supply of De-centralized materials and works for increasing capacity and installation of TF under Business Plan 2025-26, EDD-KACHHAWA

Amount

Supply of following Decentralized materials Provide by Contractor at the works site as per RESSPO norms.

Stone pad 300x300x75 mm

X-arms holding clamps with bolts & nuts

F-bracket with bolts & nuts

Top, Dropper channel clamp with bolts & nuts for ST Pole

Top, Dropper, T-off channel clamp with bolts & nuts for PCC Pole

P.G clamps for weasel conductor

Danger board with clamp & bolts

Dead end clamp for pole/bracket with nuts & bolts

Eye- Hook

Suspension clamp with nuts & bolts

J Hook

All. Binding wire 6 mm

1x35 sq mm AC cable (XLPE)

Three phase Distribution Box

Three phase Distribution Box Clamp (LS)

E-bracket with nuts & bolts

Copper L-Piece 50x225x10 mm

Copper L-Piece 62x225x12 mm

All lugs 240 mm2

All lugs 120 mm2

All lugs 70 mm2

Stay clamp with nut & bolts for ST Pole

Stay clamp with nut & bolts for PCC Pole

Stay Insulator

Cartage of following materials from ESC, Mirzapur Provided by Department to work site including loading & unloading charge.

ST Poles 11 mtr long

PCC Poles 8.5 mtr long

All Line materials with ACSR Weasel Conductor

Arial Bunch Cable 3x50+1x35+1x16 mm2

Arial Bunch Cable 3x95+1x70+1x16 mm2

Transformer 250 KVA

Transformer 100 KVA

Transformer 63 KVA

Transformer 25 KVA

Erection

Erection of single support ST/PCC Pole for construction of 11 KV/LT line including digging of pit, fitting of all accessories, back filling of earth & others required work as per RESSPO norms.

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Earthing of Poles as per RESSPO norms

Stringing & sagging of 3 phase 11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering as per RESSPO norms

Laying, Streaching of Arial Bunch Cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per RESSPO norms

Erection of Sectional Double Pole Structure of ST Pole for distribution T/F, including digging of pit, fitting of all accessories, earthing of Pole, back filling of earth, grouting of each pole & stay sets & other required works as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Erection of Sectional Double PCC Pole Structure for distribution T/F with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of Pole, back filling of earth, grouting of each pole & stay sets & other required works as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Construction of Transformer plinth for 250 KVA Transformer of 2x2x1.5 mtr. Including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials.

Well type earthing of 250 KVA Transformer by using B class G.I. pipe of 1.5 " dia and making hand pipe type earth boring IInd strata of water or 60 ft. whichever is deeper about 6" of G.I. pipe shall remain above ground level 2 No. G.I. earth clamp shall also be welded to the portion of pipe which is above the ground level. Through this G.I. Clamp and G.I. Strip 30x5mm duly galvanized shall be connected with nut & bolts. Every DT shall have 2 such earthing, One earthing for T/F neutral and second earthing for T/F body. All requred materials shall by provided by the contractor.

Fencing of T/F with M.S. Square mesh welded/fixed on M.S. Angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing including cost of all materials.

Mounting of 25 KVA Transformer as per RESSPO norms

Mounting of 63 KVA Transformer as per RESSPO norms

Mounting of 100 KVA Transformer as per RESSPO norms

Mounting of 250 KVA Transformer as per RESSPO norms

Cartage of received back 10 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 16 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 25 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 63 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 100 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

OM SAI ENTERPRISES (BID ID -5518294)

Lal Engineering co (BID ID -5518897)

SAKAT MOCHAN ELECTRICAL (BID ID -5530234)