WELCOME MAINT INCL MISC B/R AND REPAIR WORK TO MD OFFRS ACCN AT MALL ROAD, MANDIR MARG, TIGRIS ROAD, POLO ROAD, CHURCH ROAD, HQ DELHI AREA COMMAND HUTS, CENTRAL AMENITIES ETC IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 2.00 Sqm each complete all specified and directed.

Taking down shutters of any description exc 2.00 Sqm each complete all specified and directed.

Refixing doors shutters in same opening any description n.exc 2.0 sqm. complete all specified and directed.

Refixing doors shutters in same opening any description exc 2.0 sqm. complete all specified and directed.

S & F framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.

S&F Factory made, Plain framed panelled shutters of second class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed (Note :- Glass/ wire mess shall be paid separately) Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.00 Sqm to 2.50 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed (Note: The unit rate quoted by contractor include all other connected accessories., including 5mm glass and wire mesh Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

S&F factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area of window upto 1 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixingframe the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. (Note :- Glass/ wire mess shall be paid separately) Note: The unit rate quoted by contractor include all other connected accessories, Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.90 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction. (Note :- Glass/ wire mess shall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

Providing and fixing factory made uPVC white colour frame 60 mm x 58 mm for fixed glass window/ opennings etc , made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, including glazing bead 35 mm x 20 mm all, including fixing with three track three panel door also etc as complete and as directed,( Note :- Glass shall be paid separately).

S & F anodised aluminium frame for doors, windows, ventilators / AC provision window frame with or without three track window provision etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, including Glass / wiremesh/ partical board/ ACP board etc complete all as specified

S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass / wiremesh etc any type paid separately)

S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, hinges, handles, glass and wire mesh for panels complete all as specified and as directed.

S&F 8 mm thick Toughned glass as in doors, windows, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed

S & F in reapir for 10 mm thick (toughened glass with frosted glass) of approved quality fixed in partation/door's/ cubical for toilets etc including necessary all stainless steel hardware fittings (As like frame , brackets , clits, jammers, stopers, handels etc) complete drilled for fixing with all fitting and fixture including dismantled old glass any type complete all as specified and directed

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.

S & F 3 mm thick sheet glass, ordinary quality and glazed in square n exc 0.50sqm in each pane fixed complete all as specified and directed.

S & F 3 mm thick figured glass, pin head type and glazed in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 5 mm thick sheet glass, ordinary quality and glazed in square n exc 0.50sqm fixed complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples as specified and directed.

S & F solid PVC door frame of size 50 mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed

M & L with fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make :Action tesa or equivalent as approved by GE)

M & L with Fabrication & fixing to front side /all exposed sides of Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with glossy/maat colour laminate sheet on front face and all exoposed sides and white laminate on other face of approved quality and including paste to all exposed edge by edge Banding Tape and including provision of cabinet for keeping baskets/ drawers etc & modular handle less , including aluminium G/C/J profile handle or stainless steel handle for front face as required including auto soft closing hinges and etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make :Action tesa or equivalent as approved by GE)

S & F in repair soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich/ IPSA)

S&F 18 inch (45 CM) telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make : - Godrej/Hettich/IPSA).

Supply Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement over telescopic channel. (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

Supply for Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement over telescopic channel. (Make: Godrej Cat part No 3441or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

Supply Stainless steel plain basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement over telescopic channel. (Make: Godrej Cat part No 3892, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S & F 250 mm long Stainless steel bright polished sliding door bolts, plate type, stove with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to door complete all as specified and as directed

S & F 150 mm size Stainless steel bright polished barrel tower bolts,for doors with bright bolt

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

S & F 100mm size butt hinges stainless steel complete all as specified and as directed.

S&F mild steel butt hinges medium weight cold rolled of size 100 mm and fixed to shutters. complete all as specified and as directed.

S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed

S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F in repair cast iron body aluminium finished with box , double action floor door closer/spring for heavy duty door of aluminium/wooden/toughened glass etc all as specified and directed.

S & F magnetic catches for cupboard , shelves, etc complete all as specified and as directed.

S & F for stainless steel 125 mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed.

S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall with finials and bracket etc complete all as specified and as directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of watertanks and similar work .

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.

M&L 4mm thick desginer false ceiling e- board ( Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc. complete all as specified and directed.

S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T', channel or any section including screws, cleats ,fasteners, clips and all required accessories, hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc) or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of primer complete all as specified and directed.

M&L PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

M&L WPC decorative wall panels/louvers 15 to 25 mm thick design patern wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

S & F wall paper good quality (design& colour & patern as approved by GE) including adhesive on wall etc for fixing all as specified and directed

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

Taking down cement or cement lime plaster , any description on brick or stone walls/concrete surface etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position etc complete all as specified and directed

M & L rendering 10 mm thick on fair faces of concrete or concrete surface in ceiling / bottom of roof slab/ chajja etc in CM 1:3, finished even and fair in any position etc, complete all as specified and as directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position incl scafolding as required etc complete all as specified and as directed.

M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc including demolition old existing any type PCC etc all as specified and directed

M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -12 mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in floors. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 in floor after including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) size 395 x 395 mm / 400 x 400 mm , in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected

M & L Coloured Glazed ceramic tiles size 600 x 300 x 7-8 mm thick, in vertical surface such as skirting, dados, etc set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick rendering in CM 1:4 and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected

M&L for vitrified Ceramic tiles, full body/double charged, 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm x 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete laid over and including 15mm thick rendering in cement mortar (1:6) and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected

M&L for vitrified Ceramic tiles, full body/double charged, 8 to 10 mm thick (shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm x 1200mm as in skirting/dado/vertical surface etc laid over and including 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected

M & L for french polishing on surfaces of any description , width or grith including cleaning and preparing the surface including a coat of wood two or more coats on old surface / work etc completed all as specified nd directed

M & L for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick screed bed/rendering in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing and connecetions in any postion etc complete all as specified and directed.

S&F in repair 15mm quarter turn brass angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure,suitable for 15mm bore steel tubing complete all as specified & directed. (Make : Jaquar / Marc / Kohler)

S & F in repairs 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch/ butterfly handle/quarter turn handle etc suitable for 15mm bore steel tubing complete all as specifed and directed. ( Make : Jaquar / Marc / Kohler)

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc / Kohler )

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. (Make : Jaquar Continental CON-CHR-273KNUPR or equivalent in Marc / Kohler)

S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 or equivalent in Marc / Kohler)

S & F in reapir CP shower rose fancy type 200x200mm size with 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make : Jaquar / Marc / Kohler)

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S & F in repair Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 or equivalent in Marc)

S & F in repair SS soap dish complete all as specified and as directed. (Make : Jaquar /Marc /Kohler)

S & F in repair Stainless steel Grating dome 125mm dia with or without hole for waste pipe complete all as specified and as directed.

S & F in repair CP Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. (Make : Jaquar / Marc / Kohler)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make : Jaquar / Marc / Kohler)

S & F in reapir Stain less steel CP towel rack of size 600mm x 350 mm , fixed with ss screws complete all as specified and as directe. (Make : Jaquar / Marc / Kohler )

S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed. ( Make : Jaquar / Marc / Kohler)

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. (Make : Jaquar / Marc / Kohler)

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap / 'P" Trap , including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S & F in repairs Vitreous china Rimless Bowl With Cistern For Extended Wall Hung WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 380x650x730 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No.FLS-WHT-5353PPZ or equivalent in Marc / Kohler )

S & F in repairs Vitreous china single Piece WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler )

S & F in reapir Vitreous china Table Top wash hand basin Size: 520x360x 125 mm With Fixing Accessories etc and including chromium plated brass waste coupling etc complete all as specified and as directed. (Make : Jaquar Cat part No. FLS-WHT-5931 or equivalent in Marc / Kohler)

S & F in repair Vitreous china full pedestal pattern wall hung wash hand basin with pedestal , size of basin Size: 560x415x200 mm as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed. Make : Jaquar Continental Series Cat part No. CNS-WHT-801 or equivalent in Marc / Kohler )

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket & flushing pipe etc complete all as specified and directed

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)completed all as specified and directed

S & F in repair 75 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)completed all as specified and directed

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

S & F in repair 75 mm dia PVC cowls completed all as specified and directed

S & F in repair 110 mm dia PVC cowls completed all as specified and directed

S & F repair 75 mm PVC (SWR) bends with acess door completed all as specified and directed

S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDHMR board, both side laminated and front side melamine surface , Size of Vanity box 22 inch upto 26 inch including Wash hand basin with brass waste coupling. ( Design, colour and patern as approved by GE) Make : Hindware or as approved by GE)

S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDHMR board, both side laminated and front side melamine surface , Size of Vanity box 32 inch upto 36 inch including Wash hand basin with brass waste coupling. ( Design, colour and patern as approved by GE) Make : Hindware or as approved by GE)

M & L for complete removal of exisitng treatment of old decorated plastered surfaces of walls, Ceiling pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/ holes in surface filling with white putty to receive further treatment including preparation of old surface complete all as specified and directed.

M & L applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall/ceilling even and smooth by sander etc and providing two coats of distempering with 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre over a coat of interior primer of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush complete all as specified and directed

M & L providing two coat of 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre, over a coat of interior primer of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed

M & L for preparation of internal/external new surface of plaster/concrete surface of walls, pillers, cornices etc and applying two coat of acrylic distemper complete all as specified and directed.

M & L for preparation of new surface of plaster/concrete surface of ceiling / bottom of roof slab etc and applying two coat of acrylic distemper complete all as specified and directed.

M & L for two coat of white wash applying on any type of old prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for two coat of white wash applying on any type of old prepared surface of ceilings/ bottom of roof slabs etc complete all as specified and directed.

M & L for one coat of distempering with 1st quality acrylic distemper (ready mixed) (interior) of approved manufacturer, of required shade and colour , as per manufacturer's specification and using roller brush, applying on any type of old prepared surface of walls,ceiling, pillers, cornices etc complete all as specified and directed.

M & L for two coat of weather proof exterior emulsion paint premium quality over a coat of 2mm putty and one coat of primer of approved manufacturer, of required shade and colour, as per manufacturer's specification and using roller brush, applying on any type of old prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for preparation of old distempered surfaces of walls, ceiling ,pillers, cornices etc by scrapping down smoke soot, moulds, moss, efflorescent salts , trading oil and greasy spots and including cracks/holes in surface filling with white putty and scrapped surface area to obtain smooth finishing with wall care putty as required and providing two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M&L for applying Two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

S&F in repair aluminium door seal brown/white coated with PVC brush or PVC flexible door rubber fitted in bottom of door complete all as specified and directed

S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1153S or equivalent in Marc/Kohler)

All same as per srl item No 64 here-in-before but in dado/ skirting with 10 mm thick rendering in CM 1:4 complete

M/s Shubh Enterprises (BID ID -3101374)

M/S BHARAT BUILDERS (BID ID -3098392)

MAA SANTOSHI ENTERPRISES (BID ID -3098574)

POONAM ENTERPRISES (BID ID -3099563)

Vipul Construction (BID ID -3101754)

garnet engineers contractors (BID ID -3099659)

V M CONSTRUCTION (BID ID -3097271)

sunil traders (BID ID -3101898)

M/S Rohit Enterprises (BID ID -3102127)

tarun construction co (BID ID -3100871)