REPAIR/REPLACEMENT OF OLD UNSV WIRING AT OTM ACCN AND MD ACCN AT SHANKAR VIHAR, BANA SINGH ENCLAVE, YOGENDER VIHAR, 18 MADRAS AND 5/11 GR UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down carefully old U/S Aluminium/Copper point wiring (light, fan, socket or power) complete including fixtures such as switches, ceiling roses, pendants, sockets, regulators, bell, etc. and making good disturbed surfaces of walls including necessary touch up the adjoining surface of disturbed area with OBD/colour wash/white wash etc. as per existing finish complete all as specified and as directed.

M&L for point wiring with, standard copper conductor of size 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including suitable concealed/existing PVC conduit medium grade and sunk in pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required colour with screws and cup washers etc. with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed for the following. Note :- The Rate is inclusive of cutting/chasing and making good distrubed surfaces in CM 1:3 and finished with the adjoining surfaces with ODB/colour wash/white wash as per existing complete. (a) One light /fan/bell point/security light point controlled by one way switch

All as per Srl item No.2 above, but for one 3 pin socket outlet 5 amps on same board

All as per Srl item No.2 above, but for one 3 pin socket outlet 5 amps point independent board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire as power point.

All as per Srl item No.2 above, but for one 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

All as per Srl item No.2 above, but for one light point controlled by two 2-way switch 230 volts.

All as per Srl item No.2 above, but for one 3 pin socket outlet, 15 amps on independent board with cable 4 Sqmm for main current and 4 sqmm as earth wire for AC point.

M&L for point wiring with multi stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through suitable concealed/existing PVC conduit including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 1.5 sqmm multi stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good the disturbed surfaces of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour wash/white wash as the existing finishes etc. complete all as specified and as directed of the following. Notes :- 1. The rate is inclusive of cutting/chasing and making good the distrubed surface in CM 1:3 and same surface to be finished with the adjoining surfaces with ODB/colour wash/white wash etc. complete. 2. At roof slab, where there is burnt/blockage in the existing conduit, wiring will be done through new PVC conduit and rates are deemed to be inclusive in above quoted item. 3. The rate is inclusive for if old wiring is normal wiring, then new wiring for modular point wiring to be done. (a) One light /fan/Bell point/security light controlled by one way switch

All as per Srl item No.03 above, but for one 3 pin socket outlet 5 amps on same board

All as per Srl item No.03 here-in-before, but for one 3 pin socket outlet 5 amps on independent board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire.

All as per Srl item No.03 here-in-before, but for 3/6 pin socket outlet, 15 Amps on independent board with cable 2.5 Sqmm for main current and 2.5 Sqmm as earth wire as power point.

All as per Srl item No.03 here-in-before, but for One 3/6 Pin socket outlet, 20 Amp on independent board with cable 4 Sqmm for main current and neutral and 4 Sqmm as earth wire as AC point cable 4 Sqmm for main current and 4 sqmm as earth wire as power point.

S&F switch piano, flush type, 5 Amps, single pole, one way complete all as specified and as directed.

S&F socket outlet, flush type, 5 Amps complete all as specified and as directed.

S&F switch piano, flush type 5 Amps single pole, two way complete all as specified and as directed.

S&F switch piano, flush type 15 Amps single pole, one way complete all as specified and as directed.

S&F socket outlet, flush type 15 Amps complete all as specified and as directed.

S&F 0-4 step type electronic regulators for ceiling fan 1200mm sweep, 240V complete all as specified and as directed.

S&F AC box with MCB 20 Amp complete with metal box and 3 Pin top plug complete all as specified and as directed. Note : Rates are inclusive of cutting/chases for mounting metal box on wall and making good the disturbed surfaces with OBD/Colour wash/ white wash and wall care putty etc, where ever required.

S&F electric bell ding dong type AC, 230 volts single phase, complete all as specified and as directed.

S&F bell push, flush type 5/6 Amps complete all as specified and as directed.

S&F Switch modular type, 1 Module, 6 Amps one way complete all as specified and as directed.

S&F Socket outlet modular type 2M, 2/3 pin, 6 Amp complete all as specified and as directed.

S&F Switch modular type 1M, 16 Amp with red indication light complete all as specified and as directed.

S&F Socket outlet modular type 2M, 2/3 pin, 16 Amp complete all as specified and as directed.

S&F Bell push modular type 1M 5/6 Amp complete all as specified and as directed.

S&F Electronic fan regulator, modular type 2M, 4 steps complete all as specified and as directed.

S&F in repairs Wall mounted LED Integrated Batten T5 20 Watt - 4Ft long White, indoor decorative PVC extruded T5 LED batten-Integrated complete all as specified and as directed.

S&F in repairs Wall mounted LED Integrated Batten T5 10 Watt-2 Ft lay White, indoor decorative PVC extruded T5 LED batten -integrated type complete all as specified and as directed.

S&F in repairs batten holder PVC insulated body complete all as specified and as directed.

S&F in repairs LED lamp 12 Watt re-chargeable complete all as specified and as directed.

S&F ceiling rose surface bakelite 60x 25 mm, two to three terminals complete all as specified and as directed.

S&F in repairs wall mounting 12 Watt LED decorative wall light fixture made up of Polycarbonate, with suitable connections complete all as specified and as directed.

S&F in repairs 10 Watt LED bulk head fitting in engineering plastic housing with clear prismatic diffuser, WHITE including all accessories, connecting up twin core flexible copper conductor cable complete all as specified and as directed.

S&F in repairs LED building security light 40 Watts inclduing new brackets etc complete all as specified and as directed.

S&F in repairs surface mounted round shaped LED downlighter durable housing with aluminium heat shrink diffuser to give glare free light 12 watt LED 6000K/6500K lamp type from ceiling of stairs/common areas complete all as specified and as directed.

S&F in repairs recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light and glare free symetrical ilIumination suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling and making good disturbed surface/POP ceiling to match and getting electrically connected complete all as specified and as directed.

All as per Srl item No.28 here-in-before, but 40 watt 1' x 4'.

All as per Srl item No.28 here-in-before, but 1' x 1'.

S&F in repairs sheet metal enclosure V TPN 4 way Double door DB, IP-43 protection bus bar neutral link earth bar and din rail with gasket etc. complete all as specified and as directed.

S&F in repairs MCCB 125 Amps, 4 Pole, 415 Volts with 16 KA rupturing capactiy including electrical connection with bus bar or incomer with appropriate size of aluminium lugs and insulation packing etc. complete all as specified and as directed.

S&F in repairs sheet metal enclosure for DB's, where MCB's to be used Single pole and Neutral 12 way, 240 volts, double door bus bar neutral link,earth bar and din rail with gasket etc complete all as specified and as directed.

S&F in repairs sheet metal enclosure for DB's, where MCB's to be used Single pole and Neutral 08 way, 240 volts, double door bus bar neutral link,earth bar and din rail with gasket etc complete all as specified and as directed.

S&F in repairs MCB SPN 'C' curve 40/63 Amps 240 Volts, 10 KA including electrical connection with suitable size of thimbles etc complete all as specified and as directed.

S&F in repairs MCB SP 'C' curve 06 to 32 Amps 240 Volts, 10 KA including electrical connection with suitable size of thimbles etc complete all as specified and as directed.

S&F in repairs MCB SP 'C' curve 40 to 63 Amps 240 Volts, 10 KA including electrical connection with suitable size of thimbles etc complete all as specified and as directed.

M&L in repairs Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering, all as shown in Electrical Plate No.05 of SSR-2009 (Part-I) and connected to earth test point including testing on completion complete all as specified and as directed.

Taking down and re-fixing electronic/pre-paid meter in meter box with consultation with pre-paid meter authorities including necessary connections of incoming and out going cables for light and power complete all as specified and as directed.

S&F in replacement submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked, drawn through and including PVC conceiled conduit of size 25mm dia complete all as specified and as directed. Notes:- (i) Phase should be Red/Yellow/Blue, Neutral should be Black and Earthing wire should be of Green colour. Two runs of cable for 3 phase, neutral and one run of earth wire will be measured and paid as one unit length. (ii) The rates are inclusive of cutting/chasing and making good the disturbed surfaces in CM 1:3 and finished with OBD/Colour wash/White wash etc. as per existing surface complete.

S&F in repairs Electric BLDC fan controller PCB with short cuircuit protection power 440V suitable for onground BLDC ceiling fan 1200mm Sweep complete all as specified and as directed.

S&F in repairs Exhaust fan motor Light duty Meta body 300 mm Sweep (1400 RPM) complete with blades and accessories 230 V complete all as specified and as directed.

S&F in repairs U clamp with rubber real for hanging ceiling fans of 1200/1400mm sweep as per sample complete all as specified and as directed.

M&L for Rewinding ceiling fan with copper wire of 1200/1400 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with super enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying varnish drying of varnish and assembling of fan including replacement of gun metal bush, ball bearing where ever required complete all as specified and as directed. Note : Gun metal bush, clamp, shaft, rod, bearing shall be measured and paid separately with respective items.

S&F in repairs Down rod of 1.5 feet length fabricated out of MS pipe 12mm dia heavy duty, duly painted with one coat of white synthetic enamel paint complete all as specified and as directed.

S&F in repairs Canopy for Ceiling fans of 1200/1400mm sweep heavy duty as per sample complete all as specified and as directed.

S&F in repairs blade (set of 3 blades) for Ceiling fans of 1200/1400mm sweep heavy duty as per sample complete all as specified and as directed.

S&F in repairs blade for exhaust/fresh (set of 3 blades) air fans of 450 mm sweep heavy duty as per sample complete all as specified and as directed.

S&F in repairs Exhaust fan MS Louvers upto 450 mm sweep as per sample up to fourth floor of the bldg complete all as specified and as directed. Note:-Staircase arrangement for fixing of louvers up to fourth floor of the bldg shall be arranged by the contractor without any extra cost to Govt.

S&F in repairs single phase induction motor AC 230V, 1350 RPM copper wounded suitable for fresh air fan 300mm sweep as per sample complete all as specified and as directed.

S&F in repairs single phase induction motor AC 230V, 1500 RPM copper wounded suitable for fresh air fan 450mm sweep as per sample complete all as specified and as directed.

S&F in repairs single phase induction motor AC 230V, 1400 RPM copper wounded suitable for wall mounting fan upto 450 mm sweep as per sample complete all as specified and as directed.

S&F in repairs ceiling fan capacitor of 2.5 mfd capacity complete all as specified and as directed.

S&F in repairs ceiling fan capacitor of 3.5 mfd capacity complete all as specified and as directed.

Notes :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claims on this account shall be entertained on a later date.

verma enterprises (BID ID -3151113)

H.B. Traders (BID ID -3161013)

Chaudhary Constructions (BID ID -3155179)

Vijeta Solutions (BID ID -3154044)

Ruchi enterprises (BID ID -3151153)

Grid Infratech Pvt Ltd (BID ID -3155328)