Repair/Maint to street lights and other lights in AOR of MPH and other locations under GE (Utilities) Udhampur

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables, foundation of poles, stays and getting out in any type of soil complete all specified & directed by Engr-in-Charge.

Returning , filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all specified & directed by Engr-in-Charge.

Removing of excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified & directed by Engr-in-Charge.

Painting to steel tubular poles 9/12 metre long with two coats of aluminium paint including brackets, clamps, nuts bolts, washer etc. including making yellow and black strips alternatively (30 cm width each) on pole upto 1.5 metre from the ground level and marking of pole Nos with black paint having back ground yellow as per existing complete all as specified & directed by Engr-in-Charge.

Terminal box made out of SMC with hinged door and locking arrangements of size 140x140x95mm (in repair) including Backlite 4 way connector,M.S. Clamps suitable for pole ,PCC/MS/GI/rail etc. with bolt, nut and washer ,electrical connections including MCB SP 6-32 Amps complete all as specified and as directed by Engr-in-Charge. Make - Sintex product code No GSJB-1414 or its techno commercial or equivalent from the list of make given in particular specification.

Replacement of old unserviceable rusted GI tubing brackets, 40mm bore, light grade with new GI tubing bracket, 40mm bore, light grade, 1.20 metre length ,made to shape including MS clamp with nuts, bolts and washers etc complete all as specified & directed by Engr-in-Charge.

Constant current LED driver (in replacement) for energy saving & environment area light fitting > 90 watts security light with active power factor correction (APFC) electronic driver. LED driver 90 watt with operating voltage between 100-270V AC of existing specification & make complete all as specified and as directed by Engr-in-Charge.

Constant current LED driver (in replacement) for energy saving & environment area light fitting > 60 watts security light with active power factor correction (APFC) electronic driver. LED driver 60 watt with operating voltage between 100-270V AC of existing specification & make complete all as specified and as directed by Engr-in-Charge.

Taking out UNSV two core/three core aluminium / copper cable of any sizes/ capacity complete all specified & directed by Engr-in-Charge.

S & F PVC insulated and sheathed 2.5 sq mm Three core multi stranded, copper conductor cable from junction box/OH line to street light fitting or for engagement lights complete all specified & directed by Engr-in-Charge.

S & F PVC insulated and sheathed 1.5 sqmm, three core, multi stranded, copper conductor cable from junction box/OH line to street light fitting or for engagement lights complete all specified & directed by Engr-in-Charge.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 10 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified & directed by Engr-in-Charge.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 6 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified & directed by Engr-in-Charge.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 4 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified & directed by Engr-in-Charge.

Taking out UNSV XLPE UG cable of any sizes/ capacity complete all specified & directed by Engr-in-Charge.

XLPE insulated, armoured, aluminium conductor cable, 1100 volts grade, heavy duty, cross sectional area 16 sqmm, 4 core, laid in trenches/ducts/through pipe complete all as specified and directed.

All as per Srl item No 16.00 here-in-before but cross sectional area 16 sqmm, 2 core.

All as per Srl item No 16.00 here-in-before but cross sectional area 10 sqmm, 2 core.

Double walled corrugated pipe (DWC) of size 50 mm conforming to IS14930 (Pt-II:200)/IS16205 Pt-I 2017,IS-16205 Pt-24 : 2018 with necessary snap fit coupler complete all as specified & directed by Engr-in-Charge.

S & F LED Highbay light with lens , 150 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make:-Philip, Crompton, Bajaj Cat No OPTIBAY150W WHNBPCSD or equivalent from the list of make given in particular specification.

S & F LED flood light, 200 watt, with lens , 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make- Philip, Crompton, Bajaj Cat No GLEAM F 220L WH SY PC SD V2 or equivalent from the list of make given in particular specification.

S & F LED flood light, 150 watt, with lens , 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make- Philip, Crompton, Bajaj Cat No GLEAM F 165L WH SY PC SD V2 or equivalent from the list of make given in particular specification.

S&F Multi Colour (Red, green, orange ) LED flood light, 150 watt, with lens , 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Cat Part No Bajaj-BAFL IN1 150 W RGB/RGBW, Havells, Crompton &b Philips

S & F LED flood light, 120 watt, with lens 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make :- Philip, Crompton, Bajaj Cat No PRAZEF144LWHNB-A5TGSDMT or equivalent from the list of make given in particular specification. Note: For item Serial no 20.00 to 24.00 (a) MS clamp,Brackets required for fixing of fitting are inclusive of rate quoted. (b) Necessary grouting/making good on existing surfaces in inclusive of rate quoted. (c) GI pipe of required dimensions if required at site shall be provided by the contractor.

S & F LED flood light,50 wat, with lens 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make :- Philip, Crompton, Bajaj Cat No GLATT F 50L WH PO PC SD or equivalent from the list of make given in particular specification. Note: For item Serial no 25.00 to 30.00 (a) MS clamp,Brackets required for fixing of fitting are inclusive of rate quoted. (b) Necessary grouting/making good on existing surfaces in inclusive of rate quoted. (c) GI pipe of required dimensions if required at site shall be provided by the contractor.

S&F LED street light fitting withlens , 90 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Note :- Necessary fixing authority including reducers may be included in rate Make- Philip, Crompton, Bajaj Cat No ZELA P 108L WH PO TG SD or equivalent from the list of make given in particular specification.

LED street light fitting with lens 70/72 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Note :- Necessary fixing authority including reducers may be included in rate Make :- Philip, Crompton, Bajaj Cat No ZELA P 86L WH PO TG SD or equivalent from the list of make given in particular specification.

LED street light fitting with lens , 60 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Note :- Necessary fixing authority including reducers may be included in rate Make:- Philip, Crompton, Bajaj Cat No ZELA P 72L WH PO TG SD J or equivalent from the list of make given in particular specification.

S & F appointment light LED 10 watts complete all as specified and directed by Engr-in-Charge.

Post top lantern, LED Warm white , type 40 watt , 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection complete all as specified and directed by Engr-in-Charge. Make:- Philip, Crompton, Bajaj Cat No BGCTNP 40W LED WW or equivalent from the list of make given in particular specification.

LED bollard Warm white lights of 11 watt capacity including taking down existing unserviceable garden lights of any type/capacity complete all as specified and directed by Engr-in-Charge. Make:Philip, Crompton, Bajaj Cat No BGBOL 605 9W LED WW or equivalent from the list of make given in particular specification.

S&F in replacement of automatic street light control switch of 18-21 KW three phase(40 Amp per phase) having protection IP-66 using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitabe rating power contractor (s), one Incoming and three Outgoing MCBs rating of 40 Amps & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection class-2 (Hansel make). The circuit should be also have provision for manual operation (i.e. sensor by pass option) complete all as specified and directed. Model No SWADEEP 66- 18 KW3P, L&T, Havells

polycarbonate globe with gallery 300mm dia round suitable for retrofit LED lamp B22 Base (in replacement) complete all as specified & directed by Engr-in-Charge.

LED lamp warm white/white 9 Watt (in replacement) complete all as specified & directed by Engr-in-Charge.

LED lamp warm white/white 7 Watt (in replacement) complete all asspecified & directed by Engr-in-Charge.

MCB TPN -63 Amp, 230V, 50Hz,10 KA (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB SPN -40 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB SPN -32 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified & directed by Engr-in-Charge.

MCB SP-10 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified & directed by Engr-in-Charge.

Supply and fixing weather proof hanging light fitting made of aluminium/ pressure die cast housing single piece bottom up to mounting of 60mm outer dia of pole / pipe , Size of fiting 580mmx340mm with opal froasted protector duly dilicon filled , UV resistant PU/ Powder coated paint Lacquer coated. As antique finish with highly effacing electronic external driver, high voltage protection. Make- DM Enterprises cat No-DM-8010-BKT-05-12-6025/ or equivalent from the list of make given in particular specification.

S &F LED Tiranga Rop light 18 Mtr,IP 65,Input Power 10W/meter,Input Voltage 220-240 VAC Input frequency 50 Hzs,Input current 0.045 Amp/Mtr,Power factor 0.95,Width of strip(+/- 0.1 mm) 8 mm length/reel-18 mtrs,No of led per mtr 120 LED,LED Beam angle 120 degree ,Rope light per Colours length 6 mtr orange, 6 mtr white ,6 mtr Green,Fixing method silicone clip ,Ingrass Protection -IP -65, Ingrass protection method silicone tube ,silicone tube dimention 11.5x5.5 mm+/- 0.5 mm,working temp range-20 degree celcius to + 45 degree celcious ,working humidity range 10-90 RH and all as directed by engineer in charge. Make: Havells, Wipro, Crompton & Philips

Supply and erecting steel tubular swaged poles erected to truly vertical or planted as strut complete with 6mm thick mild steel base plate(300mmx300mm), welded to pole, finial taper plug, bolts, nuts, and screws. Poles made out of ERW MS tubing conforming to IS-2713 Part-II Type 410 SP-37, 9 mtr long including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally and portion embedded in concrete, making five black & white bands at lower portion of pole each 300mm wide alternately upto the height of 1.5 m and marking pole No. with black paint at suitable height including making two nos holes of suitable size in steel tubular pole by gas welding for passing PVC cable connection from junction box to security lights through pole where junction box to be fitted in pole complete all as specified and directed by Engineer-in-Charge. Note: - Excavation, Earth Work and PCC in foundation shall be measured and paid for separately.

Plain cement concrete M- 7.5, (1:4:8), type D-2 (using 40mm graded crushed stone aggregates) as in foundation complete all as specified and directed by Engr-in-Charge.

Plain cement concrete, M-15, type B-0 (using 12.5 mm graded crushed stone aggregates) as in coping complete all as specified and directed by Engr-in-Charge.

vijay kumar gupta and co (BID ID -3302884)

PROACH ASSOCIATES BUILDERS & ENGINEERS (BID ID -3303845)

DEV RAJ MAGOTRA (BID ID -3303744)

slathia construction works (BID ID -3309267)

MODI CONSTRCUTION COMPANY (BID ID -3307525)