SPECIAL REPAIR TO OR MARRIED ACCN BLDG NO. P - 84 AT ADM AREA, CPE ITARSI UNDER GE (I) (P) FY JABALPUR

Amount

Demolition of Cement concrete (unrein forced) in ground floor and pavings not exc 15 cm tickness (below or above ground level) including surface finishes of any type ie tiles, kota stone and removal of debris to a distance not exceeding 500m complete all as specified and directed.

Excavating over areas,under floor n exc 1.5m deep and getting out Any Type of Soil below floor complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in Sub base to receive floor finish complete all as spciified and directed.

M&L 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection finish the cement concrete surfaces even and fair without using extra cement in panels area n exe 2.0 Sqm each) 6mm wide joints shall be provided throughout the thickness of plinth protection all joints in bays, as well as between walling each shall be filled with mastic filling heated bitumen 85/25 grade 3 partsof sand all as spciified and directed.

M&L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in sub floor finished even rough to receive floor finishes like ceremic tiles complete all as specified.

M&L for Moorum and sand filling under floors or pavings laid in layers n exc 15 cm thick spread, levelled and rammed including watering (Sand and moorun will be mixed in ratio 1:1 in filled under floor) complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

M&L plain cement concrete 1:3:6 type C0 using 12.50 mm graded stone aggregate as in copings, hold fast, back filling of pressed steel frame and other similar work and throating etc including form work all as spcefied and directed.

Cutting chases pining in brick,concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting exc 10 cm but not exc 20 cm girth all as spcefied and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick other than fair finish including dubbing coat if required & finishing with surface even and fair without using extra cement including taking down cement plaster and removal of debris to a distance not exceeding 500m complete all as specified and directed.

M&L for cutting "V" section to cracks in existig roof or terracing/brick wall including cleaning and grouting with cement sand slurry 1:3 including taking down cement plaster and removal of debris to a distance not exceeding 500m complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) mixed with WPC @2% by weight of cement as per manufracturer instruction and finished fair and even complete (Note :- WPC shall be measured & paid separately) and including taking down cement plaster and removal of debris to a distance not exceeding 500m complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3 on ceiling of concrete surfaces and finished the surface even and smooth complete including taking down cement plaster and removal of debris to a distance not exceeding 500m complete all as specified and directed.

Supply only water proofing compound of approved make.

M&L for preparation of new plaster ceiling surface and applying 3 coats of white wash all as spcefied and directed.

M&L for preparation of new plaster surface and applying two coat distemper oil emulsion over and including a coat of JK Birla wall care putty (Applying as per manufractures instruction) all as spcefied and directed.

M&L for preparation of new plastered surface/ prepared wall putty srfaces of wall and applying two coat of exterior emulsion paint over a coat of primer complete all as spcefied and directed.

M&L for complete removal of existing treatment and apply two coat of distemper oil emulsion on old surface over and including a layer of jk Birla wall care putty and making the surface even and smooth and filling the uneven and small holes and making the edges of plaster properly by plaster of paris all as specified and direfcted.

M&L prepration of old decorated plastered or un plastered surface including cornices etc and applying two coat of white wash on ceiling complete all as specified.

M&L for complete removal of existing treatment of wall surfaces appliying one layer of cement base wall care putty as per manufactura's instruction complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc 1.5 Sgm each and making good of disturbed surface match the existing surface all as spcefied and directed.

All as per item No. 21 here-in-before but exc 1.5 Sgm but not exc 4 Sgm each

S&F pressed steel frame of size 125x60mm for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast, including one coat of red oxide primer complete size /profile of frame all as directed.

S&F pressed steel frame of size 105x60mm for door with one or more rebates including necessary fixing lugs, lock striking plates,hinges,hold fast including one coat of red oxide prime. complete size /profile of frame all as directed.

S&F 30mm thick flush shutters, soild core construction, with black board core and plywood face panels with lipping/frame to match complete all as specified and as directed.

S&F 35 mm thick 2nd Class hard wood glazed and skeleton shutters, open rebeted and prepared to receive glass, gauze etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) all as specified & directed.

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing all as specified and directed.

S&F 30mm thick PVC factory made panelled door shutter as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement all as specified and directed.

S&F of Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe-290 Gde E-165 all as specified and directed.

S&F box type steel windows and ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes complete all as specified and directed. Note :- The quoted rate a shall also include. (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface. (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii) PCC block for embedding lugs. (iv) Including 1o mm sq bar security grills.

S&F 100mm size MS butt hinges medium wt cold rolled all as specified and directed.

S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of etruded section and fixed as specified.

S&F Aluminium alloy, anodised, 300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedstaple plate and fixed complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed.

S&F of Floor door stopper 140mm of Overall length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F100mm long hasp and staple, aluminium anodised, including bolt to hinges plate and fixed with screws all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified.

S&F of wire netting as chicken wire mesh of galvanised steel wire 0.71mm dia and size of mesh 25mm for cracks fixed with nails etc complete all as specified and directed.

M&L Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth.

M&L for prepration of pre primered steel surfaces and applying two coats of synthetic enamel paint all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic edge cut tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exceeding 0.18sqm as in floors set & jointed in neat cement slurry & pointed in white or coloured cement to match the tiles laid over including screed bed 15mm thick in cement mortar (1:4) for laying floor finished complete all as specified and directed.

M&L for non skid coloured ceramic edge cut tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exceeding 0.18sqm as skirting in neat cement slurry & pointed in white or coloured cement to match the tiles laid over including rendering of 10 mm thick in cement mortar (1:4) for laying floor finished complete all as specified and directed.

M&L for non skid coloured ceramic edge cut tiles 7-8mm thick (square/rectangular) area of each tile exceeding0.06 but not exceeding 0.11sqm as in floors set & jointed in neat cement slurry & pointed in white or coloured cement to match the tiles laid over including screed bed 15mm thick in cement mortar (1:4) for laying floor finished complete all as specified and directed.

M&L for glazed ceramic coloured edge cut tiles 300x450x7mm thick on vertical surfaces such as skirting dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L 20-25 mm thick cuddapa prepolished stone over and including 15 mm thick cement mortar (1:4) bedding laid & jointed with slurry cement mixed with pigment to match the shade of the slab including rubbing and polishing,rounding to edge of stone slab one edge,such as steps,cooking plateorm and similar situtions complete all as specified.(Note-Hole in stone slab for accomodate the gas pipe where required complete.

Dismantling of existing PVC Water tank and S&F PVC water storage tank of 500 ltr capacity including S&F 20mm dia pvc float valve assembly complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe all as specified & directed.

S&F 20 mm GI Tank nipple suitable for HDPE water tanks including necessary driling holes etc fixed complete.

S&F sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plug washers and waste pipe including fixing contilever bracket and connecting union to pipe over all size 495 mmx 420 mm bowl size 410 mm x 330 mm x 160 mm all as directed.

S&F in repair pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia.

Taking down GI tubing 15mm bore of any description including cleaning for refixing or removal to store.

All as per item No. 54 here-in-before but 20mm bore.

S&F GI tubing 15mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors.

All as per item No. 56 here-in-before but 20 mm bore.

Refixing old GI pipe 15 mm bore & connections in new or old position to walls and ceiling or laid in floor all as specified & directed.

Refixing old GI pipe 20 mm bore & connections in new or old position to walls and ceiling or laid in floor all as specified & directed.

S&F in repair 15mm bore bib tap chromium plated fency type. cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair 15mm bore angle valve /stop valve chromium plated fency type.cast copper alloy screwed down high pressure, crutch or butterfly handle, screwed both end for pipe or for unions complete chromium plated with suitable type as directed.

Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&Fin repair PVC low level 10 litre capacity valveless syphonic action type flushing cistern with inlet ball valve float and handle including brackets and necessary fittings etc fixed in repairs complete all as specified and directed.

S&F in repair viterious china squtting pan "ORISSA PATTERN" size 580x440mm white with integral foot rest and flush pipe complete including provision of concrete bedding all as specified and directed.

S&F in repair WHB white size 550x400mm vitreous china (flat back or angle back type) any size including cutting for and pinning end of bracket or eracting stand but exclusive of fixing of supply and waste pipe complete all as directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats. (minimum weight 190grms) all as directed.

S&F PVC connection 15mm bore size with PTMT nuts of length 450mm long.

M& L 15mm shower Brass chromium plated shower rose 125mm sizeincluding fixing to steel pipe or union complete all as specified shower arm 195mm long all as directed.

S&F in repair 75 mm out let PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate all as spcefied and directed.

S&F in repair 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

S&F in repair 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

S&F PVC (SWR) junction double, 110mm dia (single T), equal or unequal access door all as specified.

S&F PVC (SWR) bends 110 mm dia provided with access door all as specified and directed

S&F PVC (SWR) bends 110 mm dia all as specified and directed

S&F PVC (SWR) bends 75 mm dia all as specified and directed

S&F PVC (SWR) bends 75 mm dia provided with access door all as specified and directed

S&F PVC (SWR) cowl 110 mm dia all as specified and directed

Demolition of reinforced cement concrete in floors, beams, chajjas, landing slab in any position or height and similar suspended works all as directed.

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggrigate)as in slab, chajja, landing slab in any position or height and similar suspended works. etc complete all as directed..

M&L cleaning surface of sunken portion wall/bottom and applying cement slurry @1.2 Kg per Sqm and applying 15 mm thick cement plastred in CM 1:3 finished even and fair using extra cement and applying two coat of acrylic polymer modified cementious slurry as per manufactureas instruction to make the surface leak proof complete all as specified and directed.

S & F of 20 mm Stainless steel drapery curtain rods anodised aluminium alloy chromium plated with fixing brackets, stops, rollers and finnels etc. and with all necessary fittings complete all as specified and directed.

Demolition brick work or stone / boulder masonry built in cement mortar as in wall etc including removal of debris to a distance not exceeding 500m complete all as specifed and directed.

M&L for brick work with sub class 'B' brick old size bricks in CM (1:4) straight or curved on plan exc 6m mean radius as in parapet wall etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc all as directed.

M&L PCC 1:3:6 type C2 in Surface channel or drains including necessary form works, stops, moulds etc incl demolition of concrete all as directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in chajja roof covering/cladding to wall, fixed with self tapping screws as specified with 'J' or 'L' hook / suitable screw complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E 165 all as specified and directed.

M&L for heavy duty exterior grade tile texured finish of 300X300X10 mm thick vitrified tile laid over and including 15 mm thick rendering in CM 1:6 as in steps complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board interior grade, prelaminated on both side with decorative choice lamination fixed with screws to timber frame work including teak wood beading complete all as specified and directed.

M&L pressed steel frames for cup board chokhat of size 60x40mm with one or more rebates incl necessary fixing lug, hold fasts etc and one coat of redoxide primer complete all as directed.

Taking down/removing the existing roof treatment including bocking coat if any and disposal of debris to a distance not exceeding 100m, 15mm cement screed bed in CM 1:4 on roof surfaces and incl benching or concrete surfaceby weight of s mixed wit WPC @3% by weight of cement and finished the surface even and smooth without using extra cement complete (WPC measured& paid separate) rending in cm 1:4, 10mm thick over roof surface finishing fair and even without using extra cement including mixing with WPC as per manufactur instructions and primering the plastered surface using bitumen primer @ 0.3Kg/Sqm and applying water proofing treatment using 3mm thick Acetic poly propylene (APP) Membrane modified pre fabricated with non woven polyester reinforced established Weight not less than 3.6 kg /sqm laid over a coat of bitumen 85/25 @ 1.2 Kg / Sqm as per manufactures instructions complete all as specified and directed by Engineer in charge.

Material and labour for 50 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in roof padding laid in two layers of 25 mm each including. welded wire mesh will be placed between two layers of concrete and finished fair/ even with out using extra cement complete all as specified and directed. False groove shall be made in top surface of concrete complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

INTERNAL ELECTRIFICATION :- Taking down carefully aluminium / copper point wiring with surface/concealed PVC conduit or wooden batten (light, fan, socket, bell or power) including sunk in cast iron / pressed steel terminal boxes except fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc complete.

M & L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed rigid non mettalic PVC conduit medium grade (make of conduit-Presto Plast/Pressfit) not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes,conceled in wall of make & maching the existing surface ) with 2.8 mm thick hylum brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators etc and 1.5 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly one light point/fan point controlled by one switch complete (Make of cable-Finolex/Havells/Policab) all as specified and directed.

All as per item No. 95 here-in-before but one light point controlled by two way switch

All as per item No. 95 here-in-before but one socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 95 here-in-before but one socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 95 here-in-before but one bell / buzzer controlled by one bell push.

All as per item No. 95 here-in-before but with 2.5 sq mm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 1.5 sq mm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

Supply and Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP/DP 10A- 20 Amps with complete accessories all as specified and as directed and directed by Engr in Charge as per site requirement.

Material and labour in repairs for sub main wiring with two single core 6.0 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring including 6.0 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in conceled in wall of make & maching the existing surface make & maching the existing surface and making good to the disturbed surfaces to match the existing surfaces complete including taking down existing unserviceable submain of any size all as specified and directed. Note :- Two runs of 6.0 sqmm copper conductor cable, one run of 6.0 sqmm copper conductor and one run of PVC conduit will be measured as one unit.

S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed.

S & F Ding Dong bell AC, 240 volts single pole complete all as specified and directed.

S & F Modular Bell push 6A 1 module complete all as specified and directed.

S & F Fan step regulator, 120W, 240 volts 2 module complete all as specified and directed.

S & F Modular switch 1 way 6A, 240 volts 1 module complete all as specified and directed.

S & F Modular switch 2 way 6A, 240 volts 1 module complete all as specified and directed.

S & F Modular switch 1 way 16A, 240 volts 1 module complete all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F White cover plate with frame, 1 module complete all as specified and directed.

S & F White cover plate with frame but 2 module complete all as specified and directed.

S & F White cover plate with frame but 3 module complete all as specified and directed.

S & F White cover plate with frame but 4 module complete all as specified and directed.

S & F White cover plate with framebut 6 module complete all as specified and directed.

S & F White cover plate with frame but 8 module complete all as specified and directed.

S & F White cover blanking plate1 module complete all as specified and directed.

S & F Metal flush box 1/2 module complete all as specified and directed.

S & F Metal flush box 3 module complete all as specified and directed.

S & F Metal flush box 4 module complete all as specified and directed.

S & F Metal flush box 6 module complete all as specified and directed.

S & F Metal flush box 8 module complete all as specified and directed.

Supply and fixing Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete including 5W LED lamp complete all as specified and directed.

S & F Endura Linear Neo surface and wall mounted LED batten 22 Watt, extruded aluminum housing for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver environmental friendly, energy efficient ready to use pack housing with reflector cover channel, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make - Havells cat Part No. ENDURALINEARNEOBS22WLED830SPCWH/Wipro/ Bajaj/Surya/Crompton/Philips.

S & F Decorative Endura Linear Neo LED lighting fixture 10 Watt, 6000K, (581 mm) with extruded Al heat sink, environmental friendly, energy efficient ready to use pack housing with reflector cover channel, with electronic driver, holder, including LED tube 10 Watt connector block, etc complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make - Havells Cat Part No. LHEWEBP7IN1W010/Wipro/Bajaj/Surya/Crompton/Philips.

Supply & fixing for Bulkhead fitting LED 08 Watt (RUGBY) type complete and fixing to wall / ceiling including fixing arrangement with clamps/ screws/nuts/ bolts /washers etc connecting with provision of flexible cable of 1 mtr length connection with 0.5 Sqmm PVC insulated twin core multi stranded copper cable complete including taking down existing unservicable lighting fixture of any type and size all as specified and directed. Make : Havells Cat Pat No. LHKL01160099 or equivalent to Wipro/ Bajaj/Surya/Crompton/Philips.

Taking down Energy meter/Main Switches of any size after disconnecting supply and kept in safe custody, taking down & remove the old wooden meter box from site, plastering the existing disturbed wall surface including colour wash and refixing the Meter/Main Switches again with connection complete all as specified and directed.

Taking down MCB DBs /MCBs of all sizes after disconnecting supply complete all as specified and directed.

S & F sheet metal enclosure MCB DB 4 way tripple pole and neutral 415 volts complete all as specified and directed.

Supply and Fix for sheet metal enclosures for SPN DB's 240 volts, factory made double door flush type, IP-42 protection and all as per IS-8623, made from sheet metal 12 way 200 Amps rated bus bar to be fixed with wall all accessories complete all as specified and as directed.

S & F MCB single pole 240 volts 6 to 32 Amps complete all as specified and directed.

S & F MCB double pole 240 volts 16 to 40 Amps complete all as specified and directed.

S & F MCB TPN 63 Amp 440 Volts complete all as specified and directed.

Earthing complete with glavanised steel earth plate elactrode 600x600x6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground leves) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No. 3 of MES schedule part - I. Note :- (i) Item of earthing includes cost of excavation, removing, PCC Chamber, 15mm bore medium grade GI protection Pipe (7.5 Meters long) for earth lead any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.

Supply and fix for LED street light fitting made out of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with10KV Built-in Surge Protective Device(LED lamp suitable for 40 Watts, 240 volts, AC, 50Hz) and GI pipe 40 mm dia, light grade for mounting bracket bent to shape 1.50 RM and fixing arrangement with two Nos of MS clamps set, nut bolts, washers of suitable size complete including taking down the existing street light fittings of any capacity and removing the site complete all as direcetd and as specified. Make- Havells Cat Part No ENDURAPEARLNEOSL40LED757PASYTOPC of equivalent make of Wipro/ Bajaj/Surya/Crompton/Philips.

EXTERNAL ELECTRIFICATION :- Materials & labour in replacement of 1100 volts grade heavy duty XLPE cable of size 25 Sqmm 4.0 core, passing through GI pipe with aluminium conductor stranded polyethylene insulated, conductor served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete including taking down existing unserviceable UG cable of any type and size all as specified and directed.

Excavation in trenches in any type of soil (loose/ hard) not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out for foundation of pole, laying under ground cables etc and getting out complete all as directed.

Returning filling in with the earth obtained from above item including spreading, levelling, watering and well ramming in layers and not exceeding 25 cm in layer complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 Mtr and deposting where directed at a level not exceeding 1.5 Mtr above the starting point all as directed.

M & L sand filling in trenches for cable cushioning with clean, dry and unwashed sand free from sharp particles including gently punning around cable complete all as specified and directed.

M & L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified.

M & L of GI pipe light grade 80mm dia bore with all fittings and fixed complete to wall, to pole or laid in trenches and road crossing complete including taking down unserviceable GI pipe of any size all as directed.

M/s SHIVRATAN CONSTRUCTION

TANUJ CONST. CO.