GE/BAS-03/2025-26 Repair and maintenance of security lights, road lights, solar lights and its allied services at Basoli station under GE Basoli

Amount

Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in hard and dense of soil complete all as specified and directed.

M&L returning, filling and including spreading, levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point, complete all as specified and directed.

Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed. (Punned thickness shall be measured)

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed .

M & L for GI pipe in replacement ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including suitable size clamps complete of size 50 mm bore , all as specified and directed by Engr-in-charge.

Maintenance and repair to existing street / perimeter security lights fittings / solar lights etc of any type / size/ wattage from date of work order / physically handing over site to contractor as nature the work is of urgent requirement keeping security of areas and any specifications, fittings / fixed of poles, buildings or watching towers of any heights, finding faults in LT feeder and light fittings, liasoning with connectioning sub station of MES, reporting to concerned JE E/M and Engr-in-Charge about the faults complete manpower for repair including rectifying the same by replacing defective spare parts as per direction by concerned JE E/M and Engr-in-Charge at various location complete all as specified and directed for OTM accn at Basoli. Note :- 1. Spare parts of light fitting / fitting shall be measured and paid separately under relevant items of Schedule 'A'/BOQ as supply only as per requirement for repair / replacement however providing manpower on daily basis as quoted above.

Maintenance and repair to existing street / perimeter security lights fittings / solar lights etc of any type / size/ wattage from date of work order / physically handing over site to contractor as nature the work is of urgent requirement keeping security of areas and any specifications, fittings / fixed of poles, buildings or watching towers of any heights, finding faults in LT feeder and light fittings, liasoning with connectioning sub station of MES, reporting to concerned JE E/M and Engr-in-Charge about the faults complete manpower for repair including rectifying the same by replacing defective spare parts as per direction by concerned JE E/M and Engr-in-Charge at various location complete all as specified and directed for MD accn. Note :- Spare parts of light fitting / fitting shall be measured and paid separately under relevant items of Schedule 'A'/BOQ as supply only as per requirement for repair / replacement however providing manpower on daily basis as quoted above.

Supply only LED street light driver of capacity 25 to 40 watt, make of LED driver as per suitable light fitting of make and type as per sample complete all as specified and directed

Supply only LED street light driver of capacity 45 to 60 watt, make of LED driver as per suitable light fitting of make and type as per sample complete all as specified and directed

Supply only LED street light driver of capacity 70 to 100 watt, make of LED driver as per suitable light fitting of make and type as per sample complete all as specified and directed

Taking out old U/S damaged street light fittings and M & L for Providing street light fitting of capacity 90 Watt LED fitting,5700 K made up of pressure die cast aluminium housing with toughened glass and individual high power LEDs with secondary optics, IP-66 protection and impact resistance of IK-07 complete including 2.00 RM, 3 core, 1.5 Sqmm copper wire for each light fitting , complete all as specified and directed.Make-Wipro ,cat part no : LR02-102-XXX-57-G2 / Cromton , cat part no :TRP-425-90-57-HL2-LM-NBK/Orient,cat part no : LSFS-090-C/Polycab,cat part no: PCGLS C4 90 W complete all as specified and directed.

Taking out old U/S damaged street light fittings and M & L for Providing street light fitting of capacity 60 Watt LED fitting,5700 K new generation energy saving and environmental friendly long life LED street light fitting made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover with IP-65 protection and impact resistance of IK-07 complete including 2.00 RM, 3 core, 1.5 Sqmm copper wire for each light fitting etc complete all as specified and directed. Havells Cat Part ENDURASUNDOWNSL60WLED765PASYBOTG/Wipro ,cat part no : LR02-671-XXX-57-G3 / Cromton ,cat part no :TRP-421-60-57-SL-LM-NBK/Orient,cat part no : LSFS-060-C complete all as specified and directed.

Taking out old U/S damaged street light fittings and M & L for Providing street light fitting of capacity 70 Watt LED fitting,5700 K energy saving and environmental friendly long life LED street light fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP-65 protection and impact resistance of IK-07 complete including 2.00 RM, 3 core, 1.5 Sqmm copper wire for each light fitting etc taking out old U/S damaged street light fittings, complete all as specified and directed. Havells Cat Part ENDURASUNDOWNSL70WLED765PASYBOTG/Wipro ,cat part no : LR02-681-XXX-57-G3/ Cromton ,cat part no :TRP-421-70-57-SL-LM-NBK complete all as specified and directed.

Taking out old U/S damaged flood light fittings and M & L for Providing LED Flood Light luminaire in pressure die-cast aluminium housing with IP66 protection of capacity 70 watts, 230 volts, 50 Hz, area lighting including 70 watts LEDs and driver Make: Havells Cat Part JETALEGANZAFLS70WLED757P60DTOTG/ Cromton ,cat part no :TFS-504-100-57-NL-SL-GL-NBK/Orient,cat part no : LFSMU-070-C complete all as specified and directed.

Taking out old U/S damaged flood light fittings and M & L for Providing LED Flood Light luminaire in pressure die-cast aluminium housing with IP66 protection of capcity 100 watts, 230 volts, 50 Hz, area lighting including 100 watts LEDs and driver .Make of flood light: Havells Cat Part JETALEGANZAFLS100WLED757P60DTOTG/ Cromton ,cat part no :TFS-504-70-57-60D-SL-GL-NSG/Orient,cat part no : LFSMU-100-C complete all as specifed and directed.

M & L for 1100 volts grade heavy duty cable PVC insulated aluminum conductor of size 16 Sqmm served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspensions wire wire including taking down old unserviceable complete all as specified and directed.

M & L for 1100 volts grade heavy duty cable PVC insulated aluminum conductor of size 10 Sqmm served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspensions wire including taking down old unserviceable complete all as specified and directed.

M & L for providing 3 core (flexible) PVC insulated unsheathed 1.5 Sqmm copper cable for connection to security light from junction box including taking out old U/S damaged cable, complete all as specified and directed.

Replacement of junction box of minimum size 30cm (height) x 20 cm (width) x 15 cm (depth) made of steel sheet 1.6 mm thick duly painted with two coat of synthetic enamel paint over a coat of red oxide primer having aluminium bus bar 4 Nos of capacity 63 Amps with minimum 04 Set of nuts, bolts & washers on each busbar mounted on porcelain/PVC insulator having 01 No MCB, SP, 16 Amps. Junction box shall be fixed on pole & including suitable ,MS strip, nuts, bolts & washers suitable for bottom entry of cable of size upto 25 sqmm including suitable cable glands, thimbles complete all as specified and directed.

Supply and fixing for XLPE insulated screened,PVC bedded galvanised steel strip & wire armoured electric power cable ( heavy duty) 1100 volts grade of size 50 sqmm, 3.5 core with stranded aluminium conductor including proper connection to LT panel / bus bar with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables, complete all as specified and directed. (Note – Necessary excavation, returning, filling in,removal of soil ,sand cushioning, brick work and GI pipe shall be measured and paid under respective item of BOQ).

Supply and fixing for XLPE insulated screened,PVC bedded galvanised steel strip & wire armoured electric power cable ( heavy duty ) 1100 volts grade of size 25 sqmm, 4 core with stranded aluminium conductor including proper connection to LT panel / bus bar with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed. (Note – Necessary excavation, returning, filling in,removal of soil ,sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).

Supply and fixing for XLPE insulated screened,PVC bedded galvanised steel strip & wire armoured electric power cable ( heavy duty ) 1100 volts grade of size 16 sqmm, 4 core with stranded aluminium conductor including proper connection to LT panel / bus bar with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed. (Note – Necessary excavation, returning, filling in,removal of soil, sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).

ANIL ENTERPRISES (BID ID -3337688)

dinesh enterprises (BID ID -3320724)

dadwal engineers (BID ID -3329544)

JAI DURGA CONSTRUCTION CO (BID ID -3329689)

M/S SURINDER KUMAR MAHAJAN (BID ID -3328967)

G.M. ENGINEERING SERVICES (BID ID -3328554)

M/S OM SAI RAM BUILDERS (BID ID -3329454)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3329757)