SPECIAL REPAIRS TO BLDG NO P 06 AND ROOF TREATMENT EXTERNAL WALL PLASTERING EXTERNAL PLUMBING AND SOIL SEWAGE OUTLETS IN BLDG NO P 16 OFFICERS MD ACCN AT KARORA COMPLEX OF ARMY AREA COIMBATORE AND PROVISION OF PARKING SHED FOR OR MD ACCN BLDG NO P 07

Demolition of cement concrete of any description (unreinforced) in any position otherwise specifically provided for including roof felt and plastering etc complete all as specified and directed.

Providing PCC 1:2:4 Type - B0 (Using 12.50 mm graded aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete, tank platform, coving etc on roofs, chajjas complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 using water proofing compound on concrete surfaces of roofs including parapets, chajjas etc and providing necessary slope all as specified and directed.

Supply only Liquid water proofing compound for waterproof plastering complete all as specified and directed.

Roof treatment with following specification completely, complete all as specified and as directed by Engineer-in-Charge :- (i) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces (ii) Laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Cleaning the surfaces and finally painted at the top with two coat of bituminous aluminium paint all as specified and Directed.

Demolition of cement concrete of any description (reinforced) in any position like chimney and RCC Tank similar items etc complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and Directed

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed

Brickwork old size bricks with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 Complete all as specified and directed.

Material and labour for half brick work old size bricks with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 Complete all as specified and directed.

Rendering 5mm thick in cement mortar 1:4 with WPC over a coat of 10mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work/ Stone or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick rendering in cement mortar 1:3 to ceiling on fair faces of concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Raking out joints/pointing to square rubble masonry wall course or uncoursed in cement mortar etc complete all as specified and directed.

Flush pointing to squared rubble masonry, coursed or uncoursed in cement mortar 1:4 etc complete all as specified and directed.

Walling of Square rubble masonry,uncoursed, well bonded bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed.

All as per item No 17 herinbefore but except stones all as specified and directed.

Cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises all as specified and directed.

Sheet glass 4.0mm thickness ordinary quality and glazing with oil putty/ wooden beads in square n exc 0.5 sqm in each pane complete all as specified and directed.

Powder coated (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in to steel/ wooden joinery all as specified and directed.

Ground or obscured or frosted sheet glass 3 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in repairs to steel / wooden joinery complete all as specified and directed.

Plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in filling concrete inside steel frame, bed block or hold fasts including necessary form work all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 125mm size all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section 150mm length all as specified and directed.

Aluminum alloy handles, fabricated type ,anodised extruded section 150 mm long all as specified and directed.

Taking up or down steel tubing and connections,including cleaning for refixing or removal to store bore of pipe 15 mm complete all as specified and directed.

15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings concealed or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections,including cleaning for refixing or removal to store bore of pipe 20 mm complete all as specified and directed.

20mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings concealed or laid in floors complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

Supply and laying 16mm of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supply and laying 20mm of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Taking down existing Eave gutters, drain/ soil/ waste/ vent pipes including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) of any description and in any position of any size all as directed

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) 110mm dia pipe single socketed in any length, with rubber ring joint fixed to walls with clamps complete all as specified and directed.

PVC (SWR) bends any radius, 110mm bore with oval access door complete all as specified and directed.

PVC (SWR) bends any radius, 110mm bore complete all as specified and directed.

110mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door all as specified and directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete all as specified and as directed.

PVC (SWR) bends any radius, 75mm bore with oval access door complete all as specified and directed.

PVC (SWR) bends any radius, 75mm bore complete all as specified and directed.

75mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door all as specified and directed.

PVC (SWR) floor trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed.

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed.

PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece single, (single Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

Brass chromium plated bottle trap 32 mm for wash basins with inlet and outlet screwd for pipe or connections including necessary packing, union and cap all as specified and directed.

PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and as directed.

Vitreous China wash down water closet pan (pedestal pattern), white including supply and fix of Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (excluding fixing bolts, flushing cistern and flush pipe) including fixed in repairs complete all as specified and directed.

Supply and fix in repairs 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC 32mm dia flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed.

Supply and fix in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including waste coupling/fittings 32mm dia, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

Supply and fix in repairs of Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

Supply and fix in repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and directed

Brass chromium plated shower rose 100 to 125 mm size, swivel type with arm, fixing with 15mm dia pipe fixed in repairs all as specified and directed.

Supply and fix in repair stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed complete all as specified and directed.

Gunmetal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed fixed in repairs complete all as specified and directed.

Supply and fix in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed

Supply and fix in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of flooring and pavings complete all as specified and directed.

Chequered cement concrete tiles 20cm x 20cm x 25 mm or 30cm x30cmx25mm thick as directed , set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments and including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil all as specified and directed.

Removing excavated material exceeding. 250 m but not exceeding. 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints without grooves (thickness of joints except at sharp curve shall not to more making drainage opening wherever required complete all as specified and directed.

Preaparation of new wall surfaces and applying two coat of Exterior weather proof emulsion paint over a coat of exterior primer all as specified and directed.

75 mm thick PCC 1:2:4 type B1(using 20 mm graded agg) as in plinth protection laid and finished in bays not exceeding 2 sqm in paln and filling the joints with mastic bitumen complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of stone slabs and granite/ tiles of any description or thickness in floors , aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

20mm thick Granite (of any type) tiles machine cut, in skirting/ dado/ counter top laid cement screed base 20mm thick in cm 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Mirror polishing on marble/ granite/ Kota stone/ stone/ cudappah work where ever required to give high gloss finish complete all as specified and directed.

Concrete bed to 100/ 110mm bore drain pipes in PCC 1:4:8 type D-2 including packing under and haunching against the sides of pipes after they are laid and tested all as specifed and as directed.

Returning, filling in including spreading, levelling, watering and well ramming using excavated soil in layers not exceeding 25cm thick complete all as specified and directed

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Glazed ceramic tiles coloured 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl 10mm thick in cement mortar 1:3 as backing coat for fixing dado tiles all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed.

Complete removal of existing wall finishes and filling the cracks with crack filling putty as required and applying two coat of oil bound distemper complete all as specified and directed.

Complete removal of existing wall finishes and filling the cracks with crack filling putty as required and applying three coat of white wash complete all as specified and as directed.

Complete removal of existing finish of ceilings & filling the cracks with crack filling putty as required and applying three coat of white wash complete all as specified and as directed.

preparing surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty and a coat of primer on newly plastered wall surface complete all as specified.

Preparation of old steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old wood surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of existing wall finishes and filling holes and undulations with wall putty as required and applying two coat of Exterior weather proof emulsion paint over a coat of exterior primer all as specified and directed.

Disconnecting 1000 lit tank existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and as directed

Disconnecting 500 lit tank existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and as directed

Supply and fix in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including post etc. Fe-410-W(Gde E-250)quality B complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Applying three coats of whitewash in ceiling on newly palstered surfaces including preparation all as specified and directed.

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and directed.

Plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in forming channel in drain & coping all as specified and directed.

precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab of manholes set in cement mortar (1:4) incl necessary formwork all as shown on drawing (Reinforcement measured separately) all as specified and directed.

Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers, binders, etc complete all as specified and directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar 1:3 into dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete including fixed in repairs all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof covering complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering, crimp sheet/cladding to wall, fixed with self tapping screws and embedded with cement mortatr etc as required all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work/ Stone or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

External rendering 5mm thick in cement mortar 1:4 with liquid water proofing compound over a coat of 10mm thick in cement mortar 1:6 over brick or concrete surfaces finished even and fair all as specified and as directed. Note: W.P.C shall be measured and paid separately.

Rendering 10mm thick in cement mortar 1:4 using water proofing compound on concrete surfaces of roofs including parapets, chajjas etc and providing necessary slope all as specified and directed.

Preparation of new plastered wall surface and applying two coat of cement base paint over a alkali resitant primer on wall surfaces complete all as specified and directed.

Applying three coats of whitewash on newly plastered wall surfaces all as specified and directed.

PVC (SWR) branch piece single, (single Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

Disconnecting existing 1000 Ltrs tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing 500 Ltrs tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 1000 Ltr hoisted and fixed in position with proper inlet and outlet connections and taking down the old tank of any type complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 500 Ltr hoisted and fixed in position with proper inlet and outlet connections and taking down the old tank of any type complete all as specified and directed.

20mm dia nipple of PTMT, suitable for HDPE water tank min weight 45 gms complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

25mm thick plain cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in sub floor, sub bases, floors and pavings etc complete all as specified and directed.

Plain cement concrete type B2 1:2:4 (using 40mm graded aggregate) in foundations, filling and mass concrete like ladder base/ bed concrete etc complete all as specified and directed.

Site clearance in any type of soil all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.50M in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) each in hard /dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, but depth beyond 1.5m for pole complete all as specified and directed

Plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in post hole foundations complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed.

75mm thick plain Cement concrete type C-2 , 1:3:6, using 40 mm graded stone aggregate as in plinth protection, hard standing and path finish even and smooth without using extra cement complete all as specified and directed.

50mm thick cement concrete 1:2:4 type B0 using 12.50mm graded stone aggregate as in sub base, floors and paving complete all as specifed and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, hollow/ tubular section) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment .Fe 410-W (Grade E-250) Quality-A complete all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. and with existing colour all as specified and directed.

Colour code point wiring with FRLS PVC insulated and unsheathed cable with 1.5 Sqmm copper conductor single core multistrand 1100 volt grade conforming to IS 694 drawn through PVC casing capping of suitable size, with suitable size flush box covered with 3mm thick plastic laminated sheet cover for fixing sockets/ switches etc surface mounted on wall and 1.5 Sqmm conductor as earth continuity to connecting common earth dolly one light point controlled by one switch 5 amps complete all as specified and directed.

All as per item No 137 herinbefore but one fan/ exhaust fan point controlled by one switch 5 Amps all as specified and directed.

All as per item No 137 herinbefore but one socket outlet 3 pin 5 amps on independent board all as specified and directed.

All as per Item No.137 hereinbefore but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed.

All as per Item No.137 hereinbefore but 2.5 Sqmm PVC insulated and PVC unsheathed copper multi stranded conductor cable and 4 sqmm multi stranded copper conductor for earth wire for 3 pin 15 Amps power points all as specified and directed.

Switch Piano flush button single pole one way 6 Amp 240V, 50Hz AC, ISI marked complete all as specified and directed

Switch socket combination 2 in 1 , 6 Amps flush type with all as specified and directed.

Switch socket combination 2 in 1, 3 Pin, 6 amps and 16 Amp flush type 230V, 50Hz AC, ISI marked all as specified and directed

Step type electronic fan regular flush type all as specified and directed.

Ceiling rose, three terminals PVC / polycarbonate, isolated body complete all as specified and directed

Bell push, Flush type, single pole 5 Amps one way complete all as specified and directed.

Call bell buzzer, ding dong AC 230 volts single pole omplete all as specified and directed.

LED light fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifie and directed. Make: Luker Cat Part No. Luker: LT520P or equivalent in Havells/ Bajaj/ Crompton

LED Light fitting mirror type with high out put diffuser 2 feet, 1 x 10watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A SP MCB all as specified and directed.

Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed.

Supply and fix in replacement of MCB DB, SPN 8 way suitable for single phase 240 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCBs single/ double pole including dismantling of old existing complete all as specified and directed.

Supply and fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32 AMP in the MCB DB complete with connection testing and commissioning all as specified and directed.

Schedule of Credit (Minus) Rs. 45613.20 NOTE: Bidder shall insert credit amount of Rs. 45613.20 as rate in Green field under Col-5.