Electrical load enhancement of KARNATAKA STATE SEEDS CORPORATION on Sy No. 104A, 10 of Bidar Industrial area Existing sanctioned load 40 HP, proposed additional load 100 HP, total required load 140 HP

Electrical load enhancement of KARNATAKA STATE SEEDS CORPORATION on Sy No. 104A, 10 of Bidar Industrial area Existing sanctioned load 40 HP, proposed additional load 100 HP, total required load 140 HP

supplying RCC pole 9Mtr long 150 KG WL (dwgNo bescom/gm/QS&S /02-dtd 24/11/2018as per TS 785

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8

Mtr depth( Pno44 Item No 30.2.02)

supplying pre strussed tubler spun pole 11Mtr long 500KG WL (dwgNo bescom/gm/QS&S /45-dtd 24/11/2018as per

Digging of Pit 2.2 Mtr depth for erection of 11 Mtr Long RCC/PSCC supports as per approved Drawing(

Erection of PSCC Pole 11 Mtr Long 365 Kg WL in a pit of 2.2 Mtr depth

11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018

11 kV, Horizon tal Cross Arm - Galvanised Iron (GI) Material code 220020

11 kV, Special 3 Pin Cross Arm - MS (Dwg No. BESCOM/GM/QS&S/03 Dtd 24.11.2018 Material code 279013

11 kV, Special 3 Pin Cross Arm - GI Material code 280013

LT 4 Pin Cross Arm GI

Fixing of V Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing

LT ST Support 50 6 mm Flat GI

HT ST Support 50x8 mm Flat MS (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) Material code 279092

Fixing of HT/LT Single Top Support

Spiral Earth Electrode Item code 281683

Fixing of Earth Guard Stirrup

11 kV, Cross Arm with HT Top Support (glass reinforced Material code 279090

Fixing of HT/LT Single Top Support

RCC Pole Clamp - MS(Dwg No. BESCOM/GM/QS&S/30 Dtd 24.11.2018) Material code 279523

Fixing of 4 Pin double cross arm including Brace and Insulator

GUY set complete natrerial ( Pno 5 Item No 39 to 46 total 8 Items Mterial code 279650

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

11 kV Ceramic Pin Insulator (Shell only)11 kV GI Pin for 11 kV Ceramic Shell InsulatorMaterial code 283005

11 kV GI Pin for 11 kV Ceramic Shell InsulatorMaterial code 283040

Rabbit ACSR 6 3 35 mm Al 13 35 mm St Std Wt 214 Kg

Stringing of Conductor including pin binding providing jumps dead ending

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM Material code 281008

Distribution Transformer 250 KVA- 3 Phase, 11kV/433V - Stacked (CRGO) losses confirming to 5 Star rating as per IS-11171 Core with Oil as per IS-1180 (Part-1): 2014 CABLE ENTRY TYPE

Erection of Transformer & StructuresErection of 200 - 250 kVA Transformer

LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Material code 301107

LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal)Dwg No. BESCOM/GM/QS&S/08 Dtd 24.11.2018) Material code 301056

Fixing LT Distribution box for 100/250/500 kVA DTC (Excluding wiring)

LT Distribution Box for 100/250 kVA DTC with MCCB's (SMC) Material code 301060

10 kV, 5 kA Lightning Arrester Polymeric type with ground disconnector

11 kV, HG Fuse Unit with Solid Core Insulator set of 3 nos

11 kV 400 Amps DoubleBreakGOS set of 3no

DP Set (2 Pole Strucrure Kit) as per IS-1977For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9Mtr long 300KG WL -GI

Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing Structure Materials, Erection of Poles etc., complete for mounting of Transformer ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-709Part-1, Armouring strip thickness and resistivity as per I3975(150Sqmm, 3.5...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-709Part-1, Armouring strip thickness and resistivity as per I3975(50Sqmm, 4 Co...

Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any)

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Refilling the cable trenches with selected available earth from trench excavation including watering consolidation in layers of15 cm. Thickness including depositing of the surplus earth

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as perIS7098(Part2)Armouring wires dia and Resistivity as per IS-3975 ( 95 Sqmm, (54 GI Wires - 2.5 mm Dia)

Transporting Cable from Store to work spot including loading and unloading including Crane and other equipment charges if any

Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff

Heat Shrinkable Indoor Type Cable Termination Kit for PILC Cable3x95 Sqmm

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable3x95 Sqmm

Making and Fixing pot head for HT Cable onlyHeat shrinkable Type Terminations3x95 to 3x150 Sqmm

11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering...

11 KVA load breake switch with HT cable incoming and outgoing arrangements

Erection of HT metering Cubicle on Platform

GI Pipe B - Class as per IS-GI Pipe - 50 mm Dia Material code 76804

HDPE/PLB Pipe 50/42 mm

Jelly Spreading (20 25 mm) Supplying and providing jelly in thestation yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. W...

Spreading of Stone Dust Supplying and providing stone dust in the station yard or wherever required including watering, ramming, consolidating and dressing. The rate includes the cost of material, lab...

Transformer metering LBS box provided foundation taken KPWD Civil

transformer sub station fencing taken using 6 SWG GI chain link fencing with 2100mm 40 mm 4 mm thick squire tube including cwelding digging of holes in soil with GI bolt & nuts etc

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provide...

supplying and fixing of fully automatic transfer switch (ATS) pre- wired wit flexible settings and seeemless transfer between two power sources th encloser made of MS powder coated of neccessary size ...

supplying and fixing moulded case circuit breaker (MCCB)over the existing wood /panel board using neccessory screws bolt,nuts neccessory phase temprature hnadle and wiring complete .protection of over...

four pole 160A 25 KA

four pole 250 A

four pole 320-400 A 50 KA

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve indicator ON/OFF energy cross-3 with short circuit breaking capaci...

supplying and fixing Earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroler based digitel readout of percentage leakage current progra...

supplying and fixing wiring rotary switch suitable for V/M

supplying fixing and wiring 3 Phase Digitel Ammeter Voltmeter

supplying and fixing LED type panel board indicating lamp with required colour suitable for 230440VAC 50Hz 12/24V DC

supplying fixing and wring 1000/5 A 5V to 1600/5A 15VA buden class 1 cureent transformer

supplying and fixing metal clad socket set of TP&N AND Earth plug and socket for incorporating Sp and TP mcb ( without MCB) the entire plug and socket shall be mounted in a thermoplastic /powder coat...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring as per IS-694:1990...

4 sq mm / for control wiring

6 sq mm / for distribution system

10 sq mm / for distribution system

16 SQ MM / MCCB distribution

brass cable gland size 32 mm

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer...

GI/Copper strips for grounding connections, using necessary fixingmaterials as required 25 x 3 mm GI strip

25 x 3 mm Copper strip

600x600x3 mm GI plate

600 x 600 x 3 mm Copper plate

suppying and intalation is a position testing and commisioning 6 KG fire estinguisher ammonium phos phate powder -50 stored pressure type hight 435 mm diameter 160 mm with stand

supplying four bucket stand along with bucket

supplying Hand gloves

supplyoing FIRST AID box complete

supplying FIRST AID chart with lamination complete

preparing entire campus electrical drawing with taken electrical inspectorate approval etc

Providing & Laying LT Cable 95 Sqmm 3.5 Crore 21 GI Strips 4x 0.8mm

fabricating supplying and mounting MS box made out 14 SWG suitable for flour/ wall mounting fully weather proof with provision for better heat dissipation , provided with hinged front cover equipment ...

supplying and fixing angle iron angle iron frame work fabricated out of M.S angle iron and M.S flat … with bolts nuts washers etc and painted with 2 coats of approved paints SIZE 50X50X6MM

SUPPLYING 250 A 4x30x10 mm aliminium strips A rated 3 phase with nuetral busbar using required capacity electrolytic aliminium strips coverd with heat shrinkable coloured PVC sleave mounted on phenol...

supplying and fixing moulded case circuit breaker (MCCB)over the existing wood /panel board using neccessory screws bolt,nuts neccessory phase temprature hnadle and wiring complete .protection of over...

APFCR PANEL Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase 400/440 volts gradefor power factor improvement of rotating machineries like induction motor Ma...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve indicator ON/OFF energy cross-3 with short circuit breaking capaci...

Supplying and fixing Power contactor with NO/OFF contactor on existing wood/Panel boards using necessary bolts nuts washers and wiring etc complete with AC-3 Rating and as IS-13947 22- 25 Amps Make:Sc...

supplying fixing and wiring automatic power factror controler circuit fully static unit control by by 14 stage microprosser operatorrelyas LED display self programing functionfor power stagesand opera...

supplying and fixing LED type panel board indicating lamp with required colour suitable for 230440VAC 50Hz 12/24V DC

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring as per IS-694:1990...

6 sq mm / for control wiring

b. 25 x 3 mm Copper strip.

supplying and crimping copper end terminal (LUG) 25 sq mm

brass cable gland size 32 mm