COMPREHENSIVE MISC REPAIR, MAINT TO MRC, OTHER UNITS AND REPAIR, MAINT OF HARD STANDING , APPROACH ROAD, DRAIN ETC., IN MRC UNDER GE SAUGOR.

Amount

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry with all qoins arches , pillars etc built in cement mortar and removing rubbish from site complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed .

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

M&L for preparing the old decorated surfaces and applying two coats of white wash on walls complete all as specified and directed

M&L for prepration of new wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer including preparation of surfaces of walls complete all as specified and directed

M&L for complete removal of existing treatment on wall and prepration of old surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls complete all as specified and directed

M&L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed Make:- Asian Ace or equivalent make as approved by GE

M&L for applying one coats exterior weather coat including preparation of surfaces of old walls complete all as specified and directed Make:- Asian Ace or equivalent make as approved by GE

M&L for applying three coats of white wash on newly plastered ceiling surface including preparation of surfaces complete all as specified and directed .

M&L for applying two coats of white wash on old decorated ceiling surface including preparation of surfaces complete all as specified and directed .

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces finished even & smooth without using extra cement joints to be filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding and rubbish off the premises complete all as specified and directed

M&L for glazed coloured ceramic tiles of size 450mmx 300mm x 7mm to 8mm thick , joint free (rectified) on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed .

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm but not exc. 0.36 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment tocomplete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm but not exc. 0.36 sqm as in skirting, dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed

M&L for 600mmx600mmx 8mm to 10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 600mm x 600mmx 8mm to 10 mm thick coloured vitrified tiles as in skirting , dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent make as approved by GE) 10mm thick laid over and including 15mm rendering in CM(1:6) set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor complete all as specified and directed

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 25mm thick uniformly levelled surface of stone dust cushioning complete all as specified and directed .

M&L for 18mm to 20mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like laid over and including 15mm thick cement mortor 1:4 set jointed in neat cement slurry with fastners including pointing in white cement mixed with pigment to match shade of the slabs complete all as specified and directed

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed

M&L for PCC 1:2:4, type B0 ( using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed

S&F GI ( cold rolled) snap grid size of 600mm x 600mm frame work of 24mm x 38mm x 0.60 mm, Tee Section ( bottom pre coated ) and 24mm x 24mm x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F white non Asbestos designer ceiling cement boards 4 mm thick including demolition of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness with frames complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregates) etc as in flooring including providing contraction joint of size10mmx65mm as specified and gap filled with bitumen Grade A & finishing the surface even and fair without using extra cement complete all as specified & as directed .

M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of stone masonry, built in cement mortar with all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in surface channes of drain complete all as specified & directed

M&L for rendering 20 mm thick cement plaster in cement mortar 1:4 on brick work/stone/concrete surfaces finishing the surfaces even and fair complete all as specified and directed

dipangashu barick and associates

v k builder

M K Construction

maharaja construction and suppliers