REPAIR TO FENCING, GARBAGE BINS, COMPOUND WALL AND CONNECTED ITEMS AT NABHA AND SANGRUR INCLUDING FENCING, PATH, JOINERY, FLOORING AND PLASTERING AT MES INSTALLATION OF SANGRUR UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Dismantling posts or struts (wood,steel,or RCC) any section, including taking out embedded portion including demolition of concrete foundation and removal of waste material and making good disturbed ground, complete all as specified and directed.

Dismantling fencing wire mesh (Barbed/ chain link fencing) of any size and any dia of wire including removal, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, including removal for excavated soil to a distance n.exc 50 mtrs complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in foundation for post holes, complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates,Gde Fe-410-S as in fencing post / struts incl necessary flat iron,10mm dia MS round bars,drilling holes and binding etc. complete all as specified and directed.

M&L for preparing new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing new steel surfaces of any description, wood, steel, iron, concrete, brick, stone, etc, exceeding 10 cm width or girth and applying two coats of Black bituminous paint, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only chain link fencing steel galvanized fencing of any size, complete all as specified and directed.

S&F mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of shank 11 to 15mm complete all as specified and directed.

M&L for Dismantling wrought iron or mild steelwork of any description not otherwise provided complete all as specified and directed.

M&L for Rolled sections of Fe 410-W (Gde E- 250) quality A as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc complete all as specified and directed.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling complete all as specified and directed.

S&F Fe-410 (Gde E-250) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening complete all as specified and directed. Note - Removing of old gate fixing new steel gate of hold fast , finish the surface included in this item.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring.complete all as specified and directed.

Machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed.

Demolition of brick work/stone boulder masonry, built in cement mortar including all quoins, pillars, etc. but including ashler facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in cm 1:4 with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius complete all as specified and directed.

All as per ser item No. 20 above here-in-before but except bricks complete all as specified and directed.

Taking down cement plaster of any description any thickness from external surface of walls / soffits etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc, finished even and fair without using extra cement, complete all as specified and directed.

M&L Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

Supply only integral water proofing compound ISI marked. complete all as specified and directed.

M&L Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wire to be measured.

Restraining, resecuring including making good staples of Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and provisin of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed.

S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L providing precast Cement concrete louves and jallies 25mm thick set in cement mortar 1:4 complete all as specified and directed.

M&L for brick work in cement mortar (1:4) using Fly ash bricks staight or curved on plan exc in half brick thick wall complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and fair without using extra cement in external surfaces WPC shall be mixed complete all as specified and directed. NOTE-WPC Shall be measured and paid Separately.

S&F Expanded metal,n.exc 4 Kg cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

M&L for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescent salts trading oil and greasy spots etc and applying Two coat of cement base paint complete all as specified and as directed.

Taking down chowkat with shutters (without taking off shutter ) area exc. 1.5 sqm but n exc. 4 sqm each complete all as specified and directed.

Taking down door/window shutter/cupboard shutter with frame (without taking off shutters from the frame) area up to1.5 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Refixing of shutter in the same opening exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Resecuring or easing and adjusting wooden / PVC shutters of any description exc 1 sqm and n exc 2 sq m each including taking down and refixing where ever required and fixing new screws complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall care putty complete all as specified and as directed.

S&F for Pressed steel frames for doors with one or more rebates (Size of frame 125x60mm) including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F for Pressed steel frames for doors with one or more rebates (Size of frame 105x60mm) including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) as in filling to pressed steel frame of door complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick IInd class hard wood glazed and skelton door shutter divided into square, open rebated and prepared to receive glass/gauge etc (without sash barsi) edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass/gauge etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all as specified and as directed.

S&F for Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet re-inforced with M.S square tube, suppyling and fixing in opening as per specification and drg complete all as specified and directed.

S&F for factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for powder coated aluminum section for making frame and shutters of doors, windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading, rubber beading complete all as specified and as directed Note : Glazing, hinges etc shall be measured and paid separately.

S&F Aluminium anodised DG 102 "DECO" grill of size 100mm x 10mm x7mm thick, approved design for windows / ventilators with and including F/U channel, ,complete all as specified and as directed.

S&F for 5.5mm thick sheet glass of ordinary quality and glazing fixed to aluminium shutters in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and as directed.

M&L for Hacking out old broken glass any thickness ,size ,quality and description from wooden frame ,steel frame with putty or fixed with beads complete all as specified and directed.

S&F for 4 mm thick Figured glass and glazing fixed with oil putty in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specifed and directed.

S&F for butt hinges medium weight cold rolled mild steel 75mm complete all as specifed and directed.

S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 100 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed.

S&F for 100 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed.

S&F for 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), complete all as specified and directed.

S&F in repair for 20 mm dia chromium plated Stainless steel pipes for curtain rods including brackets(02 N0s for fixing), stops ,roller complete all as specified and directed.

M&L for preparation of new steel surfaces of any description,over 10cm in width or girth, not otherwise describedand applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth, not otherwise describedand applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

M&L for preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F 300mm ordinary mild steel rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 2mm thick wall care putty filling complete all as specified and directed.

M&L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller complete all as specified and directed.

NARINDER KUMAR SONS (BID ID -3394057)

SAHIL CONSTRUCTIONS (BID ID -3393568)