Construction of Plant House Godown Building and Machinery Foundations for NPK Plant at Pachora including demolition of existing dilapidated Plant and FM Godown Building

Amount

A) Dismentaling Existing Plant & Godown Building

Removing G.I. or A.C. sheet roofing including purlins, principle rafters etc. including sorting serviceable and unserviceable mateials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Removing purlins from roof including stacking as directed with all leads , lifts etc. complete.

Removing Pre Cast RCC truss from roof and stacking the materials as directed with all leads and lifts etc. complets

Removing R.S. girders of any size and span lowering the same and stacking neatly wherever directed in the compound scaffolding etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

(a) Upto 3 meter Height

(b) From 3 meter to 6 meter Height

(c) From 6 meter to 9 meter Height

(d) Above 9 meter Height

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing doors and windows with frames and stacking the materialsas directed with all leads, lifts etc. complete.

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such assteeletc. As directed and stacking them within the specified lead as directed etc. complete.

(a) Upto 3 meter Height

(b) From 3 meter to 6 meter Height

(c) From 6 meter to 9 meter Height

(d) Above 9 meter Height

Removing A.C. velley gutter including sorting serviceable and unserviceable mateials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Removing all types of down take pipes including sorting serviceable and unserviceable mateials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Removing A.C Ridge Capping elements & Ridge Componants including sorting serviceable and unserviceable mateials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Use of electric breaker for dismentaling work, R.c.c work carefully withouth disterbing and demaging the adjecent structures and its foundations etc.complete

Use of Crane having boom of 150 to 200 feet long job work etc. complete

Use of Crane having boom upto 50 feet long job work etc. complete

Removing /Carting the material available from excavation, demolision and breaking the existing structure, from site by tracket and trolly including all lead and lift, loading and unloading, including stacking debris within the factory premises for the use etc. completely

Back Filling the available debris at site in plinth and foundation including loading/unloading and carting the material within factory premises including compaction by plate vibrator including watering and compaction by power roller etc.complete

B) Construction of plant house & godown building for NPK plant at Pachora.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles each of load capacity and as per design and of 600 mm diameter or as directed placed through steel shells sunk to the required depth through all strata except rock excluding provision of reinforcement as per detailed drawings and design approved by the Engineer-in- charge including placing with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) by tremie arrangements, compaction of concrete including chipping and dressing and withdrawal of shell etc. complete. (Excluding steel reinforcement)

Chiseling through pile shells in hard strata like boulders, soft and hard rocks Beyond 550 mm and upto and inclusive of 750 mm dia. including removing and stacking the loose materials etc. complete and disposing of the unserviceable materials outside complete.

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs , beams columns, canopies, staircase, newels, chajjas, lintels pardis, coopings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete

Carrying out load test for 1.5 times the proposed safe working load on the pile in driven position above 550 mm and upto 650 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std.Specifications and dismantling the test cap after testing and cleaning the site complete.

Empty boring for 525 to 600 mm dia. bored R.C.C. cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metres etc. complete. Spec :(As directed by Engineer in Charge)

Providing bentonite slurry process for various diameter of piles vide Item Nos 1 (i to xxiv) above. Spec : (As directed by Engineer in Charge)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. pile caps as per detailed designs and drawings, including bailing out water manually, centering, formwork, laying/ pumping, compacting, finishing and curing etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) complete. (Excluding steel reinforcement)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and applying Anti corrosive treatment to reinforcement as per cement polymer composite coating (C.P.C.C.) method developed per cement polymer composite coating (C.P.C.C.) method developed by C.E.C.R.I. including cleaning the bar by means of any established mechanical or manual method for removing rust and deleterious material, applying rapid setting primer and cement polymer sealing coat of approved and licensed by CECRI including redoing the process if damage occurs during handling, stacking etc. complete. (With prio

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Providing and laying cement concrete flooring 40mm thick with M20 cement concrete laid to proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and Curing etc. complete. With Natural Sand

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm)

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side fixing in cement mortar 1:3 and curing etc. complete

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank).

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge.

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete.

Providing and fixing Country cut teak wood single leaf panelled door shutters 35 mm thick style and rail and 19 mm thick T.W. panels as per detailed drawing including wrought iron hold fast stainless steel fixtures and fastening and three coats of oil painting etc. complete.

Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc

Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing & as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.

Machinery foundations for NPK plant at Pachora.

1) EARTH WORK

2) PLAIN CEMENT CONCRETE

Providing & laying plain cement concrete of grade M15 with 25mm. Size matel below foudation & floor bedding including bailing out water, formwork compacting & curing complete.

3) REINFORCED CEMENT CONCRETE

Providing & laying in situ cement concrete of grade M25 with 18mm. Metal, vibrated form finish, dense R.C.C. Footigns, & Rafts, as per detailed drawing, design and/or as directed including bailing out water, form work, compacting formed surfaces to give a smooth & even surface curing etc. complete. (Excluding Reinforcement & dewatering by pump)

Providing & laying in situ cement concrete of grade M25 with 18mm. Metal, vibrated form finish, dense R.C.C.columns in foundations & superstructure upto 7.5M wherever required bailing out water, form work, compacting formed surfaces to give a smooth & even surface or roughtening if required & curing etc. complete. (Excluding Reinforcement & dewatering by pump)

Providing & laying in situ cement concrete of grade M25 with 18mm. Metal, vibrated form finish, dense R.C.C.Pedestals in foundations & superstructure upto 7.5M wherever required as per detalied drawing, design &/or as directed, including bailing out water, form work, compacting formed surfaces to give a smooth & even surface or roughtening if required & curing etc. complete. (Excluding Reinforcement & dewatering by pump)

Providing & laying in situ cement concrete of grade M25 with 18mm. Metal, vibrated form finish, dense R.C.C.plinth & floor Beams, in superstructure upto 7.5M wherever required as per detalied drawing, design &/or as directed, including bailing out water, form work, compacting formed surfaces to give a smooth & even surface or roughtening if required & curing etc. complete. (Excluding Reinforcement & dewatering by pump)

Providing & laying in situ cement concrete of grade M25 with 18mm. Metal, vibrated form finish, dense R.C.C.Slab in superstructure upto 7.5M wherever required as per detalied drawing, design &/or as directed, including form work, compacting formed surfaces to give a smooth & even surface or roughtening if required & curing etc. complete. (Excluding Reinforcement)

Providing & laying in situ cement concrete of grade M25 with 18mm. Metal, vibrated form finish, dense R.C.C.Wall upto 300mm thick, in foundation as per detailed drawing, design &/or as directed, including form work, compacting formed surfaces to give a smooth & even surface or roughtening if required & curing etc. complete. (Excluding Reinforcement)

Providing & fixing in position HYSD (Tor) steel &/or mild steel reinforcement bars of various diameter for R.C.C. work as per structural design, drawings, details & schedule including cuttinng, bending, hooking binding with wire or tack welding, supporting with cover blocks.

Providing pockets of size upto 150 x 150 mm. 600 deep for machinery bed plates & foundations as per detailed drawings & details etc.complete.

Grouting of pockets in non shrink grouting material (Conbextra GP2), after erection of machinery & fixing in position foundation bolts of various dia. Upto 25 mm. & lenth upto 600 mm. as directed. maintaining true line, level plumb & centers, etc. complete.

Grouting of bed plates in concrete M30, after erection of machinery & fixing in position of foundation bolts with line level, alignment, maintaining true line, level plumb & centers as directed etc. complet

4) MASONRY WORK

Providing & constructing second class burnt brick masonry with conventional ground moulded burnt bricks in C.M. 1:4 for superstructure including raking out joints on exposed faces, watering curing etc. complete.

Providing applying 20 mm thick waterproof cement plaster with 5% waterproofing compound & neat cement punning finish in single coat of cement mortar 1:3 proportion, concrete surface of R.C.C. pits in all positions as directed, including providing haunches at the junction of horizontal & vertical surfaces with concave curves, making the pit water proof, scaffolding, watering, curing etc. complete.

Providing & laying in situ 75 mm. thick cement concrete of grade M20 with 18 mm metal & 5% plasticiser for well vibrated form finish, dense P.C.C. flooring as per detailed drawing, design &/or as directed, including bailing out water, form work, compacting formed surfaces to give smooth & even surface finised smooth, with all joints filled by bitumen based filter, watering, curing etc. complete.

5) MISCELLANEOUS WORKS

Providing fabricating & erecting structural steel work in foundations & floor frames as per drawing, details & as directed, including, cutting, fabricating, drilling holes, hoisting, erecting fixing in position with insert plates, hold fast etc. complete.

Providing, fabricating, erecting & fixing in position 700 mm. wide M.S. service ladder of ISA 75x75x8 mm M.S. angle stringer frame & tread of 16 mm dia. bars as per drawing details & as directed including M.S. pipe railing of 32 mm nominal dia. vertical & top rail, & 25 mm Nominal dia. horizontal pipes at 300 mm centers, keeping insert plates & welsing after erection, with one coat of red oxide & two coats of oil paint etc. complete.

Providing, fabricating, erecting & fixing in position 1.0 m high M.S. pipe railing of 32 mm nominal dia. vertical & top rail, & 25 mm Nominal dia. horizontal pipes at 300 mm centers, as per drawing details & as directed including keeping pockets in slabs & grouting after erection & one coat of red oxide & two coats of oil paint etc. complete.

Providing & constructing cable trench of size 800 x 1000 mm below panel board, as per drawing, details & as directed, including excavation, M15 P.C.C. bed, 350 mm thick brick wall in C.M. 1:4 & R.C.C. coping beam, watering curing etc. complete.

Providing & constructing cable trench of size 500 x 500 mm as per drawing, details & as directed, including excavation, M15 P.C.C. bed, 230 mm thick brick wall in C.M. 1:4 & filling trench with sand after cable laying, shahabad tile covers, watering curing etc. complete.

Providing & constructing cable trench of size 300 x 500 mm as per drawing, details & as directed, including excavation, M15 P.C.C. bed, 230 mm thick brick wall in C.M. 1:4 & filling trench with sand after cable laying, shahabad tile covers, watering curing etc. complete.

Anant Ramesh Patil

Harsh Constructions Pvt Ltd

M. S. JAIN

M/s Patil And Baheti Infrastructure

M/s.A.S.Wadgaonkar