Estimate Of Concrete Lining of Sodhiwala Disty From RD 0-9700 Including Construction of V.R.Bridge At RD 5600

Amount

Excavation in soil using J.C.B and Hydraulic Tractor trolley with disposal with an avg. lead 5.1 km and last including cutting and loading in trolley, trimming bottom and side slopes in accordance with requirement of grades and X-Sections and Transporting to the embankment locations with all lift and leads (CSR item no. 19.38)

a) Disposal/Carriage from 0 upto 450 mtr

b) Disposal/Carriage from 450 upto 1 Km

c) Disposal/Carriage for every additional KM upto 3 Km

E/work in excavation in foundation/ trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 mtr depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation. (For Sleepers and Copping) (CSR item no. 6.6)

Excavation in soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirement of lines, grades and cross sections, including all lifts and combined lead up to 30m. (CSR item no. 6.19)

Extra for compaction of earth including laying earth in 20cm layers, watering and rolling to specifications. (CSR item no. 24.5 b (i+ii+iii))

E/work for lip cutting for lining of irrigation Channels inclusive of all allowances, lead and dressing (CSR 19.19)

a) Depth upto 1.5 mtr

b) Depth Exceeding 1.5 mtr but up to 3.00 mtr depth

Dressing of side slopes and preparation of sub grade for lining complete in all respect as per PWD specifications and engineer-in-charge. (CSR item no. 19.2)

Centering & shuttering for faces of walls, partitions, retaining walls & the like (vertical or bartening including pillastering, buttresses etc. when curved) (CSR item no. 9.3)

Cement water slurry 1:3 with cement @ 2.25 kg per Sqmt as on prepared side slopes before laying concrete on side slopes including supply and carriage & loading unloading of all materials complete in all respect as per PWD specifications and engineer-in-charge. (CSR item no. 19.12)

Cement concrete lining 75mm thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic to the site in transit computerized transported mixers with an average lead of 1 Km (FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) Without mechanical concrete paver

Providing and laying cement concrete (M-15) for coping & Sleepers mixed in automatic computerized batching and mixing plant and transported to the site in transit mixers including supply and carriage & loading unloading of all materials complete in all respect as per PWD specifications and engineer-in-charge.

Extra bitumen painting at 0.69 kg per sqm. Priming coat as per IS 3384-1985 for construction & expansion joints including supply and carriage & loading unloading of all material complete in all respect as per PWD specifications and engineer-in-charge.(CSR item 13.54)

Laying LDPE film of 150 microm over sleepers for construction & expansion joints including supply and carriage & loading unloading of all material complete in all respect as per PWD specifications and engineer-in-charge. (CSR item no. 3/M-73)

Filling Construction/Contraction joints with special impervious hot pour as per technical Specification (CSR item 19.16)

Dressing of earthwork for new work or remodeling work Unit CSR 6.3 (i)

Ordinary Jungle Clearance of both banks running Minor having Discharge up to 1.5 Cum/s [CSR item no. 26.24-a]

Earth work involved in dismantling Open flume, A.P.M. or O.S.M. type Outlets (including excavation, refilling , consolidation and dressing ) With 'H' upto 0.5 m. CSR ITEM NO. 20.01 B (i)

Earth work involved in dismantling gullet walls of outlets for adjusting 'Y' of A.P.M. or 'B' of open flume outlets With 'H' upto 0.5 m. CSR ITEM NO. 20.01 c (i)

Extra labour for dressing of bricks on Open Flume and APM type outlet With 'H' upto 0.5 m. CSR ITEM NO. 20.10 (i)

Adjusting A.P.M. to the correct 'Y' and fixing in position, Extra over item No. 20.4 In case of old outlets where dismantling and reconstructing of gullet walls is involved including change in width of gullet i.e. 'B' of the outlet upto 30m.m. CSR ITEM NO. 20.04 C With 'H' upto 0.5 m. CSR ITEM NO. 20.03 c (i)

Cement Conc 1:3:6 mechanically mixed with stone ballast or shingle using concrete mixer volumetric type

1st Class burnt Brick work laid in csm1:3 in foundation & Plinth

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade as per IS 1786-1985 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixture as per IS 1791 and vibrator by needele vibrator but excluding steel reinforcement and centring-shuttering complete in all respect. CSR item 10.15

Providing APM cast iron block complete in all respects including supply of pig iron, casting and pattern making, as per ISI specifications no. 7986-1976 for Patrolling and Non Patrolling Bank (0.40 ft= 12.2 cm (min wt 76 kg) ) (CSR Item NO. 20.15 (iv)

Centring and shuttering for slab(CSR Item No. 9.11)

Laying cement concrete 1:3 :6 (M-10) with stone ballast or shingle I/c supply and carriage of material at site of work complete in all respect

Laying R.C.C. 1:2 :4 (M-15) excluding steel reinforcement but including centering and shuttering and vibrating the concrete (precast concrete )

Bending binding and placing in position steel reinforcement

Dismantling of Old Bridge (RCC Main Slab) (CSR item no. 8.6-e)

Dismantling brick work, tile masonry or tile lining (in cement mortar). (CSR item no. 8.5-b)

Earth work in Excavation in of foundation of structure as per drawing and technical specification , including setting out, construction of shoring and bracing , removal of stumps and other deleterious matter dressing of sides and bottom and backfilling with excavated surplus soil. In ordinary soil( CSR 21.1 (B) Mechanical Means

DEPTH UP TO 3 MTR

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (PCC Grade M15) CSR Item No. 21.32(a)

Plain/ Reinforced cement concrete RCC M-30 in sub-structure complete as per drawing Technical specifications height upto 5 mtr using batching plant,Transit Mixer & Concrete Pump including centering and shuttering. (CSR Item No. 21.32-G/a/ii)

Plain/ Reinforced cement concrete RCC M-25 in sub-structure complete as per drawing Technical specifications height upto 5 mtr using batching plant, Transit Mixer & Concrete Pump including centering and shuttering. (CSR Item No. 21.32-F/a/ii)

Furnishing and placing reinforcement / prestressed cement concrete RCC M-30 in super-structure complete as per drawing Technical specifications height upto 5 mtr using batching plant, Transit Mixer & Concrete pump for solid slab including centering and shuttering. (CSR Item No. 22.1-C/a/ii)

Furnishing and placing reinforcement / prestressed cement concrete RCC M-40 in super-structure complete as per drawing Technical specifications height upto 5 mtr using batching plant, Transit Mixer & concrete pump for railing including centering and shuttering. (CSR Item No. 22.1-E/a/ii)

Suppling fitting & placing uncoated HYSD bar reinforcement in foundation complete in drawing and technical specification

Providing and fixing 160 mm dia PVC pipe for service duct single socketed (working pressure 4 kgf / cm²) (CSR item no. 13.74-ii)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR item no: 16.17 )

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface (CSR item No. 16.31 )

Providing weep holes in Brick masonary/plain /reinforced concrete abutment wing wall/return wall with 100 mm dia PVC pipe, Extending through the full width of the structure with slope of IV:20H towards drawing and technical specification (CSR item no:21.35)

Providing and filling expansion joint with special impervious hot pour 20 mm wide and 375 mm deep

Drainage Spouts complete as per drawing no. SD/205 and Technical specification with 0.6 meter long GI 100 mm dia discharge GI light grade pipe (for Bridges) (CSR Item no. 22.8-B)

R.C.C M30 in open Foundation complete as per drawing and specifications. (C.S.R 21.7 G ii)

Cautionary sign board 900x900x900mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 as per clause 6.9 of IRC 67-2012 for retro reflective sheeting

Informatory sign board 800 x 600 mm square as per IRC 67 - 2001 with retro reflective high intensity microprismatic gradecomplete as per technical clause 801 MORT&H specifications.

Advance Direction sign board 1200x1200mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per clause 6.9 of IRC 67-2012 for retro reflective sheeting &a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .

Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade as per clause 801 of MORT&H specifications

Any Other Item

GURJIT SINGH CONTRACTOR