REPAIR MAINTENANCE INCLUDING PAINTING POLISHING TO ALL TYPE OF STEEL AND WOODEN FURNITURE OF BSO NORTH MEERUT CANTT

Amount

Removing the old unserviceable/damaged part from the following Steel and Wooden furniture (i.e. BOQ Srl item No 1 to 253) M&L to replace the same with new parts duly match with the existing parts and completing finish with French polish/paint as required without damaging the other parts, size and shape of the parts shall be all as specified ,shown on drgs and as directed by Engr-in-Charge:- CHAIR VERANDAH :- FD-256 (a) Removing of old unserviceable plastic cane from chair verandah and supply and fixing of PVC seat and back of 4mm thick weight not less than 1.85 Kg each. Make : – AMKO / CELLO.

(b) M&L Gas welding to frame of chair verandah and providing two stiffeners at the seat of chair verandah Including preparation of surfaces and removing the unwanted welding spot to give smooth surface complete all as directed by Engr-In-Charge.

(c) M&L for painting of frame of chair verandah With white synthetic enamel paint Including preparation of surfaces after removing the cane and providing 04 Nos PVC shoes of black colour to legs of chair verandah complete all as specified and directed by Engr-In-Charge.

(d) Removing of old unserviceable cane from holes & recaning the chairs etc with approved new plastic cane as per Godrej Pattern all specified in those chair verandah where fixing of the seat and back is not possible. Rest all as shown in drg and directed by Engineer in charge.

Almirah Large / Med / Small and 1/2H x 1/2SH Steel - FD- 67M, 1031, 1033 & 1034 FD/E6/MAP 18(R) (a) Lock : S & F in replacement lock ISI marked having 3 way locking device suitable for almirah with duplicate keys.

(b) Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge.

(c) Door Shutter : M&L for adjustment of door shutters by denting as required and directed by Engr-in-Charge.

(d) CP Handle : S&F in replacement C P steel handle ISI marked and to make the locking device in proper function as specified and shown on drg

(e) Legs : (i) S&F in replacement legs (Foot rest) of 18 gauge MS sheet wherever required to Almirah Med/Small including 1/2H x 1/2SH steel made to shape as per drg.

(f) Legs : (ii) S&F in replacement legs (Foot rest) of 18 gauge MS sheet wherever required to Almirah large including 1/2H x 1/2SH steel made to shape as per drg.

(g) Shelf : (i) S&F in replacement shelf to be made of minimum 1.00mm thick MS sheet for Almirah Med/Small as per drg and shall be fixed with reviting and suitable MS clamp as approved.

(h) Shelf : (ii) S&F in replacement shelf to be made of minimum1.00mm thick MS sheet for Almirah large as per drg and shall be fixed with reviting and suitable MS clamp as approved.

(j) Painting : (i) Painting to Almirah Med/small and 1/2H x1/2S steel internally & externally after removing the dust /de-rusting of surface by applying putty wherever required preparation of surface with one coat of toned paint synthetic enamel silver grey as directed by Engr-in-charge. Primer shall be provided at placed where welding has been carried out and new shelf is provided.

(k) Painting : (ii) Painting to Almirah large and 1/2H x1/2S steel internally & externally after removing the dust / de-rusting of surface by applying putty wherever required preparation of surface with one coat of toned paint synthetic enamel silver grey as directed by Engr-in-charge. Primer shall be provided at placed where welding has been carried out and new shelf is provided.

LOCKER STEEL :- FD-257 (a) Hasp & Stapple: S & F in replacement hasp and staple CP / Brass ISI marked size 75x40x3mm to shutter as shown on drg as approved by Engineer-in-Charge

(b) CP Socket: S & F in replacement suitable bracket and stappled socket open at one end as approved shall be fixed as directed and shown on drg as approved by Engineer-in-Charge

(c) Handle: S & F in replacement CP / Brass handle 100mm long ISI marked as approved

(d) Hanging Rod : S & F in replacement conduit pipe stainless steel 20mm bore 1.6 mm thick as approved by GE. Length of conduit shall be as per drg

(e) Shutters : S & F in replacement shutter of locker steel made of minimum 1.00 mm thick PBI sheet of size and shape as per drg

(f) Legs : S & F in replacement legs of locker steel fabricated out of 1.00 mm thick MS sheet made to shape as per drg

(g) Hinges : S & F in replacement 75mm long MS hinges to shutter of locker steel including reveting as directed

(h) Painting : Painting to locker steel internally & externally after removing the dust /de-rusting of surface by applying putty wherever required preparation of surface with coats of toned paint synthetic enamal silver grey as directed by Engr-in-charge. Primer shall be provided at placed where welding has been carried out and new shelf is provided.

TABLE 3’x2’ WITH / WITHOUT DRAWER STEEL:- FD-1007 & 1008 a) Supply and fixing of Top shall be made out of prelaminated MDF board 18 mm thick exterior grade as per drg. Teak wood beading 4mm thick duly finished shall be provided all around before fixed with frame.

(b) Replacement of damaged Legs of table 3’x2’ to be made of MS Conduit pipe 25mm square 16gauge .

(c) Replacement of damaged Stiffener /Short rail to be made of MS Conduit pipe 25mm square 16 gauge.

(d) Replacement of damaged drawers to be fabricated out of 1.00 mm thick MS sheet including PVC handle as shown on drg.

(e) Replacement of Hard rubber shoe of black colour of approved quality.

(f) Painting : (i) Spray Painting to steel frame of table 3'x2' without drawer externally after preparation of surface with paint synthetic enamel OG . Primer shall be provided where welding has been done as well as new conduit MS is provided.

(g) Painting : (ii) Spray Painting to table 3'x2' with drawer externally internal except frame after preparation of surface with paint synthetic enamel OG . Primer shall be provided where welding has been done as well as new conduit MS is provided.

Teapoy verandah:- FD-255/ FD/E6/MAP-17 (a) Top :Top to be made out of prelaminated MDF board 18 mm thick exterior grade as per drg and edging all around with 4 mm thick teak wood beading.

(b) Frame for FD-255 only : supply & fix in replacement of frame out of angle iron size 20x20x3mm with legs 4 Nos 10mm dia MS bar made to shape along with centre support of size 25x3mm MS flat welded to angle iron frame as shown on drg (FD-35) welded to frame duly painted with paint synthetic enamel white over a coat of primer.

(b) Frame for FD/E6/MAP/17 only : supply & fix in replacement of unserviceable or broken frame out of 25mm square tube welded to frame duly painted with paint synthetic enamel over a coat of primer.

(c) FD-255/ FD/E6/MAP-17 Spray Painting to steel frame of teapoy verandah without drawer externally after preparation of surface with paint synthetic enamel of desired colour over a coat of . Primer shall be provided where welding has been done as well as new conduit MS is provided.

TABLE DINING OR’S STEEL :- FD-165M (a) Top :Supply and fixing new top made out of 18mm thick MDF board exterior grade as per drg duly covered with aluminum sheet 24 gauge of required size as shown on drawing after removing the old one.

(b) Repair and replacement of legs with 25mm square pipe duly welding at the point as shown in drg.

(c) Repair and replacement of stiffeners with 25mm square pipe duly welding at the point as shown in drg.

(d) Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs.

(e) Painting : Spray Painting to steel structure complete with one coat of paint synthetic enamel black after preparation of surface. Primer shall be provided where welding has been done as well as new conduit MS is provided.

TABLE 900X900X760 MM STEEL WITHOUT DRAWERS : FD- 1009 (a) supply and fixing of Table top with prelaminated MDF board 18 mm thick exterior grade as per drg including egding with 4mm thick teak wood beading all as per drg

(b) supply and replacement of Legs MS pipe 25mm Square 16 gauge all as per drg

(c) Supply and fixing of 1.6mm thick 100X100mm triangular ms sheet bracket duly welded as directed wherever necessary

(d) Painting : Painting to table steel tubular externally shall be done after preparation of surface with paint synthetic enamel OG.

TABLE OFFICE CLERK STEEL :- FD-1004 (a) Supply and replacement of Top of Table Office clerk steel with prelaminated MDF board 18 mm thick exterior grade as per drg including egding with 4mm thick teak wood beading all as per drg

(b) Supply and replacement of drawers to be fabricated out of 1.00 mm thick MS sheet including PVC handle as shown on drg.

( c) Supply and replacement of Legs/Stiffeners to be made of MS Conduit pipe 25mm square 16gauge

(d) Supply and replacement of lock of drawers. Lock of 65 mm thick 6 Lever, Brass Make as approved.

(e) Supply and replacement of Hard rubber shoe of black colour of approved quality.

(f) Painting : (i) Spray Painting to steel frame of table office clerk steel externally after preparation of surface with paint synthetic enamel OG . Primer shall be provided where welding has been done as well as new conduit MS is provided.

TABLE OFFICE OFFICER STEEL :- FD-1003 (a) Supply and replacement of prelaminated MDF board 18 mm thick exterior grade as per drg with 4mm thick teak wood beading all as per drg

(b) Supply and replacement of drawers to be fabricated out of 1.00 mm thick MS sheet including

( c) Supply and replacement of Legs/Stiffeners to be made of MS Conduit pipe 25mm square 16gauge

(d) Supply and replacement of lock of drawers. Lock of 65 mm thick 6 Lever, Brass Make as approved.

(e) Supply and replacement of Hard rubber shoe of black colour of approved quality.

(f) Painting : Spray Painting to steel frame of table office officer steel externally after preparation of surface with paint synthetic enamel OG . Primer shall be provided where welding has been done as well as new conduit MS is provided.

CHAIR CB STEEL WITH / WITHOUT ARMS :- FD-75 (a) Seat : S & F of Teak wood seat frame suitable for chair CB Steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern in teak finish duly sprit polished after taking out the old one as shown on drg.

(b) Back : S & F of Teak wood back frame suitable for chair CB Steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern in teak finish duly sprit polished after taking out the old one as shown on drg.

(c) Arms : S & F in replacement PVC arms as per sample in teak/black finish.

(d) FI Stiffener of size 25x3mm : FI stiffener shall be welded side rails of the chairs to rest seat of chair CB steel with arms and without arms irrespective of what is shown on drg and as directed by Engr-in-charge.

(e) PVC cap : PVC cap suitable for 20mm dia 1.6mm thick pipe of best quality shall be provided as approved by GE.

(f) Hard PVC toes with screws : Hard PVC toes of approved quality and to be fixed with screws to the bottom of the chair as shown on drg.

(g) Painting : Spray Painting to chair CB steel tubular with arms externally shall be done after preparation of surface with paint synthetic enamel OG.

RACK SHOE STEEL:- FD/E6/MAP/02(R) M & L painting the shoe rack steel by two coats of synthetic enamel black colour of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed.

RACK STEEL:- Drg No FD-1023 M & L painting the rack steel by two coat of synthetic enamel oilve green colour of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed

TABLE COMPUTER :- FD/E6/MAP/03 & TP Removing unserviceable top, S & F new top of pre-laminated MDF board 18mm thick exterior grade in shape as approved by GE both side lamination with 4mm thick teak wood beading duly polished and sunmica pasted matching the color of the top as per required complete all as directed.

Removing unserviceable key board tray & S & F new key board tray18mm thick prelaminated particle board (450x480mm) on telescopic channel all as per drawing.

Removing unserviceable drawer & S & F new drawer 18mm thick prelaminated particle board 75mm deep on telescopic channel all as per drawing.

Removing unserviceable shoes, S & F new hard rubber shoes(nylon buffers) to legs complete all as directed.

CHARPOY SQUARE TUBULAR/BED HARD MAP :- FD-220(R) & FD/E6/MAP/08(R) Taking out unserviceable plywood top from Charpoy square tubular/Bed Hard MAP and supply and fix with new plywood 12mm thick plywood BWR grade, 7 ply ISI marked of reqd size as per shown on drawing in charpoy MS rectangular pipe and all as specified and as shown on drg.

Taking out unserviceable head board/foot board from Bed Hard MAP and supply and fix for new head board/foot board made out of 18 mm prelaminated MDF board exterior grade complete all as per drg and as directed.

Material and labour for preparation of old painted steel surfaces Charpoy square tubular/Bed Hard Map and applying one coat of synthetic enamel paint complete all as specified and as directed.

New PVC shoes replacing the old unsv PVC shoes all as directed by Engr-in-Charge .

CHAIR COMPUTER,CHAIR REVOLVING EXECUTIVE(HIGH/LOW BACK),CHAIR REVOLVING WITH ARMS:- FD/E6/MAP/01 & TP Removing unserviceable seat, S & F new seat of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The seat foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick along with the fabric of approved quality & color. All as directed by Engr-in-Charge.

All as per serial item No. 72 here-in-before but for back of chair.

Removing unserviceable castor wheels, S & F new castor wheels as per the approved sample allas directed.

Removing unserviceable hand rest, S & F new hand rest matching the previous all in shape,size,material & quality all as directed.

Removing unserviceable pedestal assembly, S & F new pedestal assembly all matching the shape,size & quality of the previous all as directed.

Removing unserviceable synchro tilting mechanism & replacing with new synchro tilting mechanism.

M & L servicing the gas lift mechanism & making the seat adjustment functional. All as directed by Engr-in-Charge.

CHAIR WRITING,CHAIR VISITORS:- FD/E6/MAP/12 & TP Removing unserviceable seat, S & F new seat of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The seat foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick along with the fabric of approved quality & color. All as directed by Engr-in-Charge.

All as per serial item No. 79 here-in-before but for back of chair.

Removing unserviceable hand rest, S & F new hand rest replacing the old matching the previous all in shape,size,material & quality all as directed.

Removing unserviceable rubber Toe & S & F new rubber Toe as approved. All as directed.

M & L painting all over the chair writing / chair visitors with one coat synthetic enamel paint of black colour and applying with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing one coat of primer complete all as specified and directed by Engineer-in-Charge.

BED PLY TOP:- FD-245 , 246,&247 (a) Repair to Head Rest of Bed with plywood top outer and inner ply shall be of 4 mm thick plywood veenered ISI marked BWR grade and teak wood beading 6mm thick all round shall be pasted with Fevicol and nails all as per drg and directed by Engr-in-Charge.

(b) Repair to Foot Rest of Bed hard with plywoood top outer and inner ply shall be of 4mm thick plywood teak ISI marked BWR grade and teak wood beading all round 6mm thick shall be pasted with Fevicol and nails all as per drg and directed by Engr-in-Charge.

(c) Replacement of the damaged worn out Top of the bed which to be made up of plywood commercial 12 mm thick 5 ply BWR grade conforming to IS 303- 1989 in one piece after taking down the old one and to be fixed with 35 mm long stainless steel screw wood steel ISI marked all as specified in drg or as directed by Engr-in-Charge

(d) Replacement of Legs, of bed to be made up oof Ist class Teak wood well seasoned.

(e) Replacement of Long Rail to be made up of of Ist class Teak wood well seasoned.

(f) Replacement of Short Rail to be made up of Ist class Teak wood well seasoned.

(g) M&L for removing the existing old polish from Bed ply wood top by scraping with emery paper to make the surface smooth and fill the cracks and pores with Sam Sam putty and apply two coats of French polish of approved quality high gloss polish of surface exposed when placed in position a s specified and directed by Engr-in-Charge.

PEG TABLE:- FD277 &384 (a) Repair/Replacement of Top which shall be made up of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all around all as directed by Engineer -in charge

(b) Replacement of legs which shall be made out of 1st class teak wook well seasoned.

(c) Replacement of long rail which shall be made out of 1st class teak wook well seasoned.

(d) Replacement of short rail which shall be made out of 1st class teak wook well seasoned.

(e) All as item No 90 here in before but for Table Peg

TABLE CENTRE:- FD-274 (a) Repair/Replacement of Top which shall be made up of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beadingall around all as directed by Engineer -in charge.

(b) Replacement of legs which shall be made out of 1st class teak wook well seasoned.

(c) Replacement of long rail which shall be made out of 1st class teak wook well seasoned.

(d) Replacement of side rail which shall be made out of 1st class teak wook well seasoned.

(e) Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(e) All as item No 90 here in before but for Table Centre

SIDE BOARD: - FD-26/241 FD-1111 (a) Replacement of TOP of Side board to be made out of 18mm thick prelaminated MDF Board exterior grade of and with 4mm thick teak wood beading all as directed by Engineer -in charge

(b) Replacement of damaged Sides of Side board to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked

(c) Replacement of Bottom of Side board to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked

(d) Replacement of Door Shutters to be made out of18mm thick prelaminated MDF Board exterior grade ISI marked covered with allround 4 mm thick teak wood beading and duly fixed with knobs and piano type hinges.

(e) Replacement of Front side of drawers to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked and Bottom and sides of 12 mm thick commercial ply wood and 3 mm thick beading teak wood to be fixed, pr ovided one knob each drawers.

(f) Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg.

g) Replacement of Back ply of 6mm thick plywood commercial all as per drg

h) (e) All as item No 90 here in before but for Side board

TEAPOY:- FD 232 & 382 (a) Supply and fixing of top with 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all around all as directed by Engineer -in charge

(b) Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg.

(c )Repair /Replacement of long rail which shall be made out of 1st class teak wook well seasoned.

(d) Replacement of side rail which shall be made out of 1st class teak wook well seasoned

(e) Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(f) All as item No 90 here in before but for Teapoy

TABLE DINING FOR 6 PERSONS:- FD30, 239, FD-MAP-II/03 (a) Top : Replacement of Top 18mm thick prelaminated MDF Board exterior grade of and with 4mm thick teak wood beading all around all as directed by Engineer -in charge

(b) Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg.

c) Long Rail to be made out of Ist class Teak wood well seasoned for table dining 6 persons.

(d) Short Rail to be made out of Ist class Teak wood well seasoned for dining 6 persons.

(e) Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(f) All as item No 90 here in before but for Table dining 6 person

TABLE DINING FOR 8 PERSONS:- FD30, 239 &376 (a) Top : Replacement of Top which shall be made out of18mm thick prelaminated MDF Board exterior grade of and with 4mm thick teak wood beading all around all as directed by Engineer -in charge

(b) Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg.

(c) Long Rail to be made out of Ist class Teak wood well seasoned for table dining 8 persons.

(d) Short Rail to be made out of Ist class Teak wood well seasoned for table dining 8 persons.

(e) Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(f) All as item No 90 here in before but for Table dining 8 person

TABLE WRITING:- FD-33, FD-275 (a) Replacement of Top which shall be made out of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beadingall around all as directed by Engineer -in charge

(b) Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg.

(c) Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned

(d) Replacement of Door Shutters to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked covered with all round 4 mm thick teak wood beading and duly fixed with knobs and piano type hinges4 mm thick with 4 lever 40 mm brass lock.

(e) Replacement of back of table writing which shall be made out of 06 mm thick commercial ply wood ISI marked

(f) Replacement of Drawers of table writing to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked and 4 mm thick beading teak wood to be fixed and provided one knob.

(g) Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(f) All as item No 90 here in before but for Table writing

TABLE 3’x 2’ WITH / WITHOUT DRAWER:- FD-41, 42, 231, 224, 234, 283 & 284 (a) Top : Replacement of Top which shall be made out of 18mm thick prelaminated MDF Board exterior grade of and with 4mm thick teak wood beading all around all as directed by Engineer -in charge .

(b) Replacement of legs which shall be made out of 1st class teak wook well seasoned.

(c) Replacement of short rail which shall be made out of 1st class teak wook well seasoned.

(d) Replacement of long rail which shall be made out of 1st class teak wook well seasoned.

(e) Replacement of stiffener which shall be made out of 1st class teak wook well seasoned.

(f) Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(f) All as item No 90 here in before but for Table 3'X 2' with /without drawer

TABLE 3’x 3’(900x900x760mm) /Table dining JCO/OR for 4 person :- FD- 88 , 291 FD/MAP-II/03 (a)Top : Replacement of Top shall be made out of 18mm thick prelaminated MDF Board exterior grade of and with 4mm thick teak wood beading all around all as directed by Engineer -in charge

(b) Replacement of legs which shall be made out of 1st class teak wook well seasoned.

(c) Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned

(d) Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(e) All as item No 90 here in before but for TABLE 3’x 3’(900x900x760mm)/Table dining JCO/OR for 4 person .

HAT STAND WITHMIRROR:- FD- 23 & 361 (a) Replacement of Looking Mirror of size 460 mm x 300 mm x 5 mm of approved quality of make in existing board and edging with 4 mm thick teak wood beading. Rest all as per drg and directed by Engr-in-Charge.

(b) Replacement or supply of Aluminum peg of 6" long shall be fixed with 1/2" screw and all as per drg.

(c) All as item No 90 here in before but for Hat Stand with mirror

TABLE DRESSING GENTS WITH MIRROR :- FD-31 (a) Removing of U/S looking mirror along with wooden frame from Table dressing gents. S& F new approved quality electro copper plated sheet glass mirror of size 750mm x 360mm x 5mm (Make as approved) duly fixed in wooden frame made of Teak wood and back of 6 mm thick commercial ply wood, ISI marked.

(b) Replacement of Top for Table dressing gents to be made out of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as per drg and directed by Engr-in-Charge

(c ) Replacement ofBottom for Table dressing gents to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked all as per drg and directed by Engr-in-Charge

(d) Replacement of Side for Table dressing gents to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked

(e) Back for Table dressing gents shall be of 6mm thick commercial ply ISI marked all as per drg and directed by Engr-in-Charge.

(f) Replacement of Drawer for table dressing gents shall of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as per drg and directed by Engineer-in-Charge.

(g) All as item No 90 here in before but for Table dressing gents with mirror

TABLE DRESSING LADIES WITH MIRROR:- FD-32, 251, FD/MAP-II/07 (a) ) Removing of U/S looking mirror along with wooden frame from Table dressing Ladies. S& F new approved quality electro copper plated sheet glass mirror of size 1220 mm x 365 mm x 5 mm (Make as approved) duly fixed in wooden frame made of Teak wood and back of 6 mm thick commercial ply wood, ISI marked.

(b)Replacement of Sliding glass shutters shall be of 5mm thick glass shall be run on wheel and all as per drg and directed by Engr-in-Charge.

(c) Replacement of Leg for Table of Ist class teak wood well seasoned.

(d) Replacement of Top for Table dressing ladies to be made out of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beadingall as per drg and directed by Engr-in-Charge

(e) Replacement for Bottom for Table dressing ladies to be made out of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as per drg and directed by Engr-in-Charge

(f) Replacement of Back for Table dressing ladies shall be of 6mm thick commercial ply ISI marked with and including 1mm thick and 1mm thick plastic laminated shall be pasted with Fevicol over the ply and all as per drg and directed by Engr-in-Charge.

(g) Replacement of Side for Table dressing ladies to be made out of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beadingall as per drg and directed by Engr-in-Charge.

(h) All as item No 90 here in before but for Table dressing ladies

BOOK CASE:- FD-237 (a) Replacement of Back of Book case shall be made out of 6mm thick commercial ply wood make ISI marked.

(b) Replacement of Top/ bottom / sides of book case which shall be of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as directed by Engineer in charge.

(c) All as item No 90 here in before but for Book Case

TABLE BED SIDE FD-28 & 276 (a) Replacement of Top shall be of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as per drg

(b) Replacement of Bottom of table bed side to be made of 18mm thick prelaminated MDF Board exterior grade all as directed by Engr-In-Charge.

(c) Replacement of Back of table bed side to be made of 6 mm thick commercial ply wood BWR grade ISI marked all as per drg and directed by Engr-In-Charge.

(d) All as item No 90 here in before but for Table bed side

SOFA SET SINGLE SEATER :- FD-281/FD-373 /FD/MAP-II/02 (a) Replacement of Arm of single seater which shall be made out of Ist class Teak wood well seasoned and all as per drg and directed by Engr-in-Charge.

(b) Replacement of Legs of single seater whiich shall be made up off Ist class Teak wood well seasoned and all as per drg and directed by Engr-in-Charge.

(c) Replacement of Side rail of single seater which shall be made out of first class Teak wood well seasoned and all as per drg and directed by Engr-in-Charge.

(d) Replacement of Wooden battens of single seater which shall be made out of Ist class Teak wood well seasoned for Sofa set single seater with Drg FD-281 / FD-373

(e) Replacement of back and seat 12mm thick commercial plywood for single seater of sofa set of Drg No FD/MAP-II/02

(f) Replacement of Back rail of single seater shall be made out of Ist class Teak wood well seasoned

(g) Front rail single seater shall be made out of Ist class Teak wood well seasoned

(h) All as item No 90 here in before but for sofa set single seater

SOFA SET THREE SEATER :- FD-281/FD-373 /FD/MAP-II/02 (a) Replacement of Arm of three seater which shall be made out of Ist class Teak wood well seasoned and all as per drg and directed by Engr-in-Charge.

(b) Replacement of Legs of three seater whiich shall be made up of Ist class Teak wood well seasoned and all as per drg and directed by Engr-in-Charge.

(c) Replacement of Side rail of three seater which shall be made out of Ist class Teak wood well seasoned and all as per drg and directed by Engr-in-Charge.

(d) Replacement of Wooden battens of three seater which shall be made out of Ist class Teak wood well seasoned for three seater sofa set of drg No FD-281/ FD-373

(e) Replacement of ply with 12mm thick commercial ply of seat and back of sofa set of drg No FD/MAP-II/03

(f) Replacement of Back rail of three seater shall be made out of Ist class Teak wood well seasoned

(g) Replacement of Front rail of three seater shall be made out of Ist class Teak wood well seasoned

(h) All as item No 90 here in before but for sofa set three seater

CHAIR EASY:- FD-229 (a) Replacement of Front legs which shall be made out of Ist class Teak wood well seasoned

(b) Replacement of Rear legs which shall be made out of Ist class Teak wood well seasoned

(c) Replacement of Arm rest which shall be made out of Ist class Teak wood well seasoned

(d) Replacement of Rail of seat/back which shall be made out of of Ist class Teak wood well seasoned

(e) Removing of old unserviceable / turnout plastic cane from chairs and M&L for preparation of surfaces filling the cracks, tightening the frame by providing the fevicol, putting wooden nails where necessary and recanning the same with new white plastic cane of 2mm wide and 0.4mm thick, ½ round oval shape and beading all round with 3mm wide and 0.4mm thick recanning shall be done as per Godrej pattern as shown in drawing or as directed by Engr-in-Charge.

(f) Replacement Hard PVC shoes of approved quality shall be fixed to the bottem of the legs with 20mm long screw wood steel ISI marked.

(j) All as item No 90 here in before but for chair easy

CHAIR DINING: (MAP) :- FD/MAP-II/05 (a) Replacement of Front Leg,which shall be made out of Ist class Teak wood well seasoned

(b) Replacement Rear leg which shall be made out off Ist class Teak wood well seasoned

(c) Replacement Back Rest which shall be made out of Ist class Teak wood well seasoned

(d) Replacement Stiffeners which shall be made out of Ist class Teak wood well seasoned

(e) Replacement Side Rail which shall be made out of Ist class Teak wood well seasoned

(f) Replacement of Front rail which shall be made out of Ist class Teak wood well seasoned

(g) Replacement Back Rail, of Ist class hard wood Teak wood well seasoned.

(h) Replacement of Hard PVC shoes of approved quality which shall be fixed to the bottem of the legs with 20mm long screw wood steel ISI marked.

(j) Replacement of seat of chair dining of drg FD/MAP-II/05 with PVC seat of correct dimension of make AMKO / CELLO or equivalent placed in exact position and supported by 25mm X 25mm wooden stiffner to avoid breaking of PVC seat.

(k) All as item No 90 here in before but for chair dining

CHAIR DINING FD : - FD-279 (a) Replacement of Front Leg,which shall be made out of Ist class Teak wood well seasoned

(b) Replacement Rear leg which shall be made out off Ist class Teak wood well seasoned

(c) Replacement Back Rest which shall be made out of Ist class Teak wood well seasoned

(d) Replacement Stiffeners which shall be made out of Ist class Teak wood well seasoned

(e) Replacement Side Rail which shall be made out of Ist class Teak wood well seasoned

(f) Replacement of Front rail which shall be made out of Ist class Teak wood well seasoned

(g) Replacement Back Rail, of Ist class hard wood Teak wood well seasoned.

(h) Replacement of Hard PVC shoes of approved quality which shall be fixed to the bottem of the legs with 20mm long screw wood steel ISI marked.

Removing of old unserviceable / turnedout plastic cane from chairs and M&L for preparation of surfaces filling the cracks, tightening the frame by providing the fevicol, putting wooden nails where necessary and recanning the same with new white plastic cane of 2mm wide and 0.4mm thick, ½ round oval shape and beading all round with 3mm wide and 0.4mm thick recanning shall be done as per Godrej pattern as shown in drawing or as directed by Engr-in-Charge.

(k) All as item No 90 here in before but for chair dining

CHAIR WRITING:- FD-280 (a) Replacement of front leg which shall be made out of of Ist class Teak wood well seasoned

(b) Replacement of Rear leg which shall be made out of Ist class Teak wood well seasoned

(c) Replacement of Back rest shall be made out of Ist class Teak wood well seasoned

(d) Replacement of Stiffeners shall be made out of Ist class Teak wood well seasoned

(e) Replacement of Arm rest shall be made out of Ist class Teak wood well seasoned

(f) Rails of Seat duly holes shall be made out of Ist class Teak wood well seasoned

(g) Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(h) All as per item No 214 here in before but for chair writing

(j) All as per item No 90 here in before but for chair writing

STOOL DRESSING:- FD-252 (a) Replacement of Leg which shall be made out of of Ist class Teak wood well seasoned

(b) Replacement of Front rail which shall be made out of of Ist class Teak wood well seasoned

(c) Replacement of Side rail which shall be made out of Ist class Teak wood well seasoned

(d) All as per item No 214 here in before but for stool dressing

(d) All as per item No 90 here in before but for stool dressing

CUSHION SET FOR SOFA SET 4 SEATED/ 5 SEATED:- FD 281/FD-373 Removal of old unserviceable cushion and S & F new cushion of size 22” x 21” x 4” thick, 40 HD of covered with superior quality tapestry cloth for seat and back of sofa set 4/5 seater. Tapestry cloth should not less than Rs 350/- per meter duly approved by GE and all as per drg and directed by Engr-in-Charge.

CHAIR DINING OFFRS:- FD/MAP-II/04 (a) Replacement of Front Leg,which shall be made out of Ist class Teak wood well seasoned

(b) Replacement Rear leg which shall be made out off Ist class Teak wood well seasoned

(c) Replacement Back Rest which shall be made out of Ist class Teak wood well seasoned

(d) Replacement Stiffeners which shall be made out of Ist class Teak wood well seasoned

(e) Replacement Side Rail which shall be made out of Ist class Teak wood well seasoned

(f) Replacement of Front rail which shall be made out of Ist class Teak wood well seasoned

(g) Replacement Back Rail, of Ist class hard wood Teak wood well seasoned.

(h) Replacement of Hard PVC shoes of approved quality which shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

(j) Removing of old unserviceable foam and replacing with the suitale foam of 40 density and covering with the proper tapestry cloth of not less than 350/- per meter.

(k) All as per item No 90 here in before but for chair dining Offrs

STOOL DRESSING MAP:- FD/MAP-II/07 (a) Replacement of unserviceable sides of stool dressing with pre- laminated MDF board of ext grade

(b) Replacement of top of stool dressing with 10mm thick ply top

(c) Replacement of unserviceable cushion of stool dressing with 75mm thick 40 density foam providing with required qty of tapestry cloth of not less than Rs 350 per meter

(d) All as per item No 90 here in before but Stool dressing MAP

TABLE BED SIDE:- FD/E6/MAP/15(R) (a) Replacement of unserviceable Top shall be of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as per drg

( c) Replacement of unserviceable Back of table bed side to be made of 12 mm thick commercial ply wood BWR grade ISI marked all as per drg and directed by Engr-In-Charge.

(b) Replacement of unserviceable square pipe of 25mm dia all as directed by Engr-In-Charge.

(d) All as per item No 90 here in before but for Table bed side with one coat black synthetic enamel paint on MS square pipe complete

BIN SOILED LINEN MULTIPURPOSE:- FD/E6/MAP/09 (a) Replacement of Back of Bin Linen Multipurposee shall be made out of 6mm thick commercial ply wood make ISI marked.

(b) Replacement of Top shall be of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as directed by Engineer in charge.

(c) Replacement of sides shall be of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as directed by Engineer in charge.

(d) Replacement of shutter shall be of 18mm thick prelaminated MDF Board exterior grade and with 4mm thick teak wood beading all as directed by Engineer in charge.

(e) All as item No 90 here in before but for Bin linen Multipurpose

Laxmi Furnitures & Engg