SPECIAL REPAIRS OF TOILET BLOCK NO. T-132/B, T-126 AND T-57 IN ME LINES OF COD DEHU ROAD UNDER GE DEHU ROAD.

Amount

Excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in soft/loose soil for foundation etc. complete all as specified and as directed by engr-in-charge.

Excavation in trenches, exc 1.5 m deep and n exc 3 m getting out in soft/loose soil complete all as specified and as directed by engr-in-charge.

M&L Cement concrete 1:4:8 (40mm graded stone aggregate) as in foundationn, filling and mass concrete, complete all as specified and as directed by engr-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position not ohterwise specifically provided for .complete all as sspecified

Demolition of brick/stone masonry built in cement mortar all as specified.

Material and labour for Modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in mortar CM 1:6, complete all as specified and as directed by engr-in-charge.

M&L for 50 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge..

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge.

M & L for Glazed ceramic coloured tiles of size 300 mm X 450 mm X 7 mm to 8 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300x200x 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M & L for hot rolled mild steel in roof trusses (framed ) trussed , purlins, crane gantries , rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections etc) including distance pieces, cleats etc. of Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed by engr-in-charge.

M & L for hot rolled mild steel in wind ties for roof including securing bolts, posts and struts in fencing etc. of Fe 410 (Gde-E-250) complete all as specified and as directed by engr-in-charge.

M & L for Mild steel screw bolts (machine made) 11 to 15 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm but n.exc 30 cm complete all as specified and as directed by engr-in-charge.

Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.

Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces Surfaces of any description, n.exc 10cm in width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.

S & F for 0.50 mm thick pre painted/coloured galvalume Al zinc coating GI based corrugated steel sheet of an colour having tensile strenth of 550 Mpa as in roofing and wall cladding etc.fixing all as per manufactures instructions fixed on roof and wall with all fittings and accessories etc. complete all as specified and as directed by Engr-in-charge.

Ditto as per item 25 above but plain sheet as in ridge/ viev cutter/ vally gutter, etc complete all as specified and as directed by Engr-in-charge.

M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface without using extra cement.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m complete all as specified and directed.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) in chajja spcomplete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items in?cluding edges

M & L for TMT Bar 10 mm dia and over cut to length bent to shape required including cranking , bending binding spirally for hooping for colomns, footings, plinth beams hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, TMT Bar etc. complete all as specified and as directed by engr-in-charge.

M & L for TMT Bar of 8 mm dia and over cut to length bent to shape required including cranking , bending binding spirally for hooping for colomns, plinth beams hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, TMT Bar,in stirrups etc. complete all as specified and as directed by engr-in-charge.

M&L for providing reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slabs, Manhole cover etc.complete all as directed by Engr-in-charge.

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.

S & F hume pipe septic tank 100 users capacity including all excavation earth work required including vent pipe, cowl, rcc covers, plasters and connecting the new septic tank to the incoming sewer lines and connected to soak pit directed.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 200 mm .

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 200 mm bore RCC pipe.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 300 mm .

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 300 mm bore RCC pipe.

S&F 15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs .

S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC including waste pipe all as specified and directed.

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S & F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.

Supply only in repair 20mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, size 20mm dia and Minimum wt (for 20mm -210gms) (Make: Prayag/Shakti) complete all as specified and directed.

Supply & fixing 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..

S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S&F C P floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)..

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors

S & F 75 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal

S & F PVC (SWR) 110 mm bore vent cowl

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe.

S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall.

S&F Anodised aluminium Powder coating frame for ventilators & windows with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, all louvers arrangements, screws with powder coating of any colour Complete all as specified and directed.

Supply & Fixing Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings and fillets complete all as specified and directed.

Returning filling in incl speading , watering, and well ramming in layer complete all as specified and directed by engr-in-charge

Removal of surplus soil to a distance n exc. 100 M & depositing where directed at a level n exc. 1.5 M above starting pointetc. complete all as specified and as directed by engr-in-charge.

M & L for Coloured Machine pressed precast concrete interlocking coloured (glossy finish) paver block any shape and size confirming to IS 15658-2006 of 75 mm to 80 mm thickness M-40 Grade with grey cement and no pigment etc complete all as specified and as directed by engr-in-charge.

M & L for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed by engr-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for point wiring with 1.5 sqmm single core multistranded copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl in stove enamelled steel conduit & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

One light points controlled by one switch one way

One fan/exhaust fan point controlled by one switch & regulators

One security light points controlled by one switch one way

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 6 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 6.0 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 6.0 sqmm cable, one run of 6.0 sqmm cable and one run of PVC casing capping/Conduit will be measured as one RM).

S&F switch piano flush type single pole one way 5 Amps

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

supply and fix in repair MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 04 way

Supply and fixing 6 - 32 amp rating SP, 240V,'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning.

Supply and fixing 32 amp rating SPN, 240V,'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning.

Supply and fixing in replacment of LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : ENDURAPEARLS35WLED757SASYTOPC of Havells or equivalent inPhilips/ Bajaj/ CG/Luker

H S TAKHI (BID ID -3163442)

DINESH CONSTRUTION (BID ID -3162963)

Star Construction (BID ID -3162992)

S Y Itkar Construction and Company (BID ID -3163487)

M/S B.A. GAIKWAD (BID ID -3162712)

DR J S CHADHA AND SONS (BID ID -3163676)

RAMESH PATIL (BID ID -3163476)