Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.0 LAccepted-AOC | L1 | Accepted-AOC Quoted rates of lowest bidder found reasonable hence accepted | |
| 2 | L2₹13.2 L+₹17,694.29 (1.36%)Rejected-AOC | L2 | Rejected-AOC Quoted rates are high hence rejected | |
| 3 | L3₹13.4 L+₹40,998.85 (3.15%)Rejected-AOC | L3 | Rejected-AOC Quoted rates are high hence rejected | |
| 4 | L4₹13.8 L+₹81,421.35 (6.25%)Rejected-AOC | L4 | Rejected-AOC Quoted rates are high hence rejected | |
| 5 | L5₹14.1 L+₹1.0 L (7.96%)Rejected-AOC | L5 | Rejected-AOC Quoted rates are high hence rejected |
Tender Value
₹13.4 L
EMD Value
₹26,760
Closing Date
6 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mr GURUDAS GOLDAR, AE (CIV)
AGE (I) TAWANG Pin- 900198 C/o 99 APO
REPAIR/ MAINT OF FURNITURE (WOODEN AND STEEL) UNDER AGE (I) TAWANG
2023_MES_617841_1
8598/AGE(I)/TWG OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Tawang
REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
AGE (I) TAWANG
₹26,760
13 Dec 2023
8 Sept 2023
13 Oct 2023
8 Sept 2023
6 Oct 2023
22 Sept 2023
8 Sept 2023 - 15 Sept 2023
Amount
CHAIR DINING (FD-16, AND 279) Taking down old unsv front leg from chair dining. Supply and fix new front leg made out of 1st class hard wood (Teak)well seasoned timber free from cracks, knots, holes etc. Replaced leg shall be including applying one coat of French polish over wood filler complete all as specified . Rest all as specified and shown on drg and as directed
All as per item ser No 1.01 above but rear leg.
All as per item ser No 1.01 above but front Rail
All as per item ser No 1.01 above but side rail
All as per item ser No 1.01 above but rear rail
All as per item ser No 1.01 above but stiffener
Taking out and removing all unserviceable worn out plastic cane from seat of chair dining and re-canning the same with new white plastic cane of 2mm wide half round (oval type) for weaving and 4mm wide for bordering as per existing pattern complete all as specified and as directed and as shown on drawing.
M&L for polishing with one coat of french polish best quality on all exposed wooden portion of Chair Dinning , Chair Dinning shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
CHAIR WRITING (FD-20, 230 & FD-280) Taking down old broken/unsv front leg from chair writing and S & F new front leg made out of 1st class hard wood (Teak) well seasoned timber free from cracks, knots, holes etc . Replaced leg shall be finish with applying one coat of French polish over wood filler complete all as specified . Rest all as specified and shown on drg and as directed.
All as per item ser No 2.01 above but rear leg
All as per item ser No 2.01 above but front rail.
All as per item ser No 2.01 above but side rail.
All as per item ser No 2.01 above but rear rail.
All as per item ser No 2.01 above but stiffener.
All as per item ser No 2.01 above but arm rest.
Taking out and removing all unserviceable worn out plastic cane from seat of chair writing and re-canning the same with new white plastic cane of 2mm wide half round (oval type) for weaving and 4mm wide for bordering as per existing pattern complete all as specified and as directed and as shown on drawing.
M&L for polishing with one coat of french polish best quality on all exposed wooden portion of Chair writing , Chair writing shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
CHAIR EASY (FD-17, FD-229) Taking out broken/unsv front leg from chair easy and S & F new front leg made out of 1st class hard wood (Teak) well seasoned timber free from cracks, knots, holes etc . Replaced leg shall be finish with applying one coat of French polish over wood filler complete all as specified to match with the existing surface of chair. Rest all as specified and shown on drg and as directed.
All as per item ser No 3.01 above but rear leg.
All as per item ser No 3.01 above but front leg.
Taking out and removing all unserviceable worn out plastic cane from seat of chair easy and re-canning the same with new white plastic cane of 2mm wide half round (oval type) for weaving and 4mm wide for bordering as per existing pattern complete all as specified and as directed and as shown on drawing.
M&L for polishing with one coat of french polish best quality on all exposed wooden portion of Chair Easy , Chair Easy shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
CHAIR WOODEN BOTTOM (FD-56(M) FD-225 & FD-285) Taking down old unsv seat of chair wooden bottom and S & F new seat made out of commercial ply wood 6mm thick BWR ISI mark of size 445mmx430mmx6mm thick. Replaced seat shall be finished with one coat of french polish to match with the exising surface of chair. Rest all as specified and shown on drg and as directed.
M&L for polishing with one coat of french polish best quality on all exposed wooden portion of Chair wooden Bottom , Chair wooden bottom shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
S & F new PVC/hard rubber shoe with screws as approved to any type of chair above complete all as specified and as directed.
TABLE WRITING (FD-33(M), FD-249 & FD-275) Taking down old unsv door shutter of table writing and S & F new door shutter made out of prelaminated particle board 18mm thick with one side teak face and other side balancing white of size 395mmx570mm incl one Nos of brass knob and two Nos hinges 50mm. All edges of door shutter will be covered with 4mm thick teak wood beading duly finished with french polish superior quality. Rest all as specified and shown on drg and as directed .Make of particle board : BHUTAN/CENTURY/GREENPLY/ARCHIDPLY.
Taking down old unsv top of table writing and S & F new table top of size 1145mmx600mm made out of 18mm thick prelaminated particle board one side teak face and other side balancing white covered with 4mm thick 1st class hard wood beading all around top duly finished with french polish superior quality.Make of board : BHUTAN/CENTURY/GREENPLY/ARCHIDPLY. Rest all as specified and shown on drg and as directed.
Taking down old unsv drawer from table writing and S&F new drawer made out of 1st class hard wood (Teak)well seasoned timber free from cracks, knots, holes etc. Bottom of drawer to be made out of 6mm thick commercial plywood BWR (ISI marked) of size 540mmx355mm and front planks of drawer of size 405mmx120mm to be made out of 18mm thick veneered particle board with one side teak face alongwith 4mm thick 2nd class hard wood beading all round including one No. brass knob and finish with french polish superior quality. Rest all as specified and shown on drg and as directed . Make of Ply board : BHUTAN/CENTURY/GREENPLY/ARCHIDPLY.
Taking down old unsv legs from table writing and S & F new legs made out of 1st class hard wood (Teak)well seasoned timber free from cracks, knots, holes etc duly finished with french polish superior quality. Rest all as specified and shown on drg and as directed.
M&L for polishing with one coats of french polish best quality on all exposed wooden portion of Table writing, The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
HAT STAND WITH MIRROR (FD-23(M), & FD-233) Taking down old unsv board of Hat stand with mirror and S & F of new board of size 1000x710 mm made out 18 mm thick prelaminated particle board one side teak face and other side balancing white with edges duly covered with 4 mm thick second class hard wood beading duly finish/polish of all around. Rest all as specified and shown on drg and as directed .(Make of Board : BHUTAN/CENTURY/GREENPLY/ARCHIDPLY).
Taking down of old unsv aluminium pegs from Hat stand with mirror and S & F new alluminium pegs 75mm of superior quality. Rest all as specified and shown on drg and as directed.
Taking down old unsv mirror from Hat stand with mirror and S & F new mirror of size 300mmx460mm 5.5mm thick make of mirror Modi Guard/Atul. Rest all as specified and shown on drg abd as directed .
M&L for polishing with one coats of french polish best quality on all exposed wooden portion of Hat Stand with mirror. The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
BED OF BUNKS (FD/BR/315) Removing old unsv planks from bed of bunks and supply & fixing 12mm thick plywood of size 6' X3'X 12mm (Make : BHUTAN/CENTURY/GREENPLY/ARCHIDPLY) plywood shall be fitted with nuts & bolts of size 6mm x 40mm long to frame of bed of bunks.. Rest all as specified on drg and as directed.
Removing old unsv stiffner of flat iron and provide stiffner of flat iron 40x4mm thick of appropriate length duly welded all as specified on drg and as directed.
Taking out existing worn out nut & bolts from the frame of bed of bunks and supply and fixing of new nut & bolts of size 6mm x 40mm long in the frame of bed of bunks. Rest all as specified on drg and as directed.
M& L for two coats of syntehetic enamel black paint to the frame of bed of bunks.
CHAIR ALL TYPES Taking out and removing all unserviceable worn out plastic cane from seat/back of chairs, stools, bin soiled linen etc. not specifically considered in forgoing items and re-canning the same with new white plastic cane of 2mm wide half round (oval type) for weaving and 4mm wide for bordering as per existing pattern complete all as specified and as directed.
TABLE 900mm x600mmx760mm WITHOUT DRAWER (FD-42 & 55 FD-223) Taking down old unsv top of table 900mmx600mmx760mm without drawer and S & F new table top of size 900mm X 600mm made out of 18mm thick prelaminated particle board one side teak face and other side balancing white covered with 4mm thick 1st class hard wood beading all around of the top duly finished with french polish superior quality to match the existing portion of the table without drawer . Make of board : BHUTAN/CENTURY/GREENPLY/ARCHIDPLY. Rest all as specified and shown on drg ans as directed.
M&L for polishing with two coats of french polish best quality on all exposed wooden portion of Table 900 mm x 600 mm x 760 mm w/o drawer, The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
TABLE 900mm x600mmx760mm WITH DRAWER (FD-41 & FD-224) Taking down old unsv leg from table 900mmx600mmx760mm with drawer and S & F new leg of size 740mmx65mmx65mm made out of 1st class hard wood well seasoned timber free from crack, knot etc. Replaced leg shall be finishd with french polish to match the existing portion of the table 900mmx600mmx760mm with drawer. Rest all as specified and shown on drg and as directed.
Taking down old unsv front rail from table 900mmx600mmx760mm with drawer and S & F new front rail of size 740mmx65mmx25mm made out of 1st class hard wood well seasoned free from crack, knot, holes etc including applying one coat frech polish to match the existing portion of the table 900x600x760mm with drawer. Rest as specified on drg and as directed.
Taking down old unsv side rail from table 900mmx600mmx760mm with drawer and S & F new side rail of size 440mmx65mmx25mm made out of 1st class hard wood well seasoned timber free from crack, knot etc. Replaced front rail shall be finishd with french polish to match the existing portion of the table 900mmx600mmx760mm with drawer. Rest all as specified and shown on drg and as directed.
Taking down old unsv top of table 900mmx600mmx760mm with drawer and S & F new table top of size 900mmx600x760mm made out of 18mm thick prelaminated particle board one side teak face and other side balancing white covered with 4mm thick 1st class hard wood beading all around of the top duly finished with french polish superior quality to match the existing portion of table 900x60-0x760mm with drawer. Make of board : CENTURY/GREENPLY/ARCHIDPLY/BHUTAN BOARD. Rest all as specified and shown on drg and as directed
M&L for polishing with two coats of french polish best quality on all exposed wooden portion of Table 900 mm x 600 mm x 760 mm with drawer, The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
TABLE CENTRE (FD-29(M), FD- 235, FD-274 & FD-284) Taking down old unsv leg from Table centre. S & F new leg of size 45mmx45mm at top, 25mmx25mm at bottom x380mm long made out of 1st class hard wood well seasoned timber free from knot, crack, hole etc duly finished with french polish superior quality. Rest all as specified and shown on drg and as directed.
Taking down old unsv top of table centre. S & F new top of table centre of size 900mmX450mm made out of 18mm thick prelaminated particle board one side teak face and other side balancing white covered with 4mm thick 1st class hard wood beading all around of the top duly finished with french polish superior quality. Make of board : CENTURY/GREENPLY/ARCHIDPLY/BHUTAN BOARD. Rest all as specified and shown on drg and as directed .
M&L for polishing with one coat of french polish best quality on all exposed wooden portion of Table Centre, The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
TEAPOY WOODEN (FD-34(M), FD-232 & FD-278) Taking down old unserviceable top from teapoy wooden and supply & fix new top of size 600x450mm made out of 18mm thick perlaminated particle board one side teak face covered with 4mm thick 1st class hard wood beading all round of the top duly polished with french polish superior quality complete all as specified and directed .
M&L for polishing with two coats of french polish best quality on all exposed wooden portion of Teapoy wooden, The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
TABLE DINING FOR 6 PERS (FD 30 ,FD-273) Taking down old unsv top of table dining 6 pers and S & F new top of table dining 6 pers of size 5'x3' made out of 18mm thick prelaminated particle board one side teak face covered with 4mm thick 1st class hard wood beading all around of the top duly finished with french polish superior quality. Make of board : CENTURY/GREENPLY/ARCHIDPLY/BHUTAN BOARD. Rest all as specified and shown on drg and as directed .
S&F First Class Hardwood (seasoned Timber) LONG RAIL, polishing the new surfaces with french polish to match the existing adoining surfaces of TABLE DINING 6 PERSONS as shown on Drawing No. FD-273 & FD-30 including taking out unserviceable Long Rail, complete all as specified and as directed.
S&F First Class Hardwood (seasoned Timber) SHORT RAIL, polishing the new surfaces with french polish to match the existing adoining surfaces of TABLE DINING 6 PERSONS as shown on Drawing No. FD-273 & FD-30 including taking out unserviceable Short Rail, complete all as specified and as directed.
S&F First Class Hardwood (seasoned Timber) LEG, polishing the new surfaces with french polish to match the existing adoining surfaces of TABLE DINING 6 PERSONS as shown on Drawing No. FD-273 & FD-30 including taking out unserviceable Leg, complete all as specified and as directed.
M&L for polishing with one coat of french polish best quality on all exposed wooden portion of TABLE DINING 6 PERSONS, The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
PEG TABLE (FD-25, 236 & FD- 277) Taking down old unsv top of peg table and S & F new top of peg table of size 450x300 mm made out of 18mm thick prelaminated particle board one side teak face covered with 4mm thick 1st class hard wood beading all around of the top duly finished with french polish superior quality. Make of board : BHUTAN/CENTURY/GREENPLY/ARCHIDPLY. Rest all as specified and shown on drg and as directed.
S&F first Class Hardwood (seasoned Timber) LONG RAIL, polishing the new surfaces with french polish to match the existing adoining surfaces of PEG TABLE as shown on Drawing No. FD-248 & FD-277 including taking out unserviceable Long Rail, complete all as specified and as directed.
S&F first Class Hardwood (seasoned Timber) SHORT RAIL, polishing the new surfaces with french polish to match the existing adoining surfaces of PEG TABLE as shown on Drawing No. FD-248 & FD-277 including taking out unserviceable Short Rail, complete all as specified and as directed.
S&F first Class Hardwood (seasoned Timber) LEG, polishing the new surfaces with french polish to match the existing adoining surfaces of PEG TABLE as shown on Drawing No. FD-248 & FD-277 including taking out unserviceable Leg, complete all as specified and as directed.
M&L for polishing with two coats of french polish best quality on all exposed wooden portion of Peg Table, The item shall be cleaned with emery paper properly before applying the french polish. Rest all as specified and shown on drg.
BED HARD/BED PLYWOOD TOP (FD-213 and 246) Removing of old U/S plywood from bed hard and Supply & fix 12mm thick plywood commercial type, BWR ISI marked duly polished with french polish superior quality, plywood top for the bed hard and bed plywood top including tightening of loose frame wherever required. Rest all as specified in drg and as directed.
Removing of old U/S long rail from bed hard/plytop and Suply & fix long rails of 1st class hard wood of size 90x35x1920mm long to bed hard/bed plytop in replacement of existing unserviceable long rail duly polished with one or more coats with french polish superior quality. Rest as specified in drg and as directed.
