CA NO GE/-59/2020-21 PETTY REPAIR OF E/M WORKS TO SIGNAL ENCLAVE SANJAY VIHAR 5 HQ SIG GP 500 (I) SIG COY OLD NEW APS COLONY AREA OF AGE E/M UNDER GE(CENTRAL) DELHI CANTT-10

Amount

Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and maintenance work complete on all working days including holidays complete all as specified and as directed by Engr-in-charge, at Sanjay Vihar, OLD, New Aps Colony.

Attending to complaint of unsv switch ,socket ,fan regulator and making of light / power point in casing caping upto 2 mtr of length and maintenance work complete on all working days including holidays complete all as specified and directed by Engr-in-charge, at Sanjay Vihar, OLD, New Aps Colony area.

Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etccomplete all as specified and as directed by Engr-in-charge, Notes for Item No. 1, 2 and 3 (a) Supply only spares shall be measured and paid under relevant item of Sch 'A'/ BOQ (b) Contractors are advised to visit the sites before quoting their rates. (c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (e) Contractor shall provide and deploy adequate experienced Exp. professional to carry out day to day complaints and tradesman will remain present in Sanjay Vihar Complainet Cell from 0830Hrs to 1800 Hrs from Monday to Sunday (02 Electrcian at Sanjay Vihar & 02 Helper) . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account.Note:whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. (f) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 8 hours.

Taking down sub main wiring off sizes etc complete all as specified and as directed by Engr-in-charge,

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection complete all as specified and as directed by Engr-in-charge,

Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Ampcomplete all as specified and as directed by Engr-in-charge,

Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 10 Amp complete all as specified and as directed by Engr-in-charge,

Supply only LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and as directed by Engr-in-charge,

Supply only LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and as directed by Engr-in-charge, (Mirror light)

Supply LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and as directed by Engr-in-charge,

Supply only surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and as directed by Engr-in-charge,

Supply only 14W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz complete all as specified and as directed by Engr-in-charge,

Supply only 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz, complete all as specified and as directed by Engr-in-charge,

Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and as directed by Engr-in-charge,

Supply only replacement of capacitor 2.5 Mfd, 240 V complete all as specified and directed.

Supply only batten holder including with connections complete all as specified and as directed by Engr-in-charge,

Supply only switch piano flush button type single pole one way 6 Amps complete all as specified and as directed by Engr-in-charge,

Supply only switch piano 6 amp SP two way, complete all as specified and as directed by Engr-in-charge,

Supply only socket piano outlet 6 Amp flush button type complete all as specified and as directed by Engr-in-charge,

Supply only bell push single pole 6 Amps complete all as specified and as directed by Engr-in-charge,

Supply only switch piano flush button type single pole 16 Amps. complete all as specified and as directed by Engr-in-charge,

Supply only socket piano outlet, 2 in 1, 3 pin 6 and 16 Amp single pole . complete all as specified and as directed by Engr-in-charge,

Supply only Ceiling fan regulator electronic step switch type 120 Watt 230/250 Volts single phase complete all as specified and as directed by Engr-in-charge,

Supply only switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge.

Supply only switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

Supply only Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified and directed by Engineer in charge.

Supply only swich & socket combined 5 pin 6 Amp sp complete all as specified and as directed by Engr-in-charge,

Supply only swich & socket combined 5 pin 16 Amp sp Make:- Polycab, Anchor or Havells.

Supply only ceiling rose surface PVC 65x50 mm type with three terminals. (For Exhaust Fans) complete all as specified and as directed by Engr-in-charge,

Supply only relacement plug top 16 Amps 3 pin 230- volts complete all as specified and as directed by Engr-in-charge,

Supply only Electric bell Ding-Dong AC 230 Volt etc complete all as specified and as directed by Engr-in-charge,

Supply only MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified and as directed by Engr-in-charge,

Supply only MCCB 100 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified and as directed by Engr-in-charge,

Supply only Single pole MCB 6 to 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity, complete all as specified and as directed by Engr-in-charge,

Supply only in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and as directed by Engr-in-charge,

Supply only in repair MCB DP 20 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and as directed by Engr-in-charge,

Supply only in repair MCB DP 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and as directed by Engr-in-charge,

Supply only in repair MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and as directed by Engr-in-charge,

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 1.5 sqmm with approved colour code complete all as specified and as directed by Engr-in-charge,

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 2.5 sqmm with approved coloured code complete all as specified and as directed by Engr-in-charge,

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 4 sqmm with approved coloured code complete all as specified and as directed by Engr-in-charge,

Supply only replacement copper cable flexible 3 core PVC insulated of size 23/.0076 ll complete all as specified and directed by Engineer-in-Charge

Supply only heating element of 2 KW triangular type with nut bolt washer complete all as specified and as directed by Engr-in-charge,

Supply only heating element of 1.5 KW any type with nut bolt washer complete all as directed. Make-THEETA/BAJAJ/USHA

Supply only non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as specified and as directed by Engr-in-charge,

Supply only for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

S&F of thermostat for 25/35/50 ltrs capacity of geysers complete all as specified and as directed by Engr-in-charge,

Supply only SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete all as specified and directed by Engineer-in-Charge

Supply only hylum sheets 3 mm thick (ISI marked) of the following sizes :- Make :-As per sample.

Sheet 4" x 4" single cutting suitable for one piano switch

Sheet 4" x 4" two cuttings suitable for two piano switches

Sheet 4" x 7" three cuttings suitable for three piano switches

Sheet 4" x 7" one cutting for 6 Amp socket and two cuttings for piano switches

Sheet 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

Sheet 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

Note :- Total amount of Sch of credit is Rs. 42350.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

Pall Associates

GIAN ENGINEERS

aggarwal engineers contractors

M/s Sohanil Construction

Usha Contractors and Engineers