8620 SPL REPAIRS TO BLDG NO T-57 T-58 AT SOUTH CAMPUS OF AFMC PUNE, UNDER GE (CENTRAL) PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling of Stone slabs and tiles of any description or thickness in floors, walss, aprons etc., removing serviceable tiles to store and rubbish off the premises.

M&L for Joint Free non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of Each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm , as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

S&F Joint Free glazed ceramic tiles size 300x450x 7 to 8mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick in CM (1:4) all as specified & directed by Engineer-in-charge.

M&L for vitrified ceramic tiles 8 to 9mm thick (square/ rectangular) polished, area of Each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. all as specified.

. --Ditto-- all as per item No 05 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on brick /concrete surfaces.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs one edge, such as in steps, Cooking platform, and other similar situations

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed or bedding layer of 20 mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

M&L for machine Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 10 mm thick backing coat in CM (1:4) complete all as directed by Engineer-in-charge.

Demolition of Concrete of any description and in any position not otherwise specifically provided for etc Complete.

M/L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub bases, 75 mm thick complete.

M&L for 50mm thick PCC 1:3:6 type C-1 as in plinth protection and surface finished even and smooth w/o using extra cement as specified & directed by Engineer-in-Charge.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as specified

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and Smooth without extra cement.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and fair without extra cement.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over one or two coats of putty including one coat of primer all as specified & directed by Engineer-in- Charge.

M&L Finishing walls with Acrylic Smooth exterior paint of required hade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bond distemper over one or two coats of putty including one coat of primer all as specified & directed by Engineer-in- Charge.

Complete reomval of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required hade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (First quality) complete all as specified & directed by Engineer-in-charge.

M & L for preparation of old painted steel surfaces applying one coat of PU enamel paint (First quality) exceeding 10 cm width or girth

Taking down door shutter area exc 1 sqm but n exc 2 sqm each and removing to store

Taking down door chowket or frame incl shutter area n exc 1.50 sqm Each and removing to store.

Taking down door chowket or frame incl shutter area exc 1.50 sqm n exc 4.00 Sqm Each and removing to store.

Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 65x 125 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed

Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 65x 100 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sideswith lpping/frame to match

S & F, 30 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F mild steel butt hinges minimum weight 100mm size. Mild steel cold rolled as specified & directed by Engineer-in-charge.

S&F Aluminium handle, cast type, anodiesed of size 150 mm & fix to shutter complied all as specified & directed by Engineer-in-Charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 150mm

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow.

S&F, Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F stainless steel wire 0.36mm nominal dia of wire and average width of aparture 1.40mm complete all as specified & directed by Engineer-in-charge.

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165

Supply and fix decorative type curtain rod , stainless steel, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M & L two coat of PU enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth

M and L two coat of PU enamel painting to wooden surfaces (frame & shutter) over a coat of primer incl preparation of wooden surface.Surfaces of any description, not otherwise descri-bed, over 10cm width or girth

Dismantling of water tanks and removing to store capacity of tank exc 250 and n exc 500 ltr.

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,500 ltr capacity,

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm dia pipe

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 .; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone masonary surfaces

Supplying and laying 15mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings complete all as specified.

Supplying and laying 20mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings complete all as specified.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe.

S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs

S&F in repairs bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs

S&F Viterious china White Wash Hand Basin of size 580mm x 450mm including 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long, in repairs.

S& F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats in repairs

S&F in repairs for European type water closet,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete.

S&F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device

S&F PVC connections 15 mm size with PTMT nuts to length 600 mm as in repairs

S&F in repairs CP Health faucet spray with 1.5m long pipe with wall hook & fixed in repair complete

Supply and fix in repairs Bib taps two way type , cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC damtake pipe PVC 450mm inlet etc all complete in repairs.

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, exc 150sqcm & n exc 400 sqcm complete all as specified and directed,

Dismantling of cast iron Rcc, Ac or PVC pipe jointed in CM any dia bore

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia out let.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls

S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius

S&F PVC(SWR) bends with access door of 75 mm dia, any radius

S&F PVC (SWR) bends of 110 mm dia, any radius

S&F PVC (SWR) bends of 75mm dia, any radius

(PVC (SWR) vent cowl, 100 mm dia

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc,

Pre-cast cement concrete block masonry with solid blocks, (1:5:10) type- C-1 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in mortar (1:6) complete

M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded aggregateas in foundation, filling in mass concrete for manholes & drains.

M&L for plain Cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in benching and surface channel etcComplete

M&L for plain cement concrete 1:3:6 Type C1 using 20mm graded aggregate as in coping including form work etc complete.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 450mm dia RCC pipes class NP-2 with collars laid in treches with cement joint and tested complete all as specified and directed .

S&F ,8mm thick, Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid , including Powdercoated GI snap grid frame work and hanging arragement with GI wire for false ceiling including dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.all as specified

M&L for Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Ultrablock Block 2K Suin 2 coats having 200 % elongation as per ASTM 2370 , resisting 5 bars hyrostatic pressure as per DIN 1048, crack bridging min. 2mm as per EN 1062 -7 :2004.Applying SC Ultra block 2k in two coats in SSD condiition at a coverage of 1.5 kg per sqm .Mixing of powder to Liquid in the ratio of 60:40 parts by weight complete as per manufacturers specifications.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified.

Taking down ceiling fan/ exhaust fan/ wall fans of any sweep, keeping with safe custody, repair and rewiring if required and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan, including new ceiling fan clamp assembley complete with nut, bolt, washer, U clamp, rubber real and replacement of bearing complete all as specified and as directed. Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC rigid conduits/Casing caping of suitable size totally concealed in walls /floors etcg incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.)

Supply & Fixing as in replacement of SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, incl taking down old UNSV SPN DB any type and size complete all as specified and directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V

Supply & Fixing as in replacement of MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed.

Supply and fix in replacement LED Tube light fittings wall mounted, 18 W LED 6500K with Ultra bright LED Polycarbonate Tube-light with very high efficiency provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete all as specified

M & L for Surface point wiring on wall / floor with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia / PVC Casing & Caping not less then (20 x 12 ) mm including all accessories/ fittings such as junction boxes, bends, tee, elbow etc alongwith required size Modular boxes including modular frame / cover plate suitable for mounting switches /sockets etc including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:-

One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch.

One switch socket outlet point 3 pin 5 Amps on Independent board.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane.

One 3 pin 6/5 Amp socket outlet Same board.

All as per item no. 104 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.

All as per item no 104 here-in -before but for One 3/5 pin 15 Amp socket outlet controlled by one switch indep board but below/ side the switch board in same vertical / Horzintal plane.

Taking down Earth plug/DBs of any make and type including MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified.

Material and labour for sub main wiring with two single core PVC FRLS insulated unsheathed copper conductor cable 2.5 sqmm drawing in and including PVC Casing/casing of suitable size on wall/surface on ceiling with one additional PVC wire of copper conductor of 2.5 sqmm for earth continuity conductor complete all as specified and directed by EIC.

S&F in replacement of LED light fitting surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete in all respect of 10W capacity.

Material and labour to perform core drilling on brick/masonry walls with a thickness of up to 18 inches, drilling shall crate holes with a diameter ranging from 2 to 4 inches, using suitable machinery and equipment. The contractor shall provide all necessary materials, labour, and eqpt reqd to perform the work. The contractor shall ensure that the drilling prices is executed without damaging the surrounding structure, any scaffolding, ladders, or additional support structures necessary to perform the job shall be arranged by the contractor under the job complete all as spd and directed by the EIC.

Supply and fix as in replacement of ceiling fan down rod GI pipe of 15 mm bore, duly all necessary arrangement for holding rod such as clamp, nut & bold, hole and cutting of pipe etc of size 4/6 Feet long complete all as spd and directed.

Supply and fixing as in replacement of building security LED fitting 35 Watt and above 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete along with suitable size /bore GI pipe bracked duly cut to size and bent to shape , duly painted incl necessary clamps as required to fix on concrete / steel poles incl taking old unsve light & GI bracket any type and size complete all as specified and as directedby EIC

S & F as in replacement ceiling rose Ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and directed.

S & F as in replacement modular switch 6A SP one - way 230V white ivory finish complete all as specified

S & F as in replacement modular switch 16A SP one - way 230V white ivory finish complete all as specified

S & F as in replacement modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F as in replacement modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F as in replacement two Module type stepped electronic fan regulator all as specified & directed

M&L as replacement for modular bell push,single pole,one way,6 Amp suitable for 1 module complete all as specified & directed

S & F as in replacement VTPN 4 Way DB along with 4 Pole MCCB 100 Amp 01 Nos , MCB TP 04 Nos, complete wiring all as spd and directed by EIC.

Supply & Fixing as in replacement of SPN Distribution Box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 06 way, incl taking down old UNSV SPN DB any type and size complete all as specified and directed.

Supply and fix as in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, single pole all as directed by EIC.

Material and labour for Suface sub main wiring with two single core PVC FRLS insulated unsheathed copper conductor cable 6 sqmm drawing in and PVC casing/caping of suitable size on wall/surface on ceiling with one additional PVC wire of copper conductor of 6 sqmm for earth continuity conductor complete all as specified and directed by EIC.

M&L as in replacement for earthing with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Material and labour for taking down of split type AC any type and Capacity duly storing of its refrigerant, disconnecting its both the copper tubes from indoor and out door unit carefully, taking its inner and outer unit and refixing the same in other side of wall/location as directed by EIC , duly filling of make up refrigerant as per desired pressure, minor brazing/welding in copper tubing, making all elect connections as before and testing all as spd and direted by EIC

Supply and fixing as in replacement of LED luminaire (white/warm white) 600 mm x 600 mm, 35/36 watt, 220 V AC surface/ recessed type as directed by Engr- in -Charge with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for surface/ceiling (as per site requiremt) including connecting up with driver three core flexible copper conductor cases of suitable size complete all as per sample approved by EIC.

A K ENTERPRISES (BID ID -3386292)

KSP ENTERPRISES (BID ID -3386238)

Santosh Pandurang Pise (BID ID -3386225)

Suchit constructions (BID ID -3386347)

Gauri Associates (BID ID -3386285)

REKHA ELECTRICALS (BID ID -3386021)

Suma Construction (BID ID -3385942)