REPAIRS TO SOFA, RE-CANNING OF VARIOUS CHAIRS AND POLISHING OF VARIOUS WOODEN FURNITURE AT FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

REPAIR OF SOFA SET 5 SEATER [Drg No FD-281/373] Removing of old u/s components/ parts from sofa Set 5 seater and replace with new one as per following specification :-

Teak wood Leg

Teak wooden Arm

Teak wood Side Rail

Teak wood front/rear rail for 3 seater long piece

Teak wood front/rear rail for single seater

Teak wood bearers for 3 seater long piece

Teak wood bearers for single seater

Teak wood battens

Teak wood rail to support back frame for 3 seater long piece

Teak wood rail to support back frame for single seater

SOFA SET 4/5 SEATER [FD-281/373]

Removing of old / worn out unserviceable foam cushions and S&F of 100mm thick 40 density flexipuff foam of size 560 mm x 530 mm, foam encased in white long cloth as approved by Engr-in-charge/GE. Rest all as per drawing/complete all as specified and as directed.

M & L providing new tapestry cloth costing not less then Rs 550/- per meter of approved colour / shade / texture suitable for 560mm x 530mm x 100mm size foam cushion seat / back stitched three sides and provide best quality zip on one side for opening and closing suitable for sofa chairs as per drawing FD-281/FD-373 including taking out old unserviceable/wornout cloth complete all as specified and as directed.

BIN SOILED LINEN MULTIPURPOSE [Drg No : FD-E6/MAP/09] Removing following unserviceable components from Bin Soiled Linen Multipurpose and S&F new components as per the following and fixing the same without disturbing the other parts complete and making functional the furniture as per drg and specification :-

Top of pre-laminated particle board of 18 mm thick OSD exterior grade

Left/Right side pre laminated particle board, 18 mm thick, OSD exterior grade

Drawer of 18 mm thick pre-laminated particle board OSD exterior grade

Shutter of 18 mm thick pre-laminated particle board OSD exterior grade

Bottom base Legs as per existing shape and size with first class hard wood

Bow handle 100 mm long chromium plated

back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing.

M&L for applying one coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

CHAIR VERANDAH [Drawing No FD/ MAP-II/15 & 06] Removing following unserviceable components from chair verandah and S&F new components as per the following and fixing the same without disturbing the other parts complete and making functional the furniture as per drg and specification :-

Seat of Chair Verandah made of PVC

Back of Chair Verandah made of PVC

PVC hard rubber shoe standard quality

Repairs to broken mild steel components of chair verandah with gas welding, including replacing broken /worn out legs with new 20mm dia MS pipe1.6mm thick 75mm to 100 mm long

Painting of Chair Verandah with two coat of synthetic enamel paint white wherever required after rubbing/scrapping surfaces with emery paper for smooth painting. (Note : Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

Stool dressing Cushioned (MAP) [Drawing No FD/E6/MAP/14 Removing following unserviceable components from stool dressing cushioned MAP and S & F new components as per the following and fixing the same without disturbing the other parts shown on drawing and making functional the furniture as per drawing and specification :-

Leg made out of 1st class hard teak wood

Side rail made out of 1st class hard teak wood

Stiffener made out of 1st class hard teak wood

S & F of new foam 75mm thick of 40 density on seat of approved quality as per existing or as directed.

M & L providing cover new tapestry cloth costing not less then Rs 450/- per meter of approved colour / shade / texture suitable for Stool dressing cushioned MAP stitched three sides and provide best quality zip on one side for opening and closing suitable for chairs as per drawing above including taking out old unserviceable/wornout cloth complete all as specified and as directed.

TV Trolly Glass front (MAP) FD/E6/MAP/04(R) Removing following unserviceable components from TV Trolly Glass front (MAP) and S & F new components as per the following and fixing the same without disturbing the other parts shown on drawing and making functional the furniture as per drawing and specification :-

Top of size 830 x 830mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading of the top as specified, shown on Drg and as directed by Engr-in-Charge.

Side left/right of size 680 x 680mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading as specified, shown on Drg and as directed by Engr-in-Charge.

Base of size 680 x 680mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading as specified, shown on Drg and as directed by Engr-in-Charge.

Shelve of size 650 x 600 made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading as specified, shown on Drg and as directed by Engr-in-Charge.

Glass door of size 320 x 660 made of 6mm glass including polishing the sides fixed with hinges shown on Drg and as directed by Engr-in-Charge.

Magnatic Cathcher fixed with suitable size of screw rest all shown on Drg and as directed by Engr-in-Charge.

caster wheel with suitable size of screw rest all shown on Drg and as directed by Engr-in-Charge.

CHAIR DINING (MAP)[Drawing No FD/E6/MAP/10(R)] Removing following unserviceable components from chair dining (MAP) and S & F new components as per the following and fixing the same without disturbing the other parts shown on drawing and making functional the furniture as per drawing and specification :-

Rear leg made out of 1st class hard teak wood

Front leg made out of 1st class hard teak wood

Side rail made out of 1st class hard teak wood

Front Rail made out of 1st class hard teak wood

Rear rail made out of 1st class hard teak wood

Back rest made out of 1st class hard teak wood

Stiffener made out of 1st class hard teak wood

PVC hard rubber shoe standard quality

Top made out of 12mm thick BWR plywood and including S & F of new foam 75mm thick of 40 density with fabric on seat, as per existing or as directed.

M & L providing cover new tapestry cloth costing not less then Rs 550/- per meter of approved colour / shade / texture suitable for Chair Dining (MAP) [Drawing No FD/E6/MAP/10(R)] stitched three sides and provide best quality zip on one side for opening and closing suitable for chairs as per drawing above including taking out old unserviceable/wornout cloth complete all as specified and as directed.

TABLE BED SIDE [Drg No: FD-276 & FD-265] Removing following unserviceable components from Table Bedside and S&F new components as per the following and fixing the same without disturbing the other parts and making functional the furniture as per drawing and specification :-

Top with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including teak wood beading on the top.

Side with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including teak wood beading around the side

Partition shelf made of 18mm yhivk pre-laminated MDF board

Back of 6mm thick ply wood commercial BWR with required size of screw all as specified and as directed by Engr-in-Charge.

SIDE BOARD [Drawing No: FD-26(M), FD-241 & FD-1112] Removing following unserviceable components from Side Board and S & F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

Top of pre-laminated partical board of 18 mm thick OSD exterior grade as per existing shape & size.

Back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing.

Left/right side pre laminated practical board of 18 mm thick, OSD exterior grade.

Drawer of 18 mm thick pre-laminated praticle board OSD exterior grade.

Shutter of 18 mm thick pre-laminated praticle board OSD exterior grade.

Legs as per existing shape and size with second class hard wood.

Bow handle 100 mm long chromium plated

Shelf of of 18 mm thick pre-laminated praticle board OSD exterior grade existing shape and size complete all as specified.

CHAIR DINING FOR ORs [Drawing No FD/MAP-II/05] Removing following unserviceable components from chair dining for ORs and S & F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drawing and specification:-

Seat of Chair Dining made of PVC

Rear leg made out of 1st class hard wood (teak)

Front leg made out of 1st class hard wood (teak)

Side rail made out of 1st class hard wood (teak)

Front Rail made out of 1st class hard wood (teak)

Rear rail made out of 1st class hard wood (teak)

Back rest made out of 1st class hard wood (teak)

Stiffener made out of 1st class hard wood (teak)

PVC hard rubber shoe standard quality

TABLE COMPUTER MAP [Drawing No : FD/E6/MAP/03] Removing following unserviceable components from table Computer and S&F new components as per the following and fixing the same without disturbing the other parts complete and making functional the furniture as per drg and specification :-

M&L removal of unserviceable top of table centre in any position and S&F new table top PFT (Pre Forming Top) made of 18mm thick prelamnated particle board exterior grade, lamination (teak Shade) extended upto minimum 50mm from the bottom ege fixed in position all as specified and directed by Engr-in-Charge.

Key board tray of size 500 x 465mm thick make out of 18mm pre-laminated particle board exterior grade for telescopic sliding channel.

Drawer made out of 18mm pre-laminated particle board exterior grade for telescopic channel.

New telescopic channel for pull out tray, drawer and key board tray of table computer as specified, shown in drg and directed by Engr-in-Charge.

Middle shelf of existing size as specified, shown in drg and directed.

Bottom shelf of existing size as specified, shown in drg and directed.

Side pannel of existing size as specified, shown in drg and directed.

Nylon buffers according to shape and size

25 x50mm rect PVC cover of existing size made to shape as specified, shown in drg and directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying One Coats of Synthetic Enamel Paint (First quality) olive green/ grey paint by spray painting complete all as specified and as directed. (Note: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

TEAPOY VERANDAH[Drg No : FD-255 & FD/E6/MAP/17] Removing following unserviceable components from Teapoy Verandah and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

M&L removal of unserviceable top of teapoy verandah in any position and S&F new table top PFT (Pre Forming Top) made of 18mm thick prelamnated particle board exterior grade, lamination (teak Shade) extended upto minimum 50mm from the bottom ege fixed in position all as specified and directed by Engr-in-Charge.

Hard rubber shoe as per existing of approved quality

M&L Welding to existing broken/cracked joints of teapoy verandah with smooth welding as per standard workmanship/ specification complete all as specified and as directed. (Note - Welding of broken/ cracked joints shall be measured as one unit for one joint).

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying One Coats of Synthetic Enamel Paint (First quality) white / Black paint by spray painting complete all as specified and as directed. (Note: Surface/Patches affected by rust shall be treated with one coat of red oride primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account).

TABLE BED SIDE [Drg No : FD/E6/MAP/15(R)] Removing following unserviceable components from Table Bedside and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

Top with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including black colour PVC edging all round the top.

Pull out tray small made of 18mm thick pre-laminated MDF board exterior grade one side nutural teak faced (Rear and front sides) and 6mm thick commercial ply of BWR grade for bottom with recess handle of approved quality to pull out the tray.

Pull out tray large made of 18mm thick pre-laminated MDF board exterior grade one side nutural teak faced (Rear and front sides) and 6mm thick commercial ply of BWR grade for bottom with recess handle of approved quality to pull out the tray.

Side with 18 mm thick pre-laminated MDF board exterior grade one side natural teak faced.

Back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing.

Hard rubber shoe of standard quality for leg

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying One Coats of Synthetic Enamel Paint (First quality) olive green/ grey paint by spray painting complete all as specified and as directed. (Note: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

Chair Writing [Drg No : FD-280, 250, 20(M] Removing following unserviceable components from chair writing and supply and fix new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

Front leg made out of 1st class hard wood (teak)

Rear leg made out of 1st class hard wood (teak)

Side rail made out of 1st class hard wood (teak)

Rear rail made out of 1st class hard wood (teak)

Front Rail made out of 1st class hard wood (teak)

Arms made out of 1st class hard wood (teak)

Stiffener made out of 1st class hard wood (teak)

Back rest made out of 1st class hard wood (teak)

PVC hard rubber shoe of approved quality

Chair Dining FD [Drg No : FD-280, 250, 20(M)] Removing following unserviceable components from chair dining and supply and fix new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

Rear leg made out of 1st class hard wood (teak)

Front leg made out of 1st class hard wood (teak)

Side rail made out of 1st class hard wood (teak)

Front Rail made out of 1st class hard wood (teak)

Rear rail made out of 1st class hard wood (teak)

Back rest made out of 1st class hard wood (teak)

Stiffener made out of 1st class hard wood (teak)

PVC hard rubber shoe of approved quality

Chair Easy [Drg No : FD-17 (M), 229] Removing following unserviceable components from chair easy and supply and fix new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drwing and making functional the furniture as per drg and specification :-

Front leg made out of 1st class hard wood (teak)

Rear leg made out of 1st class hard wood (teak)

Front/back rail made out of 1st class hard wood (teak)

Side rail made out of 1st class hard wood (teak)

Arms made out of 1st class hard wood (teak)

Rail of seat frame made out of 1st class hard wood (teak)

Rail of back rest frame made out of 1st class hard wood (teak)

PVC hard rubber shoe of approved quality

Recaning of different type of chair and furniture [Drg No: FD-15, 229, 279, 280, 150, 252, 27, 76(M) & FD-2] Removing of old/worn out cane plastic and recanning with 2mm wide half round cane plastic white of superior quality for seat and back (as applicable) and 3mm wide half round cane plastic on the borders locked in at 125mm intervals complete all as per drawing/directed by Engr-in-Charge :-

Chair Dining

Chair Easy

Chair writing

Removal of existing polish from wooden surfaces of under mentioned articles of wooden furniture, cleaning the same using sand paper, smoothing properly without leaving any untouched woooden surfaces and polishing the same with two or more coats of French polish of appropriate shade, as approved / directed by the Engineer-in-Charge :-

Chair Dining (MAP) [Drawing No: FD/E6/MAP/10(R)]

Sofa Set 5 Seater [Drawing No: FD-281, FD-373]

Chair Dining [Drg No: FD-16(M), 228 & 279]

Chair Easy [Drg No: FD-FD-17(M) & 229]

Chair Writing [Drg No: FD-20(M), 250 & 280]

Stool dressing Cushioned (MAP) [Drawing No FD/E6/MAP/14

TV Trolly Glass front (MAP) FD/E6/MAP/04®

Chair Dining for ORs [Drawing No: FD/MAP-II/05]

Side board Drawing No: FD-26(M), FD-241 & FD-1112]

TABLE COMPUTER MAP [Drawing No : FD/E6/MAP/03]

TEAPOY VERANDAH[Drg No : FD-255 & FD/E6/MAP/17]

TABLE BED SIDE [Drg No : FD/E6/MAP/15(R)]

Table bed side [Drg No: FD-276 & FD-265]

Tirupati Buildcon Pvt. Ltd. (BID ID -3124446)

P N GUPTA AND SONS (BID ID -3126318)

RELIABLE TRADERS AND ENGINEERS (BID ID -3124910)

RADHA ENTERPRISE (BID ID -3120181)

Hindustan Traders (BID ID -3124853)