Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC | ₹1.1 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹1.2 CrRejected-Finance FLAT NO 50 SASTANGA COLONY GONDUR ROAD NEAR BSNL OFFICE DHULE DEVPUR DHULE | DHULE | DHULE | MAHARASHTRA | ₹1.2 Cr | L2 | Rejected-Finance L2 |
| 3 | L3₹1.2 CrRejected-Finance PLOT NO 23 SITAI BUNGALOW NITYANAND NAGAR BEHIND NATRAG TALKIES DHULE 424004 | DHULE | DHULE | MAHARASHTRA | 424004 | ₹1.2 Cr | L3 | Rejected-Finance L3 |
Updated dates
Tender Value
₹1.3 Cr
Closing Date
3 Nov 2025, 11:00 amClosed
President Sarvadnya FPC nandkhurd
President Sarvadnya FPC nandkhurd
CONSTRUCTION OF GODOWN 1000 MT AND PROCESSING UNIT 165.62 SQ.MT
2025_DOAWB_1220573_1
SMART/JAL/SARV/WORKS/13/2025
Open Tender
Civil Works
330 days
Surve no 49 at Nandkhurd Tal Erandol Dist Jalgaon
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Exempted
DIU Jalgaon Prakalp Sanchalak Atma
6 Feb 2026
23 Sept 2025
4 Nov 2025
23 Sept 2025
3 Nov 2025
23 Sept 2025
23 Sept 2025 - 7 Oct 2025
7 Oct 2025
Amount
CIVIL WORK
Excavation for foundation in earth, soil of all types, sand, grave land soft murum, including removing the excavated material upto adistance of 50m. beyond the building area & stacking and spreading as directed, de watering, preparing the bed for the foundation and necessary backfilling ,ramming, watering including shoring and strutting etc. complete.(Liftupto 0 to 1.50m.) By Mechanical Means
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/quartzite/gneiss metal in foundation including necessary form work, compacting and curing etc, complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand/VSI sand finely washed etc)
Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc, complete.
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc, complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grad
Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Filling in plinth and floors with contractors aterial/brought from outsideand approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.
Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.
Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.).
Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken )
Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete.
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm espectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete
Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.
Providing and Fixing 110 mm diameter PVC Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete.
Shooting of still photograps outdoor and indoor of construction and other works of building , bridges, roads etc. in District and outside dist. At any distances ii) a set of same three copies of 4 ' x 6 ' Size
ELECTRIFICATION WORK
Supplying, erecting & terminating FR XLPE insulated , galvanised steel wire armoured cable 1100 V, 4 core 10 sq. mm. copper conductor FROM TRANSFORMER TO MAINS continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated , galvanised steel wire armoured cable 1100 V, armoured cable 4 core 6 sq. mm. copper conductor FROM MAINS TO DB continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/pipe as per specification no. CB-LT/CU
tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW- EXNCTR and attached drawing including RCC pipe of 6" dia with collar at road crossing.
Making trench of suitable width and depth 1 mtr in soft soil laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR and attached drawing.
Supplying and erecting PVC unarmoured cable 1100Volt grade ISI mark 3 core / 2.5 sqmm stranded solid copper complete erected on wall/ trusses with duly painted G. I. Saddle FOR INDOOR FLOOD LIGHTS and OUTDOOR STREET LIGHTS from MCB DB to lighting fittings and making proper connection with glands and lugs as required.
Point wiring for 6A / 16A plug point with PVC Insulated PVC Round Sheathed stranded 3X4 sq.mm. (56 no./0.3mdia) copper conductor FRLS wire of Voltage grade upto 1.1 kv in PVC conduit of FRLS grade of appropriate size and clipped with saddle , clamps with GI screws on wall with colour coding WIRE R-B-G as required as per specification no. WG-MA/CON and WG-MA/BW
Supplying and errecting shockproof 6pin 6A and 16 A with switches 16 A combine Unit errected on metal box / modular box surface mounted industrial type as required.
Supplying And errecting integrated LED flood Light fitting max. 30W IP65 & IK07 class having pressure die cast alluminium housing, having system lumens output of Min. 3000 Lumens , min. efficacy of 100 lumen/W , CRI >70, CCT upto 6500K ,THD <10%, PF >0.90 , operating range of 140-270V , inbuilt surge protection of 4KV, LIFE CLASS OF 50000 Hrs. atL70B50, including driverwith U shaped bracket with 3 years warrantyas per specification no. FG-ODF/FLS2 complete errected on trusses with fixed with suitable GI clamps complete as required.
Supplying And errecting integrated LED street Light fitting max. 26 to 30W IP65 & IK08 class having single piece pressure die cast alluminium housing, having system lumens output of Min. 2600 Lumens , min. efficacy of 100 lumen/W , CRI >70, CCT upto 6500K ,THD <10%, PF >0.95 , operating range of 140- 270V , inbuilt surge protection of 10 KV, LIFE CLASS OF 50000 Hrs. atL70B50, including driverwith U shaped bracket with 3 years warrantyas per specification no. FG-ODF/FLS2 complete errected on wall with GI pipe of appropriate dia. fixed with GI clamps complete as required.
Supplying and errecting tripple pole and neutral distribution board (TPNDB) , SPMCB of 8 ways/phase (24 poles), with door, 1.2 mm thickness surface/ flush mounted, IP43 protection on iron/ GI frame (horizontal bus bar type) as per specification no. SW-SWR/MCBDB as required
Supplying, errecting and commissioning of 4 POLE RCCB 40 A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SWRCCB/ RCCB in provided distributioon board as per specification no.
Supplying, errecting and commissioning of following SP MCCB 6A to 32 A , C-series with rated short circuit breaking capacity (Icn) 10 KA in provided distribution board with accessories like bus connectors, screws etc as per specification no. SWSWR/ MCB; 1) SPMCB 6/10A :18 NOS, 2) SPMCB 16 A:6 NOS
Supplying, errecting and commissioning of following 4 pole RCCB 63A 1 NO) AND 4 POLE RCCB 40 A (02 NOS) electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB with distributioon board 1.2mm thickness surface / flush mounted, IP43 protection on iron/ GI frame as per requirement.
Providing , earthing with galvanisediron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA/EP and as per attached drawing
Providing pipe type earthing with 40 mm dia. GI pipe or 20 mm dia. GI rod complete with all materials, testing & recording the results as per specification no. EA/EP and as per attached drawing.
ROYALTY CHARGES
Other Minarels
LAB TESTING
Sand- Fineness Modulus,silt and clay content
Aggregate/Crush material a) Carrying out water absorption b)specific gravity c) Impact Valued) Crushing Value
Cement- Cement- Standerd Consistency,fineness, , Setting Time (Initial And Final), compressive strenght, soundness
Concrete M10 Grade- Concrete cube Compressive Strength (set of 3 cubes)
Concrete M20 Grade- Mix design M20 with all tests on besic materials
Concrete M20 Grade- Concrete cube Compressive Strength (set of 3 cubes)
TMT steel bars- Steel - Tensile strength ,Yield stress, ultimate tensile stress, %elongation, weight per running meter,Bend/Rebend test.(Set of 3 Bars) upto 16 mm (set of 3 bar)
Murum plasticity Index, fild density of copacted layer, proctor test
Bricks: Crushing Value, Absorption Value, Specific gravity
ESHS PLAN
ESHS (Environment Safty and Health Management Labour Facilities (Lump- Sum Amount )
SBD INFRA-TECH PRIVATE LIMITED (BID ID -6970258)
Shri Onkar Arun Patil (BID ID -6946529)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
sarvadnybiddoc.pdf
Tender Documents • 1.06 MB
BOQ_2107186.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid