Construction of public water stand post along with retaining wall

Earthwork in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m (70% all kind of soil & 30% hard rock blasting prohibited)

Stone soling dry hand packed under floor complete in all respect with in all leads and lifts as per directionand to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:3:6 (1 Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in All work up to plinth level complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying Reinforced cement concrete 1:1½:3 (1 cement : 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of centering, shuttering, finishing and reinforcement work in:-

Walls (anythickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Beams, suspended floors, roofs having slope up to15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level uptofloor five level complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Random rubble masonry/Polygonal rubble masornry (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth i/c levelling up with cement conrete 1:6:12 (1cement:6 sand :12 graded stone aggregate 20 mm nominal size) at plinth level in cement motar 1:6 (1 cement : 6 sand) including curing complete as per direction and to the antire satiafaction of the Engineer-in- charge in all lead and lifts.

C/O dry rubble masonry masonry in breast wall and retaining walls, revetment walls and parapets etc. including carriage of material in all leads and lifts complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Steel reinforcement (Tor Steel) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level as per the direction and to the entire satisfaction of Engineer-in-charge.

Stone work in plain ashlar in superstructure upto floor five level in cement mortar 1:6 (1cement : 6 coarse sand) including pointing with cement mortar 1:2 (1white cement :2 stone dust) with an admixture of pigment matching the stone shade One face dressed White sand stone complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing centering and shuttering including strutting, propping etc. and removal of form for all heights complete as per the direction of the Engineer-in-Charge.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform, Shelves (Cast in situ).

Stone tile (polished) work of 8mm thick Granite of any colour and shade for wall lining over 12mm thick bed of cement mortar 1:3 (1cement :3 coarse sand) and cement slurry @ 3.3kg/sqm including pointing in white cement complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Stone tile (Karappa Stone) work for rough surface over 12mm thick bed of cement mortar 1:3 (1cement :3 coarse sand) and cement slurry @ 3.3kg/sqm including pointing in black cement complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. (1455000000)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing of 15 mm dia bib cock long nose of Jal make item code 82362 complete with in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.

Providing, laying, jointing and testing of following dia 3 layer PP-R (Polypropylene random copolymer) pipe UV stabilized and antimicrobial fusion weld, having thermal stability for hot and cold water supply as per IS:15801-2010 complete as per direction and to the entire satisfaction of Engineer-in-Charge. (earth work in trenches will be paid for extra)

25 mm dia (PN-16)

Providing and fixing Display of particular size mentioned as per the requirment in glass and frame board with proper lightening system inbuilt complete with in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.

Steel work welded in builtup sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete as per direction and to the entire satisfaction of Engineer-in-Charge.

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfer sand/or rounded angles not exceeding 80m min girth and finished even and smooth in Cement Mortar 1:3 (1 cement : 3 sand). complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on concrete/masonry/asbestos cement/plastered surfaces under coat with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with white paint complete as per direction and to the entire satisfaction of Engineer-in-Charge.

Wiring for light point / fan point / exhaust fan/ callbell point with1.5Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable insurface/ recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete as per direction and to the entire satisfaction of Engineer-in-Charge. Group-C

Supplying errection testing and commissioning of LED 18w retrofit light lamp of any make complete with in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.