Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹34.3 L+₹1.4 L (4.19%)Rejected-AOC | L2 | Rejected-AOC Not L1 Bidder | |
| 3 | L3₹36.6 L+₹3.6 L (11.1%)Rejected-AOC | L3 | Rejected-AOC Not L1 Bidder | |
| 4 | L4₹40.2 L+₹7.3 L (22.2%)Rejected-AOC A 303 VEENA CGHS LTD PLOT NO 5D SECTOR 22 DWARKA NEW DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L4 | Rejected-AOC Not L1 Bidder | |
| 5 | L5₹44.5 L+₹11.6 L (35.1%)Rejected-AOC | L5 | Rejected-AOC Not L1 Bidder |
Tender Value
₹35.2 L
EMD Value
₹70,340
Closing Date
18 Oct 2022, 6:00 pmClosed
GE U WATER SUPPLY DELHI CANTT 10
GE U WATER SUPPLY DELHI CANTT 10
MAINTENANCE REPLACEMENT OF WATER PIPE LINE OF DGNCC DID LINE AREA HARBUX STADIUM AREA HQ DELHI AREA OFFICERS QTR AT TIGRIS ROAD TOI AREA MANDIR MARG CHURCH ROAD POLO ROAD MALL ROAD PARADE CAMP AREA AND ADJOINNING AREA OF CAVILARY HILL PUMP HOUSE AREA
2022_MES_553575_1
8222/GE/WS/D-38/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE U WATER SUPPLY DELHI CANTT 10
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
GE U WATER SUPPLY DELHI CANTT 10
₹70,340
Yes
20 Jan 2023
22 Sept 2022
20 Oct 2022
22 Sept 2022
18 Oct 2022
6 Oct 2022
Amount
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick soft / loose soil complete all as specified and directed.
Removing excavated material (Soils) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and directed.
Taking up or down steel tubing from trench/wall/roof with connection including cleaning for removal complete all as specified and directed of the follwing sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Relaying/refixing only jointing and testing of old GI pipes including cleaning completely in trenches/wall complete all as specified and directed for the following sizes :- (Note: material retrived from from srl item No 4.10 to 4.60)
15 mm bore
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Supply laying,jointing and testing of GI pipe medium grade ISI marked including all fittings in old/new position as in walls/roof/trenches complete all as specified and directed of following sizes. (Note: If the new route of GI pipe taken, no credit will be issued to the contractor)
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Labour for cutting and screwing existing steel tubing for alteration or addition all as specified of the following sizes
15mm bore
20 mm bore
25 mm bore
40 mm dia
50 mm dia
80 mm dia
Taking up Cast Iron/Ductile Iron water mains (including all fittings) with spigot & socket ends and lead/tyton joints including burning out lead joints and recovering lead complete all as specified and directed of the following sizes :-
100 mm bore
150 mm bore
200 mm bore
250mm bore
Refixing/relaying only in trenches CI/DI pipes with socket and spigot ends, cleaning thoroughly and removal of all blockages if any complete all as specified and directed for the following size/bore of pipes. Note : Joints and CI/DI fittings shall be measured and paid seperately.
100 mm bore
150 mm bore
200 mm bore
250mm bore
Supplying, laying, jointing, testing and commmisioning of DI Pipe as per IS 8329, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and directed at site for the following sizes :- Note : - a) Joints shall be measured and paid separetely b) If the new route of DI pipe taken, no credit will be issued to the contractor
100 mm bore
150 mm bore
200 mm bore
250mm bore
Material and Labour for CI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and directed
Upto 150 mm bore
200 to 250 mm bore
Material and Labour for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 9523 complete all as specified and directed
Upto 150 mm bore
200 to 250 mm bore
Material and labour for Run lead joint including jointing material for CI/DI pipe of following size/bore :-
100 mm bore
150 mm bore
200 mm bore
250 mm bore
Material and labour for Rubber Gasket Joint (Tyton Joint) including jointing material for DI/CI pipe of following size/bore :-
100 mm bore
150 mm bore
200 mm bore
250 mm bore
Supply & fixing UPVC pipes in replacement of pressure rating of 10Kg/CM square fixed complete to walls, ceiling, floor or in trenches any types of pipe including fittings & jointing material to the existing of following sizes.
65mm dia
75mm dia
100mm dia
Taking up existing MS water mains of following sizes including all fittings complete all as specefied and directed.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
350 mm bore
Supplying, laying, jointing, welding & testing in replacement of MS Pipe (Heavy duty class 'C') laid in trenches or on floors for connections to centrifugal pump sets for suction, pump to header and to connect out going water main CI/DI pipe line all as directed Note:- (i) MS Flanges and Flange joints complete with jointing materials shall be measured and paid separately.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
350 mm bore
Supplying and fixing, MS flanges of following sizes of bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and directed
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
350 mm bore
Supply & fixing of Flanged Joints with rubber or fibre board gasket including nuts, bolts and double washers of following sizes complete all as specified and directed
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
350 mm bore
Supply, fixing, jointing & testing in replacement of Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
Supply, fixing, jointing and testing in replacement of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unsv NRV complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
100 mm bore
150 mm bore
200 mm bore
Supply and fixing in replacement of CI foot valve rating PN 0.2 flanged ends, swing type opration with rubber sheet, as per IS:4038 including taking out unsv foot valve complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
100 mm bore
150 mm bore
Supplying & fixing in replacement of gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778 of following sizes including taking out unsv gate valves complete all as specified and directed
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply, fixing, jointing & testing in replacement of butterfly valve (wafer type) of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, including taking out unsv butterfly valve complete all as specified and directed. Note:- Jointing material shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
M&L for painting on steel and iron surfaces with two coat of synthetic enamel paint as per existing colour scheme or pattern after preparation of old painted surface of any description over 10cm in width or girth complete all as specified and as directed
Material and labour for fixing in replacement of water pressure gauge (0-5 Kg/cm square) 100mm dia size including boring, threading, welding in CI/DI/GI of any sizes and connected with suitable size of U type MS/CP pipe with ON OFF cock complete all as specified and directed
Taking out sluice valve, foot valve, refacing, regrinding, rubber gasket changes, stem nut & bolts and refixing the same serviceable condition with flange joints including nut, bolt and double washers of following sizes complete all as specified and directed
100 mm bore
150 mm bore
200 mm bore
Supply, installation and testing of flanged ends water meter ISI marked woltman type, Class 'B' of following sizes and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv water meter complete all as specified and directed. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
200mm bore
Supply, installation and testingt of flanged ends strainer/dirt box of following sizes with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv strainer/dirt box complete all as specified and directed. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Dismentling of existing water meter,100mm bore to 250mm bore any make /model,fixed at any location and replacement of mechnical parts such as glass cover,dial guage,rotary shaft,rotating fan etc, to make it functional including making good connection with gasket rubber sheet, nuts & bolts, refixed in horizontal /inclined /vertical position complete all as specified and directed.
Dismentling of existing water meter stainers, dirt box,100mm bore to 250 bore, any make/model,fixed at any location and cleaning of jali,replacement of packing seal etc.to make it functional including making good connection with gasket rubber sheet , nuts & bolts, fixed in horizontal/inclined/vertical position complete all as specified and directed.
1/4'' inlet, capable dia 28 mtr to 50 mtr 2.8-6.9 bars with a discharge rate of 25.4 - 116 lpm. The sprinkler shall have internal seal -A- matic device which prevents low head drainage (upto 3.1m) & hence puddling & Erosion.The sprinkler shall be capable of both non reversing full circle and part circle operation in the same unit. The sprinkler shall have a non -strippable drive mechanism and permit manual rotation of the pop up stem in any direction. This shall have no effect on either or the derive or the set arc. Once the manual rotation is terminated, the sprinkler shall autoatically return the water stream to its preset arc.The arc adjustment can be performed on both the right and left trip of the sprinkler. The sprinkler shall have rotating nozzel turret indepedent of riser stem.The sprinkler shall have a pressure -activated wiper seal,1"bottom inlet. The body of sprikler shall have a double-wall contraction and made of heavy- duty, UV -resistent plastic.The sprinkler shall have 8 interchangeable nozzles having three ports for optimal close -in, mid -range and long range water distribution
Supplying & fixing in replacement of unserviceable PP/PE Service Saddle of size 90mm X 1 1/4" metalic
Supplying & fixing in replacement of unserviceable Brass QCV(Quick coupling valve)/QRC(quick release valve) of size 1-1/4"
Supplying & fixing in replacement of PTMT float valve of following sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and directed.
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Surface dressing of uneven surfaces of the natural ground, rough excavated surfaces and filled area where ordered shall be trimed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. depth of cutting not exceeding 15 cm. complete all as specified and directed
Supply & fixing in replacement of UNSV 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and directed
Supply & fixing in replacement of UNSV 'stem' made out from SS (all as per sample) of sluice valve of size as under
80 mm bore
100 mm bore
150 mm bore
Supply & fixing in replacement UNSV 'stem nut' made out from stainless steel suitable to match with existing sluice valve of sizes as under : -
80 mm bore
100 mm bore
150 mm bore
Supply & fixing in replacement UNSV 'gland plate' made out CI, suitable to match with existing sluice valve of sizes as under : -
80 mm bore
100 mm bore
150 mm bore
Labour only for attending day to day external water supply complaints of all nature i.e leakage in water supply pipe lines , fitting/fixture, over flow of overhead tank, no water supply,taking out water water from trenches during repair including noting the complaints in complaint register complete all as specified and directed. (Any material required for attending complaints shall be measured and paid separately under respective item herein after) Note :- quoted rates include notes mentioned at srl No. 1.01 to 1.08.
Notes for item No. 1.00 The complaints shall be attended and the defects shall be rectified by a team of expert and experienced electrician/plumber as applicable assisted with adequate No of helpers complete all as specified and directed
The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.Contractor rep shall be available wef 0800 hrs to 2000 Hrs to receive and notify the complained
In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made.
While attending the complaint of water supply /Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A' . However no extra payments shall be made for dewatering.
Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A.
All T & P as well as dewatering motor single phase of 3HP with including 100 mtr cable, required for attending the complaints shall be provided by the contracor.
The pipe fitter shall always be in possession of die set complete with cutters , Taps , Pipe wrench, Chain wrench,Caulking tools,Complete set of spanners and ladders etc…, as required at site.
The elecrician shall always be in possession of all Electrician tools , LT Megger, Earth tester , Multimeter , Crimping tool, insulation tape, Hand gloves etc required at site.
Supply & fixing in replacement of UNSV Tank nipple 20 mm dia
Supply & fixing in replacement of UNSV GI Socket Med grade ISI Marked of following sizes ;-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Supply & fixing in replacement of UNSV GI Elbow Med grade ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
80 mm bore
Supply & fixing in replacement of UNSV GI Union Med Grade ,ISI marked of following Sizes:-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Supply & fixing in replacement of UNSV GI Nipple of different length as per requirement, both end screwed Medium Grade, ISI marked of following sizes:-
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
Supply & fixing in replacement of UNSV PVC 'L' type Holder suitable for Aluminium rod,Float Ball etc complete all as specified and directed of following Sizes:-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply & fixing in replacement of UNSV GI Reducing socket medium grade ISI marked of the following sizes :-
25 mmx15mm bore
20mmx15mm bore
25 mm x 20 mm bore
50 mmx 40mm bore
40 mmx 20mm bore
40 mmx 25mm bore
50mmx 25mm bore
Supply & fixing in replacement of UNSV GI Tee Med grade ISI Marked of following sizes : -
15mm x15mm x15mm
20 mm x 20 mm x 15 mm
20 mm x 20 mm x 20 mm
25 mm x 25 mm x 25 mm
25 mm x 25 mm x 15 mm
25 mm x 25 mm x 20 mm
40 mm x 40 mm x 40 mm
40 mm x 40 mm x 20 mm
40 mm x 40 mm x 25 mm
50 mm x 50 mm x 50 mm
50 mm x 50 mm x 40 mm
50 mm x 50 mm x 25 mm
50 mm x 50 mm x 20 mm
Supply & fixing in replacement of UNSV GI solid plug heavy duty ISI marked of following sizes
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply & fixing Lead pig bar
Supply & fixing spun yarn
Supply & fixing 3mm thick rubber gasket
Supply & fixing lead wool
An amount of Rs 159767.00 shall be deducted from BOQ on account of schedule of credit
ASHUTOSH BUILDERS
Microsys Controls India
Ridhi engineers and builders
Ayushmat Contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .