Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹29.7 L+₹7.8 L (35.6%)Rejected-Finance G 58 KIRAN GARDEN UTTAM NAGAR NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance High Rate Quoted | |
| 3 | L3₹32.2 L+₹10.3 L (47.1%)Rejected-Finance TILAK NAGAR NEAR NO 1 TUBEWELL MARWAR MOTERS STREET BIKANER 334001 | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance High Rate Quoted | |
| 4 | L4₹32.8 L+₹10.9 L (49.9%)Rejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJ 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L4 | Rejected-Finance High Rate Quoted | |
| 5 | L5₹34.7 L+₹12.8 L (58.5%)Rejected-Finance | L5 | Rejected-Finance High Rate Quoted |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Shery Goel, CWE Bikaner
HQ CWE Bikaner, Bikaner Mil Stn
Smart Periodical services of MD accn for Zone C and under AGE B/R-II at Mil Stn Bikaner
2024_MES_649941_1
CA No CWE BKN-Token No. 83/2023-2024
Open Tender
Miscellaneous Works
Item Rate
180 days
GE N BIKANER
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (N) Bikaner
₹80,000
Yes
1 Jul 2024
12 Apr 2024
20 May 2024
12 Apr 2024
18 May 2024
26 Apr 2024
12 Apr 2024 - 17 Apr 2024
Amount
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed.
Taking down cement plaster or cement lime plaster, terrazo etc on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.
M&L 25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in any position in floor/roof complete all as specified and as directed.
Supply only integral liquid water proofing compound (ISI marked) complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on concrete solid block surfaces of walls, finished even & smooth without using extra cement complete all as specified.
M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5mm thick plaster in CM 1:4, 2nd layer mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished fair & even, complete, all as specified and directed. Note :- Supply only integral liquid water proofing compound shall be measured and paid for separately.
M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L for preparation of old surfaces by complete removal of existing treatment of painted walls including pillars etc by mechanical equipments like electric wall sander/water jet machine and applying cement based putty 1mm thickness over plastered surface to prerare the surface even and smooth and applying two coats of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre of approved manufacturer of required shade and colour over a coat of alkali resistant primer complete by mechanical means as per manufacturer's specification complete all as specified and as directed.
M&L for preparation of old surfaces by complete removal of existing treatment of painted ceiling including beams etc by mechanical equipments like electric wall sander/water jet machine and applying cement based putty 1mm thickness over plastered surface to prerare the surface even and smooth and applying two coats of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre of approved manufacturer of required shade and colour over a coat of alkali resistant primer complete by mechanical means as per manufacturer's specification complete all as specified and as directed.
M&L for preparation of old surfaces by complete removal of existing treatment of painted walls/ceiling including pillar etc by mechanical equipment like electric wall sander/water jet machine and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete by mechanical means as per manufacturer's specification complete all as specified and directed.
M&L for preparation of new surfaces of walls/ceiling including pillar etc and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete by mechanical means as per manufacturer's specification complete all as specified and directed.
M&L for preparation of new surfaces of walls including pillar etc and applying cement based putty of 1mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer of required shade and colour over a coat of alkali resistant primer complete by mechanical means as per manufacturer's specification complete all as specified and directed.
M&L for preparation of new surfaces of ceiling including pillar etc and applying cement based putty of 1mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer of required shade and colour over a coat of alkali resistant primer complete by mechanical means as per manufacturer's specification complete all as specified and directed.
M&L for preparation of old decorated surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash including cornices pilasters etc complete all as specified & as directed.
M&L for preparation of old decorated plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint with roller complete all as specified & as directed.
M&L for preparation of old or new surfaces of walls/ceiling and applying 1mm thick cement based external wall care putty for smooth finish complete all as specified & as directed.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm in width or girth and applying one coat of synthetic enamel paint by mechanical means of approved tint complete all as specified & as directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint by mechanical means of approved tint complete all as specified & as directed.
NOTES FOR SERIAL ITEM NO. 8.00, 9.00, 10.00, 11.00, 12.00 & 13.00 of BOQ. (a) The work pertaining to periodical services & water proofing shall be executed by authorised applicator through manufacturer of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) For surface preparation, complete removal, scraping and putty surface preparation mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500 with sanding pad should be used. (d) For application of primer, paint and putty fully automatic airless spray machine should be used. (e) After preparation of the surface, Engineer-in-Charge shall approve the same before applying primer and finishing coats. (f) Building wise stage passing register shall be maintained and shall be signed by Engineer-in-Charge and contractor. Each stage shall be passed by Engineer-in-Charge before commencement of subsequent stage. The stage will be as follow (i) Surface preparation (ii) Application of Putty (iii) Application of Primer (iv) Application of 1st coat of Acrylic distemper/ emulsion (v) Application of 2nd coat of Acrylic distemper / emulsion (g) The equipments to be used in the work shall be certified by the manufacturer. (h) Paint to be centrally deposited with Engineer-in-Charge and store to be double locked with one lock of contractor and second lock of department, paint will be issue centrally for execution of by MES Authority. (j) At the execution time door and windows will be proper covered/ protect and will be cleared the walls, glass, window, window/door frame, floor, plinth protection, pavement after execution of work. (k) Contractor shall submit approved company generated 05 years warranty card for particular work carried out before submission of respective RARs.
SUMIT ENTERPRISES
JANGID CONSTRUCTION COMPANY
SUBHAM ENTERPRISES
vikas builders
HARPREET SINGH CONTRACTOR
BIDAWAT ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .