Supplying, Installation, Testing and Commissioning of High Mast Flood Lighting, other related electrical and ancillary works at Chowkidingi at Dibrugarh.

Amount

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.*125 A,36KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.*400 A,50KA,FPMCCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.* Single pole

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. *Above 10.00 metre and upto 12.00 metre

Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required,curing etc as required. (volume of pole/ pipe not to be deducted)

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts,washers etc. as required.

Supplying of two lengths of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) double pole cross arm for three wire 33 KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts, washers etc and painting with primer and finish paint as required .

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.*Above 35 sq. mm and upto 95 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.* Above 95 sq. mm and upto 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.* 3½ X 70 sq. mm (38mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.* 3½ X 150 sq. mm (50mm)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. *120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. *160 mm dia (OD-160 mm & ID-135 mm nominal)

Providing, Laying, testing & commissioning of B class medium duty G.I pipe conforming to IS 1239 Including, welding, fitings like elbows, tees, flanges, tapers nuts,bolts,gasket etc. and fixing the pipe on the wall/ceiling with suitable clam/support frame and painting with two or more coats of synthetic enamel paints of required shade complete as required:*50 mm

Providing, Laying, testing & commissioning of B class medium duty G.I pipe conforming to IS 1239 Including, welding, fitings like elbows, tees, flanges, tapers nuts,bolts,gasket etc. and fixing the pipe on the wall/ceiling with suitable clam/support frame and painting with two or more coats of synthetic enamel paints of required shade complete as required:*65 mm

Supplying, Installation and comissioning of 250 KVA 11/.433 KV, 3 phase 50 hz Dyn-11 naturally cooled, Off-load tapping system with LT enclosure, Copper Wound Distribution Transformer oil confirming to IS 335/199 as directed by the dept.

Supplying of 12 mtr (SP-66) GI pole confirming to IS:2713 for HT line

Supplying, Installation, testing and commissioning of of 11 KV CT/PT set assembly complete as required and as directed by the department

Supply, Installation, Testing and Comissioning of 11KV Gang Switch set assembly complete as required and as directed by the department

Supply installation, testing and commisioning of 11 KV DO Fuse.

Supplying and Fixing of 11 KV 10 KA Lighting Arresor set assembly complete as required and as directed by the department.

Supply, Installation, testing and commissioning of HT Trivector Meter set assembly complete as required and as directed by the department.

Load Security as per APDCL Approved Rate

Supplying of following sizes XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 650/1100 V grade conforming to IS 7098 (Part1/1988) with amedndment upto date etc. as required*i) 3.5x 150 sqmm

Supply and draw the 11KV 1CX70 Sqmm AAAC Covered conductor as required and directed by the department.

Supply and draw the 11KV tension hardware of 1cx70 SQMM AAAC Covered conductor as required and directed by the department.

Supply and draw the 11KV tension insulator of 1cx70 SQMM AAAC Covered conductor as required and directed by the department.

Supply and fitting pole clamp GI 50X6 mm as required and as directed vy the department.

Supplying and fitting PG Clamp for ACSR Raccon as required and directedc by the department.

Supply and fitting 11KV Danger Plate as required and as directed by the department.

Erection and commissioning of the above high mast with the help of crane/derrick and other suitable equipment and wiring materials of size 2.5 sqmm 3 core as directed and specified by the department .

Supply of MAN Rider suitable for 40 mtr HM for servicing of the Mast installed. high internally & externally Hot dip galvanised. As per the direction of engineer incharge.

Supply of 40 M high internally & externally Hot dip galvanised Stadium mast shaft in Five sections , thickness from bottom 8,8,6,5,4mm. respectiely, Top A/F - 350 mm and bottom A/F - 950 mm. Base plate of 1180 mm, 40mm ( thk ) shall be welded (inside & outside) with shaft, mast suitable for 26 nos LED Flood Luinaries. ( Luminais price not include) in Asymetric arrangments. High mast intrnal accessories Winch, SS wire rope , integral power tool motor, lightening finial .Aviation light including supply of foundation bolt set with anchor and temp plate, bolt size M39X1200, 20 Nos. as per the direction of engineer incharge of the department.

Supplying of following size of PVC/XLPE inulated and PVC Sheathed r, XLPE insulated core laid Up, PVC tape inner sheathed, Armour (copper) for single core upto 4 sqmm of 3 Crore balance all galvanised steel strip, extruded PVC type ST2 Sheathed, 650/1100 v grade as per IS 7908 (Part1) 1988 armoured UG Cable , as specified and directed by the deptt .

Supplying of following size of PVC/XLPE inulated and PVC Sheathed 1.1 KV Grade Solid Alumunium conductor up to 10 sqmm balance stranded condutor, XLPE insulated core laid Up, PVC tape inner sheathed, Armour (Alumunium) for single core upto 50 sqmm of 3 Crore balance all galvanised steel strip, extruded PVC type ST2 Sheathed, 650/1100 v grade as per IS 7908 (Part1) 1988 armoured UG Cable , as specified and directed by the deptt .

Supplying of following size of PVC/XLPE inulated and PVC Sheathed 1.1 KV Grade Solid Alumunium conductor up to 10 sqmm balance stranded condutor, XLPE insulated core laid Up, PVC tape inner sheathed, Armour (Alumunium) for single core upto 70 sqmm of 4 Crore balance all galvanised steel strip, extruded PVC type ST2 Sheathed, 650/1100 v grade as per IS 7908 (Part1) 1988 armoured UG Cable , as specified and directed by the deptt.

Supplying of following size of PVC/XLPE inulated and PVC Sheathed 1.1 KV Grade Solid Alumunium conductor up to 10 sqmm balance stranded condutor, XLPE insulated core laid Up, PVC tape inner sheathed, Armour (Alumunium) for single core upto 150 sqmm of 4 core balance all galvanised steel strip, extruded PVC type ST2 Sheathed, 650/1100 v grade as per IS 7908 (Part1) 1988 armoured UG Cable , as specified and directed by the deptt .

Supply, Installation, testing and commissioning of 960w LED sports flood light luminaries Lighting Technologies FIRMUS LED Floodlight luminaire with system power [960W ± 5%], color temperature (5700K ± 355K), made of Pressure die cast aluminium (PDC) housing with driver and optical compartment separated in same housing with airgap for natural air flow for Thermal isolation & Powder coated by Corrosion resistant Nano coating technology. The fixture should be provided with a injection moulded UV stabilized Polycarbonate cover & Lens optics with narrow/ medium/wide beam angle options as per requirement e for optimum light spread and required uniformities in spoers fields. Inegral encapsulated high efficiency electronic driver having a Aluminium extrusion construction with rated voltage of 140-270V, power factor > 0.95, THD < 5%, IP66 protection, Inbuilt surge protection of 10KV, has mis wiring, Over voltage, Short circuit, Reverse Polarity protection, Input over Voltage cut-off at 320V with Auto Recovery feature. Also upgraded with integrated IP67 protected SPD of 20KV/10KA surge protection & Line-Line 440VAC Withstand capacity up to 4Hrs. Luminaire has a Ingress protection of IP66 and Impact Resistance of IK08. The luminaire lumen output > 120LPW CRI of 70 . The LEDs used have a life of 50000 burning hrs Lumen maintenance as per L70. Suitable for Cradle mount application. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, ROHS compliant, BIS Certification for Luminaires & Drivers

Supply, installation ,testing and commisioninging of 250 KVA, 415 volts(3-phase) DG set , mounted on a common base, complete with fuel tank, battery and leads, AMF control panel, residential silencer, first fill of tube oil, AVM pad, Acoustic enclosure, Electronics governing system etc.as required and as specified by the deptt.

Construction of 250 KVA Transformer RCC Platform of size 2000x 2000 mm of height 2700 mm (as per detailed drawing and estimated enclosed) following the latest general specification as directed by the department.

Construction of 250 KVA D.G SET RCC Pad of size 5200 x 2600 x1000 mm (as per detailed drawing and estimate enclosed) following the latest general specification as directed by the department

Construction of RCC foundation for 40 m sports high mast SET platform of size 5200 x 2600 x1000 mm (as per detailed drawing and estimate enclosed) following the latest general specification as directed by the department

Assam Electricals