Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹7,165
Closing Date
25 Sept 2024, 4:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
Basavanagouda Gangappalavar
Material for Mgnrega SWM unit venkatagiri kote gramapanchyath
RDPR/2024-25/IND3856
RDPR/2024-25/IND3856
Open
Two Tender Document System(Two Cover)
RDPR Gram Panchayat Office Venkatagirikote TP Devanhalli
3 documents required · 0 mandatory · 3 optional
The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s) similar to the type specified in the ‘Schedule of Requirements’ up to at least xxxx % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after xxxxx and be in satisfactory operation for xxxxx months as on date of tender opening. Certificates to be provided as per Section XII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The tenderer, as authorized representative/dealer , has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document.
The legal status, place of registration and principal place of business of the company or firm or partnership.
Details of experience and past performance of the tenderer on equipment offered and on those of similar nature within the past three/five years2 and details of current contracts in hand and other commitments.
A detailed description of the essential technical and performance characteristics of the goods.
A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser.
As per the tender documents
₹500
₹7,165
5 Sept 2024
5 Sept 2024
30 Sept 2024
17 Sept 2024
PVC sheet 5mm VN
Add White lead paint, gasket, cement, sand for making good the wall and floor at 2percent on Material VN
Lead or PVC connection pipe 32mm dia (for wash basin) VN
C.I. / M.S. brackets for flushing cistern VN
Transportation charges of materials beyond 5 KM at 10percent VN
Labour charges for handing errection of RCC rings etc. at 5percent VN
Add 5percent for fittings and wastage charges VN
Add Cement sand and grit 1percent on Material VN
PVC pipe of 10kg/cum,110 mm VN
Handling loading and unloading 3percent on Material VN
Labour charges for lifting and placing in position and making connection at 7percent on Material VN
Add Tools Transportation and machinaries 1percent on Material VN
Locking arrangements at 1percent on A VN
Add HOM of welding and grinding machine at 2percent on Material VN
Welding Charges at 10percent on Material VN
Tools & plants and electrical charges at 2percent VN
Add Brush at 1percent on cost of paint VN
Add Wire brush, fine steel wool, putty, sand paper, at 3percent on cost of paint VN
Add providing and removing scaffolding at 3percent on Labour VN
Add Brush, putty, sand paper at 2percent on cost of paint VN
Add Handling , loading and unloading at 1percent on Material VN
Add sundries charges at 2 percent on Material VN
Brass stop cock VN
CP brass waste 32 mm of standard pattern VN
CP brass chain with plug VN
Copper plated brass piller tap 15mm VN
White vitreous china clay flat back wash basin size 630x450mm VN
RCC Cap 1000 mm dia, 100 mm thick VN
Fabrication charges. VN
Cost of 6.5mm M.S. Coil VN
Polythylene pipes high density 25mm external dia VN
Licenced Plumber with tools VN
Polyenthylene water storage tank of specified capacity L VN
Solvent cement adhesive VN
MS cleats with bolts and nuts to rest on pile VN
Pintels including welded pins VN
Angle iron 40x40x6mm VN
Gusset plates 3.15 mm thick VN
MS sheet 1 mm thick VN
Bottom lock nail VN
Locking arrangments VN
Center pully VN
Ball bearing for rolling shutters VN
High tension coil VN
MS side shed clamps VN
Suspension shaft VN
Binding wire VN
TMT bars Fe 500 VN
weld mesh 75 x 25 mm of 6G to 10G VN
Unit Cost as per the Specification VN
Fitter Class I VN
Aluminium paint VN
Wire mesh 50mm x 50mm VN
Enamel metal paint VN
Ready mix primer paint (Ready mix red lead paint) VN
HOM of cutting and grinding machine VN
HOM of welding and grinding machine VN
Welder Grade I VN
Corbon electrodes VN
Anchor Bolts 750mm VN
Base plate / base plate VN
Gusset plates 6 mm thick VN
MS angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr VN
Painter Class I VN
water proofing cement paint VN
Broken granite metal 10 mm VN
Broken granite metal 20 mm VN
Gauge (18) 75 mm MS Laths of 2.8 m Length
MS angle iron 50mm x 50mm x 6mm, 33.8 mtr in length at 4.5 kg per mtr
Burnt bricks class 35 (non modular) VN
Stone Chistler Class II VN
Mason Class II (with tools) VN
Mason Class I (with tools) VN
Mixer (concrete small used in culvert) VN
Bond stone 20 x 20 x 45 cm VN
Size stone 20 x 20 x 25 cms VN
Casurina poles 100 - 150 mm VN
Add Handling , loading and unloading at 2percent on Material VN
Casurina Poles 75 - 100 mm dia VN
Jungle wood runners and planks VN
Silver oak or equivalent planks 38 mm thick VN
HOM of Vibrator 0.71 days VN
Plasticizer / super plasticizer VN
Add sundries charges at 1 percent on Material VN
Add watering charges at 1 percent on Material VN
Mixer (concrete) - 1 cum Capacity VN
Portland Cement VN
Coarse sand (zone III) VN
Broken stone aggregate 12 mm to 10 mm size VN
Broken stone aggregate 20 mm size VN
Broken stone aggregate 40 mm size VN
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
SWM Unit Meterial Tender Documents..docx
Tender Document • 7.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .