REPAIR/REPLACEMENT OF INTERNAL WIRING, FITTING AND FIXTURE IN OTM ACCN AT CME

Amount

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. all as directed.

M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc for the following :-

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No . 2 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

S & F in replacement switch piano, flush type, single pole one way 5 amps complete all as specified and directed.

S & F in replacement switch piano, flush type, single pole one way 15 amps complete all as specified and directed.

S & F in replacement bell push flush type single pole one way 5 amps complete all as specified and directed.

S & F in replacement socket outlet 2 in 1, 5 pin, 5 amps flush type complete all as specified and directed.

S & F in replacement socket outlet 5 in 1, 5 pin, 15 amps flush type complete all as specified and directed.

S & F in replacement switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed.

S & F in replacement ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F in replacement lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S & F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F in replacement electronic dimmers, 450W, 250V flush type on the existing phenolic laminated sheet complete all as specified and directed.

S & F in replacemnet Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed.

S&F in replacement switch Modular, one way 6 amps, 1 module with suitable plate and cover complete all as specified and directed.

S&F in replacement switch modular one way 16 amps, 1 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.

S&F in replacement socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.

S&F in replacement socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.

S&F in replacement modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.

S&F in replacement modular bell push 6 Amps 1 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.

S&F in replacement White cover plate with frame 1 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 2 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 3 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 4 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 6 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 8 module complete as per existing make and model all as specified and directed.

S&F surface and wall mounted LED batten (LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make- Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/Bajaj

S&F surface and wall mounted LED batten (LED tube light fitting 10W), extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver alongwith LED tube 10 watt and 02 Nos PVC square blocks incl taking down old UNSV fitting. Make- Havells cat No ENDURALINEARNEOBS10WLED830SPCWH or equivalent of Philips/Bajaj

S&F endura gugby NEON- IP 65 environmental friendly, ultra modern energy saving surfae mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LED 10 Watt incl taking down old UNSV fitting. Make- Havells cat No RUGBYNEONFT10WLED860SSYMTOPC or equivalent of Philips/Bajaj

S&F building security LED light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 including suitable size bracket incl taking down old UNSV one. Make - Havells cat No ENDURAPEARLSL25WLED757SASYTOPC or equivalent of Philips/Bajaj

S&F decorative wall light fittings(bracket light), CITY 3 made up of polycarbonate suitable for 10 watt LED lamp incl LED lamp incl taking down old UNSV one. Make- Havells cat No LHDL06160099 or equivalent of Philips/Bajaj

S&F in replacement LED panel 2 feet x 2 feet size 36 wattt glare free symmetrical including driver and taking down old UNSV one complete all as specified and directed. Make- Havells cat No ENDURASLIMPROPLUS2X2PLR28/36WLED840MOD or equivalent of Philips/Bajaj

S & F in replacement Photon Ultra LED Tubelight (Single Side Connection) LED Rod 20 watt Ultra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. Make- Havells cat No PHOTONULTRAE 2.01213T8SSTL20WLED865SPC or equivalent of Philips/Bajaj

S&F in replacement Octane LED Panel Round Slim 18 watt , compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver..Make- Havells cat No LHEBFCP6IZ1W018 or equivalent of Philips/Bajaj

S&F in replacement Octane LED Panel Round Slim 6watt , compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. Make- Havells cat No LHEBHDP7IZ1W006 or equivalent of Philips/Bajaj

S&F in replacement RUBY (Clear) - IP65 New generation, post-top 35 watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Make- Havells cat No RUBYPT35WLED830PSYMTOPC or equivalent of Philips/Bajaj

Supply and fixing Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light 30 watt with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations. (Note - The contractor is responsible to arrange suitable height of ladder for replacement of fitting) Make- Havells cat No JETA QUANTOPLUSFLP30WLED757SYMLENS or equivalent of Philips/Bajaj

Supply and fix Cylindro Track Light With the high power LED, CYLINDRO 15 Watt offers various luminous intensity levels from 1500-3500 Lumen which is the perfect alternate to conventional HID lamps. Suitable for 3 circuit-4 wire universal tracks. Make- Havells cat No CYLINDROTS15WLED830S3WIRE38DWHT or equivalent of Philips/Bajaj

M&L for sub main wiring with two run of 10 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 10 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

..Ditto- as per item No.39 above, but size 6 Sqmm Four runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

..Ditto- as per item No.39 above, but size 6 Sqmm two runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

..Ditto- as per item No.39 above, but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

Ditto- as per item No.39 above, but size 2.5 Sqmm two runs and with one run 2.5 Sqmm FRLSH copper wire for earth continuity.

Ditto- as per item No.39 above, but size 1.5 Sqmm two runs and with one run 1.5 Sqmm FRLSH copper wire for earth continuity.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt all as specified and directed.

S&F in replacement MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc all as specified and directed.

M & L in replacement MCB distribution board double door 415 volt, TPN 4-way, all as specified and directed.

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etcall as specified and directed.

S&F in replacement MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls all as specified and directed.

S&F load line vertical TPN distribution board 4 way including 1 incommer MCCB of 125 Amps 4 pole double door IP-43 protection, powder coated, IK08 with provision of suitable size bus bar and cable management kit complete all as specified and directed. Make : Indoasian cat part No 811888 or eqlnt in Hager/Havells/Legrand

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC complete all as specified and directed.

S & F in replacement MCB SPN 40 Amps, 230 V, AC complete all as specified and directed.

S & F in replacement MCB SPN 63 Amps, 230 V, AC complete all as specified and directed.

S & F in replacement MCB TPN 63 Amps, 415 V, AC complete all as specified and directed.

S & F in replacement MCB TPN 100 Amps, 415 V, AC complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 6 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 4 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular all as specified and directed.

M & L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iton strip of 25 x 4 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 40 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30x30 CM made of RCC 1:3:6 with suitable handle, angle iron frame of angle iron size 40 x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site all as specified in plate No 3 of SSR Part-I and directed by Engr-in-Charge.

M&L in replacement of PVC rectangular boards closed recessed of size 100 x 100 x 50mm complete all as specificed and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 175 x 100 x 50mm complete all as specificed and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 200 x 150 x 50mm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 250 x 200 x 50mm complete all as specified and directed.

M&L in replacement of LED lamp 9 watt complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 63 Amps 16 kA complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 125 Amps 16 kA complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 160 Amps 36 kA complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 200 Amps 36 kA complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 250 Amps 36 kA complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 100 Amps 16 kA complete all as specified and directed.

Supply and fix PL lamp ,2 pin ,Cross pin 18 Watt, Make:- Havells/Philips/Bajaj

ganesh electricals and airconditioners

metro electrical services

M/S kirpan Enterprises

Pritam Electro Mechanical Services

M/S. Niksun Electro-Infra Private Limited

SHREE VAIBHAV ELECTRICALS