Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹34.8 L+₹66,724.63 (1.96%)Rejected-Finance PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹34.8 L+₹71,646.40 (2.10%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
24 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Nal, Bikaner
GE (AF) Nal, Bikaner
AS DESCRIBED IN BILL OF QUANTITIES
2022_MES_560280_1
GE (AF) NAL/T-41/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE (AF) NAL BIKANER
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (AF) NAL
₹80,000
Yes
16 Jan 2023
28 Oct 2022
26 Nov 2022
28 Oct 2022
24 Nov 2022
11 Nov 2022
28 Oct 2022 - 9 Nov 2022
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified
M & L Vitrified ceramic tiles 10 mm thick polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15 mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed.
All as per item No 02 above but on vertical surfaces such as dado, skirting etc over and including 15 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified.
M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer complete all as specified.
Dismantling of stone slab and tiles of any descriptoin or thickness in floors aprons etc all as directed.
M& L for Granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry( @ 4kg / sqm ) and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including providing 15mm thick bedding layer CM 1:6 on on old concrete floor surfaces complete all as specified and directed.
M&L for Granite tiles 20mm thick machine cut, in skirting/ dado, gate pillars laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing incl 10mm thick cement plaster in CM 1:4 rough finisher surface completecomplete all as specified and directed.
Demolition of Cement Concrete (unreinforced) in ground floors and pavings nexc 15cm thickness ( below or above ground level) all as specified and directed.
M&L for 75 mm thick plain Cement concrete type D2, 1:4:8(using 40 mm graded agg) as in sub base of flooring all as specified and directed.
M & L for 30mm sand cushion, filling under floors/tiles or in foundations including watering and consolidation complete all as specified and directed. Note : Punned thickness shall be measured for payment purpose.
M & L for laying 100 mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-50 Grade with grey cement and pigment complete all as specified and directed.
M&L for Chequered cement concrete tiles with glossy/ultra finished grey cement no pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl 15mm thick cement screed bed in CM 1:4 rough finisher surface complete all as specified and directed.
M&L PCC 1:2:4 ( type B-1 using 20mm graded stone agregete ) as in sides of rounded or chamfered on edges of interlocking/chequered tiles complete all as specified and directed by Engr -in-charge.
M&L for laying 40mm thick Cement concrete type B-1, 1:2:4( 20 mm graded stone aggregated ) as in floor and paving surfaces all as specified and directed.
S&F glass dividing strips, 38mm width 3mm thick and inserted in position to conforming to design.all as specified complete all as specified and directed by Engr -in-charge.
Demolition of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge.
M&L for Providing Reinforced Cement Concrete type C1, 1:3:6 (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for plastering (external) 15mm thick cement mortar 1:4 on brick or concrete wall surface finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparing newly plastered wall surfaces and applying two coat of weather proof exterior acrylic emulsion(as per manufacturers instructions ) over one coat of primer complete all as specified and directed by Engr -in-charge.
S&F 12mm mesh wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples and fabricated as 250mmx 250mm size grating with frame fixed to walls all as specified
S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid as weep hole pipes of wall ISI marked galvanised complete all fitting ,complete all as specified and as directed.
M&L for hand packing of broken stone / boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed by Engr-in-charge.
Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified .
M&L for Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed by Engr-in-charge.
M&L for Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed by Engr-in-charge. Note :- Earth shall be specifically approved in writing by the GE.
Demolition of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry and pointed complete all as specified and directed.
Dismantling posts or struts in natural ground (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engr -in-charge.
Excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning,filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil out of defence land and making good surface all as specified & directed.
M&L for PCC 1:3:6 type C2 (40mm graded stone aggregate) filling in post holes, foundation, and other similar work complete all as specified.
M&L for Mild steel angle iron fencing posts and struts in fencing including necessary cutting , drilling , welding etc and bending to swan neck shape as required and drilling holes notching for wire etc conforming to Fe-410-0 or 310-0 complete all as specified and directed by Engr-in-Charge.
Dismantling Fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge.
S&F Galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossings with and provision of galvasnised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured)
M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engr -in-charge.
Fixing Only Concertina Coil dia 1200mm ( 9 Coil in 1 mtr) made of hot dipped GI Coating Complete all as specified and directed by Eng-in-Charge. Note : Concertina Coil of dia 600mm issued under Schedule "B" Stores.
Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames)
Taking down chowkats or frame exc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames)
Taking down shutters of any description ecx 1 Sqm but nexc 2 Sqm each
S & F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing, lock strike plate, etc complete all as specified.
S&F 30mm thick 2nd class hardwood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feathered edged) or veneered particle board medium density, wood particle board with commercial face veneers complete.
M&L for PCC 1:3:6 Type - C2 ( using 12.5 mm graded stone aggregates ) for filling in hollow portion Pressed steel door frames including making good complete all as specified
S&F MS butt hinges 100mm medium wt cold rolled & fixed to MS steel frame by welding .
S&f Alumminium handles,of size 150 mm cast type ,anodised complete all as specified
S&F 200mm long aluminum anodized barrel tower bolt of extruded section all as specified.
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
S & F Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring , fixed in floor overall length of cover plate 150mm fixing with brassor aluminium screws complete all as specified and as directed.
M&L painting two coats of synthetic enamel paints over a coat of pink primer on new wooden surfaces of girth exc 10CM , including preparation of surfaces.
S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
S&F Solid PVC sheet consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour inclusive of solvent cement and fixed at site for aluminum widdows frame as per specification and drawing complete all as specified.
S&F Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gaused Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) pintol hinges 12 x 75 mm - 2 Nos each leaf vii) 10 mm squre guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed skelton shutterof window (x) 3mm thick sheet glass ordinary quality and with oil putty in squre n exc 0.50 sqm in each pane fixed in glazed /guage skelton shutter of window xi) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed
M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
Taking down cement plaster of any description on brick/stone walll incl raking out joints hacking for key scrubbing down water all as speicifed.
M&L for 15 mm thick cement plaster in (1:6) on fair faces of brick work finishing even and smooth w/o using extra cment .
M&L for preparing new surfaces plastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer and two coat of birla white putty complete all as specified and directed by Engr -in-charge.
M&L for prepration of old surfaces of ceiling and Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of white wash on ceiling complete all as specified and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.
Demolition of Trellis work (Jafri) spacing exc 15cm , including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engr -in-charge.
M&L Providing precast cement concrete louvres and jallies set in Cement mortar 1:4 with post Type B0 1:2:4 (12.5mm graded aggregate), 40mm thick (measured solid), including all mould- ings but excluding frame complete all as specified and directed.
M&L precast cement concrete post, ornamental moulded, 75mmx75mm in section, total length of each post exceeding 45cm but n exc 60cm , type B0 (1:2:4) using 12.5mm graded stone aggregate , with grooves on two opposite sides for holding jalli 40mm thick set in cement mortar 1:6 complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
S & F 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing including necessary welding to frame with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S&F Fe-410-W(Gde-E-250) quality-B structural steel framed work as in doors frame or gates including hold fast of angle or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.
Petty repair to Steel rolling shutters system of area n exc 15 Sqm and any description including reparing of ball bearing, top cover, anchoring rod, hasp and staple,gear operated system,crank handle, chain wheel and hand chain including necessary welding, greesing etc and making the shutters complete serviceable all as per existing pattern as specified.
S&F in repairs 1.25mm laths thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.
S&F in repairs vitreous china wash down water closet (Pedested patern ) white( including fixing bolts, flushing cistern and flush pipe) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including all connected accessary complete all as specified and directed.
S&F in repairs wash basins,size 550x400mm Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F in repairs 10 Ltr Capacity PVC Valveless , syphonic action type, flushing cistern, low level , white, with inlet ball valve, float and handle including brackets complete.
S&F Bib tap cast copper alloy suitable for 15mm long body fancy type fixed in repairs complete .
S&F CP pillar tap cast copper alloy chromium plated fancy type high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe 15mm dia fancy type fixed in repairs complete .
S&F in repairs PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete
S&F 15mm bore stop cock /Angular stop cock brass cast copper with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs complete.
Dismantling water tanks of capacity exc 250 & nexc 500 Ltrs and removing store complete
S&F Rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Part-I complete all as specified and directed.
Taking up or down steel tubing and connection of 15 mm bore complete all as directed by Engr-in-Charge.
S&F 15 mm bore dia medium grade , galvanised , with all fitting and fixed complete to walls etc, complete all as directed by Engr-in-Charge.
S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms.)
S&F 20 mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in repairs .
S&F in repairs soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .
S&F in repairs Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,all as specified and directed.
M&L PCC 1:3:6 type C2 (40mm graded stone aggregate) filling in Surface channels and drains finishing the surfaces even and smooth without using extra cement complete all as specified.
S&F in repairs Wire netting (Size of mesh 12mm) of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified.
Excavating in over areas, n exc 1.50m deep and getting out in hard/dense soil.
Excavating in over areas, exc 1.50m deep and upto 3m depth and getting out in hard/dense soil.
Returning, excavated soil, filling in, including spreeding, levelling, watering and well ramming in layers n-exc 25cm thick complete all as specified.
Removing excavated material n-exc 50 meter abd depositing where directed at a level n-exc 1.5 meter above starting point complete all as specified.
M&L PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation filling & mass concrete complete all as specified.
M& L for reinforced concrete pipes, class NP3, laid and jointed complete with collars 150 mm bore laid in trenches and jointed complete all as specified.
M&L cement concrete type D2 1:4:8 (40 mm grade aggregate)as in concrete bed to drain pipes 150mm internal dia incl packing under and haunching against the pipe sides of pipe after they are and tested all as specified.
M&L providing precast cement concrete in landing ,cover slabs (for manholes etc.) chullah hoods,chajjas,water trough ,mangers,shelves and similar articale with plain faces set in cement morter 1:6 type C1 1:3:6(20 mm graded aggregate)
M&L mild steel bars 10 mm dia and over cut to length bent to shape as required including cranking bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.
Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells
M&L for RCC (1:2:4) type B1 (using 20 mm graded aggregate) as in slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and ion shelves and the like complete all as specified.
Dismantling Sign board of any shape, type, section, incl taking out 2 Nos inbuilt post embedded portion in PCC/Natural ground and making proper shape of existing post hole including necessary returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25cmwatering and securing surplus soil as required good Complete all as specified and directed by Eng-in-Charge.
S&F Stainless steel tube of 50mm dia (Grade-304) of wall thickness not less than 1.5mm including, welding, jointing Complete all as specified and directed by Eng-in-Charge.
S&F Stainless steel tube of 40mm dia (Grade-304) including, welding, jointing Complete all as specified and directed by Eng-in-Charge.
S&F Stainless steel square tube of 25mm dia (Grade-304) including, welding, jointing Complete all as specified and directed by Eng-in-Charge.
Supply, Installation, hoisting and fixing in position ACP (aluminium composite panels) of sign board made up of ACP (aluminium composite panels) sheet 3.5mm thick of any size and shape with cleat including necessary hanging arrangement of stainless steel flate, of suitable size all around, sealing with silicon joint sealent and colour as approved by GE Complete all as specified and directedby Eng-in-Charge. Make :- Alucobond / Aludecor / viva / Alstrong.
S&F high intensity prismatic retro-reflective sheeting of approved colour / shade fixed on aluminium sheet fully covered including letter writing information / logo/ with same sheeting computerised cut in white colour / shade. The letter approximately covering up to 60% area of the board Complete all as specified and directed by Eng-in-Charge. Make:- 3M, Shakti, Darkeye.
Material and labour for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any sitution / floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of weather proof emulsion paint to match with existing surfaces complete all as specified and directed by Engr-in-Charge. Note:-Unit rate of this item includes the cost of scaffolding,formwork etc. and nothing extra shall be paid on account of variation in height.
M/S BUDHRAM BISHNOI
Beenu Co. Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .