GE/PKT-13/2025-26

Amount

Surface dressing n exc 15 cm deep in any type of soil complete all as specified and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded crushed stone aggregates) with solid blocks, as in kerb ston exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified.

Surface excavation not exceeding 30 cm deep and average 15cm deep and getting out in soft / loose soil, complete all as specified.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for 25 mm thick, sand for filling under floors, spreading and levelling in layers 25 mm thick including watering and consolidation complete all as specified and as directed.

M&L for 80 mm thick Machine pressed precast concrete interlocking paver block (glossy finish with red & yellow in colour) with grey cement and pigment of shape and size as approved by GE confirming to IS 15658-2006, M-40 Grade complete all as specified and directed.

Extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms,moulds, mitered/stopped etc complete all as specified and as directed. (Note: Inner girth shall only be measured)

M&L for Providing precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in precast cover slab (for manhole etc incl all use of forms, mould or machine moulds and setting the blocks, slabs etc in cement mortar 1:4, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1. 5 metre in depth; for foundation or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed by the Engineer-in-Charge.

Excavating for each additional 1.5 m or part there of in depth beyond the first 1.5 m and getting out in Soft & loose soil complete all as specified and as directed.

Treating the bottom and sides of excavation with ANTI-TERMITE TREATMENT @5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Treating the top surface of filled earth with ANTI-TERMITE TREATMENT @5 litres of emulsion per square metre of surface ( Floor ) complete all as specified and as directed.

Treating the soil under plinth protection with ANTI-TERMITE TREATMENT @5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling or mass concrete as specified and directed

Returning, Filling in, including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and directed.

M&L for MS TMT bars of Grade Fe 500d, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

All as per srl item No. 36 here-in-before but 5 to 10mm dia in stirrups, spacers & binders etc complete complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) using 20mm graded crushed stone aggregate for Foundations, Including rafts, footings, foundation beams; plinth beams, bases for columns, etc and Mass Concrete complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for Foundations, Including rafts, footings, foundation beams; plinth beams, bases for columns complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) using 20mm graded crushed stone aggregate for Columns, pillars etc complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for Column finished fair flat surfaces complete all as specified and directed.

M&L for RCC, M-25(Design Mix) using 20mm graded crushed stone aggregate for beams, lintels, lintel Bands complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for beams, lintels, lintel bands complete all as specified and directed.

M&L for RCC, M-25(Design Mix) using 20mm graded crushed stone aggregate for Chajja complete all as specified and directed.

Use & Waste Form work for rough finished surfaces of concrete measured flat for Chajja complete all as specified and directed.

M&L for RCC, M-25(Design Mix) using 20mm graded crushed stone aggregate for roof Slab complete all as specified and directed.

Use & Waste Form work for fair finished surfaces of concrete measured flat Floor Slab,roof slab etc complete all as specified and directed.

Use & Waste Form work for edges of concrete flat n. exc 200 mm thick, complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Brickwork in half brick thick wall with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for Damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces with integral water proofing compound, including necessary form work complete all as specified and directed.

M&L for Rendring 15mm thick in cement mortar 1:6 on any faces of brick or concrete surfaces finished even and smooth without using extra cement

M&L for Rendring 15mm thick in cement mortar 1:4 mixing with water poofing compound on fair faces of brick or concrete surfaces finished even and smooth without using extra cement (Note:-WPC shall be measured and paid seperately under respective item)

M&L for Rendring 15mm thick in cement mortar 1:4 on other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces, etc finished even and smooth without using extra cement, complete all as specified and directed.

Supply only Integral waterproofing compound

M&L for 15mm thck Screed layer in CM(1:4) for laying roof membrane with water poofing compound complete all as specified and directed. ( Note:WPC shall be measured and paid seperately under respective item)

M&L for cleaning of plastered/ concrete surfaces and applying roof treatment on top of roof with APP based polymeric membrane, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) (centre core) with thermal insulation, minimum weight not less than 3.5 kg/sqm and thickness not less than 3mm, laid by torch application method with overlap 100mm on length side and 100mm on the width side as per manufacturer instructions over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 0.30 litre/ Sqm complete all as specified & directed

M&L for preparation of new plasttered/concrete surfaces of wall and Finishing walls with 100% Premium acrylic emulsion paint (exterior grade weather proof emulsion paint) of required shade having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, Alkalie & fungal resistance, dirt resistance (two or more coats applied @ 1.43 ltr/10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified & directed

M&L for preparation new plastered surfaces of walls and applying one coat of Birla/JK wall care putty 1-1.5mm thick and applying two coats of Oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three Coats of White Wash, complete all as specified and directed.

M&L for preparation new surfaces steel and applying two coats of synthetic enamle paint over a coat of Zinc Cromate primer complete all as specified and directed.

M&L for preparation new surfaces of wood and applying two coats of synthetic enamle paint over a coat of white/ pink primer over prepared surface of wood complete all as specified and directed.

S&F 105mm x 60mm Pressed steel frames for doors with one or more rebates made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed omplete all as specified and directed.

S&F 165mm x 60mm Pressed steel frames for doors with one or more rebates made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed omplete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Note: wire cloth shall be measured separately

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut,bolts, fixed with wooden/MS beads & screws etc complete all as specified

M&L for 18/19 mm thick prelaminated medium density fiber(MDF) boards glossy finish/UV finish interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shelves, shutters, cabinets, etc complete all as specified and directed.

S&F Continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed

S&F 100mm long hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate with screws, complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass of plain or figured type as required) , guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/ TD/245/01 Sheet 1/1 and CEPZ/TD-246/01 sheet No 1/2 & 2/2 including taking down old window complete all as specified and directed by Engr-in-Charge.

S&F 100mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed

S&F 200 mm long 10 mm dia aluminium tower bolt complete all as specified and directed.

S&F Aluminium anodized handle handles 150mm long

S&F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) & fixing clips of sheet, cast and extruded section & fixing bolt & sliding bolt of extruded section of size 250mm long complete all as specified and directed.

S&F MS helical door spring 150mm size, complete all as specified and directed.

M&L for mild steel work such as Bands, Straps, Hold fast, Clamps, Hooks & similar confirming with Fe-410-O or Fe-310-O.

M&L for Hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 20mm graded crushed stone aggregate as in foundation, filling and mass concrete bed of manholes, complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping, bed blocks, benching and like incl necessary formwork, complete all as specified and as directed.

M&L for 75mm thick Plinth Protection, PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base even and rough finish complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type D-2, 1 : 4 : 8 (using 40mm graded crushed stone aggregate) as in sub floors/sub bases etc. complete all as specified and as directed.

M&L for 25mm thick Cement concrete, type B-0, 1:2:4 (using 20mm graded crushed stone aggregate) as in sub floors/sub bases etc. complete all as specified and directed.

M&L for Glazed ceramic glossy digital tiles in vertical surface 450X 350X 7mm thick colored as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement to match the Shade, pattern, laying etc of tiles, over and incl 10 mm thick cement mortar 1:4 backing layer complete all as directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry @3kg/Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick backing coat in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick Granite (of approveed colour) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick CM 1:4 screed or backing layer complete all as specified and as directed

S&F tube medium grade galvanized with all fittings and fixed to walls or laid in floors of 15mm bore including cutting chasing in walls etc if required complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting chasing in walls etc if required complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of pipe 20 mm

S&F 15 mm bore long body CP Bib taps cast copper alloy fancy type with crutch or butterfly handle (chromium plated), screwed down , high pressure for iron pipe complete all as spd & directed.

S&F CP stop cock/angle valve cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed Make: Parryware,Jaquar,Prayag

S&F CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F Vitreous China table top wash basin white size 500x420x190 mm, excluding taps, waste, chain and plug and orcelain stopper but including brackets Make Jaquor, cera etc complete all as specfied.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cSqm fixed complete to walls, ceilings or in Floors etc., any type of pipe 32/40 mm dia

S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including bedding in cement mortar to dwarf wall or including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes.

S&F Soap dish, stainless steel , min size 160mmx160mmx90mm fixed to wall complete all as specified and directed

S&F 1000 Ltr cap Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including fitting such as nipple, check nut etc. all as specified

S&F 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends of radius 110mm complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bends of radius 75mm complete all as specified and directed.

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 110mm complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing/cooler stand including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M & L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC rigid concealed conduit heavy duty 20 mm dia ISI marked all fittings including anodise pressed steel sunken box with bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.

All as per Srl item No 95 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per Srl item No 95 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia ISI marked with all fittings including anodise pressed steel sunken box with bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.

M&L for point wiring with 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia ISI marked with all fittings including anodise pressed steel sunken box with bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed .

S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S&F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F LED bulb, B22 type ,14 watt,complete all as specified and directed.

S&F sleek LED Batten light fitting 4 feet long 1x20 W including complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size, 3 core complete all as required at site or directed.

S&F & testing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting with flexible copper conductor of suitable size, 3 core and including writing of MES No with black paint complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F MCB SP 240 volts any rating from 6 to 40 amps, 'B' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F MCB SPN 240 volts any rating from 6 to 40 amps, 'B' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 0.9 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

S&F sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x4 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 4 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC rigid concealed conduit of suitable size complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 450 mm sweep, heavy duty 1400 RPM complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable of suitable size from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

S & F unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing. ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sq. mm 4 core complete all as specified

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified (Note:-Punned thickness shall be measured and paid)

M&L for brick covering equal to length of bricks as mechanical protection to cable with well burnet sub class ‘B’ bricks laid as directed by the Engr-in-Charge.

S&F GI tubing light grade 80 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole including fittings /clamp complete all as specified and directed.

S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M&L for cutting/drilling of GI pipe upto 50/80 mm dia for connecting of 25/50mm GI pipe including all required accessories complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

Supply and installation of the electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts including connection with PVC pipe of suitable size (hot & cold type) including with complete connection of water including testing after installation complete all as specified and as directed.

S&F tubes medium grade galvanized with all fittings and laid in tranches, floor, along with wall/ceiling etc. of 25mm bore including cutting chasing in walls, bend, clamps, nut bolts and washers etc. if required complete all as specified and directed.

GANDOTRA CONSTRUCTION CO (BID ID -3308237)

Substantial Const. Co. (BID ID -3310012)

DABGOTRA BUILDERS (BID ID -3316401)

AV ENTERPRISES (BID ID -3310009)