M&L preparing old Wooden Surfaces of BED PLYWOOD TOP /BED HARD (Drawing No. FD-213, FD-246 ) and applying French Polish (approved quality) to glossy finish complete all as specified and as directed.
TEAPOY VARANDAH (FD-35 & 255) Removing old unserviceable top of teapoy varandah and & fixing new top made out of 18mm thick prelaminated particle board exterior grade one side teak face and other side white balancing of size 900 x 450mm and all as specified and shown on drg and as directed.
TABLE BEDSIDE (FD- 28, 276) Removing old unserviceable plywood from back of table bedsidee wooden and supply & fixing new plywood of 3mm thick of size 460 x 230mm (Make : BHUTAN/ CENTURY/ GREENPLY/ ARCHIDPLY) duly polished with two coats of french polish. Rest all as specified and shown on drg and and as directed.
Removing of old unsv leg of table bedside and supply & fixing of news leg of size 40x40mm at top and 25x25mm at bottom duly polished with two coats of french polish. Rest all as specified and shown on drg and and as directed.
S&F TOP of TABLE BED SIDE made out of Prelaminated Particle Board 18/19 mm thick, exterior grade ISI marked, one side taek face, providing Teak Wood Beading 4.0 mm thick all round and french polishing the beading to match with adjoining surfaces and as shown on Drawing No. FD-248 & FD-276 including taking out unserviceable Top, complete all as specified and as directed.
CHAIR VERANDAH (FD-19 & FD-256) M&L painting to Chair Verandah with two coats of synthetic enamel paint (Ist grade quality) over a coat of red oxide primer by spray machine after preparation of old painted steel and iron surfaces by removing /scrapping with emery paper and providing hard rubber shoes white colour complete as specified shown on drawing and as directed.
Removing of old unsv plastic cane from chair verandah and recaning to seat & back by 4mm wide half round oval shape plastic cane including fixing 4 Nos hard rubber shoe to be provided on the legs of chair verandah. Rest all as specified and shown on drg and as directed by Engr-in-Charge .
M & L for running welding on joints/broken frame of each chair Verandah. Rest all as shown on drg.
CHAIR CB STEEL WITH OUT ARMS (FD- 75(M ) M&L SEAT FRAME made out of first Class Hardwood of CHAIR CB STEEL , fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.
M&L BACK FRAME made out of first Class Hardwood of CHAIR CB STEEL , fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.
M&L for mild steel flat iron of size 20 mm x 5 mm thick welded at bottom of seat / back of Chair CB Steel where ever required complete all as specified and as directed.
M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CB STEEL WITHOUT ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying one coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
CHAIR CB STEEL WITH ARMS (FD- 75(M) All as per item No 19.01 above but for Chair CB Steel with arms .
All as per item No 19.02 above but for Chair CB Steel with arms .
All as per item No 19.03 above but for Chair CB Steel with arms .
All as per item No 19.04 above but for Chair CB Steel with arms .
TABLE STEEL (900 x 600 X 760 ) MM WITHOUT DRAWER (FD-1007) M&L denting existing old painted surfaces and making the surfaces smooth (Inside and outside) by rubbing with emery paper after filling putty and spot welding where required and applying with two coats of Olive green paint 1st grade quality over a coat of red oxide primer by spray machine and necessary repairs to legs , stiffners and providing hard rubber shoes for legs complete as specified and shown on drawing and as directed.
Removing of old unsv top from table steel 900mmx600mm supply and fix new table top of size 900x600mm made out of 18mm thick prelaminted particle board one side teak face covered with 4mm thick 2nd class hard wood beading all round of the top duly finished with french poilish superior quality . Rest all as shown on drg and as directed by Engr-in-Charge.
Materials and labour for running welding on broken joints of each table steel of 900mmx600mmx760mm. Rest all as shown on drg and as directed by Engr-in-Charge.
SOFA SET (FD-281/FD-18) M&L FOAM CUSHION SEAT or BACK of size 21"x22"x4" thick 32 density MAKE : KURLON/SLEEPWELL covered with Tapestry Cloth superior quality duly stitched with fine standard thread and providing best quality Chain with Runner on One Side as approvd by GE, suitable for SEAT/BACK of SOFA SET as shown on Drawing No. FD-281 complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 4000.00 per RM.
M&L preparing old Wooden Surfaces of SOFA ONE SEAT (SMALL) (Drawing No. FD-281) and applying Two Coats of French Polish (approved quality) complete all as specified and as directed.
M&L preparing old Wooden Surfaces of SOFA THREE SEAT (LARGE) (Drawing No. FD-281) and applying Two Coats of French Polish (approved quality) complete all as specified and as directed.
TABLE OFFICE CLK STEEL (FD-84 M) M&L denting existing old painted surfaces and making the surfaces smooth (Inside and outside) by rubbing with emery paper after filling putty and spot welding where required and applying with two coats of Olive green paint 1st grade quality over a coat of red oxide primer by spray machine and necessary repairs to legs , stiffners and providing hard rubber shoes for legs complete as specified and shown on drawing and as directed.
Removing of old unsv top from table office CLK steel 1200mmx600mm supply and fix new table top of size 1200x600mm made out of 18mm thick prelaminted particle board one side teak face covered with 4mm thick teak wood beading all round of the top duly finished with french poilish superior quality . Rest all as shown on drg and as directed by Engr-in-Charge.
Taking down old unsv legs of table office clk steel. S & F new legs made out of 25mm thick square tube with 1.60mm wall thickness of 760mm long duly finished with one coat 1st quality synthetic enamel paint olive green over a one coat of red oxide primer. Rest all as shown on drg.
Taking down old unsv drawers from table office clk steel . S & F new drawers made out of 1.00 mm thick MS plain black sheet duly finished with one coat 1st quality paint olive green over a one coat of red oxide primer. Rest all as shown on drg and as directed by Engr-in-Charge .
M&L LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed.
ALMIRAH LARGE STEEL (FD-05 , FD-1031) M&L denting existing old painting surfaces and making the surfaces smooth (Inside and outside ) by rubbing with emery paper after filling with cavities with putty and spot welding where required including shelves and applying one coat of olive green paint (Ist grade quality by using spray machine to Almirah steel large complete as specified and directed.
Taking out unsv locks & keys from Almirah steel large steel and S&F new six lever lock with duplicate keys. All as specified and shown on drg and asa directed by Engr-in-Charge.
Taking out UNSV handle from almirahs and S&F new chronium plated handle with brass bush incl nut and washer etc. (complete fitting) to almirah steel large/med. Rest as specified and shown on drg and as directed by Engr-in-Charge.
Taking over UNSV steel hings from Almirah and S&F new mild steel hings 65mm by welding in almirah steel large/med. Rest as specified on drg and as directed by Engr-in-Charge.
Taking out unsv locking device from almirah large steel and S&F three way locking device . Rest as specified and shown on drg and as directed by Engr-in-Charge.
Taking out UNSV door from almirah and S&F new DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Door, complete all as specified and as directed.
Taking out UNSV leg from almirah and S&F new leg of almirah steel large steel made out of 1mm thick MS sheet. Rest all as specified and shown on drg and as directed by Engr-in-Charge.
M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.
ALMIRAH MED STEEL (FD-243 , FD-1032) M&L denting existing old painting surfaces and making the surfaces smooth (Inside and outside) by rubbing with emery paper after filling with cavities with putty and spot welding where required including shelves and applying one coat of olive green paint (Ist grade quality by using spray machine to Almirah steel large complete as specified and directed.
Taking out unsv locks & keys from Almirah steel Med steel and S&F new six lever lock with duplicate keys. All as specified and shown on drg and asa directed by Engr-in-Charge.
Taking out UNSV handle from almirahs and S&F new chronium plated handle with brass bush incl nut and washer etc. (complete fitting) to almirah steel med. Rest as specified and shown on drg and as directed by Engr-in-Charge.
Taking over UNSV steel hings from Almirah and S&F new mild steel hings 65mm by welding in almirah steel med. Rest as specified on drg and as directed by Engr-in-Charge.
Taking out unsv locking device from almirah med steel and S&F three way locking device. Rest as specified and shown on drg and as directed by Engr-in-Charge.
Taking out UNSV door from almirah and S&F new DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH MED STEEL and made to shape and size as shown on Drawing including taking out unserviceable Door, complete all as specified and as directed.
Taking out UNSV legs from almirah and S&F new legs of almirah steel med steel made out of 1mm thick MS sheet. Rest all as specified and shown on drg and as directed by Engr-in-Charge.
M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.
Running welding on joints. i.e. (1" to 1.5") Clits for shelves of each almirah steel med/large steel. Rest all as specified on drg and as directed by Engr-in-Charge.
TABLE OFFICE OFFICER STEEL (FD-84 M) Taking down old unsv top and S & F new table top of size 1370x760mm made out of 18mm thick prelaminated particle board one side teak face covered with 4mm thick teak wood beading all round of the top duly polished. Rest all as specified in drg and as directed by Engr-in-Charge.
M&L denting existing old painted surfaces and making the surfaces smooth (Inside and outside) by rubbing with emery paper after filling putty and spot welding where required and applying with two coats of paint 1st grade quality match to colour of table over a coat of red oxide primer by spray machine and necessary repairs to drawers legs , stiffners and providing hard rubber shoes for legs complete as specified and shown on drawing and as directed.
Taking down old unsv drawer from table office officer steel. S & F new drawer made out of 1mm thick MS black sheet duly finished with one coat synthetic enamel paint 1st quality over a one coat of red oxide primer to match the colour of table. Rest all as specified and shown on drg and as directed by Engr-in-charge.
Materials and labour for running welding on broken joints/frame of each table office officer steel . Rest all as shown on drg and as directed by Engr-in-Charge.
M&L LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed.
TABLE DINING ORs STEEL (FD-165 M) M&L Repair and replacement of TOP of by providing particle board 18 mm thick exterior grade BWP type ISI marked duly covered with Aluminium sheet of 22 gauge after removing old unserviceable top fixed with panel pin of 20 mm long and screw of size 40 mm long for fixing top and painting to steel frame with synthetic enamel paint 1st grade quality after removing /scrapping with emery paper to old painted complete and steel frame to be welded where necessary as specified on drg and directed.
M & L for running welding on joints/broken frame of each Table dining OR . Rest all as shown on drg and as directed.
M&L Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
SIDE RACK WITH TRAY STEEL 4 SPACES (FD-97 M ) M&L denting existing old painting surfaces and making the surfaces smooth (Inside and outside ) by rubbing with emery paper after filling with cavities with putty and spot welding where required including shelves and applying one coat of olive green paint (Ist grade quality by using spray machine to side rack with tray steel.complete as specified and directed.
FORM WITH OUT BACK (FD - 77 M , 78 M) M&L denting existing old painting steel surfaces and making the surfaces smooth by rubbing with emery paper after filling with cavities with putty and spot welding where required and applying one coat of black paint (Ist grade quality by using spray machine to steel surfaces complete as specified and directed.
Taking down old unsv plank and S & F new second class hard wooden plank duly fixed with nuts, screw and washers. Rest all as specified in drg and as directed by Engr-in-Charge.
CHARPOY GI PIPE WITH FMN SET FD-220 Removing of old unserviceable plywood top and supply & fixing 12mm thick plywood BWR exterior gde of the Charpoy GI Pipe and fixing same position with nuts, washer and bolts of size 6x75mm round head bolts in each holes of the long & short rails all as directed including tightening of loose frame/assembling of loose charpoy components..
Taking out and removing old unserviceable long rail from its position and S&F new long rail as per existing shape and size, made out of 32mm bore GI pipe medium grade (ISI marked) and fixed the same in the existing position with making thread at both end complete all as specified and as shown on drawing. (Make: TATA/JINDA/BANSAL). (Drg No. FD-220)
Taking out and removing old unserviceable short rail from its position S&F new short rails as per existing shape and size, made out of 32mm bore GI pipe medium grade (ISI marked) fixed in the existing position with making thread at both complete all as specified and as shown on drawing. (Make: TATA/JINDA/BANSAL). (Drg No. FD-220)
Taking out and removing old unserviceable leg from its position and S&F new leg as per existing shape and size, made out of 32mm GI pipe medium grade and fixed the same in the existing position with making thread at one side complete as per specified and directed and shown on drawing (Make: TATA/JINDA/BANSAL). (Drg No. FD-220)
Taking out and removing old unserviceable three way elbow from its position and S&F new 32 mm dia three way GI elbow medium grade (ISI Marked) in the existing position complete all as specified and as directed and shown on drawing (Make : UNIK/AA/RK) (Drg No. FD-220)
Taking out and removing old unserviceable GI check nut from its position and S&F new 32 mm dia and 6mm thick GI medium grade, check nut & fixed in the same position complete all as specified and as directed as shown on drawing (Make : Jolly/Unik/AA/RK)) (Drg No. FD-220)
CHARPOY MS TUBING WITH HEAD AND FOOT REST (DRG NO CWE/TEZ/FD-04) CHARPOY MS TUBING W/O HEAD AND FOOT REST Removing of old underviceable plywood top and supply & fixing 12mm thick plywood BWR exterior gde of the Charpoy MS Tubing and fixing same position with nuts, washer and bolts of size 6x75mm round head bolts in each holes of the long & short rails all as directed including tightening of loose frame/assembling of loose charpoy components
Applying one coat of black paint first grade on all exposed surfaces of crarpoy MS tubing.
TABLE OFFICE OFFICER WOODEN WDF-32 Taking down old unsv top and S &F new table top size 1400x900mm made out of 18mm thick prelaminated particle board one side teak face covered with 4mm thick teak wood beading all round of the top duly polished. Rest all as specified in drg and as directed by Engr-in-Charge
RACK RECORDS WOODEN 6'x2'x6' Taking down old unsv shelves and S & F new shelves 6' x 2' made out of 18mm thick ply wood and 4mm thick teak wood beading all round of the top duly polished. Rest all as specified in drg and as directed by Engr-in-Charge
TABLE (900 x 600 X 760) MM STEEL WITH DRAWER (FD-283) M&L denting existing old painted surfaces and making the surfaces smooth (Inside and outside) by rubbing with emery paper after filling putty and spot welding where required and applying with two coats of paint 1st grade quality match to colour of table over a coat of red oxide primer by spray machine and necessary repairs to legs, stiffners and providing hard rubber shoes for legs complete as specified and shown on drawing and as directed.
Removing of old unsv top from table and S & F new table top of size 900mmx600mm made out of 18mm thick prelaminted particle board one side teak face covered with 4mm thick 2nd class hard wood beading all round of the top duly finished with french poilish superior quality. Rest all as shown on drg and as directed by Engr-in-Charge.
Taking down old unsv drawer from table 900mmx600mmx760mm steel and S & F new drawer made out of 1mm thick MS black sheet duly finished with one coat of synthetic enamel paint 1st quality ASIAN over a coat of red oxide primer to mach the colour of table. Rest all as specified and shown on drg and as directed by the Engr-in-Charge.
Taking down old unsv legs from table 900mmx600mmx760mm and S & F new legs made out of 25mm thick square tube with 1.60mm wall thickness of 760mm long duly finished with one coat of 1st quality synthetic enamel paint olive green over a coat of red oxide primer. Rest all as specified and shown on drg and as directed.
Materials and labour for running welding on broken joints of each table of 900mmx600mmx760mm with drawers. Rest all as shown on drg and as directed by the Engr-in-Charge.
MS TD CONSTRUCTION
M/S L G BUILDERS
L T CONSTRUCTION
M/S KHANDU CONSTRUCTION
M/S T G ENTERPRISES
M/S KESANG CONSTRUCTION
M/S RHEGON CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .