GE I R AND D/CHD-02/2025-26 REPAIR/MAINT OF STEEL FURNITURE, WOODEN FURNITURE AND MISC WORKS AT DIHAR LEH.

Amount

REPAIR TO ALMIRAH LARGE STEEL:- Removing unserviceable 3 way locking device complete excluding lock & handle and supply and fixing new 3 way locking device made to shape as required complete all as specified and directed.

Removing existing unserviceable lock of almirah large steel & supply and fixing new lock of brass five levers with duplicate keys and fixing in proper functional position as original shape complete all as specified and directed

Removing of existing unserviceable handle of almirah large steel & supply and fixing new handle of CP steel heavy duty including necessary nuts, bolts, washers etc complete all as specified and directed

Removing of existing unserviceable legs of almirah large steel & supply and fixing new leg made of 1mm thich MS sheet made to shape and provideing two coats of olive green or silver grey paint over a coat of red oxide primer all as shown on drawings complete all as specified and directed

REPAIR TO ALMIRAH MEDIUM STEEL:- All as per serial item no 1.00 but almirah medium steel -ditto-

All as per serial item no 2.00 above but almirah medium steel -ditto-

All as per serial item no 3.00 above but almirah medium steel -ditto-

All as per serial item no 4.00 above but almirah medium steel -ditto-

Repair of almirah medium steel by using wooden plank of min thickness 2 inches on side of almirah and making doors using wooden ply/plank of min thickess 2 inches including 1 pair SS handle and key and lock arrangement including two key lock complete all as specified and directed.

REPAIR TO TABLE OFFICE OFFICERS/CLK STEEL :- Repair of almirah medium steel by using wooden plank of min thickness 2 inches on side of almirah and making doors using wooden ply/plank of min thickess 2 inches including 1 pair SS handle and key and lock arrangement including two key lock complete all as specified and directed.

Removing of existing old unserviceable drawers of table office clerk steel / officers and replacing with new drawer made out of 1mm thick MS sheet made to shape complete all as specified and directed

REPAIR TO TABLE TOP:- Removing existing unserviceable top of table dining Ors and providing new top of size 1920x680mm made out of 18/19 mm thick commercial block board (BWR) medium density covered with 24 gauge aluminium sheet 12 Nos screws wood steel CSK of sizes 40mm for fixing the table top all as shown in drgs complete all as specified and directed

Replacement of unserviceable top of table office officer/ clerk/ typist steel, teapoy varandhah, table 900 x 900 x 760 mm steel (with or without drawer) and table 900 x 900x760mm steel with new 18mm thick prelaminated particle board (exterior grade) one side decorative choice lamination and other side balancing white with teak wood beading 4mm thick alround the top complete all as specified and directed

REPAIR TO CHAIR TUBULAR WITH ARMS /WITHOUT ARMS:- Removing existing unserviceable seat from chair tubular steel with arms supply and fixing new seat made of hard wood (teak) duly canned with 2mm wide half round white plastic cane of brand "Shah" in Godrej Pattern cross bands and borders, fixed with suitable nuts, bolts and washers as shown in drgs complete all as specified and directed

Removing existing unserviceable seat from chair tubular steel without arms supply and fixing new seat made of hard wood (teak) fixed with nuts, bolts washers etc duly canned with 2mm wide half round white plastic cane of brand "Shah" in Godrej Pattern cross band and borders as shown in Drgs complete all as specified and directed.

Provision in replacement of flat iron stiffener two numbers at required place on each chair tubular steel size 430 x 25x 3mm to rest the seat. Flat iron shall be fixed with gas welding complete all as specified and directed

PAINTING:- Material and labour for denting where ever required making the surface smooth after removing the old paint, filling putty at required places and material and labour spray paint (two coats of synthetic enamel paint) externally to almirah large steel of OG/grey/white shade of 1st quality synthetic enameled paint make : Shalimar /Johnson/ Nicholson make and brand as approved by GE complete all as specified and directed

All as per serial item 17.00 above but internally and externally both -ditto-

All as per serial item 17.00 above but almirah medium steel -ditto-

All as per serial item 17.00 above but both internally and externally -ditto-

All as per serial item 17.00 above but locker steel (internally and exteranally) -ditto-

All as per serial item 17.00 above but table office officer -ditto-

All as per serial item 17.00 above but table office clk -ditto-

All as per serial item 17.00 above table dining OR's (Steel portion only) -ditto-

All as per serial item 17.00 above but table 900 x 600 x 760 mm steel (with or without drawer) -ditto-

All as per serial item 17.00 above but Chair CBA steel with arms -ditto-

All as per serial item 17.00 above but Chair CBB steel without arms -ditto-

CHAIR DINNING:- Taking out existing unserviceable broken wooden rear leg from chair dining and supply & fixing new leg of required size and shape made of seasoned teak wood as shown in drg complete all as specified and directed

All as per serial item no 28.00 above but front leg -ditto-

All as per serial item no 28.00 above but rail of seat duly holed for canning -ditto-

All as per serial item no 28.00 above but back member -ditto-

Polishing of chair dining with french polish completed all as specified and directed.

CHAIR WRITING / CHAIR EASY:- Taking out existing unserviceable / broken wooden real leg from chair writing and supply and fixing new leg of required sizse and shape made of seasoned teak wood, all as shown in drgs and as directed.

All as per serial item no 33.00 above but front leg -ditto-

All as per serial item no 33.00 above but rail of seat duly hold for canning -ditto-

All as per serial item no 33.00 above but back member of chair writing -ditto-

All as per serial item no 33.00 above but arm rest of chair writing -ditto-

Polishing of chair writing with french polish completed all as specified and directed.

Repair/replacement of old wooden/iron,wheeled /non wheeled chair with new chair complete all as specified and directed Note-model ,colour of chair will be decided by Engineer-in-charge available in leh market.

TABLE DINING SIX/EIGHT PERS:- Taking out existing unserviceable / broken wooden real leg from table dinning 6 pers / 8 pers and S&F new leg of required size and shape made of seasoned teak wood as shown in drgs complete all as specified and directed.

All as per serial item no 40.00 above but front/back rails of table dining (8 Persons) -ditto-

Polishing of table dinning 6/8 person with french polish completed all as specified and directed.

TABLE CENTRE:- Taking out existing unserviceable / broken leg from centre table and supply and fixing new leg of required size and shape made of seasoned teak wood as shown in drgs complete all as specified and directed

All as per serial item no 43.00 above but front/rear rail -ditto-

Polishing of table centre complete with french polish complete all as specified and directed.

PEG TABLE:- Taking our existing unserviceable/ broken leg from peg table and S&F new leg of required size and shape made of seasoned teak wood as shown in drgs complete all as specified and directed

All as per serial item no 46.00 above but side rail -ditto-

All as per serial item no 46.00 above but front/rear rail -ditto-

Polishing of table peg with french polish complete all as specifed and directed.

BED PLYTOP:- Taking out existing unserviceable / broken head board from bed ply top and supply and fixing new head board. Frame of the head board shall be made of teak wood duly covered wit 6 mm thick plywood one side teak faced (ISI Marked) in front & 6 mm thick commericial ply wood (ISI Marked) in back, with beading of required size alround the head board made of teak wood as shown in drgs complete all as specified and directed

All as per serial item 50.00 above but foot board -ditto-

All as per serial item 50.00 above but ply wood top 12 mm thick commercial, 7 ply BWR Gde tupe BB ISI Marked of approved make on the top of bed, shown in drawing -ditto-

Polishing of bed plywood top /bed newar with french polish complete all as specifed and directed.

Removing of existing unserviceable broken cane of various furniture articles, cleaning of holes, recanning of there articles with white colour plastic cane 2mm wide 0.3 mm thick half round with beading of 4mm wide plastic cane partially rounded & cross bands at centre to centre of seat. Canning shall be as per Godrej parttern shown on drgs complete all as specified and directed. Cane of Shah/ Kohinoor make.

Removing existing unserviceable / broken top ot tables of different size and supply and fixing new tops of prelaminated particel board 18/19mm thick interior grade of natural teak face prelaminated one side with declorative choice lamination and other side balancing white provided with 4x18/19 mm teak wood beading alround and fixed with screw wood steel of appropriate size as shown on drg and duly polished with french polich complete all as specified and directed

REPAIR TO SOFA SETS:- Removing of exisitng old unserviceable legs from sofa sets and supply and fixing new legs of seasoned teak wood duly polished as per drg complete all as specified and directed

All as per serial item no 56.00 above but arms -ditto-

All as per serial item no 56.00 above but front/back long rail of 3 seater -ditto-

Removing of old unserviceable cloth from sofa cushion and supply and fixing new tapestry cloth (upholstrey) as approved by GE/Engr-in-Charge. The cost of tepestry cloth not less than Rs 250/- per mtr complete all as specified and directed

Removing of old unserviceable cushion of sofa set and supply and fixing cushion of size 560 x 530 x 100 mm of cool foam of 32 density duly covered with best quality tapestry cloth as approved by GE/ Engr-in-Charge. The cost of tepestry not less than Rs 300/- per mtr. Cushion shall be make of : Sleepwell /Kurlon complete all as specified and directed

Polishing of sofa set 3/5 seater with french polish complete all as specified and directed

Polishing of sofa set single seater with french polish complete all as specified and directed

CHAIR COMPUTER / REVOLVING :- Removing of old unserviceable rolling wheel and supply and fixing of new wheel of Godrej make complete all as specified and directed

Removing of old unserviceable revolving, tilting mechanishm and supply and fixing of same of Godrej make complete all as specified and directed

Removing of old tapestry /rexine cloth of seat & back of chair and supply and fixing (upholstery) of new tapestry cloth / rexine of existin cushion not less than Rs 200/- per mtr complete all as specified and directed

CHAIR DINNING LONG BACK:- Removing of old unserviceable rear legs with back and supply and fixing of new legs with back of seasoned teak wood complete all as specified and directed.

All as per serial item no 66.00 above but front leg -ditto-

All as per serial item no 66.00 above but rails -ditto-

Removing of old tapestry cloth and foam of cushion for both seat and back of chair and supply and fixing (upholstery) of new tapestry cloth and foam of cushion make 50mm thick of 32 density of Make - Sleepwell / kurlon complete all as specified and directed. Note :- Cost of tapestry cloth should not be less than Rs 350/- per mtr as approved by Engr-in-Charge.

Polishing of chair dining long back with french polish, complete all as specified and directed.

Modification / conversion of charpoy GI pipe & Nylone Neewar into hard ply top by providing 12mm thick ply wood, ISI marked, BWR grade, commercial both side.including High Density PU Foam min of 6 inch thick Mattress with 36 month warranty Comfort level : Extra Soft Make :- Sleepwell/Kitply/ Century/ National of size 1950 x 900 mm complete all as specified and directed

M/S HIGHLAND ENGINEERING (BID ID -3328933)

TRISHUL ENTERPRISES (BID ID -3328547)

national engineering (BID ID -3329333)

MM ENTERPRISES (BID ID -3328453)

RND ENGINEERS & CONTRACTORS (BID ID -3329276)

Takshos Enterprises (BID ID -3329013)

M/S SHAH AND SHAH CONSTRUCTION (BID ID -3328927)