Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder found in order | |
| 2 | L2₹11.6 L+₹1.3 L (12.1%)Rejected-AOC | L2 | Rejected-AOC accepted | |
| 3 | L3₹13.3 L+₹2.9 L (28.0%)Rejected-AOC | L3 | Rejected-AOC accepted | |
| 4 | L4₹16.3 L+₹5.9 L (57.0%)Rejected-AOC | L4 | Rejected-AOC accepted | |
| 5 | L5₹17.7 L+₹7.3 L (70.4%)Rejected-AOC | L5 | Rejected-AOC accepted |
Tender Value
Refer Docs
EMD Value
₹29,800
Closing Date
29 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS
GE 874 EWS C/O 56 APO
DESLUDGING CLEANING REPAIR TO SOAK WELL SEPTIC TANK AND MISC WORKS IN AREA OF AGE BR-I UNDER GE 874 EWS
2023_MES_630736_1
GE 874/EWS-69/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS C/O 56 APO
₹29,800
Yes
8 Feb 2024
1 Dec 2023
5 Jan 2024
1 Dec 2023
29 Dec 2023
15 Dec 2023
1 Dec 2023 - 8 Dec 2023
Amount
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.
All as per item No.2 above but each additional 1.5m or part thereof in depth beyond the first 1.5 m in depth and getting out soft /loose soil.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed. Note:- Reinforcement cut as required to facilitate demolition).
Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete brick work, masonry, etc. any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling fencing wire mesh any type complete all as specified and directed.
M & L for dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement, mortar 1:4, complete all as specified and directed.
M&L for walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in CM (1:4), complete all as specified and directed.
M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for Plain cement concrete (1:4:8), type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.
M&L for cement concrete 1:3:6, type C-2 using 40mm graded aggregate as in surface channels and drains complete all as specified and directed.
M&L for providing pre cast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
S&F mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts. posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.
M&L for plain cement concrete (1:2:4), type B-1 using (20mm graded crushed stone aggregate) as in copings, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified and directed.
M&L for use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on flat rough finished surface of concrete complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire stapples or steel pins etc. as directed and complete all as specified and directed. Note:- Each line wire to be measured.
M&L for preparation of new or previously untreated steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 15 mm thick rendering cement plaster in cement mortar (1:4), on stone masonry surfaces and finished even and smooth without using extra cements complete all as specified and directed.
M&L for raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought up to courses complete all as specified and directed.
M&L for preparation of old wall surfaces and applying two coats of cement base paint over a coat of primer of chalk whitening, complete all as specified and directed.
M&L for boulder filling dry hand packed tightly as in vertical bunds with slopping face in the back side of retaining wall complete all as specified and directed.
M&L for providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m openable length ( total length 90m) having 50 nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick and weight 43.478 gm/metre including taking down old unserviceable concertina coil fencing complete all as specified and directed. Note:-Cost of M.S. angle, CC Blocks shall be measured and paid separately)
M&L for mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and wielding angles, as necessary, gusset plates, riveting etc., n exc 10 kg each bracket conforming to Fe. 290. Gde-E-165 complete all as specified and directed. Note:-Brackets over 10kg each to be measured separately under item of 'Structural steel'.
M&L for dismantling cast iron work of any description all as specified and directed.
M&L for PVC (SWR) pipes, single socketed, in any length, with rubber rings 75 mm dia complete all as specified and directed.
M&L for PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia complete all as specified and directed.
M&L for Cleaning of septic Tank of various capacity including chamber, outlet chamber and removing out all waste solid material / sludge out of cantonment area in a closed container and burring in borrow pits and covering with fresh mud , writing the date of cleaning of septic tank with black and white paint of size 150x200mm and finally spraying unslaked lime, dry around the septic tank and over the pit complete all as directed (Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderer) complete all as specified and directed. Note:- Qty of thick solid shall be measured for payment under this item.
M&L for Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed.
M&L for 60mm thick Machine Pressed precast paver block M-35 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment (LAQUER FINISH) and including dismantling of paver blocks etc complete all as specified and directed. Note: Sand cushion shall be measured and paid separately.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for providing cement concrete 1:2:4, type B-0 using 12.5mm graded aggregate, 25smm thick as in flooring finishes the surfaces even and fair without using extra cement complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/clading to wall, fixed with self-tapping screws, complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/clading to wall, fixed with self-tapping screws, complete all as specified and directed.
M/S RJ BUILDERS
GH MOHD SHAH AND CO
M/S AB AHAD RATHER
M/S ASMATULLAH SHAH
M/S LONE CONSTRUCTION COMPANY
Bidder Name
M/S RJ BUILDERS
M/S AB AHAD RATHER
M/S SAJAA CONSTRUCTION COMAPNY
M/S ASMATULLAH SHAH
GH MOHD SHAH AND CO
M/S LONE CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .