SPECIAL REPAIR TO TOILET BLOCK (GF) OF 340 (I) MECH BDE SIG COY AT JALIPA MIL STN UNDER GE (A) BARMER

Amount

Demolition of brick/stone walling built in cement mortar including all quoins, arches, pillars etc., including removing rubbish to out side MD land complete all as specified and as directed.

Precast cement concrete solid block masonry of 1:3:6 type C-1 by using 20mm graded crushed stone aggregate exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L squared rubble jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed .

M&L keyed pointing in cement mortar (1:3) to random rubble masonry , un coursed complete all as specified and directed .

Demolition of wall / floor tiling of any description of any thickness laid bedded and pointed in any mortar including backing coat/screed bed complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including removing rubbish to out side MD land complete all as specified and as directed.

Glazed coloured ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed. Note : Colour & designed as per approved by Engr-in-Charge.

Non skid ceramic tiles, coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L granite slab 18 to 20mm thick machine cut, factory polished, as in step treads, window cills, cooking platform, and like bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L 75 MM thick PCC 1:4:8 type D2 by using 40mm graded stone aggregate as in sub-base filling and mass concrete complete all as specified and directed.

M&L 25mm thick (average) PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in base course, the surface of concrete is to be finished even and rough with out using extra cement complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.

Rendering internally 10 mm thick in cement mortar1:6 on block / concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

Rendering externally 15 mm thick in cement mortar1:4 mixing with water proofing compound ( WPC) as per manufacturer instructions on block / concrete surfaces finished fair and even with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

M&L for plastering 5 mm thick in CM 1:3 on stone/ concrete surfaces of ceiling , finished even and smooth without using extra cement complete all as specified and as directed. .

M&L for preparation of newly plastered wall surfaces and applying Three coats of white wash complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed .

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F for 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 100 mm size aluminium anodised handles, caste type, complete all as specified and as directed.

S&F 100mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 100mm size, butt hinges,Mild steel including necessary welding if required complete all as specified and as directed.

M&L vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (Excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe,anti- syphonage pipe, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 580 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe etc complete all as specified and as directed.

S & F vitreous china urinal, half stall type, flat back, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, 32mm bore PVC flexible waste pipe, grating and union for discharge pipe, CP screws etc complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S&F in repair fancy type, 200 x 200 mm shower with long arm, cast copper alloy with coromium finish complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed.

S&F in repair fancy type, chromium plated, bib tap, long body cast copper alloy with spindle,half turn with screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repair stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and as directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, fancy type,brass chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed .

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps of suitable size complete all as specified and as directed .

S&F 110mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.

S& F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S& F 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.

S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S& F in repairs stainless steel curtain rods of 1 mm thick and 25mm dia, including 8 nos PVC rings per running meter of curtain rod complete all as specified and directed.

Preparation of new or previously untreated old decorated wooden surfaces of any description, not otherwise described over 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old decorated steel surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including in PVC conduit with all fittings and accessories , complete fixed on wall/roof/floor etc, with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 36.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 36.00 above but for 5 Amps socket point on independent board.

S&F in replacement switch piano 5 Amp flush type single pole one way with ISI marked,complete all as specified and as directed.

S&F in replacement socket outlet 5 Amps 2-in-1, 3/5 pin 230 V AC flush type, complete all as specified and as directed.

S&F in replacement switch socket outlet 5 Amps 2-in-1, 3/5 pin 230 V AC flush type, complete all as specified and as directed.

S&F in replacement ceiling rose, 50 mm dia, 3 phase / PVC / Polycarbonate, isolated body two to three terminals complete all as specified and as directed.

S&F in replacement of LED tube light fitting 20W 4 feet PVC extruded with batten ( integrated driver), 6500K colour temp, decorative type with all accessories internally pre wired including retrofit T5 polycarbonate tube with connector block and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Havells / Bajaj /Philips / CG

S&F in replacement of LED tube light fitting 10W 2 feet PVC extruded with batten ( integrated driver), 6500K colour temp, decorative type with all accessories internally pre wired including retrofit T5 polycarbonate tube with connector block and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Havells / Bajaj /Philips / CG

S&F in replacement of Exhaust fan 380mm sweep including provision of 3 core 23/0.0076 size flexible copper cable from ceiling rose to fan complete all as specified and as directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing & caping including cutting chases for cinduits and making good disturbed surfaces complete all as specified and as directed.

M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

S&F in repair factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

S&F in replacement of MCB SPN ‘C’ Curve 10KA, 6 to 32 amps 240 volt complete all as specified and directed .

S&F in replacement of MCB SP ‘C’ Curve 10KA, 6 to 32 amps 240 volt complete all as specified and directed .

Supply and fixing single pole neutral enclosure with two pin and earth plug and socket modular type complete with one single pole MCB 20 Amps Make: havells/legrand/schneider

Supply and fixing water heater storage type, electric, capacity 25 Liter, BEE 5 star complete all as specified and as directed.

M/s Malinath Electricals

AMBEY MAA CONSTRUCTION COMPANY

Devi Engineeing

Kusum Traders

M/S Dharam Chand Lal Chand Jain

mateshwari engineering