Tiruppur District Rudravathi Town Panchayat 15th Finance Tied Grant 2025-2026 - (1st Installment)

Amount

Earth work excavation for foundation and depositing on bank with initial lead and lift etc. completely I hard stiff clay, stiff black hard redearth, shales, gravelstony earth and earth mixed with small size boulders and hard gravelly soil etc., compltete as per standard specification (SS20B)

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Random rubble masonry in cement mortar 1: 5 (one cement five sand) in foundation and basement using best HBG Rough stone and Band stone with simultaneous flush pointing etc. complete complying with standard specifications and as per drawings and as directed by departmental Engineers using new rough stone & sufficient bond stones with simultaneous pointing including all cost & conveyance of materials.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supplying and erectioning steel sheet centering and shuttering including necessery supports for plain surface in foundation and basement for RCC roof rectancular or T beams, L beams, lintel and bedblock staircase waist slap and landing beam etc., with all bracing using M.S sheets spaced at 75cm C/C etc., completly complying with standard specifications.

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Supplying and fabricating and placing in position of MS or RTS rods for all rainforced works including cost of steel and binding wire and all labour for cutting and fabrication and other incidental charges etc., completly complying with standard specifications.

Ceiling Plastering in cm 1:3, 10mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Plastering in cm 1:5, 12 mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Plastering in cm 1:3, 20mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggrigate) using 6 to 12mm stone chips – 25mm tk etc., Complete.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Dadooing sides of walls with Glazed tils of size 0.15m x 0.15m x 0.006m including cost and conveyance and all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.

Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply of thousand ltr. capacity PVC water tank including cost and conveyance Complete complying with standard specifications and as directed by the departmental Engineers.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing in position colour glazed INDIAN TYPE WATER CLOSET with 'P' or 'S' trap including cost and conveyance of water closet and labour for fixing including flooring with brick jelly concrete etc., complete

Supplying and fixing of 110mm dia PVC /4kgpipes including cost and conveyence of all materials and all other labour charges and incidental charges etc., completly complying with standard specifications.

Wiring with 2x1.5 sq.mm (22/0.30) PVC unsheated SC copper cable of 1100V graded in suitable PVC rigid pipe on wall and ceiling with PVC accessories 5A F.T switch intlush with wall corered with hylum sheet of 3mm thick with painting of suitable colour for concealed P V C light/Fan point (S.D.20)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / cormpton / K.like) suitable for in candles cent lamp with 60W bulb (SD 84)

Supplying and fixing of 4 ft. 40 W tube light flu fitting complete with copper choke and condenser with TW round blow on wall and ceiling with PVC unsheated lead from terminal tube fitting. (SD 88)

Supplying and fixing of M.S. grill of approved design for Gate, doors, windows and ventilaors using necessary mild steel flats for inner and outermembers xhich should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Aadhiconstruction (BID ID -1429084)