Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.6 LAccepted-AOC | 1 | Accepted-AOC ACCEPTED | |
| 2 | 2₹4.6 L+₹3,786.80 (0.83%)Rejected-AOC PLOT NO 58 SUNDARAM NAGAR 3RD STREET THOOTHUKUDI | 2 | Rejected-AOC REJECTED |
Tender Value
₹5.5 L
EMD Value
₹5,500
Closing Date
4 Oct 2024, 3:00 pmClosed
Commissioner
113 Thamilzh Salai(Palai Road) Thoothukudi Corporation
Construction of SWD with Culvert at Pandurangan Cross Street in East zone
2024_MAWS_486687_1
69/24-25/AEE( E)
Open Tender
Civil Works
Works
60 days
Thoothukudi Corporation
Refer tender Notice
1 document required · 1 mandatory
₹0
₹5,500
18 Oct 2024
21 Sept 2024
4 Oct 2024
21 Sept 2024
4 Oct 2024
27 Sept 2024
Amount
Dismantling PCC using deploying machineries complete as per standard specifications
Earth work excavating and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in sand silt or other loose soil, wet sand or silt not under water, light Black cotton soil, sandy loam and ordinary soil including excavated as per SS20B.
Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including mixing, laying concrete and labour charges and all incidential charges such as water , curing etc., complete as per standard specifications
Centering for sides and soffits of RCC slabs of plane surface like Vertical wall ,etc.,including strutting 3m height using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported by casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed- by the departmental officers.
Plain Cement concrete 1:2:4 using 20mm thick I.S.S. HBG metal from approved quarry including cost and conveyance of all materials and labour charges etc., complete.
Supplying and fabricating and placing in position of MS (or) RTS bar for reinforcement of all RCC works including cost of steel rods, binding wire all labour charges and incidental charges for cutting & bending rods tieing into grills and place in position as directed by the departmental officers.
Supply and fixing of cuddappa slab 38 to 40 mm thcik including cost of materials and labour charges with standard specification.
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)
Plastering cement mortar 1:4 (one cement and four sand) 20mm thick mixed using river sand including cost of materials and labour charges with standard specification.
Dewatering using 5HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.
Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
IJ Constructions (BID ID -1157221)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .