at SWM Site Shirahatti

Drilling of borewell at SWM Site Shirahatti

Geophysical investigation at site for sinking borewells for supplying

drinking water to the habitation either through the Hand Pump MWS or

P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of

capacity 250 PSIG & above 900 CMF and above, in all strata of earth,

including over burden upto 20M, fixing of casing pipes, col...

50Mtrs to 100Mtrs (PWD SR 2023-24 vol-5 item no-12.2.2 page no 139)

100Mtrs to 150Mtrs (PWD SR 2023-24 vol-5 item no-12.2.3 page no 139)

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982

with all latest amendments if any for any dia. The thickness of plate

used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part-

II) 1982 with all latest amendments if any for any dia. The thickness of

plate used for covering one end shall be 3mm (minimum...

Supply and delivery at site of brand new best make pressure gauge bourdon

type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 63 mm (PWD SR 2023-24 vol-5 item no-13.23.1 page n...

Supply and delivery at site of brand new best make gate valve as per IS

778/1984 with ISI Mark and as per its latest amendments Size 50 mm (PWD SR 2023-24 vol-5 item no-13.24 page no 154)

Supply and delivery at site of brand new best make non-return valve as

per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm (PWD SR 2023-24 vol-5 item no-13.25.1 page no 154)

Submersible cables - PVC 1x3x4 Sqm (PWD SR 2023-24 vol-5 item no-13.22.3 page no 154)

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990

with latest amendments complete with GI fittings (excluding the cost

of fittings) with cuts and threads wherever necessary, includin...

Providing wrought mild steel (galvanized) GI collar confirming to IS

1239-II, 1991 with latest amendments if any.50 mm dia GI collar (PWD SR 2023-24 vol-5 item no-11.3.6 page no 128)

Providing Submersible Pump Set of 150mm dia suitable for bore well and

confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt

Motor as per specifications, to work site as per necessary am...

Labour charges for Erection, Electrification and commissioning of Pump

sets, including aligning and balancing of all items including supply and

erection of two pair of supporting clamps, bore well cap...

Supply, installing,testing and commissioning COMMON control panel

consisting of the following INCOMING:1 No set of Phase indicating

lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog