Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.3 LAccepted-AOC | L-1 | Accepted-AOC Agreement signed | |
| 2 | L-2₹10.3 L+₹6,342.50 (0.62%)Rejected-Finance | L-2 | Rejected-Finance 2nd lowest |
Tender Value
₹11.8 L
EMD Value
₹1.2 L
Closing Date
30 Nov 2021, 11:00 amClosed
Executive Engineer
Office of the Executive Engineer Irrigation Division Kanpur Dehat
Repair and Repainting of Mau minor from km 1.000 to 2.000
2021_UPIDC_646588_8
03/ee/2021-22
Open Tender
Civil Works
Item Wise
30 days
Kanpur Dehat
As tender condition
2 documents required · 2 mandatory
₹856
₹1.2 L
9 Dec 2021
24 Nov 2021
30 Nov 2021
24 Nov 2021
30 Nov 2021
24 Nov 2021
Amount
Cleaning jungle including uprooting of rank vegetations grass, wood trees and saplings of girth upto 30 cm measured at a height of 1 meter above ground level & removal of rubbish upto a distance of 50 meters out side the periphery of area cleared.
Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53 mm gauge) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the granular surface cleaned with mechanical broom as per technical specification clause 503
Providing, laying and rolling of open-graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in Hot Mix plant, laying and finishing with paver finisher and compaction with three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by Seal Coat 'Type-C' as per MORD Technical Specification Clause 508
Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using 'Type-C' as per Technical Specification Clause 510
M/s. Jay Enterprises
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .