Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC E 82 HQ CE A N Z PB POST BOX NO 687 LILLYPUR NEAR MES GURUDWARA HADDO POST SRI VIJAYA PURAM 744 102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹42.4 L+₹56,696 (1.36%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹42.9 L+₹1.1 L (2.56%)Rejected-Finance 2ND CROSS DEEN STREET M G ROAD JUNGLIGHAT POST SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹45.8 L+₹4.0 L (9.61%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹46.6 L+₹4.7 L (11.3%)Rejected-Finance OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
28 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
PROVISION OF MOTIVATION HALL NEAR BLDG NO P-24 AND PROVN OF PANTRY SPACE AT CTT(PBR), NIREEKSHANBHAVAN AT PANIPAT ROAD UNDER GE HADDO, PORT BLAIR
2023_MES_585103_1
8724/GE/H/PB
Open Tender
Civil Works
Item Rate
180 days
GE Haddo Port Blair
Class D and Category a(i)
9 documents required · 9 mandatory
₹500
GE Haddo
₹94,000
Yes
3 May 2023
9 Mar 2023
31 Mar 2023
9 Mar 2023
28 Mar 2023
23 Mar 2023
10 Mar 2023 - 17 Mar 2023
Amount
Excavating in post holes (or similar holes) in hard/dense soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth, for foundation etc., or for shafts, wells, cess pits, manholes, pier holes etc not exc. 10 Sqm on plan and n.exc. 1.5m in depth and getting out in hard / dense soil complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard / dense soil complete all as specified and as directed.
Removing excavated material (soils) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
M&L precast cement concrete as in blcok masonary exc 10 cm width with solid block C1 (1:3:6) (using 20mm graded stone aggregate) and setting in cement mortar (1:4) complete all as specified and as directed.
M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry not exceeding 10cm thick in width and setting in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster of any description complete all as specified and as directed.
M&L for plastering 15mm thick in CM (1:4) mixed with liquid water proofing compound @ 200ml per 50kg cement bag on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of primer completed all as specified and directed.
M&L complete removel of existing treatment of walls and applying two coats of distemper oil emulsion over a coat of primer .
M&L for complete removal plastered surface of ceiling and applying two coats of distember oil emulsion over one coat primer to get the surface smooth all as specified and as directed.
M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed
Supply only liquid water proofing compound.
Sand filling under floors or in foundation spreading and levelling in layers n.exc 25cm thick including watering and consolidation.
Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
S&F of UPVC/Fibre false ceiling of panel (not less than 1mm thickness) sizes of 340mm x 2700mm / 300mm x 2500mm, durable and resistant to moisture, water and borer-fungus-termite attack. Panels to be installed with GI / Aluminum sections of suitable gauge & size according to site conditions. Panels fixed using with suitable trims for edge profiles and for connecting profiles. Panels must be maintenece free, rust proof and are 100% water proof complete all as specified and sample kept in the office of the Engr-in-Charge. Note : (a) Colour and pattern or false ceiling boards to be approved by GE. (b) GI frame work will be measured and paid separately.
S&F GI frame work of seamless ceiling comprising of GI Perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fastners with and incl ceiling section (not exc 1.2m length) of 0.55mm thick having kurled web of 50mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete all as specified and as directed.
M&L for plain cement concrete (1:2:4) Type B1 (20 mm graded aggregate) as in bands seismic and other similar bands incl weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed.
S&F 150mm PVC (SWR) grade single socketed pipes, in any length pipes single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and as directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L for hardcore of gauge not exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders complete all as specified and directed,
M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.
M&L for 25mm PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floors / sub base complete all as specified and as directed.
M&L for heavy duty designer Vitrified tiles of size 300 x 300 x 10.8mm thick, or high dimension (except thickness) of any colour and design Durastone, weather proof impact resistant, abrasion resistant exterior tiles, as in floor etc, set and jointed in neat cement slurry over and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 350x250x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Dismantling of structural steel of any description not otherwise provided for all a specified.
S&F in repairs stainless steel grating cover 100mm dia fixed with white cement complete all as specified
S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Fe 410-w(Gde-E-250 ) quality A complete all as specified and as directed.
M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde E-250) Quality 'A' complete all as specified and as directed.
S & F for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed.
M&L for mild steel hold fasts, bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required : hooks (stay) heavy for large gates; hook and pintle hinges : karge hasps and staples; chains ; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angles cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc., complete all as specified and as directed.
S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws in semi circular / curved shape complete all as specified and as directed.
S&F for pre painted Galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.
M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for aluminium wind tie of any size fixed with self tapping screws of aize 50/75mm with integral EPDM washer in roof covering complete all as specified and as directed.
M&L for powder coated anodised aluminium, window and door/ventilator with frame and shutters and fully or partly glazed, sliding/openable/fixed fully glazed and panels fixed with panels inserts 12 mm thick pre-laminated particle board/sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, roller for sliding windows, locking arrangement, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts etc. The size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I complete all as specified and as directed.(Minimum thickness of powder coating shall be 50 micron) NOTES: (i) Supply only floor spring, glass, Imax hinges, SS friction hinges, particle board, aluminium fly proof mesh will be measured and paid separately under relevant items of this BOQ. (ii) Weight of aluminium section only shall be accounted for the purpose of payment. However unit rate quoted shall be deemed to include for cost of rubber beading, neoprene packing, fittings such as handles, butt hinges, tower bolts, rollers for sliding windows, locking arrangement and fixing only of panel inserts of glass/ particle board/aluminium fly proof mesh etc. (iii) Weight of aluminium handle, butt hinges, tower bolts shall not be accounted for payment purpose.
Supply only 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.
SUPPLY ONLY 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
SUPPLY ONLY 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F door closer, aluminium (extruded section body), hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed with screws complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.
Cutting holes exc 100sqcm but n exc 250sqcm into or through reinforced cement concrete slabs, chajjas, etc reinforced or otherwise.
Cutting channels, grooves or rebates with or without reinforcement n exc 15cm girth, and trimming surface for embedding the roof sheet into the wall column surface all as specified and as directed by Engr-in-Charge
M&L for Cutting chases, pinning in, making good to facing in wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10 cm girth complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) Type A1 1:1.5:3, 20mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc; basement slabs, under reamed piles and mass concrete.
M&L for Reinforced cement concrete (nominal mix) Type A1 1:1.5:3, 20mm graded aggregate in columns, pillars, piers, posts and struts all as specified and directed
M&L for Reinforced cement concrete (nominal mix) Type A1 1:1.5:3 20mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m Span complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) Type A1 1:1.5:3, 20mm graded aggregate in slabs support on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete flat complete all as specified and as directed.
M&L for use and waste of formwork to sides of sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete flat complete all as specified and as directed.
M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., for rough finished surfaces of concrete flat complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in rough finished flat surface all as specified and directed
Demolition of cement concrete block masonry walling in cement mortar complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified and directed
Demolition of reinforced cement concrete (Reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and directed.
M&L for aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame made up of aluminium hollow section of 25x50mm, 2.0mm thick, duly fixed to wall/ceiling with expansion fastener having panels not exceeding 1200x1200mm with necessary silicon filling, in approved pattern as in columns, beams, walls etc., complete all as specified and as directed. NOTE: Necessary scaffolding required for the work shall be deemed to include in the unit rate quoted.
M&L for seamless gypsum board false ceiling 12 mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fibre tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flange of 20mm and 30 mm, web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm c/c / intermediate channel 0.9 mm thick having two equal flanges of 15 mm suspended from soffit at approx 900 mm c/c with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thick having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting across the intermediate channel at 457 mm c/c including hangers 6 mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long and finally applying two coats of oil bound distemper with roller finish over a coat of primer after applying 3mm thick putty complete all as specified and as directed.
M&L for designer cornices all round the corners of seamless false ceiling all as specified and directed.
M&L for granite 18 to 20mm thick as in counter slabs of WHB (of any type) work (table rubbed and polished) in cooking plate forms, counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to watch with shade of granite all as specified and directed
S&F kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.
S&F 0.63mm thick SS sheet stainless steel kitchen plate rack of size 31'' x 30'' x 10'' standard quality complete all as specified and as directed. Make : Blue star, Prayag or equivalent .
M&L for 18/19mm thick HDF boarding (fire & water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated size of the cabinet as per requirement of the site or as directed by Engr-in-Charge, complete all as specified. Make: Bajaj / Axix / Greenply / Amnchidply / or equivalent. Note: (i) Cutting edges of cupboard shutter / shelves to be finished with adhesive edge binding tape all as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.
S&F in repair bib tap, cast copper alloy, 15mm dia, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.
Taking down GI tubing 20mm dia, with connection complete all as specified and directed.
S&F 25mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.
S&F Stainless steel auto closing hinges of standard size complete all as specified and directed.
S&F Stainless steel cupboard handle of 150mm size all as specified and directed
S&F Stainless steel tower bolt of 100mm size all as specified and directed
S&F magnetic door catcher for cupboard all as specified and directed
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including concealed PVC conduits as suitable of site (Medium Grade) of size not less than 25mm dia and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for the following:-
ONE LIGHT/FAN point controlled by one, one way 6 Amps modular switch.
TWO LIGHT point controlled by one, one way 6 Amps modular switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on independent board.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board with other modular switches.
M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through andincluding concealed PVC conduits as suitable of site (Medium Grade) of size not less than 25mm dia and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.
S&F modular switch, one way, one module, single pole, 6 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular switch, one way, one module, single pole, 16 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular switch socket outlet multipurpose, 3 pin, 16 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
S&F modular socket outlet, multipurpose, 3 pin, 6 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells
M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete as specified. Make of wire : Polycab/Gloster/Anchor/Havells/ Finolex/Anchor Make of PVC Casing & caping : Modi/Precision/Supreme/Finolex /Polycab
ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 5 Amps switch on independent board.
ONE 6A SOCKET OUTLET point controlled by one, one way 5 Amps switch on same board with other switches.
M&L for Point wiring two single core 4.0 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 4.0 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch all as specified. Make of wire : Polycab/Gloster/Anchor/Havells/ Finolex/Anchor Make of PVC Casing & caping : Modi/Precision/Supreme/Finolex /Polycab
S&F switch piano, flush type, single pole, one way, 5 Amps, 240 volts complete all as specified and as directed.
S&F socket outlet, 2-in-1, 3 pin, 5 Amps, flush type, multipurpose, 240 volts complete all as specified and as directed. Make : Anchor / Cona / Legrand
S&F socket outlet 15 Amps, multipurpose, 2/3 pin, 5/15 Amps, 230 V AC complete all as specified and as directed. Make : Anchor / Cona / Legrand
S&F AC starter switch of capacity 25 Amps working on 240 Volts, AC supply with 15 Amps plug top and 15 Amps sockets suitable for split type airconditioner complete all as specified and as directed. MAKE: CRAB TREE Cat part No. ACTO252504 or equivalent in ANCHOR/HAVELLS/L&T
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed. Anchor / Cona / Legrand
S&F ceiling fan of metallic body, 1200mm sweep, 220V, 50Hz AC supply, white colour including providing of twin core copper wire 23/0.0076 from ceiling fan to ceiling rose complete all as specified and as directed. Make : CG (Model No : Glanna) or equivalent in Usha / Orient/ Havells
S&F wall mounting fan of 400mm sweep, including all fixing arrangements complete all as specified and as directed. Make : CG Model No. PF Hiflo Wave/Havells/Usha/Orient
S&F exhaust fan of 300mm sweep 220 Volts AC, 50Hz with all fixing arrangements complete all as specified and as directed. Make : CG Model No. Trans Air 12"-Reversible/ Orient / Usha / Havells
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make:Roma (Anchor)/Legrand/Simens/Havells
S&F Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements complete all as specified and directed Make :CG Cat Part No : CCS-100-20-65-HL2-DP-NWHLC/ Philips Cat Part No : Astra Line Plus / C&S/Havells
S&F of LED tube light fittings with 20 watts (Warm White/ White Colour as per requirement of site complete) light source in integral module with polycarbonate / Acrylic diffuser more than 85% efficiency of light with LED lamp efficacy as 110 Lum/W THD < 15% with operating voltage range 150-300V, 50Hz with driver efficiency > 85%, surge voltage withstand 2.5KV, Power factor > 0.9, energy efficient fitting surface mounted including connecting up with two/three core cable complete all as specified and directed. Make : Luker/ Havells/ Philips/ Crompton Note : Quoted rate is inclusive of any other misc materials required for fixing new fittings.
S&F decorative ultra slim linear LED light fixture of 18 Watts capacity, recess mounted, 220 Volts, 50 Hz AC supply, extruded aluminium heat sink, environmental friendly energy efficient light fitting, surface mounted round in shape(Warm white/white colour as per requirement of site) complete all as specified and as directed. MAKE: Philips Cat Part No : Dura Slim or equivalent in CG/HAVELLS
S&F new GI brackets of GI pipe light grade of size 25mm dia including nuts, bolts and washers for building security light complete all as specified and directed.
S&F 25 watts LED building security light fittings IR 65 luminaire. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 including necessary fixing arrangements as per site requirements complete all as specified and directed. Make : C & S Model No. LTESSE25WLED/ Philips Model No. BRP020LEDHP/CW240V25/ CG Cat No - LSTS-25-CDL/ Havells/ Luker Cat Part No : LOHY210 WH
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
S&F MCCB DB sheet steel enclosure, VTPN, 4-way, double door, 415 Volts with 200 Amps rated bus bar, IP-43 protection suitable for incoming MCCB 160/200 Amps and outgoing MCB TP/SP, enclosed in standard steel sheet flush mounting type, factory fabricated complete all as specified and as directed. MAKE: L&T/ LEGRAND/ INDO ASIAN/ HAVELLS
S&F MCCB, 4 pole, 100 Amps, 25KA rupturing capacity, 415 Volts with thermal and magnetic release complete all as specified and as directed. Make : Havells/ L&T/ Indo Asian/ Legrand
S&F MCB, SP, "C" series, 240 volts, 6-32 Amps, 10 KA rupturing capacity complete all as specified and as directed. Make : Havells/L&T/Indo Asian
M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
M&L for LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 4 core, 16 Sqmm laid in trenches/floors/ducts or fixed on poles/walls with suitable clamps/saddles or drawn through pipes etc., including connecting up with suitable size of lugs, glands and jointing material complete all as specified and as directed. Note: (i) Necessary test results like continuity test, megger tests shall be submitted to Engg-in-Charge before the cable is laid. (ii)Excavation earth work will be measured and paid separately
M&L for HDPE DWC (Double wall corrugated) pipe of size 50mm (Outer diameter) x 38mm (Inner diameter) along with connected accessories like couplers, bends, end caps etc., laid in trenches/floors/ducts or fixed on poles/walls for as in protection of LT/ HT cable complete all as specified and as directed. Make : REX POLYEXTRUSION LTD/ Tirupati plastomatics Pvt Ltd
M/S VISHAL CONSTRUCTION
JD Construction
CARTWHEEL CONSTRUCTION
M/s Ramesh Lal
SKV Engineering
Sree Tirumala Enterprises
CHANDER SEKER ENTERPRISE
V KARTHICK
LOOK UP ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .