Interior Fit-Out Work in the office space of National Institute of Immunology NII, BRIC Office at NSIC Complex, Okhla, New Delhi

GENRAL ABSTRACT OF COST

Name of Work : INTERIOR/ FURNISHING WORK OF NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI.

Sub Head No. Description DSR NDSR/MR Total

CHAPTER-1 CIVIL CONSTRUCTION

SH.1 Carriage Of Materials 1,803.00 0.00 1,803.00

SH.3 Reinforced Cement Concrete Work 0.00 0.00 0.00

SH.10 Repairs To Building 28,140.00 0.00 28,140.00

SH.11 Dismantling And Demolishing 7,520.00 0.00 7,520.00

SH.12 Sanitary Installations 195,100.00 240,356.20 435,456.20

SH.15 Water Proofing 12,257.00 0.00 12,257.00

SH.16 New Technologies And Materials 828,072.00 1,043,271.25 1,871,343.25

SH.16.1 Sliding & Folding Partition 426,250.00 426,250.00

SH.18 Conference Room 7,368,246.00 7,368,246.00

SH.19 Active & Passive Work 1,635,878.98 1,635,878.98

SH.25 Server Room Allied Services 3,506.00 2,263,600.00 2,267,106.00

Total of Schedule Items (CI applicable) (A) : 7,040,667.99

Total of NDSR Items (CI not applicable) (B) : 22,162,921.61

Net Total (C=A+B) including GST: 29,203,589.60

Total Including GST (Say): 29,203,589.00

Digitally signed by AMIT

ABSTRACT OF COST

Name of Work : INTERIOR/ FURNISHING WORK OF NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI.

RATE DSR AMOUNT

I.NO DESCRIPTION UNIT QTY NDSR AMOUNT CODE

SH CARRIAGE OF MATERIALS 1.00

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste

material by mechanical transport including loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of

Engineer-in-charge.

Note - item to be applicable in urban areas having directions for restricted hours for

movement/ plying of load carrying motor vehicle of 3.5 cum or more.

Total Carried Over to Abstract for Sub Head: 1.00 Carriage Of Materials : 1803.00 0

SH CONCRETE WORK 2.00

CEMENT CONCRETE (CAST IN SITU)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string

2.1 or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, 4.2

sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

Total Carried Over to Abstract for Sub Head: 2.00 Concrete Work : 178114.00 0.00

SH MASONRY WORK 4.00

AUTOCLAVED AERATED CEMENT BLOCKS-AAC

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC

blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1

cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm

dia M.S. bars at every third course of masonry work.

Total Carried Over to Abstract for Sub Head: 4.00 Masonry Work : 30586.00 0.00

SH CLADDING WORK 5.00

Digitally signed by AMIT

Providing and fixing 12 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 18 mm thick

thick BWP ply board, joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high

gloss finish etc. complete at all levels.

Providing and fixing angle-iron frames for of mild steel sections, joints mitred with necessary

welding at junctions and fixing the frame to wall with steel dash fasteners of 8 mm dia, 75

mm long bolt, and applying a priming coat of approved steel primer.

A Granite stone slab colour black, Cherry/Ruby red 8.2.2

(ii) Area of slab over 0.50 sqm sqm 12.43 5136.3 63834 8.2.2.2

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

5.2 machine polishing to edge to give high gloss finish etc. complete as per design approved 8.3

by Engineer-in-Charge.

Granite work metre 20.00 418.85 8377

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

5.3 and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. metre 7.45 568.55 4236 8.4

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges

Total Carried Over to Abstract for Sub Head: 5.00 Cladding Work : 82319.00 0.00

SH WOOD AND P.V.C. WORK 6.00

VISION PANEL GLAZING

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed

shutters for doors, windows and clerestory windows (Area of opening for panel inserts

excluding portion inside grooves or rebates to be measured). Panelling for panelled or

panelled and glazed shutters 25 mm to 40 mm thick :

A Float glass panes 9.7.7

(i) 5.0 mm thick glass panels (weight not less than 12.50 kg/sqm). sqm 0.72 2600.45 1872.00 9.7.7.2

FLUSH DOOR SHUTTER

Digitally signed by AMIT

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and

well matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

A 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 24.00 2392.65 57424.00 9.21.1

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass

excluded) (overall area of door shutter to be measured):

A Rectangular or square 9.24.1

Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of

door shutters to be measured).

A Decorative type door 9.25.1

GYPSUM BOARD PARTITIONS

Poviding and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and

ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the

floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm

6.7 dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and 9.105

the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of

610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both

ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon

plugs at spacing of 450 mm centre to centre,

and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs,

floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be

fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of

99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to metal flat head screws,

including jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two

coats of primer suitable for board as per manufacture's specification and direction of

engineer in charge all complete.

Digitally signed by AMIT

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced

A Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification sqm 120.00 2131.1 255732.00 9.105.1

HIGH PRESSURE LAMINATED SHEET FACING

Providing & fixing decorative high pressure laminated sheet of plain /wood grain in gloss /

matt/ suede finish with high density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch &

6.10 Lock on back side of the Panic Latch of reputed brand and manufacture to be approved each 1.00 8366.15 8366.00 9.139

by the Engineer- in- charge, all complete.

COMMERCIAL PLY PLAIN LINING

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat

6.11 of approved primer on one face, and fixed on wooden /steel frame work, complete as per 9.140

direction of Engineer-incharge (Frame work shall be paid for separately).

A 12 mm thick commercial ply conforming to IS : 1328 BWR type sqm 25.00 1224.65 30616.00 9.140.1

MILD STEEL TUBE FRAME WORK

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow

MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm

centre to centre both ways (vertically & horizontally) or at required spacing near opening,

6.12 with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel kg 350.00 166.8 58380.00 9.154

dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for

doors, windows, electrical conduits, switch boards etc., including providing with two coats

of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

DOOR FRAME FOR SOLID FIRE RATED WITH VISION PANEL

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x

60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc

coating not less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door

Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ .

The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4

on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory

made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed

shutter . The frame shall be finished with a approved fire resistant primer or Powder coating

of not less than 30 micron in desired shade as per the directions of Engineer - in- charge .

(Cost of SS ball bearing hinges is excluded).

DOOR SHUTTER FOR SOLID FIRE RATED WITH VISION PANEL

Digitally signed by AMIT

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating

confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory

approved by Engineer-in-charge, with suitable mounting on door frame, consisting of

vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm

6.14 made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral sqm 5.75 12017.9 69103.00 9.162

wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball

bearing hinges of size 100x89x3mm of approved make, including applying a coat of

approved fire resistant primer or powder coating not less than 30 micron etc all complete

as per direction of Engineer-in-charge (panelling to be paid for seperately).

GLAZING FOR VISION PANEL SOLID FIRE RATED DOOR SHUTTER

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with

G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of

size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and

150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating

of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc

complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of

Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance

both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The

manufacturer have to give test report/certification of fire glass and the glass should have

the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL

accredited lab or by any other accreditation body which operates in accordance with

ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes

shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or

BACK PLY/ BOARD

Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle

board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel

screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen

counter etc. all complete as per direction of Engineerin-charge.

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side

balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved

brand including 2mm thick PVC edge banding tape with hot glue by edge bending

machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per

direction of Engineerin-charge.(Payment of providing and fixing auto closing hinges shall

be paid separately)

Digitally signed by AMIT

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade

marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and

drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic

type) of approved make/brand to cupboard shutters with full threaded steel screws

including making necessary recess in board and finished etc. complete as per direction of

Engineer-in-charge

For single glazed style door shutters including providing and fixing hinges/ pivots and

6.20 making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15-Area of door upto 2.50 sqm)

D TYPE OFFSET PULL HANDLE

Providing and fixing stainless steel Grade 304 Assa Abloy/ Geze/ Dorma TGDI D type Offset

6.21 Pull Handle 600 mm long, bar outer dia 25 mm, center to center 600 mm, Back to back each 12.00 6334.10 76009.20 MR 7

fixing with suitable fixing accessories etc .complete as per direction of Engineer-in-Charge

NARROW STILE MORTISE LOCK WITH EPC

Providing and fixing Assa Abloy/ Geze/ Dorma 917 Narrow stile mortise dead lock having 35

mm Backset including Euro Profile Cylinders with Both Side Key - 70 mm (best make of

approved quality) for glazed aluminium auoustic doors including necessary cutting and

making good etc. complete.

SLIDE CHANNEL DOOR CLOSER

Providing and fixing Assa Abloy/ Geze/ Dorma TS 70 aluminium extruded section body slide

channel door closer, closing force adjustable size EN 3–4(door weight upto 36 kg to 80 kg

and door width from 701 mm to 1100 mm), tested according to EN 1154 with necessary

accessories and screws etc. complete.

MORTISE LOCK WITH EPC FOR TOILET

Providing and fixing Assa Abloy/ Geze/ Dorma 285 WC mortise dead lock having 55-80 mm

Backset, CE certified Approved for fire-rated doors including Strike Plate (best make of

approved quality) for glazed aluminium auoustic doors including necessary cutting and

making good etc. complete.

Providing and fixing stainless steel Grade 304 Assa Abloy/ Geze/ Dorma TDLH 8100 Lever

Handle with 6501 Roses,6612 Escutcheons,8mm Spindle with Fixing Screws for door thickness

35-55 mm, Back to back fixing with suitable fixing accessories etc .complete as per

direction of Engineer-in-Charge

Digitally signed by AMIT

SS BALL BEARING HINGES

Extra for providing SS ball bearing hinges instead of ISI marked Stainless Steel butt hinges

bright finished of required size with necessary screws. (Shutter area to be measured).

Total Carried Over to Abstract for Sub Head: 6.00 Wood And P.V.C. Work : 740853.50 671930.90

SH FLOORING WORKS 7.00

VITRIFIED FLOOR TILES

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of

7.1 approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 11.41

cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

the joints with white cement and matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70

7.2 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per 11.48

kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

GRANITE STONE FLOORING

Providing and laying flamed finish Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

A Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 10.00 3186.7 31867.00 11.55.1

RAISED/FALSE ACCESS FLOORING

Digitally signed by AMIT

Providing and fixing removable raised/false access flooring with system and its components

of approved make for different plenum height with possible height adjustment upto 50 mm,

7.4 comprising of modular load bearing floor panels supported on G.I. rectangular stinger 11.54

frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as

specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI

tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I.

Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer

diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm,

locking and stabilizing the pedestal head in position at the required level. The pedestals

shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of

approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the

pedestal head using fully threaded screws ensuring maximum lateral stability in all

directions, the grid formed by the pedestal and stringer assembly shall receive the floor

panel, this system shall provide adequate solid, rigid support for access floor panel, the

system shall provide a minimum clear uninterrupted clearance between the bottom of the

floor for electrical conduits and wiring etc. all complete as per the architectural drawings,

as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel

anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be

steel welded construction with an enclosed bottom pan with uniform pattern of 64

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom

0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along

each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland

cementitious core mixed with lightweight foaming compound.

Digitally signed by AMIT

The access floor shall be factory finished with Anti-static High Pressure laminate with Non

Warp technology upto 1mm thickness for superior adhesion and Surface flatness within

0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x

25mm without collapse in the centre of the panel which is placed on four steel blocks. The

panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an

impact load of 50kg all complete as per the approved manufacturers specification and as

per the direction of Engineer-in-charge. All specification must be printed on the side of the

panel to ensure the quality of the product

A 450 mm Finished Floor Height (FFH). sqm 3.00 5977.35 17932.00 11.54.2

Deduct for not grouting the joints with white cement and matching

pigment in the items of fixing of vitrified tiles

WOODEN FLOORING

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws

complete with :

a Second class teak wood sqm 0.00 4187.95 0.00 11.33.1

Providing and laying of 2mm conductive Vinyl rolls as specified and indicated. The cost to

include preparing surface to receive vinyl flooring requirements like the floor to be

absolutely leveled, hard, dried, even and free from dirt, grease, moisture , and fixed using

required adhesive ( water based adhesives like Arobond 44 of Colourbond mktg/VC 31 of

Pidilite Ind. ) and correct laying technique. The make of vinyl flooring shall be of Armstrong

or equivalent of which the specs / samples have to be submitted for approval.

Flammability : B1 Class

Sound Absorption : 3 dB

Sheet width/length : 180/16-25 cm/m

Tile side length : 60.8/60.8 cm/cm

Total wt : 2.9 kg/m2

Colour fastness : 6 stage

Electrostatic loading limit : <2 Kv

Thermal resistance : 0.010 m2K/W sqm 10.00 2362.45 23624.50 MR 17

CARPET TILE FLOORING

Digitally signed by AMIT

Providing & fixing of Tufted / Textured / Graphic Loop Pile Carpet Tile flooring of approved

make & shade for Medium- Heavy duty Commercial applications, having pile height of

9mm, tufted Weight of 24-26 oz/yd2, average density >7,000 oz/yd3 , 100% Solution Dyed,

8.0 Stitches per Inch, 0.112 in Finished Pile Thickness, Primary Backing of non-woven

Environment friendly, Recyclable, PVC Free, with high recycled content material. Fiberglass

Reinforced Thermoplastic Composite Secondary Backing containing not less than 39% post

consumer and/or post industrial material content, Soil Protection, Class I Radiant Panel

confirming to ASTM E 648, NBS Smoke < 450 confirming to ASTM E 662, Must pass both Part 2

and Part 3 of AATCC 174 with a minimum of 90% reduction both gram negative and gram

positive bacteria and no macroscopic growth against the fungi., Built-in Permanent

Conductive Fiber Electrostatic Propensity of Less Than 3.5 kV, including covering of the laid

carpet with 1mm. Thk plastic sheets, with proper taping of the joints and shampooing of the

carpet prior to handover all complete as per the approved manufacturers specification

and as per the direction of Engineer-in-charge.

Total Carried Over to Abstract for Sub Head: 7.00 Flooring Works : 259919.00 839499.50

SH ROOFING WORKS 8.00

PLAIN GYPSUM BOARD CEILING

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating

of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia

x 230 mm long G.I. wire at every junction,

Digitally signed by AMIT

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450

mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x

25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and

two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

(Board with BIS certification marks)

GI METAL GRID CEILING

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38 mm made from 0.30

mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25

mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at

600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length

600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at

8.2 middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 12.52

24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke

detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size

27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm

GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at

1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections

shall be pre-painted with polyester paint, all complete for all heights as per specifications,

drawings and as directed by Engineer-in-charge.

Digitally signed by AMIT

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm

and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm

(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC

(Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of

thickness 60 microns (minimum), including factory painted after bending and perforation,

and backed with a black Glass fiber acoustical fleece.

ROCK WOOL THERMAL INSULATION

Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183,

having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall

with screw, rawel plug & washers and held and in position by criss cossing GI wire etc.

complete as per directions of Engineerin- Charge.

Total Carried Over to Abstract for Sub Head: 8.00 Roofing Works : 224477.00 0.00

SH FINISHING 9.00

INTERIOR FINISHING

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture

on wall surface :

9.2.1 Water thinnable cement primer sqm 20.45 64.45 1318.00 MR

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per

manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of

Special primer applied @ 0.75 ltr /10 sqm

LIGHTWEIGHT GYPSUM PLASTER

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum

lightweight plaster having additives and light weight aggregates as vermiculite/ perlite

9.4 respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven sqm 104.10 468.9 48812.00 13.78

background such as bare brick/ block/ RCC work on walls & ceiling at all floors and

locations, finished in smooth line and level etc. complete.

MELAMINE CLEAR POLISH

Polishing in high gloss/matt finish melamine clear polish on wood work in required

color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand

paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st

coat and 2nd coat is allowed to dry for 8 to 12 hrs.

Digitally signed by AMIT

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water

to remove excess sealer layer and make the surface further smooth after this wet rubbing,

then surface is applied with special grade melamine fillers to fill all the small and big

holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet

rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish

and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then

this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs.

The final melamine polish is applied with compressor pressure spray gun using melamine

clear polish and melamine thinner mixed in required proportion complete as per direction

of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

9.6 GYPSUM BOARD LINING

Providing and fixing of plain gypsum plaster board conforming to IS: 2095 Part - 1:2011

(Board with BIS certification marks) to existing dry partition using metal to metal flat head

screws, including jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher

and two coats of primer suitable for board as per manufacture's specification and direction

of engineer in charge all complete..

12.5 mm thick fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS:

2095: part 3 (Board with BIS certification marks)

12.5 mm thick tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I):

2011 (Board with BIS certification marks)

9.7 COMMERCIAL PLY PLAIN LINING

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat

. of approved primer on one face, and fixed on wooden /steel frame work, complete as per

direction of Engineer-incharge (Frame work shall be paid for separately).

9mm thick Decorative plywood one side decorative veneer and commercial veneer on

other face (Type 1) conforming to IS 1328 BWR Type

9.8 TOUGHENED GLASS 12 MM THICKNESS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in

A Toughened glass 12 mm thickness sqm 55.20 3147.40 173736.48 MR 4

Digitally signed by AMIT

9.9 5.5 MM THICK MIRROR FACING

Providing & fixing silvered glass mirror confirming to IS 3438: 1994 with flat polished edge , to

. MDF base backing with neutral silicone and/or double-sided adhesive pads etc. complete(

MDF base backing to be paid separately).

9.10 6 MM THICK LACQURED FACING

Providing & fixing 6 mm thick annealed SCG Planilaque Evolution (premium GRIHA rated

lacquered glass i.e. textured from saint gobin) with flat polished edge fixed to 5.5 mm thick

. plain MDF board backing with neutral silicone and/or double-sided adhesive pads etc.

,including polishing/MTG all complete as per the drawing & directions of engineer-in-

9.11 WALL PAPER FACING

Providing & fixing fabric backing commercial grade wall paper of approved shade to

MDF/Gypsum board/POP Punning base backing which have 100% washable, scratch

resistance, peel proof, and fire retardant properties, including preparation on the punned

surface for receiving the wall paper, adhesive as per the manufacturer specification, all

complete as per the drawing & directions of engineer-in-charge( Base backing to be paid

Providing and fixing Glass block units, nominally 12 inch x 12 inch shall be partially

evacuated hollow units made of clear, colorless glass with a polyvinyl butyral edge coating

fixed with Mortar shall be 1 part Portland Cement, l/2 part lime, and sand equal to 2% to 3

times the amount of cementitious material (cement plus lime), all measures by volume. (For

exterior glass block panels, an integral type waterproofer should be added to the mortar

mix.). channels, panel anchors to be provided at head and jambs for the purpose of

providing panel support within the opening.

9.15 ROLLER BLINDS

Supplying and fixing Roller Blinds to the following specifications , Fabric shade as approved,

sunscreen, dense basket weave 5 % openness factor. Operation: - Manual. Offset side-

mounted metal chain operated Mounting: Pocket mounted. Shade Orientation: Regular

roll, shade cloth falls at window side of roller. Configuration: Single band AVERAGE LENGTH

OF BLIND is 2.0 M to 2.5 M. The fabric to be Fire Retardent certified.

9.16 BLACKOUT ROLLER BLINDS

. Supplying and fixing of Blackout blinds to the following specs.

Digitally signed by AMIT

Black-out material fibre-glass coated fabric, 12 mils thick, 62 threads per sq in., 0.750 lbs per

sq in. (441g per sq mt.)

Operation: - Manual. Offset side-mounted metal chain operated

Mounting: Closure Box in metal

Shade Orientation: Regular roll, shade cloth falls at window side of roller

Configuration: Single band

The Fabric to be as per approved sample (Fabric should be Fire Retardent Certified).

Cellular Semi Opaque 100% Polyester Hardware SpecificationHeadRail: Head rail is 17 mm

high and 47 mm wide, Thickness 1.00 mm. It is made up of powder coated high strength

aluminum alloy covered by two end caps made up of PVC.Drum & Cradle: They are

molded ABS components with high strength metalic drum which are meant for controlling

the lifting cord.Bottom Rail: This is Aluminum Extruded Rail Made up of High Strength

Aluminum alloy, Which is powder coated in white.Installation Bracket: It is made up of mild

steel with zinc plate.Bottom Rail End Cap: It made up of high strength ABS.White Cord: It is

made of Nylon braided non stretchable thread of 1.2 mm thickness.PVC Slip : It is made up

of high strength PVC of width 25 mm.Fabric: 100% spun bonded non-woven polyester

translucent fabric Pleat dimension 3⁄4” hexagonal cell with a distinct air pockets Sanitized,

Weight : 145 + 5% GSM, Thickness : 0.14 -0.17, colour fastness of light – 4-5 Grade ( DIN EN

S-contour blind Roller Tube: Made up of High Strength Anodized Aluminum alloy Extruded

grooved tube. Size: 40 mm outside diameter (+ 2%); weight = 220gms/running mtr. Control

Unit with Clutch Mechanism: The control unit is made of high strength reinforced plastic. The

clutch is of warp spring design. High carbon steel springs are provided to transmit motion

from the driven mechanism. Clutch is operated directionally by the use of beaded endless

B chain to raise and lower the blind smoothly to decide height. Idler: Idler is of high strength SQM 11.20 8437.00 94494.40 MR 39

reinforced plastic, consisting of an outside sleeve and center shaft. Sleeve provide bearing

surface for center shaft and rotate freely, providing smooth, quiet and long wearing

operation. Bottom Rail: This is made up of high Strength Aluminum alloy Extruded tube,

which is powder coated in white. Size: 51 + 1mm Width. ; Weight = 215 gms/running mtr

(5%).Fabric : composition 100% polyester &fabric width 275 cm .

9.17 Providing & fixing Motor Mechanism nos 7.00 24757.00 173299.00 MR 40

9.18 Providing & fixing Motor Remote 16 channel nos 7.00 17762.00 124334.00 MR 41

9.20 3M & EQUIVALENT SCOTCHCAL FROSTED CRYSTAL

Digitally signed by AMIT

Providing & Fixing 3M & equivalent Frosted Translucent, cast PVC, self-adhesive vinyl,

special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customized

designs, thickness of 2 mil (0.05mm) without adhesive & 3M & equivalentil (0.8)with

adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C).

Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass

Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must Sqm 41.65 2408.00 100293.20 MR 43

be endorsed by 3M & equivalent India Limited Architectural Market Department. Code

Application - DECORATIVE/PRIVACY FILM ON GLASS

Electronically/computer plotter cut. Applied on glass and other rigid, clear substrates.

(partitions, doors, windows etc.) Available in 5 colours

9.21 3M & EQUIVALENT SCOTCH PRINT CONTROLTAC & COMPLY WALL GRAPHICS

Providing & Fixing Digitally reproduced 3M & equivalent Scotch print decorative graphics

on IJ180C (with controltac & comply feature for direct, bubble-free application on walls)

with UV protective matte over laminate 8520 with a polyethylene-coated paper liner.

Customized imagery & the thickness of 2 mil (0.05mm) without adhesive & 3-4mil (0.8-

0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9

kg/cm at 23°C ). the adhesive should be Pressure activated, position able, with air release Sqm 1.00 2500.00 2500.00 MR 44

channels. MCS warranty of 5yrs must be endorsed by 3M & equivalent India Limited

Architectural Market Department.

Application - WALL MURAL-Directly pasted on POP finish wall Conformable & durable

decorative graphics directly applied on walls, ceilings, elevator doors, partitions, pillars,

aluminum cladding etc.Note : Cost of approved image included.

Supplying and fixing of Room Signages in imp.aluminum profile with 3 mm acrylic

9.22 Gents/Ladies pictograph printed on canvas (Room Names) - Include braile letterings Size is Nos 17.00 750.00 12750.00 MR 45

Rest Room - Include braile letterings

9.23 Supplying and fixing of Restroom Signages in imp.aluminum profile with 3 mm acrylic Gents Nos 3.00 750.00 2250.00 MR 46

pictograph printed on canvas (Room Names) - Include braile letterings Size is 6"x10".

Fire Exit ID - 4mm thk. Acrylic base with autoglow vinyl cut letters. 14"x8".Include braile

Fire Extinguisher Signage -Providing and fixing graphical Triangular signage for fire

extinguisher. signage to be made of 3M & equivalentm thick foam board with edge to

edge self adhesive self-luminescent Forex or equivalent vinyl stuck on it. Fix Green vinyl to

cover Forex vinyl leaving 6mm border around edges with 'FIRE EXTINGUISHER' letters cut-out.

(Note : 'FIRE EXTINGUISHER' letters to be self-luminescent and not the background). 'FIRE

EXTINGUISHER' letters height shall be 100mm in HT. 153 X 153

Digitally signed by AMIT

9.26 Advisory / notice signage - 4mm thk. Acrylic base with autoglow vinyl cut letters. 19"x8" Nos 2.00 760.00 1520.00 MR 49

9.27 Providing and fixing SS PUSH/PULL signage for all doors. Size 2"x 6" Nos 12.00 500.00 6000.00 MR 50

9.28 EVACUATION MAP

Providing and fixing evacuation maps of size A3 size, signage shall be made of 3M &

equivalentm thk foam board on to which on to which evacuation plans printed on coated

paper shall be stuck. The signage shall be laminated including the edges. (Note: soft copy Nos 3.00 6000.00 18000.00 MR 51

of the signage shall be provided by architect). signage shall be fixed with 3M & equivalent

double sided adhesive tape. A3

IN CASE OF FIRE USE STAIRS' photo luminescent sign size: 10"x10"mm I sign aluminum profile

with 3M & equivalentm acrylic

Total Carried Over to Abstract for Sub Head: 9.00 Finishing : 321203.00 1971206.45

SH REPAIRS TO BUILDING 10.00

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under,

including cutting the patch in proper shape, raking out joints and preparing plastering the

wall surface with white cement based polymer modified self curing mortar, including

disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Total Carried Over to Abstract for Sub Head: 10.00 Repairs To Building : 28140.00 0.00

SH DISMANTLING AND DEMOLISHING 11.00

Demolishing brick work manually/ by mechanical means including stacking of serviceable

11.1 material and disposal of unserviceable material within 50 metres lead as per direction of 15.7

Engineer-in-charge.

A In cement mortar cum 3.65 2060.2 7520.00 15.7.4

Total Carried Over to Abstract for Sub Head: 11.00 Dismantling And Demolishing : 7520.00 0.00

SH SANITARY INSTALLATIONS 12.00

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white vitreous china

cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),

including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Digitally signed by AMIT

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml

consumption), having water inlet from back side, including fixing to wall with suitable

brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per

the direction of Engineer-in-charge.

#REF! Providing and fixing soil, waste and vent pipes 17.35

(i) (a) Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 Metre 72.00 1169.3 84190.00 17.35.1.3

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron

(spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix

(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost

of cutting holes and making good the walls etc. :

Providing and fixing bend of required degree with access door, insertion rubber washer 3

mm thick, bolts and nuts complete.

(i) (a) Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 4.00 418.95 1676.00 17.38.2.3

#REF! Providing and fixing plain bend of required degree. 17.39

(i) (a) Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 Each 6.00 368 2208.00 17.39.1.3

#REF! Providing and fixing double equal plain junction of required degree. 17.42

(i) (a) Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 Each 4.00 760.7 3043.00 17.42.1.3

#REF! Providing and fixing single equal plain junction of required degree : 17.44

(i) a) Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 6.00 337.85 2027.00 17.44.2.3

Digitally signed by AMIT

Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as

A (i) 65 mm offsets 17.53A.1

#REF! Providing and fixing terminal guard : 17.56

(i) (a) Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 4.00 427.8 1711.00 17.56.1.3

#REF! Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 17.57A

(i) a) SS 304 grade coupling with EPDM rubber gasket Each 3.00 432.05 1296.00 17.57A.1.1

Providing and fixing trap of self cleansing design with screwed down or hinged grating with

#REF! or without 17.60

vent arm complete, including cost of cutting and making good the walls and floors :

A (i) 100 mm inlet and 100 mm outlet 17.60.1

(i) (a) Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 4.00 854.55 3418.00 17.60.1.3

SANITARY INSTALLATIONS

Providing and fixing 18-8 S, type-304, Stainless Steel towel ring round shape 178 mm outside

diameter, 162 mm inside diameter minimum distances of 55 mm from wall face with round

flange concealed fittings arrangement of approved quality and colour all complete as per

manufacturers specification and direction of Engineer-in-charge.

BEHIND MIRROR SOAP DISPENSER BSD

Providing and fixing C.P. brass Behind Mirror Soap Dispenser BSD having sensing range of 05-

12.16 15cm with liquid soap container of 1000 ml capacity including fixing to wall as per each 3.00 11456.55 34369.65 MR 27

manufacturers specification and direction of Engineer-in-charge.

SWING CIRCULAR WASTE CHUTE

Providing and fixing satin finish stainless steel garde 304 swing circular waste chute 240 mm

outside diameter, 200 mm inside diameter and 104 mm high of standard shape including

fixing to countertop all complete as per manufacturers specification and direction of

Engineer-in-charge.

Digitally signed by AMIT

Providing and fixing CP Brass Single Lever Sink Mixer with Swinging Spout (Table Mounted

12.18 Model) with 450mm Long Braided Hoses of quality & make as approved by Engineer in

A 15 mm nominal dia each 0.00 5650.90 0.00 MR 29

Providing and fixing CP Brass Dual-lever-handle two-hole widespread 8” Wall Mounted Pre-

Rinse Unit faucets have two L-shaped handles, including 44" Flex Hose w/ Overhead Spring

& Spray Valve Assembly Finger hook 3/8" NPT x 24" Riser 42 1/16" overall height Lever

12.19 handles with color coded indexes and spring check eternal cartridges 1.42 GPM Flow

Control, Inlet kit, 6” wall bracket, built in check valve, Gooseneck Faucet Spout Shape of

Length 14 1/16 in, water Flow Rate1.42 gpm, CEC Compliant, confirming to AB1953, CSA,

A 15 mm nominal dia each 1.00 34349.65 34349.65 MR 30

Providing and fixing CP Brass Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube

in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) including making all

connections, fixing to wall with suitable brackets all as per manufacturers specification and

direction of Engineer-in-charge.

A 15 mm nominal dia each 3.00 2135.05 6405.15 MR 31

12.21 BEHIND MIRROR PAPER DISPENSER KINOX BPD

Providing and fixing 18-8 S, type-304, stainless steel Behind Mirror Paper Dispenser Kinox BPD

345 mm long, 110 mm wide with 455mm high having 600 C-fold or 800 multifold paper

towels capacity with loading from bottom including fixing to wall as per manufacturers

specification and direction of Engineer-in-charge.

12.22 STAINLESS STEEL HAND DRYER

Providing and fixing Touch-Free Infrared Activated Wall Mounted 18-8 S, type-304, stainless

steel Hand Dryer having Sensor Range 12 cm – 15 cm, Hand Dry Time Less than 20 Seconds,

Auto Cutoff 30 Seconds, Motor Brush Type, Dual Ball Bearings, Motor Speed 25,000 RPM,

Voltage 220V / 50 Hz, Rated Power 550W, Current 2.5 A, Protection Class IPX1, Blowing

Volume > 270 m3/h, Air Speed 95 m/s including fixing to wall as per manufacturers

specification and direction of Engineer-in-charge.

12.23 GREASE SEPARATOR

Supply Installation, Testing & Commissioning of modular type grease separator Nugreen SS

304 NGT 20 with direct suction Pipe inlet and outlet 40/50 dia. flange,grease separator plant

according to Free Standing in Frost free areas and under sink installation of polyethylene

material with integrated sludge trap, domed cover made of Polymer with snap fit closures

and sealed odor -tight , with installed suction system in flow direction left or right for disposal

both from sludge trap and grease separating chamber and with flange connection for

intake pipe according. Integrated sludge trap of 10 ltrs and volumes at 9 ltrs. Dimensions to

be within 426 mm x 296 mm X 350 mm( L X W X H) .

Digitally signed by AMIT

12.24 URINAL PARTITION

Providing and fixing Curved shaped urinal partition with frosted glass 8mm thick 900mm

high and 450mm wide complete with brackets fixed to wooden cleats with CP brass screws each 2.00 8968.80 17937.60 MR 35

with concealed fittings arrangement of approved quality and colour.

12.25 WASH BASIN

Providing and fixing white vitreous china wash basin including making all connections but

excluding the cost of fittings :

A Under Counter Basin With Fixing Accessories, Size: 600x450x170 mm, Shape: Rectangular each 2.00 12221.00 24442.00 MR 36

Total Carried Over to Abstract for Sub Head: 12.00 Sanitary Installations : 195100.00 240356.20

SH WATER SUPPLY 13.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in Charge. Concealed work,

including cutting chases and making good the walls etc.

A (a) 20 mm nominal outer dia Pipes Metre 85.00 537.6 45696.00 18.8.2

B (b) 25 mm nominal outer dia Pipes Metre 72.00 627.25 45162.00 18.8.3

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and

making good the walls etc. Internal work - Exposed on wall

A (a) 32 mm dia. nominal bore Metre 30.00 667 20010.00 18.10.4

B (b) 40 mm dia. nominal bore Metre 30.00 811.9 24357.00 18.10.5

C (c) 50 mm dia nominal bore Metre 35.00 1048.35 36692.00 18.10.6

13.3 Providing and fixing brass stop cock of approved quality : 18.16

A (a) 20 mm nominal bore Each 5.00 379.3 1897.00 18.16.2

13.4 Providing and fixing uplasticised PVC connection pipe with brass unions 18.21

A (i) 45 cm length 18.21.2

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a

ready mixed priming coat, both of approved quality for new work

A (a) 32 mm diameter pipe Metre 15.00 36.35 545.00 18.38.4

Digitally signed by AMIT

Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and

making long screws etc. complete (New work) :

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and

13.7 filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 Each 10.00 209.2 2092.00 18.79

mm nominal size) including disposal of malba.

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock,

having foam flow technology.

A 15 mm nominal bore Each 1.00 8803.7 8804.00 18.84.1

Cutting core in R.C.C. Work by mechanical means on vertical / horizontal surface at all

13.9 height of required dia and depth including stacking and disposal of unserviceable material

complete within 50 metres lead as per direction of Engineer-incharge.

A (a) Core upto 150 mm dia Each 6.00 1350 8100.00

Total Carried Over to Abstract for Sub Head: 13.00 Water Supply : 227561.00 0.00

SH ALUMINIUM WORK 14.00

ALUMINIUM FRAMING

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides

14.1 with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust 21.1

free, straight, mitred and jointed mechanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all

complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,

paneling and dash fasteners to be paid for separately) :

A For fixed portion 21.1.1

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15)

14.2 DEMOUNTABLE DOUBLE GLAZED ACOUSTIC PARTITION

Digitally signed by AMIT

Providing and fixing, in position demountable double glazed acoustic aluminium framed

partition system of appropriate size and thickness (not less than 2 mm) having sound

reduction value >35 Db, supporting height upto 2700mm with snap on option for

installating glass, , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,

including anodising up to 15-20 microns of required colour and shade, accessories ie 'T'

. section, corner section & vertical "I" section between glass to glass ,glass packing to adjust

the floor level, ceiling profile, floor profile and wall profile as per the manufacturer

specification( The item includes cost of material such as cleats, sleeves, screws etc.

necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on

this account), all complete as per the architectural drawings and approved shop drawings

, & directions of engineer-in-charge.

100 mm overall thickness 25 mm visible face partition with 12 mm thick double skin clear

toughened glass with double sided adhesive tapes for glass to glass butt joints

Total Carried Over to Abstract for Sub Head: 14.00 Aluminium Work : 20297.00 448179.60

SH WATER PROOFING 15.00

INTEGRAL CEMENT BASED TREATMENT

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

15.1 applying cement slurry mixed with water proofing cement compound consisting of

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.

Total Carried Over to Abstract for Sub Head: 15.00 Water Proofing : 12257.00 0.00

SH NEW TECHNOLOGIES AND MATERIALS 16.00

Digitally signed by AMIT

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of

99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire

Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120

16.1 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm 26.27

of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm

to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel

item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm

diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size

85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.

The system should rest on periphery walls /partitions with the help of GI perimeter wall

angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help

of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The

exposed bottom portion of all T-sections used in false ceiling support system shall be pre-

painted with polyester baked paint, for all heights. The work shall be carried out as per

specifications, drawings and as per directions of the engineer-in-charge.

B With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) sqm 310.00 2671.2 828072.00 26.27.2

Providing & fixing acoustic panels any size and shape in approved color and code no. with

Standard size & 9mm thickness. acoustic Panels should have Sound Absorption coefficient

(NRC) 0.94. Formaldehyde emission standards of GB18580-2001 class E1, it is a green

material with asbestos-free, non-toxic and tasteless gas under extreme temperature,

protecting the ozone layer, non-irritant and recyclable. acoustic panels have to be Fire-

resistant . Good insulation properties, to prevent transmitting the heat from outdoor to

indoor directly as partition or and ceiling, saving 35% of energy, extending the life of air

conditioning. acoustic panels are Light weight and allow free cutting with paper knife.

16.6 METAL BAFFLE CEILING

Digitally signed by AMIT

Providing and fixing Baffle Ceiling System false ceiling at all heights of approved texture,

design and pattern. The baffle fixed with end cap at terminals and intermediate connector

piece at joints in true horizontal level suspended on interlocking Grid of hot dipped all

round galvanized iron section of 0.8mm thick (galvanized @120 gsm) comprising of main

Baffle carrier of 23X34mm 0.5mm thick of length 3000 mm, cross Secondary C Channel

(40mm x 0.8mm thick with two flanges of 15mm & 20mm) of length 3000 mm suspended

from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer

diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm

length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre

along main ‘Baffle carrier’.The work shall be carried out as per specifications, drawings and

as per directions of the engineer-in-charge.

Note: All support carriers to be powder coated with approved color

25mm wide 100 mm high 0.7mm thick powder coated aluminium at 150mm center to

Total Carried Over to Abstract for Sub Head: 16.00 New Technologies And Materials : 828072.00 1043271.25

Digitally signed by AMIT

SLIDING FOLDING WORK

SR.NO LOCATION DESCRIPTION UNIT QTY RATE AMOUNT

1 Sliding and folding Acoustic partition up to false ceiling level.

a Providing and fixing "Variflex" operable partition of consisting of series of individual flat

elements of 100 mm thick travelling along the ceiling track assembled to form a solid wall.

The sound insulation of the operable partition should be 50db. Elements must be constructed

of a torsion-free steel horizontal tube frame and torsion-stiff vertical aluminium profiles, bolted

together to make the element strong and sturdy. The frame must be clad either side with

16mm MDF panels hung in acoustic free suspension from the panel frame. The elements

must be inter-connected by means of a positive locking concave/convex aluminium profile

with an integrated magnetic strip and sealing lip having a linear attraction of 40N/m. Each

element must have a spindle mechanism which should be connected to the spring loaded

top and bottom retractable seal. The spindle mechanism should be operated manually by a

bayonet connected crank handle that acts as a lock in function during cranking process.

The horizontal top and bottom seals must be extended manually by crank handle and

should ensure a contact pressure of 800N when the seals are completely extended. The seal

spindle mechanism must be accessible while the panel is hanging for servicing and

adjustment if necessary. Total disassembly of the panel frame to access internal components Sqm. 11 38750 426250

is not acceptable. No fixed sweep seals allowed in top and bottom of the element that

would rub against the track or floor while moving the element. The telescopic element or

the end closure element must open and close 120mm horizontally. The movement of the

telescopic panel and the operation of the horizontal top and bottom seal and must be

operated by a single mechanism. Each element must be suspended from the track capable

of withstanding the load of the element. The elements shall run with the help of steel clad,

multi directional rollers on a 100mm thick aliminum extruded track capable of taking a

weight of 500 kgs/ element. Panel should be stacked in center stacking positionAfter

installation of tracks, a sound barrier should be erected between the RCC and the false

ceiling consisting of 2 gypsum boards of 12.5mm thick each with mineral wool filling in

between having a density of 48kgs/ cubic meter and fitted to a G.I. sheet framework. There

shalll be a door integrate with one panel inclusive all hardware & accessories.

Wall dimensions: WALL A- 7500mm (wide) X 2400mm (high)- 6 PANELS- CENTER STACKING- 1

run & 1 openable door.

b Same as above but without door panel.

SUB TOTAL 426,250.00

1 Digitally signed by AMIT Architect: ARGROUP

Name of Work : INTERIOR/ FURNISHING WORK OF NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI.

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

SH FURNITURE 17.00

1 Providing and Placing Table for DG Cabin, Table Size 2800*900*750(H), Back Storage Unit of size Each 1.00 10500 10,500.00

Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and

final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of

computer. The front modesty panel of the table shall be made up of MDF board which shall also be duly

finished with Veener and PU coating

One mobile pedestal (3 drawer unit) of size 510 mm Width x 635 mm Height and 445 mm Depth made up of

MDF duly finished with veener & final coating of PU.

The side unit made up of MDF board duly finshed with Veneer and final finish by PU Coating consiting of open

space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in

the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The

hardness of the PU coating shall be 1.5H.

The back unit made up of MDF board duly finished with veneer & final finish by PU coating. Below storage

provided with wooden shutters & the upper left & right side of the back unit with wooden shutters. The middle

3 door shutters of glass of minimum 5mm thick. The hardness of the PU coating shall be 1.5H.

2 Providing and Placing of L-Shaped Table for JS Cabins, Table Size 2100*800*750(H), Side Table : Each 4.00 38000 152,000.00

Primary Work Surface Made of 25mm thick MDF one side pre-laminate board OF EXTERIOR MAKE confirming

to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power

box are provided on work surface for wire management.

Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board OF EXTERIOR MAKE

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.

Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm

PVC membrane pressed on to top.

Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade

confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Digitally signed by AMIT

Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade

confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of

25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane

pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal

Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles

and locks to be provided.

3 Providing and Placing of Table for Cabins, Table Size 1600*800*750(H) Each 8.00 33500 268,000.00

Primary Work Surface Made of 25mm thick MDF one side pre-laminate board OF EXTERIOR MAKE confirming

to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power

box are provided on work surface for wire management.

Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board OF EXTERIOR MAKE

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.

Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm

PVC membrane pressed on to top.

Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade

confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade

confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of

25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane

pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal

Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles

and locks to be provided.

4 Manufacturing, providing and placing in position machine made factory assembled workstation (as per finally

approved sample by department) of following dimensions with the following specifications.

Digitally signed by AMIT

Frame Work, Partition and Cable management : Frame work shall consist of main spine and return spine of aluminium

extruded section of minimum thickness of 1.2 mm. The overall thinkness of Panel base System should be minimum60-

70 mm. The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel should be

made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create

the hollow for the wire management.Finishes of panel above the worktop: Above the top fabric pinup+ Glass writable

marker board with raceway on main spine. The hollow panel made of MDF and 3mm thick foam which is upholstered

with 0.5mm thick fabric with half fabric pinup + half glass marker board. The thickness of main spine partition panel

should be minimum60-70 mm & minimum 25-28mmmm thick for return & Aisle spine.Finishes of main spine panel

below the worktop: Below the top the hollow panel should be made of MDF tile and 0.5mm thick steel sheet pasted on

MDF which is powder coated with EPC finish 80-90 microns for durability on the inside as well on the outside.The panel

outer aluminium frame is designed such a way that it can be easily slide in to the columns/ Connectors by means of

stacking one over the other.Horizontal race way should be 150-170 mm height aluminium profile. There shall be

complete cable management arrangement with openable raceway above/ below worktop with provision for fitting

electrical/data switches and holes for passing cable. Connectors/ Post Description:

End Post: Aluminium 60-70 mm width – 1200-1250 mm height.

Two way post: Aluminium 30-80 mm width – 1200-1250 mm height.

Three way post: Aluminium 30-80 mm width – 1200-1250 mm height.

Four way post: Aluminium 30-80 mm width – 1200-1250 mm height.

Table top supported with 50-60mm width steel bracket.

Table top to table top connector: 150-170 mm Width x 120-140 mm Depth width connector.

5 Providing and Placing of V-Shape 13 Seater Conference Table of Size 4900*1050/1350*750(H). Each 2.00 80000 160,000.00

Worksurface : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade

conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Understructure : Knock-down construction type made of 18mm Thick Pre-laminated OF EXTERIOR MAKE twin

board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping. Aluminium alloy 63400 - WP profile connecting panels together, Plastic ABS access flap for

access to wires and cables.

Wire Management : Panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60

microns) . Provision to mount 6 module plate below worktop & Cutout on top with two piece injection

moulded plastic part polymer component onto worktop.

Digitally signed by AMIT

6 Providing and Placing of Revolving Mid Back Workstation, PA, JS cabin visitors & cabin visitors Chairs. Each 42.00 12750 535,500.00

SEAT/BACK ASSEMBLY: The cushioned seat Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH assembly consists of

seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch

knitted polyester fabric. The cushioned back Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) assembly consists of back

inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch

knitted polyester fabric. RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and

back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25%

TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back firmly connected to the base frame with

the back-spine structure having "S" shaped spines & the spine connector moulded in high strength glass-filled

Poly-amide. The variable tilt angle recline motion adjusted with 3 position Tilt Limit feature inbuilt in seat base

ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both

moulded in glass-filled Poly-amide: The button operated height adjustment feature having adjustment of

6.6±0.5cm. The Armrest Top made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-

PNEUMATIC HEIGHT ADJUSTMENT: The seating height adjusted with a pneumatic gas-lift having an adjustment

stroke of 9.2 ± 0.3 cm.

PEDESTAL ASSEMBLY: The pedestal injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin

wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors.

TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm

wheel diamter assembled to the pedestal.

7 Providing and Placing of Revolving High Back Pure Leather Chair for DG Cabin. Overall Dimensions of Chair Each 1.00 39500 39,500.00

Seat Height -40.0 to 55.0 cm. Height -110-135.0 cm. Width & Depth of Chair as measured from base - min.

Width-75.0 cm and min Depth-65 cm.

SEAT ASSEMBLY: the injection molded plastic cushioned seat upholstered with pure leather and moulded

high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25 compression

BACK ASSEMBLY: the cushioned seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d) &

back made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm,

upholstered with pure leather.

ARMRESTS: the armrest top moulded from polyurethane(pu), upholstered in pure leather and mounted on to

a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube

having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 stepsactive bio-synchro

Digitally signed by AMIT

FRONT PIVOT SYNCHRO MECHANISM: the 360° revolving type adjustable tilting mechanism with front-pivot for

tilt with feet resting on ground, 5-position tilt limiter of seat/back tilting ratio of 1: 2, the mechanism housing

made up of high density powder coated, 4 seat depth adjustment integrated in the seat through a sliding

mechanism. seat depth adjustment range of 6.0±0.5 cm

BACK HEIGHT ADJUSTABILITY: back frame connected to the up/dn mechanism housed in plastic t spine,

adjusted in the range of 7.42±0.5 cm

SLIDING SEAT MECHANISM : Seat slide horizontaly having Stroke of seat slide is 5 cm.

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.

PEDESTAL ASSEMBLY WITH CASTORS: The High Pressure Die cast polished Aluminium pedestal, fitted with 5 nos.

injection moulded in black PP twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm.

8 Providing and Placing of Mid Back Leatherette Chairs for Conference Rooms.

SEAT/BACK ASSEMBLY: The seat & back made up of 1.2 ± 0.1cm thk. hot pressed plywood upholstered with

synthetic leather over moulded High Resilience Polyurethane foam moulded with density =55+/-2 kg/m³ and

hardness 16 ± 2 kgf as per IS:7888 for 25% compression. . BACK SIZE: 51.6 cm. (W) x 65.7 cm. (H) SEAT SIZE: 49.0

ARMRESTS: The adjustable PU moulded over metal insert Fixed Armrest Top with chrome plated Height

adjustable armrest structure having Up-Down adjustment– 8 steps (8.0±0.5cm range).

FRONT PIVOT SYNCHRO MECHANISM: The 360° revolving type Tilt tension adjustable tilting mechanism having

single point control, Front-pivot for tilt with feet resting on ground, , 4-position locking with anti-shock feature,

Seat/back tilting ratio of 1:2.

BACK HEIGHT ADJUSTABILITY: Back adjustable in 5 positions manually. Stroke of height adjustable spine is min. 7

SLIDING SEAT MECHANISM : Seat slide horizontaly having Stroke of seat slide is 5 cm.

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.

PEDESTAL ASSEMBLY WITH CASTORS: The High Pressure Die cast polished Aluminium pedestal, fitted with 5 nos.

injection moulded in black PP twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm.

A Mid Back Leatherette Chairs for Conference Rooms. Each 30.00 15250 457,500.00

B High Back Leatherette Chairs for JS Cabins & cabins Each 12.00 17000 204,000.00

9 Providing and Placing of Non-Revolving

SEAT ASSEMBLY : The Injection molded Plastic outer & inner Cushioned seat min. SIZE : 45.0 cm. (W) x 45.0 cm.

(D) upholstered with similar material as specified below and moulded High Resilience (HR) Polyurethane foam

of Density 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

BACK ASSEMBLY: The Cushioned back min SIZE: 45.0 cm. (W) x 60.0 ± 5.0cm. (D) made of PU Foam with insitu

molded MS E.R.W Round Tube of min. size 1.9±0.03cm x 0.16 ±0.0128cm, upholstered with with similar material

as specified below.

Digitally signed by AMIT

TUBULAR FRAME: The cantilever type tubular frame made of min. Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202

tube connected to back through chrome plated high pressure die case connector piece.

A Mid Back Pure Leather Chair for DG Cabin Visitor Each 4.00 2850 11,400.00

10 Manufacturing, providing and Placing Wooden SOFA FOR all Cabin (as per finally approved sample by

department) of following dimensions with the following specifications.

Providing, making and installing in position ornamental design, customized wooden sofa of approved

design with seat & back upholstery work. The Sofa legs, arms, seat frame & back rest shall be made

with first class teak wood in approved section, shape & size. Upholstery on the seat and back with 12,

25 ,50 mm (required as per approved design) U foam of Sleepwell or other make as approved by

Engineer-in- charge. The cost shall Include Jute, elastic niwar, blue cut nails, tingles, cardboard,

thread roll adhesive etc. as per requirements. Covering the seat and back with approved fabric stitched

in required design as per approved sample. Finally finishing with high quality water based P.U polish in

desired colored & shade. All complete as per full satisfaction and direction of the Engineer In charge.

A 3 seater for reception area Nos. 3 33500 100,500.00

B 3 seater for DG cabin Nos. 1 52500 52,500.00

11 Manufacturing, providing and Placing CENTER TABLE FOR CABIN & WAITING AREA (as per finally approved sample by

department) of following dimensions with the following specifications.

Size of center table @2400x1200mm Nos. 1.00 25780.00 25780

Size of center table @1200x600mm Nos. 1.00 17783.00 17783

Size of side table @450x450mm Nos. 2.00 8500.00 17000

12 Reception Table 3000x750x1050mm

Providing and fixing of reception desk lower level at 750mm height formed out of 19mm ply framework, Nos. 1.00 105000.00 105000

exposed internal surface shall be finished in approved shade of laminate, as per details and Designs. The

table shall be cladded with Solid Surface. The internal surfaces and table top shall be finished with laminate

surface as per approval.

300mm wide upper counter top at 1050mm level - Table top shall be formed out of 19mm thick ply boxing

frame work bent to shape as per design and detail and finished with 12mm Solid Surface surface of

approved shade as per design and details.

The facia to be finished in Solid Surface as per approved sample in curved profile.

The table to have in built 1 no drawer pedestal finished with laminate of approved colour and shade as per

details.Drawer to be complete with hardware installed as directed to consist of the following: 1 no multi

purpose lock as specified, Telescopic channel, etc., complete as per details and Consultant's approval.

Provision for mounting of switch sockets & cove light to be made. Base Rate of Solid Surface 12000/- Sqm

Total Carried Over to Abstract for Sub Head: 17.00 Furniture : 2,952,963.00

Digitally signed by AMIT

Name of Work : INTERIOR/ FURNISHING WORK OF NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI.

Conference Room

Total Price with

S.No Product Description Unit Qty Price

Supply, Installation, testing and commissioning of PTZ Camera, 20X Optical Zoom, Digital

Zoom: Up to 20X Wide Viewing Angle up to 72.5 Degrees, RJ-45 Port, Quiet Motor with Servo

1 Algorithm for PTZ Control, Full HD 1080p signal output format with a high frame rate of 60 fps, Nos 2 285,600.00 571,200.00

HDMI, and USB 3.0 synchronous video outputs.

Supply, Installation, testing and commissioning of 98" smart 4K LED Display,Audio Built in

Speaker(10W + 10W),HDMI 2.0 X 2, USB 2.0 x 1 , Audio Input X 1, OUTPUT Type Stereo Mini

Jack, HDMI X 1, Duty Cycle 24 x 7, Speacial features, File support Direct vieweing of PPT,

2 Word ,PDF, Images and video from pen drive, EXTERNAL CONTROL RS232C(in) thru stereo jack, Nos 0 1,483,260.00 -

RJ45, OS Built in android / windows /IOS , Brightness TYP300, Accessories=wall stand/ Table

stand, Remote and standard cables

Supply, Installation, testing and commissioning of 85" smart 4K LED Display,Audio Built in

Speaker(10W + 10W),HDMI 2.0 X 2, USB 2.0 x 1 , Audio Input X 1, OUTPUT Type Stereo Mini

Jack, HDMI X 1, Duty Cycle 24 x 7, Speacial features, File support Direct vieweing of PPT,

Word ,PDF, Images and video from pen drive, EXTERNAL CONTROL RS232C(in) thru stereo jack, Nos 0 1,000,500.00 -

RJ45, OS Built in android / windows /IOS , Brightness TYP300, Accessories=wall stand/ Table

stand, Remote and standard cables

Supply, Installation, testing and commissioning of 55" Full HD LED display, HDMI X 2, VGA X 1,

Video IN X 1, USB X 1, Audio IN X1, Audio Out X 1, SPDIF X 1, RS232C x 1, 20W in built speaker,

IPS LED display, USB media playe

Supply, Installation, testing and commissioning of Ceiling Microphone tile with 27 or more no.

of omni directional microphone, Dante connectivity : dual / redundant, POE enable (qty of

microphone will vary as per the mentioned coverage area and built in micorphone), Lighting

4 Indication on all four corner, It should work on open control protocol software and Nos 4 559,120.00 2,236,480.00

compitable to monitor with a single sofware for all the microphone in the campus etc

complete required as per the specifications

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of Digital Signal Processor with 8 Mic/Line inputs,

8 Line outputs and 8 software assignable channels, configurable as Mic/Line Inputs or Line

outputs. The processor shall have minimum 16 assignable & routable AEC channels. The

processor shall have minimum 8x8 Dante channels and shall also support up to 128x128

Network audio channels via Dante or AES67. It shall also support POTS and SIP Softphone

integration for Audio conferencing and configurable 16x16 USB Audio channels via USB-B

ports supporting AV USB Bridging for software or web-based conferencing applications. The

processor shall also have minimum 24 bit-A/D-D/A converters, 48 kHz Sample rate, Input

frequency response of 20 Hz to 20 kHz @ +21dBu, Input dynamic range > 109.5 dB at @ +24

dBu sensitivity. The processor shall support third party device control via Ethernet, RS232 .

Supply, Installation, testing and commissioning of 6.5" two-way coaxial thin edge ceiling

loudspeaker, 100V transformer power taps : 24,12,6, watts, Conical dispersion : 145° or more,

6 impedance : 8, low impedance RMS continous power : 30watts, frequency range : 50 Hz - 20 Nos 16 17,110.00 273,760.00

kHz or better, frequency response : 60Hz - 20KHz or better etc complete required as per

specifications.

Supply, Installation, testing and commissioning of quad channel Amplifier, 4 X 80watt or

more, THD+N (@ 1 kHz) : < 0.3%, Technology : Class-D, Common mode rejection ratio : 70dB or

7 better, Temperature controlled FAN, Switching mode power supply, should have Protection Nos 2 235,500.00 471,000.00

features like : DC Short circuit & Over heating & Over load & Signal limiting etc, Built-in high

pass filter and gain adjustment option etc complete required as per specifications.

8 Supply, Installation, testing and commissioning of wireless presentation device Nos 2 265,500.00 531,000.00

Supply, Installation, Testing & Commissioning of 8 by 8 Matrix has the ability to connect up to

9 eight 4K UHD HDMI sources to up to eight 4K UHD HDMI displays and freely switch between Nos 1 383,500.00 383,500.00

them. The unit.

Supply, Installation, Testing & Commissioning of 1X HDMI Type A female (Black), 100 Ω,

10.2Gbps (3.4 Gbps per lane), 340 MHz, HDMI (3D, Deep Color, 4K) HDCP2.2 Compatible

Consumer Electronics Control (CEC), Up to 4K @35m (Cat 5e/6) / 40m (Cat 6a/ATEN 2L-2910

Cat6); 1080p@60m (Cat 5e/6) / 70m (Cat 6a/ATEN 2L-2910 Cat6)*4K Supported: Transmitter

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of 1XHDMI Type A male (Black), 100Ω, 10.2 Gbps

(3.4Gbps per lane), 340 MHz, HDMI (3D, Deep Color, 4K) HDCP2.2 Compatible Consumer

Electronics Control (CEC), Up to 4K @ 35m (Cat 5e/6) /40m (Cat6a/ATEN 2L-2910 Cat6);

1080p@60m (Cat 5e/6) /70m (Cat 6a/ATEN 2L-2910 Cat6) *4K Supported: Reciever

Supply, Installation, Testing & Commissioning of Cable cubby enclosure with tilt up lid

Multiregion power socket, , Pass through holes for HDMI, Audio, VGA & LAN connectivity

11 etc. as required Complete as per specification & as required.able enclosure with tilt up lid Nos 4 21,830.00 87,320.00

Multiregion power socket, , Pass through holes for HDMI, Audio, VGA & LAN connectivity

etc. as required Complete as per specification & as required.

Supply, Installation, testing and commissioning of touch panel to control switching with Wifi

13 Supplying and laying HDMI Cable with connector on both ends. Mtr 25 1,250.00 31,250.00

Supply, Installation, Testing & Commissioning of 24 x 10/100/1000BASE-T PoE ports Advanced

L2 switching and security features L2+ Static Routing Optional management user interface

Full/Half-duplex for 10/100 Mbps Full-duplex for 1000 Mbps 34.85 W/100 V 34.2 W/240 V IEEE

14 802.3 10BASE-T Ethernet (twisted-pair copper) IEEE 802.3u 100BASE-TX Fast Ethernet (twisted- Nos 1 218,536.00 218,536.00

pair copper) IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic IEEE 802.3ab 1000BASE-T

Gigabit Ethernet (twisted- pair copper) IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic IEEE

802.3az Energy Efficient Ethernet (EEE) IEEE 802.3x Flow Control (24-P Switch)

4K Projector with VC Supporting having a Display System 4K SXRD panel, projection System

lamp replacement time*2, 6,000 H (Lamp mode: Low) Power Consumption 390 W 3D

capability - Yes Display size: 16:9 The figures are expected maintenance time and not

guaranteed. They will depend on the environment or how the projector is used. HDMI Input2

is compatible with HDCP 2.2. Depends on the projector setting condition and usage

environment. Supplied Accessories

Batteries (2), AC Power Cord (1), Lens Cap (1), Quick Reference Manual (1),Safety

Regulations (1), Projector Screen and Picture processor X1 for projector and including any

accessories like cables, connectors etc which is required to complete the opration of

Projector & VC together. Installation/ fixing arrangement of Projector and PTZ Camera as

instructed by client/Engineer In Charge in such a way to full fill the requirement of VC facility

Supply, installation, testing and commissioning of of Various Connectors For Above

Mentioned Configuration etc. all complete.

Digitally signed by AMIT

Name of Work : INTERIOR/ FURNISHING WORK OF NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI.

S.No Item Description Item Unit Qty Rate Amount

Supply, Installation, Testing & Commissioning of 48 x

10/100/1000BASE-T PoE ports 4 x Gigabit GbE/SFP combo

ports Advanced L2 switching and security features L2+

Optional management user interface Full/Half-duplex for

10/100 Mbps Full-duplex for 1000 Mbps 34.85 W/100 V 34.2

W/240 V IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)

IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)

IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic IEEE

802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair

copper) IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic

IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3x Flow

Supply, Installation, Testing & Commissioning of 24 x

10/100/1000BASE-T PoE ports Advanced L2 switching and

security features L2+ Static Routing Optional

management user interface Full/Half-duplex for 10/100

Mbps Full-duplex for 1000 Mbps 34.85 W/100 V 34.2 W/240

V IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) IEEE

802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) IEEE

802.3u 100BASE-FX 100 Mbps over fiber optic IEEE 802.3ab

1000BASE-T Gigabit Ethernet (twisted- pair copper) IEEE

802.3z 1000BASE-X 1 Gbps over fiber optic IEEE 802.3az

Energy Efficient Ethernet (EEE) IEEE 802.3x Flow Control (24-

Digitally signed by AMIT

S.No Item Description Item Unit Qty Rate Amount

Supplying and drawing of CAT 6A U/UTP cable, white

jacket, 4 pair LAN Cable in the existing surface/ recessed

3 Steel/ PVC conduit as required. Cat-6 Cable Rmt 4,500 57.00 256,500.00

Supply, Installation, Testing & Commissioning of CAT 6A

Patch Cord LSZH 1 Mtr, 4 pair 26 AWG stranded copper

wire, Pre-terminated with RJ45 plugs, Slim clear anti-snag

slip on boots, Suitable for EIA 568A or 568B wiring, UL®

4 Listed, meets all TIA and ISO requirements. Complete in all Patch Cord 1mtr Nos 146 297.49 43,432.95

respect as required by site completion.

Supply, Installation, Testing & Commissioning of CAT 6A

Patch Cord LSZH 2 Mtr, 4 pair 26 AWG stranded copper

wire, Pre-terminated with RJ45 plugs, Slim clear anti-snag

slip on boots, Suitable for EIA 568A or 568B wiring, UL®

5 Listed, meets all TIA and ISO requirements. Complete in all Patch Cord 2mtr Nos 145 339.32 49,201.39

respect as required by site completion.

Supply, Installation, Testing and Commissioning of 42 U

Networking Rack (600*800), Front Glass Door Unit and

Grilled back door unit, lockable Door unit, Load Rating of

Min 450 Kg. Pillar of frame must be aluminum and Rest

plated are steel, Powder Coated Rack with Castors

6 (4nos.), Fan (4 Nos.), Cable Manager (2Nos), Full Tray Unit Rack 42U Nos 1 59,500.30 59,500.30

(1 Nos.), PDU (1Nos.) complete in all respect as required.

Digitally signed by AMIT

S.No Item Description Item Unit Qty Rate Amount

Supply, Installation, Testing & Commissioning of CAT 6A

Infornmation Outlet,Universal label permits T568A or B

wiring, UL® Listed, meets all TIA and ISO

7 requirements.Complete in all respect as required by the IO Nos 150 425.00 63,750.00

Supplying, installing, testing and commissioning of 1U PVC

Cable Manager is Ideal for Networking and Server Rack

for the better and effective management of cables

8 Cable Manager Nos 6 297.49 1,784.92

Supply & Fixing of Dual Faceplate, Duplex Port (for data

and for voice) or as required square plate having spring

shuttered front access for preventing ingress of dust,

9 dimension as per commercially available modular office Face Plate Nos 100 150.00 15,000.00

Supplying, installing, testing and commissioning of 24 port

Cat 6A patch panels available with block of four

equipped with tool less IO, Rack Mountable. 19" Modular

Patch Panel, loaded CAT6A U/UTP 24 port LCS2 rack

10 mountable to be compatible in 4nos of 6 X RJ 45 Tool less Patch Panels Nos 6 16,951.57 101,709.42

connector U/UTP unit in a block.

Digitally signed by AMIT

S.No Product Description Unit Total Qty Rate Amount

Supply, Installation, Testing & Commissioning of Server based Communication System with all the required -

IP-PBX/IP Telephony Communications Server: The IP Telephony Solution should support H.323 and SIP

The Solution should support the following Trunks - FXO, E1 PRI and SIP Solution should support 100

Extensions from Day 1.

IP office r10+ avaya ip endpoint 1 lic:cu, ip office r11 essential edition lic:ds, power cord india, ip office isdn

1 cable rj45/rj45 3m red, ip office ip500 extension card phone 8, ip officeb/5800 ip500 expansion module

phone 30, ip office ip500 rack mounting kit, ip office ip500 v2 system sd card a-law, ip office ip500 trunk

analog 4u v2, ip office ip500 v2 combo card atm v2, j139 ip phone taa, ip office ip500 version 2a control unit

taa, ip office voice coding module 32 v2 media card taa

Supply, Installation, Testing & Commissioning of 2.0” (diagonal) color display—320 x 240 pixels, Multiple

line phone with four red / green line / feature indicators around display, 4 Context sensitive soft keys, Hard

buttons for phone, messages, contacts, history, home, navigation cluster, headset, speaker, volume, mute,

LEDs for speaker, mute, headset, essage, history, Wideband audio in handset and wired headset, Full

duplex speakerphone & handset, Ergonomic hearing aid compatible handset supports TTD acoustic

coupler, Message waiting indicator, Mute key with optional mute alerting, IC call alerting with 360-degree

visibility, Dual-position stand, optional wall-mount stand, Gigabit Ethernet (10 / 100 / 1000) line interface,

2 Second Ethernet interface 10 / 100 / 1000 Mbps, PoE Class (IEEE 802.3af) registers as class 1 device and NOS 0 22,500 0.00

supports 802.3az, Optional AC to 5 volt power supply • SIP protocol support, Standards-based codec

support: G.722, Opus, Configurable via Web interface, Support for HTTPS, TLS and SRTP for encryption,

Recent Call Log (100 entries), Zero touch deployment via Device Enrollment Services Support, Supports

the following languages: Dutch, English (UK & US), French, (Canada), French (France), German, Italian,

Japanese, Portuguese (Brazil), Simplified Chinese, Spanish (Latin America), Spanish (Spain)

3 Supply, Installation,Testing and commisioning of Analog Phone NOS 50 2,150 107,500.00

4 Supply, Installation,Testing and commisioning of IP phone license complete as required NOS 6 7,332 43,990.74

Digitally signed by AMIT

SCHEDULE OF WORK

Name of Work : INTERIOR/ FURNISHING WORK OF NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI.

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

(SH-I: EI Works)

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed steel conduit, with

modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS DSR-22

PVC insulated copper conductor single core cable etc. as required.

2 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable

GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc. as required.

3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm

FRLS PVC insulated copper conductor single core cable etc. as required.

4 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper 600 Meter 433.00 259800.00 1.5 259800.00

conductor single core cable for loop earthing as required.

5 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core

cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated 350 Meter 662.00 231700.00 1.6 231700.00

copper conductor single core cable for loop earthing as required.

6 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

7 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

8 Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as reqd.

8.1 3 pin 5/6 A socket outlet (for VRF Indoor Unit) 4 Nos. 122.00 488.00 1.24.4 488.00

9 Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

10 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps 55 Nos. 477.00 26235.00 1.31 26235.00

modular switch, connection etc. as required.

11 Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in

recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A 20 Each 586.00 11720.00 1.32 11720.00

modular switch, connections etc. as required.

12 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A 35 Each 676.00 23660.00 1.56 23660.00

modular switch, connections etc. as required. (For light plugs to be used in non residential

buildings as a computer point).

13 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution

board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

14 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A

tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but

without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

15 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

16 Supplying and fixing 63 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker

suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

17 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in the existing MCB DB complete with DSR-22

connections, testing and commissioning etc. as required.

18 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

19 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

20 Fabrication, supply, Insallation testing & commissioning of Electrical panel of cubical

construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, interconnection with suitable size

copper conductor cable/solid copper strip, having switchgears and accessories, mountings

and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for

elecrical distribution complete as per specification with following in coming and Outgoings,

suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42

1 no. 250A 415V, 4P 25kA MCCB with Microprocessor based release having O/L, S/C/ , E/F ,

O/V, U/V Protection and ON /OFF/TRIP Indications with MCB.

1 no. Digital type Multifunction Meters to show (V, A, kWh, KVAh, KW, KVA, KVAR, PF, Hz.) with

cast resin CTs.

1 Set of LED phase indicating lamps with MCB protection.

1 Set of TPN aluminium bus bar of minimum of 300 A capacity with heat shrinkable coloured

sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc, for withstanding fault level of 50 KA for 1 Sec.

2 no. 100A 415V, TP+Neutral Link MCB of 25kA with O/L, S/C protection.

3 no. 63A 415V, TP+Neutral Link MCB of 25kA with O/L, S/C protection.

3 no. 40A 415V, TP+Neutral Link MCB of 25kA with O/L, S/C protection.

3 no. 16A 415V, TP+Neutral Link MCB of 25kA with O/L, S/C protection.

2 no. 40A/63A 4P MCB as Spare feeder

1 no. MCCB vacant Space.

21 Fabricating supplying and fixing on surface / recess / ceiling suspended of 2.0 mm thick

factory fabricated GI Sheet Raceways height 38 mm and totally enclosed with 2mm thick

cover. Including Chipping, removing and disposaling of screed / debari . to install the

raceways in floor. as per PMC instructions etc. complete as reqd.

22 Fabricating supplying and fixing on surface / recess / ceiling suspended of 2.0 mm thick

factory fabricated GI Sheet Junction box height 50 mm. Providing rubber gaskets between

the cover and the Junction Box, cutout for raceway with removable cover plate on all four

side for blocking the entry with screws etc. as required complete. Including Chipping,

removing and disposaling of screed / debari . to install the Junction box in floor. as per PMC

instructions etc. complete as reqd.

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

23 Supply, installation, testing and commissioning of the following sizes of PVC trunking system

with end caps, bends, elbows complete as required.

24.1 Providing and fixing of Gel-Chemical Earthing Electrode of G.I. made as pipe in pipe

technology (IS:3043 1987) following specification: Length - (3000 mm) DIA (50 mm) erminal

Strip Hole - (25 mm) Space Inside Electrodes - (Filled with Conductive Mixture) Hot Dip 7 Nos. 7485.00 52395.00 MR 52395.00

Galvanizing - (70 - 100 Microns) and pit covered with PVC / CI Cover with locking

arrangements etc. complete as reqd.

24.2 Extra for charging the existing earthings with chemical compound to reduce and retain the

resistance as desire in IS 3043, Complete as reeqd.

25 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode

including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as 10 Mtrs. 750.69 7506.90 5.11 7506.90

26 Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as

27 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

28 Supplying & Laying of following sizes copper conductor PVC imsulated PVC sheathed

unarmoured cables confirming to IS: 694(Part-I) 1988 of 1.1 KV in existing open masonary

duct/surface/raceways/pipe etc complete as reqd.

29 Supplying, Installation, Testing & Commissioning of recessed type indoor linear LED luminare

having the following specifications etc. complete as reqd: -

a) Total Lumens : Not less than 2000 Lumens

b) System lumens efficacy : Not less than 115 lumen per watt

c) Driver efficiency : Not less than 85%

d) THD : Not more than 10%

e) CRI : Not less than 80

f) LED Life : Not less than 50000 hours @ LM 70%

g) Colour tempreature : 4000-5500 K

h) Operating voltage range : 140 Volt to 270 Volt 28 Nos. 4512.00 126336.00 MR 126336.00

i) Installation type : Recessaed suitable for armstrong/grid Ceiling

j) Material of construction for housing : CRCA Powder coated.

k) Material of construction for cover : Opal Diffuser

l) Electronic Driver : Integral type (Constant current supply)

m) Internal surge protection : Not less than 2.5 kV

n) Ingress protection (IP) : Not less than IP 20.

o) UGR - Not more than 25.

p) Size of Luminare - 1200 x 65 x 65 (Plus Minus 5%)

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

34 Supplying, Installation, Testing & Commissioning of recessed type LED Linear lights 2'x2' having

the following specifications etc. complete as reqd: -

a) Total Lumens : Not less than 1800 Lumens

b) System lumens efficacy : Not less than 100 lumen P/Watt

c) Driver efficiency : Not less than 85%

d) THD : Not more than 10%

e) CRI : Not less than 80

f) LED Life : Not less than 50000 hours @ LM 70%

g) Colour tempreature : 4000-5500 K 24 Nos. 3412.00 81888.00 MR 81888.00

h) Operating voltage range : 140 Volt to 270 Volt

i) Installation type : Recessed suitable for armstrong/grid.

j) Electronic Driver : Non-Integral type (Constant current supply)

k) Internal surge protection : Not less than 2.5 kV

l) Ingress protection (IP) : Not less than IP 20.

m) Material for Housing- CRCA with polyster white powder coat.

o) material for cover/diffuser- Opal diffuser for flare free light

37 m) Size of Luminare

Supplying, - 595

Installation, mm x&595mm

Testing x 70mm (Plus

Commissioning Minus 5%)

of recessed type LED downlighter having the

following specifications etc. complete as reqd: -

a) Total Lumens : Not less than 950 Lumens

b) System lumens efficacy : Not less than 95 lumen P/Watt

c) Driver efficiency : Not less than 85%

d) THD : Not more than 10%

e) CRI : Not less than 80

f) LED Life : Not less than 50000 hours @ LM 70%

g) Colour tempreature : 4000-5500 K

h) Operating voltage range : 140 Volt to 270 Volt

i) Installation type : recessed type

j) Material of construction for housing : Alumunium polyster powder balck coloured coat

applied over a 5 stage pre-treatment.

k) Material of construction for cover/Optics : Prismatic diffuser

m) Electronic Driver : Integral type (Constant current supply)

n) Internal surge protection : Not less than 2.5 kV

o) Ingress protection (IP) : Not less than IP 20.

q) Size of Luminare - Dia 140mm x DA dia. 125mm x Height 55mm (Plus Minus 5%

41 Supply, installation, testing and commissioning of LED flexistrip having minimum 120 LED per

metre, 2835 SMD package with a thermal tape of high thermal convection factor having

minimum system power rating of 12W per metre, Luminuous efficacy not less than 90 Lumens

per metre, luminuour flus not less than 1080, CCT 4000-5500K, complete with 12VDC driver and 30 Mtrs. 698.00 20940.00 MR 20940.00

protection class-II, size etc. complete etc. complete as reqd.

46 Supply & Laying of following sizes Aluminum conductor armoured PVC insulated PVC

sheathed XLPE cable of grade 1.1 KV in the existing open masonary duct/surface/pipe etc

complete as reqd.

47 Supplying and making end termination with brass compression gland and aluminium lugs for

following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 DSR-2022

KV grade as required.

48 Supply & Laying of following sizes Copper conductor armoured PVC insulated PVC sheathed

XLPE cable of grade 1.1 KV in the existing open masonary duct/surface/pipe etc complete as

49 Supplying and making end termination with brass compression gland and Copper lugs for

following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV DSR-2022

grade as required.

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

Hot Dipped Galvanized Iron Cable Tray

50 Supplying and installing following size of perforated Hot dipped galvanized iron cable tray

(Galvanized thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders DSR-2022

including bolts & nuts, painting suspenders etc as required.

50.1 300 mm width X 50 mm depth X 1.6 mm thickness 50 Metre 963.00 48150.00 4.6.4 48150.00

50.2 150 mm width X 50 mm depth X 1.6 mm thickness 30 Metre 716.00 21480.00 4.6.2 21480.00

50.3 100mm width X 50mm depth X 1.6 mm thickness 25 Metre 669.00 16725.00 4.6.1 16725.00

51 Providing of rubber mat 1m wide and 12mm thick to withstand 3.3Kv dielectric strength as per

52 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at

least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red 1 Nos. 269.00 269.00 DSR-2022 269.00

colour on front side as required.

53 Providing First Ad Box as approved by St. John ambulance brigade/ Indian Red cross

confirming to IS 2217:1963.

54 Supply & fixing Shock Treatment Chart duly mounted on a wooden frame with 5mm thick glass

as required.( Approximate frontal area 1.20 Sqm)

(SH-II: HVAC System)

CHILLED WATER HVAC SYSTEM

72 VRV Outdoor Unit: Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling

and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two

compressors for above 14 HP modules, microprocessor based Controller, top discharge type

condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. DSR-19 (Item 1

complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work 50 HP 16415.00 820750.00 820750.00

even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V

+/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the

refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1

and IEER not less than 6.5 .

73 Indoor Cassette Type Unit: Supply, installation, testing and commissioning of following

minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped

with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced

blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer

cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., DSR-19 (Item 2

suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. VRV)

The unit shall have automatic force shut down provision in case of fire on receiving signal from

BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C

DB and 19 Degree C WB temperature.

74 Supply Installation, Testing and commissioning of Imported fittings (Ref Net) Y-joints etc

complete as reqd.

75 Copper Refrigerant Piping: Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type DSR-19 (Item 5

hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular VRV)

insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

75.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

75.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

75.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

75.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

75.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

75.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

75.7 28.58 mm dia (OD) (Harddrawn) with tube thickness 1.2mm with 19mm thick insulation

76 Drain Pipe: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded fittings This

includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling &

testing of joints complete as per direction of Engineer in Charge.

76.4 50 mm nominal outer dia Pipes 15 Mtr 811.00 12165.00 18.9.6 12165.00

79 Supply, Installation, Testing and Commissioning of inline exhaust fan of 500CFM capacity in

toilet area etc. complete as reqd.

80 Supply, Installation, Testing and Commissioning of 2 core x 1.0 sq.mm copper conductor

shielded data cable for control between indoor and outdoor unit & for communication

between Indoor Unit & Remote Controllers in suitable medium duty PVC Conduict etc.

complete as reqd.

(SH-III: Fire Alarm, PA and fire fighting sprinkler System)

82 Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules

and capable of supporting not less than 240 devices (including detectors) and minimum 120

detectors per loop and loop length up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other keypad and minimum 4000

events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz),

48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The DSR-2022

panel shall have facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of the schedule of work

under SH: PA System) and shall be complete with all accessories . The panel shall be

compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per

specifications.

83 Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch

screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. 1 Nos. 108688.00 108688.00 17.2.3 108688.00

84 Supplying, installation, testing & commissioning of intelligent analog addressable

photothermal detector complete with mounting base complete as required.

85 Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed temperature thermistor complete with base as required. 3 Nos. 2726.00 8178.00 17.2.9 8178.00

86 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required. 15 Nos. 276.00 4140.00 17.2.5 4140.00

87 Supplying, installation, testing & commissioning of addressable manual call point complete as

88 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

89 Supplying, installation, testing & commissioning of addressable fire control module complete

90 Supplying, installation, testing & commissioning of fault isolator complete with base as required.

91 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with

annealed copper conductor having glass mica fire barrier tape covered by an extruded

layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding,

steel wire armouring & LSZH outer sheath complete as required.

92 Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

93 Supplying, installation, testing & commissioning of intelligent addressable duct detector

including suitable Photo detector complete with base as required.

94 Supplying, installation, testing & commissioning of addressable phone control module

complete as required.

95 Supplying, installation, testing & commissioning of fire fighter telephone handset complete as

Public Address System

96 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3

player (including 6 zone button paging station) with seamless integration facility with main fire DSR-2022

alarm panel for voice evacuation complete as required. 17.3.1

97 Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling

speaker complete as required.

98 Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

operating at 240 volt AC supply complete as required.

99 Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

microphone assembly complete as required.

100 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

existing surface / recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

100.1 speaker cable Single pair, 2-core, 1.5 sqmm 60 Mtrs. 54.00 3240.00 17.5.3.1 3240.00

100.2 speaker cable Two pair, 2-core, 1.5 sqmm 68 Mtrs. 89.00 6052.00 17.5.3.2 6052.00

101 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

and accessories like coupler etc. as required.

Fire fighting sprinkler system

Modification of existing sprinkler system with testing, commissioning all inclusive and as per

102 Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS

1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and

fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or

Sprinkler DSR-22

more coats of synthetic enamel paint of required shade complete as required :

103 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming

Sprinkler DSR-22

to IS 13095 of following sizes as required

104 Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all

accessories as per manufacturer's specifications.

104.1 CO2 gas nozzle type - 9 Litre capacity (IS:15683). 2 Nos. 11219.00 22438.00 MR 22438.00

104.2 Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). 2 Nos. 5296.00 10592.00 MR 10592.00

104.3 ABC dry powder stored pressure type 6 kg capacity (IS:15683). 2 Nos. 6560.00 13120.00 MR 13120.00

105 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating

68 degree centigrade with required accessories

Sprinkler DSR-22

105.3 Horizontal side wall sprinkler 0 Nos. 617.00 0.00 21.3 0.00

106 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless

steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test

pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head Wetriser &

(Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, Sprinkler DSR-22

stockbar of following sizes complete as required

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

107 Supplying & fixing 1.2mm aluminium single side photo luminescent non toxic, non radio active,

maintanance free, self glowing exit sings comprising zinc sulphide chargeable crystals which

glows in dark printed on U-1000 photoluminiscent containing luminescent III as base chemical 225 Sq.inch 19.00 4275.00 M/R 4275.00

cover with u/v stabilized coating and mounting arrangement for wall / ceiling as per site

conditions the colour combination and size of the letters shall be as per IS: 12349 amended up

(SH-IV: CCTV SYSTEM)

110 PTZ Camera: Supply, Installation, testing & Commissioning of indoor inbuilt IR ,IP based

Autovarifocal PTZ camera (UL/FCC/CE/BIS approved) on wall/pole with mounting accessories

and made up of Aluminium having following specifications i/c connection with BIS

certification clearly mentioning the R number of the product etc as required and as per terms

and condition of the agreement.

(1/1.8 - 1/2.8)inch CMOS type image sensor.

Minimum 4 Megapixel

Resolution :- 2560 X 1920 or equivalent to 4 MP

Protection- Minimum IP 66

lux level-0.05 lux (colour) & 0.0 lux (mono) with IR or better

Video compression- H.265 ,H.264,M-JPEG

Tamper & Motion detector

Backlight compensation- On/Off/Intelligent Auto Exposure/WDR/HLC

Support up to minimum 512 GB micro SD card

IR distance- Minimum 250 mtr.

Working temperature -(-30 degree to 50 degree ) or better

Pan: 360 degree and Tilt : 0 to 90 degree minimum

Streaming-Multiple configurable streams in H.264 or H.265 and M-JPEG configurable frame

rate and bandwidth

Ethernet- 10 Base T/ 100 Base TX/RJ 45 connector

Optical Zoom- 30 X, Digital Zoom- 12 X or better

111 Bullet Camera: Supply, Installation, testing & Commissioning of indoor inbuilt IR ,IP based Bullet

camera (UL/FCC/CE/BIS approved) on wall/pole with mounting accessories and made up of

Aluminium having following specifications with BIS certification clearly mentioning the R

number of the product etc as required and as per terms and condition of the agreement.

(1/2.7 - 1/2.9) inch CMOS type image sensor.

Minimum 5 Megapixel

Resolution 3072 X 1728 or 2560 X 1920 or better

Protection- Minimum IP 66 & K10

Lens- 3.2mm - 9 mm or better , DC Iris or MFZ

lux level-0.24 lux (colour)& 0.0 lux (mono) with IR or better

WDR - 120 db or better

Video compression- H.265 ,H.264,M-JPEG

Tamper & Motion detector

Backlight compensation- On/Off/Intelligent Auto Exposure/WDR/HLC

Support up to minimum 512 GB micro SD card

IR distance- 30 mtr or better

Working temperature -(-30 degree to 60 degree ) or better

Streaming-Multiple configurable streams in H.264 or H.265 and M-JPEG configurable frame

rate and bandwidth

Ethernet- 10 Base T/ 100 Base TX/RJ 45 connector

112 Dome Camera: Supply, Installation, testing & Commissioning of indoor inbuilt IR ,IP based

Dome camera (UL/FCC/CE/BIS approved) on wall/pole with mounting accessories and made

up of Aluminium having following specifications with BIS certification clearly mentioning the R

number of the product etc as required and as per terms and condition of the agreement.

(1/2.7 - 1/2.9)inch CMOS type image sensor.

Minimum 5 Megapixel

Resolution 3072 X 1728 or 2560 X 1920 or better

Protection- Minimum IP 66 & K10

Lens- 3.2 mm - 9 mm or better , DC Iris or MFZ

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

lux level 0.24 lux(colour), 0.04 lux(mono) & 0.0 lux with IR or better

WDR - 120 db or better

Video compression- H.265 ,H.264,MJPEG

Tamper & Motion detector

Backlight compensation- On/Off/Intelligent Auto Exposure/WDR/HLC

Support up to minimum 512 GB micro SD card

IR distance- 30 mtr or better

Working temperature - (-20 degree to 50 degree ) or better

Streaming-Multiple configurable streams in H.264 or H.265 and M-JPEG configurable frame

rate and bandwidth

Ethernet- 10 Base T/ 100 Base TX/RJ 45 connector

113 NVR: Supply installation testing and commissioning of 32 channel Network Video Recorder

with Digital Video Management Software for seamless integration with third party application

for unlimited Management server/Recording server/Client PC for centralize monitoring,

recording and video management with 32 Camera Licenses and with 5 client licenses etc

.complete as reqd.

Minimum storage capacity- 32 TB or better

iSCSI connectivity- 2 x Gigabit LAN Ethernet ports for highest speed

Windows operating system and servor configuration

Minimum Bandwidth- Min 310 mbps.

Processor- i3-8100 processor, 3.6 GHz and minimum 3MB chache, Minimum Ram 4 GB. 1 Nos. 55000.00 55000.00 MR 55000.00

Minimum SATA HDD Trays- 4 Nos.

Ports- 2 x USB 2.0 (front), 2 x USB 3.1 (rear), 2 x USBC (rear); 2 x RJ45 Gigabit Ethernet LAN; 1 x

DVI; 1 x Display Port; 1 x HDMI

Operating Temperature- Zero degree to +40 degree calcious.

CE/BIS Certified

Basic features- Local recording and snapshots, PTZ control and digital zoom, Playback and

export from storage, Motion and forensic search, Multiscreen grid selection

114 LED TV: Supply installation testing and commissioning of 55 inch 4K LED professional monitor

(TV) for 24x7 Display with all HDMI input, USB, VGA, audio input/output control, RJ-45 Ethernet

Port, inbuilt speaker etc and necessary accessories complete etc. as reqd. The number of 1 Nos. 55000.00 55000.00 MR 55000.00

ports of HDMI,VGA ,USB etc should be as per requirement for the smooth functioning of whole

115 Supply , Installation , Testing and commissioning of Surveillance Grade 8TB SATA Hard Disk,

including fixing accessories and cable termination with required, complete in all respect as

per instruction of engineer in-charge. Recording shall be calculated at 2MP, 25fps for 30 days.

116 Supply, Installation, Testing and Commissioning of 15 Mtr. HDMI Cable. 1 Nos. 2000.00 2000.00 MR 2000.00

117 Supply installation testing and commissioning of Video Management Client Access Desktop

with i7 11th generation or more Processor,16GB DDR4 RAM or more ,1 TB SATA + 256 SSD Hard

disk or more, 4 GB Graphic card or more , DVD, DVD+/-RW, 21 inch or more LCD Display 1 No. 55000.00 55000.00 M/R 55000.00

along with Keyboard, Mouse, OS Windows 11 Professional 64bit or above etc. as per

specifications.

118 SITC of 4 U rack for switching mounting with fan and power strip PDU, Hardware Mounting Kit

etc. complete as reqd.

119 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

surface/recess including cutting the wall and making good the same in case of recessed

conduit as required

120 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/

PVC conduit as required.

SH-V: Server Room Allied Services

Gas Supression system

121 Supplying, Installation, testing & Commissioning of 2 - Zone NOVEC/SINORIX 1230 gas based

Fire Suppression System with Gas Release Panel with necessary accessories complete as 1 Nos 45827.00 45827.00 M/R 45827.00

required with BMS Integration etc. complete as reqd.

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

122 Supplying, Installation, testing, Commissioning & positioning of 80.0 Ltrs. Cylinder with Beta

Valve and necessary accessories etc. complete as reqd.

123 Supplying, Filling, Testing & Commissioning of NOVEC/SINORIX 1230 agent etc. complete as

124 Supplying, Installation, testing & Commissioning of Beta Primary Completer Kit complete

- Solenoid With Gauge Assembly

- Manual Pneumatic Actuator

- Flexible interconnecting hose

- Warning Sign and Name plate

- Tee and Connectors

125 Supplying, Installation, testing & Commissioning of Cylinder Supervisory Switch etc. complete

126 Supplying, Installation, testing & Commissioning of End Slave Cylinder Accessories etc.

complete as reqd.

-Pressure Operated Control Head

-Discharge Hose, 2" x 31"

-Master Cylinder Adaptor Kit

-Male Elbow, 5/16' Flare x 1/8" NPT

127 Supplying, Installation, testing & Commissioning of Discharge Nozzle etc. complete as reqd.

128 Supplying, Installation, testing & Commissioning of M.S. Seamless pipes as per ASTM A 106 Gr.B,

schedule 40 with necessary fittings for entire Server Room -A and B etc. complete as reqd. (for 1 Job 125000.00 125000.00 M/R 125000.00

UPS room, battery room & server room)

129 Supplying, Installation, testing & Commissioning of Directional Sounders with 20Hz to 20 KHz

operating frequency with minimum 8 distinct sound patterns to indicate Exit doors and direct

occupants for safe and fast evacuation, complete with MS Powder coated Junction Box for 1 Nos 9339.00 9339.00 M/R 9339.00

mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling

etc. complete as reqd.

130 Supply, Installation, Testing and Commissioning of manual release switch complete with MS

Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression 1 Nos 6724.00 6724.00 M/R 6724.00

glands, cable tags and ferruling etc. complete as reqd.

131 Supply, Installation, Testing and Commissioning of abort complete with MS Powder coated

Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable 1 Nos 1556.00 1556.00 M/R 1556.00

tags and ferruling etc. complete as reqd.

132 Supply and laying of following size multistranded at Copper, Shielded, Fire Survival, Zero

Halogen Low Smoke Armoured cable, red in Colour on existing wall surface etc. complete as M/R

133 Supplying, Installation, Testing and Commissioning of Cylinder Manifold fabricated out of Sch-

40 piping complete as required.

134 Supplying, Installation, Testing and Commissioning of Cylinder Check Valve etc. complete as

135 Supplying, Installation, Testing and Commissioning of Pressure Switch etc. complete as reqd.

Rodent Repellent and Water Leak Detection System

136 Supplying, Installation, Testing & Commisisoning of Microprocessor based Ultrasonic Rodent

Repellent System with stands complete as reqd.

137 Supplying, Installation, Testing & Commisisoning of Satellites/Transducers for all areas and

voids etc. complete as reqd.

138 Supplying, Installation, Testing & Commisisoning of 4 Zone WLD Control Panel along with Power

Supply, In-built charger, Dry Contact Relay with communication port for BMS (For DC area) 1 Nos 22628.00 22628.00 MR 22628.00

etc. complete as reqd.

139 Supplying & Laying of Detection/Sensing Cable 20 mtrs/length etc. complete as reqd.

140 Supplying, installation, testing & commissioning of addressable horn cum strobe (for WLD DSR-2022

System) complete as reqd. 17.2.15

141 Supplying & Laying of following size Copper Conductor armoured cable on the existing wall

surface etc. complete as required.

Digitally signed by AMIT

S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT REMARKS DSR TOTAL MR TOTAL

142 Supply & Installation of 40KVA (with N+N configration) Online UPS three phase input and three

phase output power system of input, voltage range 360V/ 380V/ 400V/ 485V AC, Frequency

range 40Hz - 60Hz +/- 10% output voltage range 415V + 1%, frequency range 50Hz +/1 1% 1255863.00

power factor 0.8/ 3:1 harmonic distrortion - <2% THD (linear load) 5% THD ( non linear load).

Suitable size and Nos. of Valve Regulated Lead Acid (VRLA) Sealed Maintenance Free 1 Sets 1255863.00 1255863.00 MR

batteries in suitable numbers and Ampere hour capacity suitable for 40kva UPS system for

providing 15 minutes back up time at full load, with interconnecting cables, mounting racks /

stands for stacking the batteries, along with connections, interconnections and standard

accessories etc. complete as required. (12V or 24V Cells, 5 year Design life). The Vendor Shall

Provide the complete cslculation of Battery back-up before Quote.

143 Supply, Installation, Testing and Commissioning of Microprocessor Based Transient Voltage

Surge Suppression (TVSS) System with reset facility High/Low voltage protection with following

specifications :-

All Modes Protection : L-L, L-N, L-G, N-G

Connection Type : Parallel

Protection Level : < 0.8 kV

MCOV : Min. 320 Volts

Response Time : < 0.5 nanoseconds

Status Indication : LED, Dry contacts MR

EMI/RFI Attenuation : 40 dB typical

Fusing : Individual Fusing of MOV’s including N-G

Monitoring : Monitoring Status

Enclosure : IP-20

Mounting : Wall Mounting

Certification : UL 1449

143.1 TVSS Capacity : 50KA 0 Nos 226067.00 0.00 MR 0.00

Digitally signed by AMIT