PERIODICAL SERVICES, PLASTERING TO CERTAIN BLDG IN OTHER THAN MH UNDER GE (U) MEERUT CANTT.

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair extra cement, all as specified .

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair extra cement, all as specified .

M&L for 05 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, all as specified .

M&L carrying out treatment in following step as given below:- Step (i) M&L for complete removal of existing treatment by scrapping with wall sandar as approved having RPM not less than 1500 sanding pad of 80 Grit having dia 17 cm to 25 cm to make the surface free from dust, loose paint etc. from existing plastered surfaces of wall. Step (ii) M&l for applying waterproof cement based putty @ 1 kg per Sqm of average thickness 1 mm of approved make over prepared surface and sanding of the putty surface with sandar machin of approved make having RPM 1500, dia 17 cm to 25 cm make the surface free from dust. Mix the putty powder by adding 40-50% water and mix it with Asian Paints or equivalent as per list of makes Trucare Putty mixer Step (iii) M&L for one coat of acrylic water passed exterior grade primer @ 0.9 liter per 10 sqm diluted with water in 1.1 ratio to be applied with fully automatic airless spray machine. Step (iv) M&L for water based premium acrylic smooth exterior emulsion paint of approved make with low VOC less than 50, Anti Algal properties in two coats applied over priming coat with fully automatic airless spray machine of paint application.

Removing existing paint by mannual scrapping and sanding with TruCare Wall Sander: L-01/H-01(having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall surface complete all as specified and directed.

Providing and applying waterproof cement based putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, of Asian paints or its equivalent over the plastered/old painted wall after scrapping to prepare thenew or old surface even and smooth on wall surface complete all as specified and directed. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints or equivalent as per list of makes Trucare Putty mixer Step 2 : Allow 6-8 hrs time to dry the putty surface.

Sanding of the putty surface with Asian Paints or equivalent as per list of makes Tru Care Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified.

M&L for applying one coat of acrylic waterbased interior grade primer @ 0.8ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied. by skilled labour on old or new wall surface complete all as specified. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc

M&L for applying two coats of oil bound distemper applied over priming coat on wall surface complete all as specified. Note- Allow 6-8hrs to dry the surface for painting of subsequent quotes.

Preparation of old/new decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed.

M&L for applying two coats of plastic emulsion on wall surface complete all as specified and directed.

M&L for applying one coats of Oil bound distemper on ceiling surface complete all as specified and directed.

M&L for applying one coats of Oil bound distemper on wall surface complete all as specified and directed. Note for Item No. 5 to 14 :- 1. These items shall be carried out by authorised applicator of manufactrer. Make: (Asian/Burger/Shalimar or equivalent approved by GE). 2. The MOU between contractor, manufacturer and Authorised applicator shall be uploaded online alongwith other documents of tender by tenderer and the same shall be approved by Accepting Officer.

M&L for Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Cleaning of tiling work in floors and walls using suitable chemical or solvent as per manufacturer''s instructions duly taking care not to damage glaze of tiling work, including necessary filling of joints/grouting with white cement and removing any loose debris or dirt etc. complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old/new decorated internal wall/ceiling surface by sand paper of reqd sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface and applying one coat of White wash/colour wash complete all as specified and all as directed.

M&L for preparation of old/new decorated external wall surface by sand paper of reqd sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface and applying one coat of cement base paint complete all as specified and all as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3 mm thick all as specified

Cutting shrubs wild gorwth/trees and removing complete vegetation growth from external walls and roof of building including taking out roots from roof, brick wall or concrete surfaces and making good the distrubed surfaces with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate and disposing the rubbish from the site (MOD land) for a Md Accn block up to 4 storey, complete all as specified.

Taking Down Cement plaster/duster bed PCC of column, chajja , paraphet of roof, facia, drops, ceiling etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4 (average thickness of PCC 25 mm) as required brushing neat cement slurry with 3.0 kg of cement per sqm including necessary form work and scaffolding upto 4 storey floor including fixing of wire netting where required to match the existing surface.

M/S KAPIL ENTERPRISES (BID ID -3363916)

M/s D.K.Enterprises (BID ID -3367305)